| IR280 Parts List |
| Item | PartNumber | PartDescription | IREquivalent |
| 1 |
| TriggerHandle Assembly |
|
|
| Inside(for 280 and 280-S6) | 1712-A92 |
|
| Outside(for 280-6) | 280-A1 |
| 2 |
| GreaseFitting | 130SR-188 |
| 5 |
| Trigger |
|
| 8752 | for1712-A92 (280 and 280-S6) | 834-93A |
|
| for280-A1 (280-6) | 844-78 |
| 6 |
| TriggerPin |
|
|
| for1712-A92 (280 and 280-S6) | 534-265 |
|
| for280-A1 (280-6) | F02-15 |
| 7 | 8599 | ThrottleValve Plunger | 2934-302 |
| 8 | 8598 | ThrottleValve Assembly | 2934-A50 |
| 9 | 8554 | ThrottleValve Face | 2934-159 |
| 10 | 8555 | ThrottleValve Spring | 834-51 |
| 11 | 8650 | StraightInlet | 845-565 |
| 12 | 8556 | AirStrainer Screen | 434-61 |
| 13 | 8557 | ReverseValve Seal | R00BR-210 |
| 15 | 8558 | HandleGasket | 2934-283 |
| 16 |
| MotorClamp Washer | 2934-207 |
| 17 | 8175 | RearEnd Plate | 2934-12 |
| 18 | 8559 | RearRotor Bearing | 508-97 |
| 19 | 9790 | Rotor | 2934-53 |
| 20 | 2158 | VanePacket (set of 6 Vanes) | 2934-42-6 |
| 21 | 9707 | Cylinder | 2934-3 |
| 22 | 8730 | FrontEnd Plate | 2934-11 |
| 23 | 8560 | FrontRotor Bearing | 810-97 |
| 24 |
| CylinderDowel | 2934-98 |
| 25 |
| MotorHousing Asssembly | 1712-A40 |
| 26 |
| ReverseValve Bushing | 2934-330S |
| 27 | 8579 | AirPort Gasket (2) | R44H-210A |
| 28 | 8350 | AirPort Gasket Retainer (2) | 2940-200 |
| 29 | 8850 | ReverseLever | 2934-658A |
| 30 | 8561 | ReverseLock Plunger | 4U-663B |
| 31 | 8562 | ReverseLock Plunger Spring | 4U-664 |
| 32 | 9048 | ReverseValve Assembly | 2934-A329 |
| 33 | 8283 | ValveSeal | 85H-167 |
| 34 |
| HammerCase Assembly | 1712B-A727 |
| 35 | 9338 | HammerCase Bushing | 2934-641 |
| 35A |
| HammerCase Label | WARNING-2-99 |
| 36 | 8563 | HammerCase Gasket | 2934-36 |
| 37 |
| HammerCase Cap Screw (4) | 834-638 |
| 38 |
| HammerCase LockWasher (4) | 34U-58 |
| 39 |
| HandleCap Screw (4) | 510-638 |
| 40 |
| CapScrew Lock Washer (4) | 8U-58 |
| 41 | 8851 | HammerFrame Assembly | 2934-A703 |
| 42 |
| HammerPin (2) |
|
| 8852A | Hammer Pin (2) with Heads | 2934-704 |
| 8852B | Hammer Pin (2) without Heads | 2934-704 |
| 43 |
| Hammer | 1712-724 |
| 44 |
| SideSpade Handle | T15-41 |
| 45 |
| SideSpade Handle Stud | 534-448 |
| 46 |
| SideSpade Handle Stud Nut | 107-73A |
| 47 | 8885 | SideSpade Handle Bracket | 2934-364 |
| 47A |
| SideSpade Handle Bracket Spacer (2) | 2934-140 |
| 48 |
| 1"Square Drive Anvil |
|
|
| StandardLength | 1712-726 |
|
| 6"Extended Length | 280-726-6 |
| 49 |
| RetainerRing (for 1" Square Drive Anvil) | RR10015S |
| 50 |
| SplineDrive Anvil |
|
|
| StandardLength | 1712-A526 |
|
| 6"Extended Length | 280-A514-6 |
| 51 | 8141 | RetainingPlunger Spring | 2940-231 |
| 52 | 8143 | SocketRetaining Ball | D04-280 |
| 53 |
| RetainingBall Plunger | 845-230 |
| 54 | 8142 | PlungerRetaining Pin | 845-128 |
| 55 |
| ExhaustDeflector | 280-167 |
| 56 |
| ExhaustDeflector Screw (2) | W54-376 |
| 57 |
| DeadHandle | 834-48 |
| 58 |
| HorizontalHanger | 2934-366 |
| 59 |
| Nameplate | 280-301 |
| 60 |
| NameplateScrew (4) | C32-302 |
| 61 |
| Piped-AwayExhaust Kit |
|
|
| withMuffler | 2940-KM184 |
|
| withoutMuffler | 2940-K184 |
| 62 |
| ExhaustDeflector Kit | 2934-K23 |
| 63 | 8652 | ExhaustDeflector Assembly | 2934-23A |
| 64 |
| ExhaustBaffle | 2934-124 |
| 65 | 8656 | Gasket | 2934-223 |
| 66 | 8567 | Silencer | 2940P-311 |
| 67 |
| ExhaustDeflector Screw (2) | R43F-104 |
| * |
| Bottleof Oil | 405-M01 |
| * |
| Grease | 405-MG1 |
| * |
| LubeInjector | 230-228 |
| * | 9939 | Tune-upKit (includes illustrated parts 3, 9,10,12, 13, 15, 18, 20, 23, 27 (2), 28 (2), 31, 33 and 36) | 280-TK2 |
