| Index No. | Part No. | Description | No. Req'd |
| 1 | 6154001460 | Cylinder | 1 |
| 2 | 6154201430 | Front plate | 1 |
| 3 | 6154261180 | Rotor | 1 |
| 4 | 6156611030 | Washer | 1 |
| 5 | 2050547623 | Blade (set of 4) | 1 |
| 6 | 6154221590 | Rear plate CP3451-16 | 1 |
| 7 | 6154221600 | Rear plate CP3451-18 | 1 |
| 8 | 6157581380 | Bearing 608Z (8 x 22 x 7) | 1 |
| 9 | 6156731330 | Motor end cap | 1 |
| 10 | 6157510100 | Bearing 6200 (10 x 30 x 9) | 1 |
| 11 | 6156350370 | Pin spring | 4 |
| 12 | 6153212340 | Pressing cover | 1 |
| 13 | 6156582970 | O-Ring (11.8 x 1.8) | 1 |
| 14 | 6155011230 | Spindle (CP3451-18SEC series) | 1 |
| 15 | 6155652970 | Extension housint | 1 |
| 16 | 6156071560 | Front nut die grinder | 1 |
| 17 | 6155011240 | Spindle (CP3451-XXSE3, SER3, SE25) | 1 |
| 18 | 6157580970 | Bearing 61900ZZ (10 x 22 x 6) | 2 |
| 19 | 6156300280 | Key (CP3451-XXSE3, SER3, SE25) | 1 |
| 20 | 6155421330 | Adapter for cone wheel | 1 |
| 21 | 6155230250 | Collet holder | 1 |
| 22 | 6155260630 | Collet 1/4" | 1 |
| 23 | 6156071540 | Collet nut | 1 |
| 24 | 6156071550 | Front nut (grinder) | 1 |
| 25 | 6155031620 | Rear flange 3" | - |
| 26 | 6155031610 | Rear flange 2.5" | - |
| 27 | 6153071570 | Rear housing rotative throttle | - |
| 28 | 6153120950 | Valve stem | - |
| 29 | 6156700560 | Plug | - |
| 30 | 6156811440 | Switch spring | - |
| 31 | 6156582990 | O-Ring (12.5 x 1.8) | - |
| 32 | 6153071590 | Rotate switch | 1 |
| 33 | 6157440310 | Filter | 1 |
| 34 | 6156890390 | Ring snap RW35 | 1 |
| 35 | 6156583010 | O-Ring (30 x 1.8) | 1 |
| 36 | 6157301880 | Exhaust hose adaptor (rotative type) | 1 |
| 37 | 6153071550 | Rear body safety lever type | 1 |
| 38 | 6156721530 | Plug | 1 |
| 39 | 6153120940 | Valve stem | 1 |
| 40 | 6153212370 | Lever | 1 |
| 41 | 6156350380 | Pin spring (3 x 20) | 1 |
| 42 | 6156583030 | O-Ring (6 x 2.65) | 1 |
| 43 | 6156583000 | O-Ring (14 x 1.8) | 1 |
| 44 | 6156583040 | O-Ring (11.2 x 2.65) | 1 |
| 45 | 6156583020 | O-Ring (36 x 1.8) | 1 |
| 46 | 2050541503 | Grid | 1 |
| 47 | 6155041890 | Guard 2.5" | 1 |
| 48 | 6155041910 | Guard 3" | 1 |
| 49 | 6155020800 | Front flange 2.5" | 1 |
| 50 | 6156050950 | Nut Hex M10 | 1 |
| 51 | 6155020790 | Front flange 3" | 1 |
| 52 | 6155701000 | Rear sleeve | 1 |
| 53 | 6155700980 | Front sleeve | 1 |
| 55 | 2050543883 | Exhaust foam | 1 |
| 56 | 2050547503 | Noise reduction foam | 1 |
| 57 | 2050546543 | Air inlet (rotative lever type) | 1 |
| 80 | 6154320110 | Exhaust hose (not shown) | 1 |
| 81 | 2050496453 | Wrench (not shown) | 2 |
| 82 | 6158010810 | Stem | 1 |
| - | 6158727840 | Warning label die grinder | 1 |
| - | 6158727860 | Warning label grinder | 1 |
| - | 6153973030 | Tune-upKit (Incl 5, 8, 10, 13, 46) | |
| - | 6154340650 | BladesKit (50 pack) | |
