Long length. Curved and pointed. Use twisting or prying action. Length 31".

Short length. Curved and pointed. Use twisting or prying action. Length 18".

11566 Titan 6pc Panel Removal Set: This high quality nylon panel removal set is ready to help you out with the delicate task of removing those interior panels, dash panels and body molding without damage to the panel or the painted / finished surfaces. With their specifically designed slim profile this set is ready to help get those delicate stubborn panels and trim removed.

15040 Titan Door Spring Tool: This tool was designed for the quick and easy removal and installation of car door hinge springs, and can be used in conjunction with a 1/2 inch wrench.

15047 Titan 3 pc. Multi Wedge Pry Tool Set Specially designed slim profile Shaped for many different applications such as removing dashboards, air vents, door panels, door locks, electronic seat controls, seat levers, center consoles, gear shifter and more High quality nylon material prevents scratches to painted surfaces and delicate panel surfaces Includes 3 flexible wedge tools Professional. Includes 3 flexible wedge tools.

15048 Titan 6pc Multi Wedge Pry Tool Set: Titan multi-wedge pry tool sets are specially designed to gently remove door panels, dashboards, consoles, and more. These tools feature different wedge shapes that allow you to get under and lift pieces away without damaging delicate surfaces.

15050 Titan Heavy Duty Hand Riveter: If you are tired of chasing the left-over parts of the rivet that your riveter shoots across the garage / workshop, then this is the riveter for you. With it's heavy duty design, nose pieces and wrench store in handles, compound lever action and collection cup for spent rivet mandrels.

15052 Titan 10in Hand Riveter w/ Rivets: This riveter stores the noses / tips on one of the levers and the wrench for changing them in one of the handles. Comes complete with the riveter, four different size noses / tips and 60 rivets, 15 of each size.

15068 Titan 7pc Mini Hammer Precision Trim Tool Set.  Hammer with non-marring, flexible pry bar handle. Use for interior trim, upholstery, and light body repair. Blow mold case. Includes Hammer with non-marring, flexible prybar handle, (2) White rubber tips - For use on interior trim, machine work and light body repair. (2) Black non-marring tips - For use on interior panels, (1) Brass non-sparking tip - For use on soft metals/panels, (1) Steel tip - For use in dent removal.

15071 Titan Dent Puller Suction Cup

15073 Titan 3 Pack Spreader

15074 Titan Filler Scoop

15075 Titan 10in 3 Position File Holder. 3-position file holder. 10" flat blade. Planes, shapes, files and shaves. 10 in. Shaper File Blades come either 15088 rounded profile or 15072 flat profile.

15077 Titan Regular Dent Puller

15078 Titan Flexible Sander

15080 Titan Shrinking Hammer: For auto body dent repair and sheet metal shaping.

15081 Titan Pick Finishing Hammer: For auto body dent repair and sheet metal shaping.

15084 Titan 7pc Autobody Hammer Set: For auto body dent repair and sheet metal shaping.

15087 Titan General Purpose Dolly: For auto body dent repair and sheet metal shaping.

15088 Titan Body Filler Shaper File Blade 10 in. Shaper File Blades. For use with TITAN # 15075. For planing, shaping, filing or shaving. Rounded Profile.

15090 Titan Heavy Duty Suction Cup

OTC 1513B 4-Ton Stinger® Hydraulic Collision Repair Set - Industry standard couplers are interchangeable with leading manufacturer's units. Single-speed hydraulic hand pump and ram with 4" stroke. Snap together design of extension tubes allows for easy assembly.

OTC 1515B 10-Ton Stinger® Hydraulic Collision Repair Set - Industry standard couplers are interchangeable with leading manufacturer's units. Single-speed hydraulic hand pump and ram with 6" stroke
Snap together design of extension tubes allows for easy assembly.

Martin Sprocket & Gear 153FG Cross Chisel Hammer - Excellent for finishing. Cross peen used for working in sharp corners around moldings and for caulking.

Long-reach, thin point for low spot on low-crown panels.

Martin Sprocket & Gear 158FG General Purpose Pick Hammer - Medium size point and reach for general work. Low crown strawberry point for perfect balance.

Only Martin Hammers have the time tested good balance, and proper weight and clearances to speed and simplify repairs. Martin Hammers are forged from special alloy steel. Handles are of tough second growth Hickory and fiberglass shaft with cushion grips.

Pick Hammer

For work in close quarters.

Martin Sprocket & Gear 164G Utility Pick Hammer - Blunt point, short reach. For low spots in high-crown panels and other work with small clearance. Face: 1-9/16" round point, 5/32" radius. Length of pointed end, 2" head, 4" overall.

Door Jammer

Martin Sprocket & Gear 170FG Fiberglass Door Skin Hammer - For high crown work and finishing, without poking holes in thin sections.

Martin Sprocket & Gear 170G Door Skin Hammer - For high crown work and finishing, without poking holes in thin sections.

The Astro Pneumatic 1757 500 RPM Air Spot Drill features a 5.5" Deep Clamp Kit and 4 Drill Bits.  The drill has a 2 Speed Adjustable depth stop which allows you to drill out just the spot weld, and not the panel beneath.  It drills out the entire spot weld - no need for grinding!

Deluxe Windshield Air Knife Kit

Perfect for use in spot blasters and spark plug blasters.

19000 Titan 1.4mm HVLP Gravity Feed Spray Gun: This 1.4mm spray gun has a color coded body for easy, at-a-glance identification, 600cc paint cup, brass nozzle, locking air regulator with a gauge and a 1/4" air inlet.

19000-14 Titan 1.4mm Needle & Nozzle Set

1.7 mm Needle and Nozzle Set

2.0 mm Needle and Nozzle Set

2.3 mm Needle and Nozzle Set

19018 Titan 1.8mm HVLP Gravity Feed Spray Gun: This 1.8mm spray gun has a color coded body for easy, at-a-glance identification, 600cc paint cup, brass nozzle, locking air regulator with a gauge and a 1/4" air inlet.

19023 Titan 2.3mm HVLP Gravity Feed Spray Gun: This 2.3mm spray gun has a color coded body for easy, at-a-glance identification, 600cc paint cup, brass nozzle, locking air regulator with a gauge and a 1/4" air inlet.

19100 Titan 3pc Dual Setup HVLP Spray Gun Kit: This spray gun kit has two chrome plated bodies, (one 1.4mm needle set and nozzle and one 1.7mm needle and nozzle set) 1000 ml aluminum paint cups, a locking air regulator with a gauge and spray pattern control on the side of the guns.

1.4mm Needle & Nozzle for

2.0mm Needle

2.3 mm Needle and Nozzle Set

19110 Titan 1.0mm HVLP Gravity Feed Touch Up Gun: This touch up gun comes with 1.0mm touch up needle and nozzle set, 100 cc aluminum paint cup, cleaning kit with maintenance tools and it ships in a re-useable storage tray.

19112 Titan 11pc Spray Gun Cleaning Kit: This kit works on all types of paint spray guns and will help you prolong the life of your spray guns. Get yours today and help maximize you dollars for those paint spray guns.

19113 Titan 1.3mm Gravity Feed HVLP Spray Gun: This 1.3mm spray gun has a chrome plated body, 1000 ml aluminum paint cup, a locking air regulator with a gauge, spray control on the side of the gun and a 1/4" air inlet.

19114 Titan 1.4mm HVLP Gravity Feed Spray Gun: This 1.4mm spray gun has a chrome plated body, 1000 ml aluminum paint cup, a locking air regulator with a gauge, spray control on the side of the gun and a 1/4" air inlet.

19117 Titan 1.7mm HVLP Gravity Feed Spray Gun: This 1.7mm spray gun has a chrome plated body, 1000 ml aluminum paint cup, a locking air regulator with a gauge, spray control on the side of the gun and a 1/4" air inlet.

19120 Titan 2.0mm HVLP Gravity Feed Spray Gun: This 2.0mm spray gun has a chrome plated body, 1000 ml aluminum paint cup, a locking air regulator with a gauge, spray control on the side of the gun and a 1/4" air inlet.

19123 Titan 2.3mm HVLP Gravity Feed Spray Gun: This 2.3mm spray gun has a chrome plated body, 1000 ml aluminum paint cup, a locking air regulator with a gauge, spray control on the side of the gun and a 1/4" air inlet.

19220 Titan 4pc HVLP Triple Setup Spray Gun Kit: This kit come with three spray guns (one 1.0 mm, one 1.4mm and one 1.7mm), locking pressure regulator with a gauge, aluminum paint cups, 2-step triggers, adjustable spray control knob on side of guns, adjustable for spray width, air inlet and fluid outlet.

19221 Titan 4pc HVLP Triple Setup Spray Gun Kit: This four piece spray gun kit has three color coded bodies (one 1.0mm, one 1.3mm and one 1.7mm) for easy, at-a-glance identification, aluminum paint cups, adjustable nozzles, locking air regulator with a gauge and a 1/4" air inlets.

19223 Titan 4pc HVLP Dual Setup Spray Gun Kit: This spray gun kit comes with two spray guns (one 1.4mm and one 1.7mm), locking pressure regulator with a gauge, 6" random orbital sander for prep and finishing work, mesh fillers for gravity feed paint cups, spray gun wrenches and a cleaning brush.

19417 Titan Siphon Feed Detail Spray Gun

19418 Titan 1.8mm Siphon Feed Production Spray Gun: Fully adjustable spray pattern.1.8 mm needle and nozzle set for heavier materials. Non bleeder type, siphon feed. External mix for fine atomization. Spun aluminum 1 liter paint cup.

19420 Titan Spot Spray Rebuild Kit: This is the rebuild kit for Titan 19419 and 19421.

19551 Titan Dual Action Gravity Feed Airbrush: This airbrush is lightweight and balanced, with a 1.0 mm nozzle, chrome plated finish and dual action trigger (press down for air and pull back for paint). This item was designed to be used with automotive or water based paints.

19900 Titan 600ml Plastic Cup & Lid: This is a 600ml / 21 oz plastic paint cup and a vented screw on lid for Titan Vaper 19000 Series gravity feed spray guns.

19902 Titan 2pc Plastic Lid for 150ml Paint Cup: This  is a replacement lid for the VAPER 19100 & 19200 Series gravity feed touch-up spray guns with 150ml stainless steel paint cups. This is a snug fitting press on type vented lid.

19903 Titan 150ml Stainless Steel Paint Cup: This  is a replacement paint cup for the VAPER 19100 & 19200 Series gravity feed touch-up spray guns. This iincludes a snug fitting press on type vented lid.

19906 Titan 1000ml Aluminum Paint Cup & Lid: This  is a replacement paint cup for the VAPER 19100 & 19200 Series gravity feed production spray guns with 1000ml Aluminum paint cups. This includes a snug fitting press on type lid.

19907 Titan 1000ml Paint Cup Replacement Lid

19908 Titan Spray Gun Rebuild Kit for 19000 Series: This rebuild kit is for the Titan VAPER™ 19000 Series gravity feed production spray guns.

19909 Titan Spray Gun Rebuild Kit for 19100 Series: This rebuild kit is for the Titan VAPER™ 19100 and 19200 Series gravity feed production spray guns.

19910 Titan Spray Gun Rebuild Kit for Touch Up Gun: This rebuild kit is for the Titan VAPER™ 19100 and 19200 Series gravity feed touch-up spray guns.

19911 Titan 5pc In-Line Paint Filter

19951 Titan 17in x 2-3/4in Flexible Sanding Block: This sanding block has more of a plane look and handles. It has been constructed of tough polyurethane that is also soft and pliable and can be utilized on both flat and contoured surfaces.

19952 Titan 5in x 2-3/4in Flexible Sanding Block: This sanding block has been constructed of tough polyurethane that is also soft and pliable and can be utilized on both flat and contoured surfaces.

19990 Titan Air Spray Gun Holder: This paint spray gun stands is the perfect way to hold or store your gravity feed paint gun. The stand holds your paint strainer and spray gun upright so the paint can be poured it into the cup and not all over your workspace and / or floor.

19991 Titan Magnetic Spray Gun Holder: Simply attach this magnetic spray gun holder to your spray booth walls, work station, tool box or to any ferrous metal surface, and you have a convenient way to store your spray gun and with vinyl coated hooks you will not need to worry about scratching your spray gun.

Easily Separate Spot Welded or Bonded Panels!

Right Angle Seambuster

Fender Fixer

Window Molding Remover

Door Hinge Popper With Pin Puller

New Air Hammer driven door skinning tool that is easily affordable for every Autobody technician.

Skin Zipper Replacement Head

Steck 21910 Car and Light Truck Door Spring Tool - The safest tool available for coil springs in GM doors.

SPECIAL SCREW

Serrated Saddle - Serrated saddle for use with 10-ton hydraulic rams, Nos. 4103, 4104 and 4105.

Serrated Saddle

5/16" steel chain, 65-3/4" long, 4,000 lb. capacity. With swiveling safety hooks on both ends. Use with No. 1806.

Door Upholstery Remover

AES 355 Braided Piano Wire - Especially designed for urethanes. There are seven super strong stainless steel wires braided into one that creates a saw-type action for faster cutting. Contains 72' of wire in a special dispenser package.

AES 356 150' Piano Wire Roll (1/4 lb) - Flexible piano wire popularly used for cutting the sealant between glass and body openings on cars using the "gasket-less" type of windshield installations. 1/4LB Spool (Approximately 150 Feet)

Paint-N-Stick Side View Mirror Holder

Bumper Tree

Auto Writer Markers - Assorted Pen Size

U. S. Chemical & Plastics AUTOWRITER PENS BLUE 12/CS

U. S. Chemical & Plastics AUTOWRITER PENS PINK 12/CS

Auto Writer Markers - Yellow Pen Size

2 pc. Hog Ring Pliers Set

Hog Ring Pliers - Straight

Hog Ring Pliers - 45º

Panel Clip Pliers

75 pc. Heat Shrinkable Terminal Assortment

3 pc. Body Clip Set

OTC 4383 Hole Punch Kit - Pierce up to 14 gauge steel smooth and easily with this tool and 7 set punches and dies.

OTC 4448 Door Buzzer Shutoff Tool (2 piece) - This simple tool allows for work with the vehicle door open without the annoying door buzzer on. High tension spring can be placed in the door jamb to close the door buzzer switch typically found by the hinges.

OTC 4460 Electrical Connector Separator Tool (2 piece) - Releases locking tabs on electrical connectors, component connections and wiring harness connectors. Eliminates damage to the tab or connector. This pair of tools permits access to electrical connectors in any position.

OTC 4461 Terminal Release Tool Set - Saves time and money repair or rebuild a wiring harness without having to order the entire OE replacement. Insert the appropriate release tool to depress the locking tab and the individual wire slides right for service or replacement.

OTC 4485 Spot Weld Cutter Set - Use with an electric drill or air drill to cut 5/16" and 3/8" spot welds. Cutter bits have cutting teeth on each end.

SPOT WELD CUTTER REPLACEMENT BITS

OTC 4492 4-Piece E-Clip Tool Set - Dual operation tool: one end of tool releases e-clip; other end of tool installs e-clip. Tools fit e-clips from 6 mm to 9 mm. Each tool easily locks into handle provided.

The Astro Pneumatic 4505 5 pc. Fastener & Molding Remover Set Set includes 5 distinctive tools for easy removal of fasteners, molding, wheel hubs, etc. It's ideal for use on internal and external vehicle molding and trim fasteners. The plastic construction of these tools prevents scratching and damage to vehicle paint, leather, chrome, etc.

OTC 4549 Door Panel & Upholstery Tool Set - These heavy-duty door panel and upholstery tools are used to remove window clips, door handle clips, door panel clips and upholstery tucking.

OTC 4549-3 Large Panel Clip Tool - This heavy-duty door panel tool has a u-notch used to remove door panel clips.

The Astro Pneumatic 4550 Air Operated Paint Shaker features a patent pending orbital drive mechanism.  It's compact and lightweight, yet it's heavy duty construction provides a long operational life.  The fully adjustable locking clamps are rubber coated to ensure a secure grip while shaking.

OTC 464 2-Ton Puller - OTC Three-in-One "Griplock" Puller manufactured to OTC's rigorous specifications to ensure the quality professionals expect from OTC.

OTC 465 5-Ton Puller - OTC Three-in-One "Griplock" Puller Manufactured to OTC's rigorous specifications to ensure the quality professionals expect from OTC.

Lisle Windshield Locking Strip Tool

Antenna & Radio Service Kit

OTC 4712 European Radio Removal Tool Kit - Contains popular tools for the removal of radios from the dash of BMW, Volks Wagon, Audi and Mercedes-Benz vehicles.

OTC 4715 Deluxe European Radio Tool Set - 18-piece set of tools used to remove radios on most European vehicles sold in the U.S. and Europe.

OTC 4784 10" Profile Gauge - This 10" gauge provides an exact copy of a contour or profile needed during bodywork or fabrication. The plastic fingers will not scratch original finish.

Glass Cleaner

10 Ton Collision Repair Set - Exert hydraulic force just where it’s needed to lift, spread, bend, or straighten. Handles the high-force jobs you face daily in trailer maintenance or other applications. Includes reliable components including 10-ton, 10-1/8" stroke hydraulic ram; air/hydraulic pumping unit; hydraulic hose; four snap-together extension tubes; extension tube coupling; serrated saddle; flat base; 90° wedge head; flex head; storage case. All set components are covered by OTC Lifetime Marathon Warranty®.

Automotive Glass Cleaner, 19 oz.

Blair 51000 TORNADO II™ Portable Electric Paint Shaker - This item is indispensable to body shop work or wherever painting or mixing liquid is needed. Its three levels of motion thoroughly blend gallon size and smaller paints, including aerosol containers, in minutes.

Bolt Inductor Accessory For Magnetic Induction Heater

Keysco Tools 55116 Rubber Heel Dolly - Weighted hard rubber to match the weight of the hammer (Absorbs shock). Works well on newer thinner sheet metal.

Astro Pneumatic's 557005 Workstand with Sling is lightweight but, but has a 500 lb. load capacity. It's ideal for holding tools and parts during assembly or repair. The stand is constructed of Steel tubing with 1/2” foam rubber padded tops, and folds to small footprint for storage.

63000 Titan 3lb Sledge Hammer

63004 Titan 3lb Cross Pein Hammer

63008 Titan 8oz Dead Blow Hammer

63020 Titan 16oz Claw Hammer

63024 Titan 32oz Ball Pein Hammer

63032 Titan 32oz Dead Blow Hammer

63040 Titan 3lb Brass Non-Sparking Hammer

Mo-Clamp 6311 Ford “T” Hook™ with Chain - Original shipping tie down for Ford vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled. 5/16" (7.94mm) Chain (anodized)

63116 Titan 16oz Dead Blow Hammer

63124 Titan 24oz Dead Blow Hammer

63125 Titan 5pc General Hammer Set - This set includes 2 ball pein hammers, a rubber mallet, sledge hammer and a cross pein hammer.

Mo-Clamp 6313 Ford “T” Hook™ with Grab Hook - Original shipping tie down for Ford vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled. 5/16" (7.94mm) Chain (anodized)

63144 Titan 5pc General Hammer Set

Mo-Clamp 6317 "J" Hook™ with Chain - Original shipping tie down for ALL vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled. 5/16" (7.94mm) Chain (anodized)

Mo-Clamp 6318 "J" Hook™ with Grab Hook - Original shipping tie down for ALL vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled. 5/16" (7.94mm) Chain (anodized)

63216 Titan 2lb Brass Non-Sparking Hammer

63217 Titan 16oz Rubber Mallet

63232 Titan 32oz Rubber Mallet

63233 Titan 2.5lb Stoning Hammer

63308 Titan 8oz Ball Peen Hammer

63312 Titan 12oz Ball Pein Hammer

63316 Titan 16oz Ball Pein Hammer

Window Holder

Makes Wiper Arm Removal & Replacement an Easy Job. Easily removes wiper arms without damage to car finish.

Door Adjuster

OTC 6676  Heavy-Duty Wiper Arm Puller - Designed to remove the aluminum arm from the steel stud, which very often will galvanize and fuses the arm and stud together.

OTC 6711 Mercedes-Benz Instrument Panel Tool Kit (8 piece) - This tool kit covers virtually all Mercedes-Benz model from 1992 to the present.

OTC 6785 Euro Door Handle Tool Kit - This kit contains the tools needed to service most door hinges and door handles on Audi, Mercedes-Benz, Porsche, and Volkswagen vehicles.

Mo-Clamp 7000 Universal Tram Gauge with Storage Case - Tram Instruments are a versatile and indispensable tool for determining collision damage to unibody cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components.

Handy Spray /New Heavy Duty Unit

Mo-Clamp 7050 Baby Tram with Case™ - Tram Instruments are a versatile and indispensable tool for determining collision damage to unibody cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components.

Astro Pneumatic's 7300 Super Stand Comes with 8 adjustable bars to fit almost any panel securely. Its portability allows for fast and easy moving of the part from the prep station to the spray booth.  The unique design allows for single handled rotation of panels 350° in 16° increments.

AES 760 Windshield Knife - Use to remove windshields on Chrysler & GM vehicles. Cuts the butyl adhesive caulking compound around windows with a special tempered steel blade.

AES 761 Windshield Knife Replacement Blades (6 pack) - Replacement Cold Knife Bade fits (#760), 1".Includes 6 pc

Windshield Cutoff Wire

This kit contains the basic tools and wire needed for removing even the most modern windsheilds.

Use to remove and install the door hinge springs found on late model General Motors vehicles.

Jiggler GM

18" Urethane Cut-Out Knife

24" Urethane Cut-Out Knife

Use to remove windshields, backlights and bonded backlights on General Motors and Chrysler vehicles.

Rep Blade For 87900

OTC 898A Body And Fender Dent Puller -  Often, the biggest time-consuming part of dent removal is the removal and installation of interior panels and upholstery. This tool eliminates those steps. Simply drill a hole at the base of the dent and thread in the tool's self-tapping screw. A few sharp blows of the slide hammer will pull the dent out.

The Eliminator removes undercoated quickly and cleanly. The coarse wire brushes do not clog up like grinding discs. The fine brush is great for removing paint from tight areas. The medium brush is used for cleaning rust. The large geared eraser is removes large decals without burning the paint and is perfect for the cleaning off the adhesive from moulding strips.

The Eliminator removes undercoated quickly and cleanly. The coarse wire brushes do not clog up like grinding discs. The fine brush is great for removing paint from tight areas. The medium brush is used for cleaning rust. The large geared eraser is removes large decals without burning the paint and is perfect for the cleaning off the adhesive from moulding strips. (Tool Only)

Compact design lets this tool work best in tight areas, like wheel wells.

Pneumatic Door SKinning Tool

Precision machined aluminum body components, hardened shafts, and ball bearing construction throughout, for long life and maximum durability to provide many years of trouble free service for real world professional use.

M0333 Assenmacher Specialty Tools Mercedes Instrument Cluster Puller: he AST# M 0333 is used for the R and R of the instrument cluster on Mercedes models.

MW34 Assenmacher Specialty Tools Soft Orange Wedge Set: Constructed of soft orange polyethylene, this kit of three wedge-style dash panel removal tools allows installers to remove dash trim bezels and other vehicle interior moldings including door panels, without causing damage.

MW35 Assenmacher Specialty Tools Hard Black Wedge Set: Constructed of strong black polycarbonate, this kit of three wedge-style dash panel removal tools allows installers to remove oil pans, rocker covers and more, without causing damage. Made in U.S.A.

T10389 Assenmacher Specialty Tools VW Tiguan Door Lock Tool - Used for removal & installation of the lock cylinder housing on doors w/ no lock cylinder. Applicable: [2009–newer] Volkswagen® Tiguan.

Astro Pneumatic WINDK-08B 36mm Hook Blade for WINDK

Astro Pneumatic WINDK-08F 90mm Bent Blade for WINDK

Astro Pneumatic WINDK-08H 52mm Bent Curved Blade for WINDK

Astro Pneumatic WINDK-08J 18mm Flat-Nosed Straight Blade for WINDK