SHSM2PC Hilmor 1 1/2" Shaft 2Pc Mag Nut Driver Set 1839057: Hilmor has taken the nut driver up a notch. From a magnetic tip to securely hold the fastener in place to a deep shaft designed to accommodate long bolts.

HSM2PC Hilmor 3" Shaft 2Pc Mag Nut Driver Set 1839066: Hilmor has taken the nut driver up a notch. From a magnetic tip to securely hold the fastener in place to a deep shaft designed to accommodate long bolts.

XLHSM14 Hilmor 18" Shaft 1/4" Mag Nut Driver 1839076: Bring out the big guns with the 18” Shaft Magnetic Nut Driver. It’s there when you need an extra-long shaft to handle those tough-to-reach spots. Hilmor has taken the nut driver up a notch.

These Klein 2102S Aviation Snips with Straight Offset blades and an overall length of 9-1/2" keep user's hand above material being cut and flow material away from the blades. The 1-1/2" forged and heat treated steel blades provide strength and durability, and cut up to 18 gauge cold-rolled sheet metal and 22 gauge stainless steel sheet metal.

The Klein 3100 has a 6" angled, hollow-ground cutting edge for cutting full 3-1/2" (89 mm) straight cuts and wide curves. The blades are easily replaceable and made of high carbon steel, providing a cutting capacity of 22 gauge cold-rolled sheet metal; 26 gauge stainless steel sheet metal.

Easily replaceable cutting blades made of high-carbon steel. Cutting capacity: 22 gauge cold-rolled sheet metal; 27 gauge stainless steel sheet metal.

High Pressure Switch Assembly: This unit is to be installed  on a system without a high pressure shut off switch to prevent damage from high head pressure and to comply with EPA regulations. Contacts open at 410 pai and close at 150 psi.

GM Red Compressor Pressure switch: This is the GM red compressor pressure switch.

GM Compressor Low Pressure Cut off Switch for High Side: This is the GM compressor low pressure cut-off switch for the high side.

Ford High Pressure Cut Off Switch: This is the R134a Ford high pressure cut-off switch.

Ford Binary Switch: This is the R134a Ford binary switch 1994 to 2003.

Klein Tools 44101 Utility Knife Blades (5-Pak) - The 5-Pak, Utility knife blades are heavy-duty razor-edged blades.  Universally sized to fit Klein and most other makes of utility knives.  The blades are reversible, increasing the cutting surface life of each blade.  These Klein Tools blades are made in the U.S.A.

590160 UView Mist™ II Ultrasonic Cleaning Unit - MiST™ II is the Solution for Today's Automotive Service Operation. MiST™ II kills mold on contact and prevents new mold growth throughout the vehicles HVAC system and passenger cabin surfaces. MiST™ is an award winning technology aimed at the health of the driver and occupants, not the vehicle.

Klein screwdrivers give professionals extra-quality features that have made the Klein name famous for hand tools–features that assure greater convenience, comfort and efficiency in use, plus exceptional strength and durability.

Hollow Shaft Nut Driver Set feature full hollow shaft for long bolts or studs, with magnetic tip. Stubby nut drivers allow for work in close quarters. Internal flanges provide solid, twist-resistant shaft anchor. Meets or exceeds applicable ASME / ANSI specifications.

1/4" Drive x 3" Long Hollow Shaft Nut Driver features full hollow shaft for long bolts or studs, with magnetic tip for easy retrieval of nuts. Internal flanges provide solid, twist-resistant shaft anchor. Meets or exceeds applicable ASME / ANSI spec.

Use the Klein 6-inch Jab Saw to cut drywall, wallboard, plywood, and plastic.  Cuts in both directions (push and pull) with triple ground teeth for a fast cut.  Score and plunge cut with the hardened, beveled blade point.  A carbon steel blade, comfort-cushion grips with a thumb groove, and flat-end grip for palming or punching through drywall make the 725 Klein Jab Saw the professional's choice.

The 85484 4-piece Mini Cushion-Grip Assortment includes the following screwdrivers:  No. 0 Phillips tip, a 1/16" (1.6mm) keystone tip, a 3/32" (2.4 mm) cabinet tip, and a 1/8" (3.2 mm) cabinet tip.  Precision-machined tips provide an exact fit to reduce slippage, and the shafts are chrome-plated shafts for corrosion resistance.  The set comes in the convenient new P-O-P packaging, making it easy to display and cross-merchandise.

The ABM-100 Airflow Balancing Meter is an anemometer that fits in your pocket. It’s our first of a series of tools that connect to smart devices and are specifically designed for the HVAC industry. The ABM-100 easily and instantly converts air speed into air volume for you. Then it records the data to a history log, which can be emailed for professional looking reports.

The ABM-200 Airflow & Environmental Meter has all of the features of  the extremely popular ABM-100 plus it is wireless and also has temperature, humidity, and pressure sensors. These additional sensors give the meter the ability to accurately measure and record: Temperature Differential, Dry Bulb Temperature, Wet Bulb Temperature, Heat Index, Relative Humidity, Dew Point, Barometric Pressure, Air Density, Indoor vs. Outdoor Conditions, Wind Speed/Direction/Gusts. The wireless ABM-200 can be attached to our EXP-64 64” aluminum extension pole (sold separately) to take readings without having to go up a ladder.

CBM516 Hilmor Compact Tube Bender Mandrel 5/16" 1839036

Made of custom US-made steel, these  8-5/16" Long-Nose Pliers with Side Cutters are have hardened cutting knives and a heavier design for greater cutting power and longer life.  Extended handles give added reach and more leverage while  the slim head design allows working in confined areas.  The hot-riveted joint ensures smooth action and prevents handle wobble.

Klein 9-1/4" Hi-Leverage Side-Cutting Pliers provide 46% greater cutting and gripping power than other plier designs.  Features a streamlined, cross-hatched knurled jaw design.  Unique handle tempering helps absorb the "snap" when cutting wire, and "handform" handles make them easy to grip.  Made of custom US-made steel.

Klein Pliers are made up of finest U S Steel alloy. They are forged precision machined hardened and carefully tempered for maximum strength. Klein Pliers provide exceptional performance and durability. High-leverage design.

Klein Tools specializes in making the finest pliers in the world.  These 10" Pump Pliers feature a tongue and groove design for a non-slip grip - even when applying heavy pressure.  A wide range of jaw positions are available to meet the demands of the professional.  Handles are plastic dipped for comfort.

The DSR100 Schumacher 12 Volt 460 Amp 2000 Peak Amp Pro Booster features Sealed Lead Acid Battery power with 460 Crank Assist and 320 Cold cranking amps of power. Designed for 12 volt vehicles. Built with durable Roto-Mold casing, the strongest resin in the industry. Professional 52" #4 AWG jumper cables with a built-in, one-way diode. Heavy-duty clamps for long life. The DSR100 also features a built-in voltmeter for testing the vehicle voltage as well as battery voltage with a push of a button.

The DSR101 Schumacher 12 Volt 560 Amp 3200 Peak Amp Pro Booster features Sealed Lead Acid Battery power with 560 Crank Assist and 345 Cold cranking amps of power. Designed for 12 volt vehicles. Built with durable Roto-Mold casing, the strongest resin in the industry. Professional 61" #2 AWG jumper cables with a built-in, one-way diode. Heavy-duty clamps for long life. The DSR101 also features a built-in voltmeter for testing the vehicle voltage as well as battery voltage with a push of a button.

DSR108 Schumacher 12 Volt 450 Amp Ultra Capacitor Battery-less Jump Starter. Jump starting made easy, no battery inside to maintain or replace. 100% maintenance-free, Features a Microprocessor controlled capacitor jumping system that eliminates the hassle of sealed lead acid or flooded internal battery failures. Jump starting power at 450 amps with a recharge time from battery: 90 seconds, recharge time from 12V socket: 200 seconds, recharge time from USB: 20-40 minutes. Recharges from a low, weak or discharged battery in minutes, the DSR109 also has an override mode for completely dead battery jump starting.

The DSR116 Schumacher 12 Volt Jump Starter 2250 Peak Amp DC Power Source packs a big punch with 22 Ah Battery's without putting a punch in your wallet, this unit features a full 2200 peak amps of power and 525 cranking amps 350 CCA to start the most stubborn cars. 4 gauge heavy duty cables transfer power completely and 60 inch cables ensure reaching even newer vehicles battery terminals. A built-in 400 WATT (3.5 Amp) 115 volt power inverter supplies ample switchable 115 volt power for work lights or accessories and doubles as a power source for recharging your other 115 volt accessories like a cell phone or laptop (great for conventions).

DSR121 Schumacher 10/50/250A Wheeled Battery Charger Starter 6/12 Volt. Schumacher's DSR121 10/50/250A 6/12V Wheel Battery Charger and Starter has a 250A engine start that is powerful enough for SUVs, trucks and large engines. The 25A/50A Boost mode-ramps up the voltage and sends a quick burst of energy into the battery to quickly bring deeply discharged batteries back to life. Fully automatic microprocessor control prevents overcharging and damage to both the battery and unit. The 4A mode monitors levels and switches to maintenance mode when fully charged. Digital display with LED indicators and touch pad allows for easy use and user controlled start/stop interface.

DSR123 Schumacher 15/30/70/300A Wheeled Battery Charger Starter 12/24 Volt. Schumacher 12/24V DSR® ProSeries™ Wheeled Battery Starter/Charger with Boost Mode not only charges your battery, but also provides dependable power to jumpstart SUVs, trucks and other large engines with standard, deep cycle, AGM and Gel cell batteries. 10–50 Amp boost mode for deeply discharged batteries.

The J2000-9NE Journeyman Hi-Leverage Side-Cutting Pliers provide a 46% greater cutting and gripping power than other plier designs.  Cuts ACSR, screws, nails and most hardened wire. Features dual material handles, sure-gripping, cross-hatched knurled jaws, induction hardened cutting knives, and a hot-riveted joint to ensure a long life, smooth action, and no handle wobble.

Klein Journeyman Heavy-Duty Side Cutter Long-Nose Pliers have a skinning hole to cleanly strip 12 AWG wire.   Knives are induction-hardened for long lasting cuts.  Heavier design and extended handles provide added reach, leverage, and greater cutting power.  The hot-riveted joint ensures no handle wobble.  Dual-material handles for a more comfortable grip and added durability.

The Klein 7-Piece Nut Driver Set contains a set of 7 hollow-shaft nut drivers in the most popular hex sizes: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16". and 1/2".  Comfordome handles fit comfortably in the hand, and are color coded for easy identification.   The chrome plated shaft resists corrosion.  Packaged in a convenient vinyl pouch which can be hung up or rolled.

BlackMax® Black & Chrome series 4 valve anodized aluminum block body with three ¼" SAE and one ⅜" SAE vacuum port, Vortech® Deep Vacuum Valves, 3 premium 5ft Pro-Set® Black & Chrome hoses with ¼" SAE 45° Ball Valves on ends, an extra large sight glass for monitoring flow, 3 ⅛" (80mm), Class 1.0 R-134a, 22, 404A, 410A with internal silicon dampening cup for Flutter-Free operation, protective gauge boots, and hanging hook.

6.25 CFM Dual voltage design vacuum pump w/gas ballast valve.  Operates on 115 VAC or 230 VAC (50 or 60Hz). Advanced two-stage design pulls deep vacuum fast to 15 microns.