|
|
|
|
|
|
17800B Robinair Multiple Refrigerant Recovery Recycling Unit (Refurbished)
|
|
|
The 17800B is ideal for refrigerated trailers, buses, RVs, and other vehicles that use more than one refrigerant and have system charges greater than 6 pounds. The 17800B Recovers,
Recycles, Evacuates, and Recharges R-12, R-134a, R-22, R-502, MP and HP
Blends — and many more! — all in one fast, continuous operation through
one hook-up. It’s ideal for refrigerated trailers, buses, RVs, and other
vehicles that use more than one refrigerant. The CoolTech Multi is also
great for fleet maintenance, covering a variety of makes and models
since it has both R-12 and R-134a capabilities. In-plant maintenance
departments will find it can handle the different types of refrigerants
used in various systems.
|
|
|
|
|
|
|
|
|
|
25175A Robinair Multi Refrigerant Oilless Recovery Unit (Remanufactured)
|
|
|
25175A Robinair Multi Refrigerant Oilless Recovery Unit (Remanufactured). Designed for recovery of medium and high-pressure refrigerants, provides continuous recovery without the need to change the hose or flip a switch. Automatic high pressure cut-out switch for safety. Direct liquid recovery without damaging the compressor and an Oil-less compressor which allows for rapid transfer of large amounts of liquid.
|
Published Recovery Rates
|
|
Direct Liquid - 1.5 lb/min
|
Direct Vapor - 0.33 lb/min
|
Push/Pull - - lb/min
|
|
|
|
|
|
|
|
|
|
|
6015B ATEC 6/12 Volt 40/10/200 Amp Manual Battery Charger With Start (Remanufactured)
|
|
|
 The 6015B ATEC 6/12 Volt Manual Battery Charger has power usually found on much higher priced Automotive wheeled battery chargers. Solid state circuitry ensures full charge for 6 & 12 volt conventional flooded batteries. Digital display shows both voltage and amperage. Powerful 200 amp engine start with 300 amp peak helps start stubborn trucks and cars. Charges 6 & 12 volt maintenance free batteries used in cars, trucks, farm equipment, RV and commercial applications. Charges discharged automotive batteries in 2 hours. 10 amp setting is ideal for charging smaller 12 volt batteries. 40 amp setting for fast charging. Large clamps deliver solid connections.
|
|
|
|
|
|
|
|
|
|
6035A Associated 6/12 Volt 500 Amp Carbon Pile Battery Load Tester (Remanufactured)
|
|
|
6035A Associated 6/12 Volt 500 Amp Carbon Pile Battery Load Tester (Remanufactured) provides complete testing for 6 and 12 volt systems in a small package. Simple tests include a State of charge test, Battery load test, Starter test and Charging System test. Easy to read digital voltmeter and analog ammeter combine with the versatility of a carbon pile load to give quick and precise determination of battery and charging system problems. Spring loaded load knob shuts off automatically. This 0 to 500 Amp DC tester has unique discs to prevent hot spots. Heavy duty clamps with “Flexi- Spring” cable guards provide added value. MADE IN USA.
|
|
|
|
|
|
|
|
|
|
6036B Associated Carbon Pile Load Tester 6/12v 1000 Amp (Remanufactured)
|
List Price: $1,277.91 Price $569.95
|
|
|
Ideal for battery distributors, high volume testing, and fleet use. High resolution carbon pile assembly, featuring unique curved carbon discs, ensures maximum contact, reduces hot spots, prevents edge burning and provides smoother operation and longer life.
|
|
|
|
|
|
|
|
|
|
6036B-24 Associated 6/12/24 Volt 1000 Amp Carbon Pile Battery Load Tester (Remanufactured)
|
List Price: $1,427.53 Price $599.95
|
|
|
6036B-24 Associated 6/12/24 Volt 1000 Amp Carbon Pile Battery Load Tester has all the features as the Model 6036B with the added value of 24 volt battery testing capability. Using a Dual Scale meter and solid state automatic ranging circuit, the tester automatically switches to the proper scale. Tests 6, 12, and 24 volt batteries.
|
|
|
|
|
|
|
|
|
|
6039 Associated 6/12 Volt 600 Amp Digital Carbon Pile Battery Load Tester (Remanufactured)
|
|
|
The Associated 6039 provides complete testing for 6 and 12 volt systems in a small package. Simple tests include a State of charge test, Battery load test, Starter test and Charging System test. Easy to read digital voltmeter and ammeter combine with the versatility of a carbon pile load to give quick and precise determination of battery and charging system problems. Spring loaded load knob shuts off automatically. This 0 to 600 Amp 0-19.99 volts DC tester has unique curved discs to prevent hot spots. Heavy duty clamps with “Flexi- Spring” cable guards provide added value. (Remanufactured) MADE IN USA.
|
|
|
|
|
|
|
|
|
|
6127 Associated Wheel Kwik Start 12v 10amp Automatic Charging (Remanufactured)
|
List Price: $488.41 Price $119.95
|
|
|
Kwik Start vehicles anywhere without AC power. On-board starter battery gives more cranking power than any fast charger, up to 850 amps cold cranking power. Will accommodate a user supplied group 24 battery (L 10.3" X W 6.8" X H 8.9"). Smart choice for car dealers, airports, industrial plants and shopping centers to assist customers and employees where there is no electrical power.
|
|
|
|
|
|
|
|
|
|
92399 Groits Automotive 6/12V 10/60A Automatic Variable Rate Battery Charger (New Old Stock)
|
|
|
92399 Groits Automotive INTELLAMATIC™ battery charger is designed to charge 6/12 volt lead-acid batteries of conventional, maintenance-free, or deep cycle construction. This charger will charge both large and small batteries, such as motorcycle and garden tractor batteries. The battery charger will automatically adjust the charging current appropriate to the type of battery. Only needs 2 volts to start charging a battery.
|
|
|
|
|
|
|
|
|
|
9250 Associated Automatic 12 Volt 6 Amp Intellimatic Automotive Battery Charger (New Old Stock)
|
|
|
9250 Associated Automatic 12 Volt 6 Amp Intellimatic Automotive Battery Charger (New Old Stock). Charges 12 volt batteries, deep cycle marine and automotive batteries, provides reverse connection protection. Built tough, for durability in rugged work environments. Features automatic 12-volt settings to shut output OFF at full charge, but resumes charging if the battery discharges for any reason. Charges 12 volt maintenance free and deep cycle batteries used in cars, trucks, farm equipment, RV and applications. Charges automotive batteries in 4 to 8 hours. Ideal for charging 12 volt motorcycle and lawn mower batteries. Reverse connection warning light and charge complete indicator. Large clamps deliver solid connections.
|
|
|
|
|
|
|
|
|
|
9252 Associated Automatic 6/12 Volt 10/2 Amp Automotive Battery Charger (New Old Stock)
|
|
|
9252 Associated Automatic 6/12 Volt 2/10 Amp Automotive Battery Charger (New Old Stock). Charges 6 & 12 volt batteries, deep cycle marine and automotive batteries. Built tough, for durability in rugged work environments. Features automatic 6 and 12-volt settings to shut output OFF at full charge, but resumes charging if the battery discharges for any reason. Ammeter displays amperage charge rate for accurate charging. Charges maintenance free and deep cycle batteries used in cars, trucks, farm equipment, RV and applications. 2 rates of charge for every battery 2 amp for small batteries and 10 amp for larger batteries. Charges automotive batteries in 3 to 6 hours. Ideal for charging motorcycle and lawn mower batteries. Large copper clamps deliver solid connections.
|
|
|
|
|
|
|
|
|
|
BC91252 ATEC Automatic 6/12 Volt 10/2 Amp Automotive Battery Charger (New Old Stock)
|
|
|
BC91252 ATEC Automatic 6/12 Volt 10/2 Amp Automotive Battery Charger (New Old Stock). Charges 6 & 12 volt batteries, deep cycle marine and automotive batteries. Built tough, for durability in rugged work environments. Features automatic 6 and 12-volt settings to shut output OFF at full charge, but resumes charging if the battery discharges for any reason. Ammeter displays amperage charge rate for accurate charging. Charges maintenance free and deep cycle batteries used in cars, trucks, farm equipment, RV and applications. 2 rates of charge for every battery 2 amp for small batteries and 10 amp for larger batteries. Charges automotive batteries in 3 to 6 hours. Ideal for charging motorcycle and lawn mower batteries. Large copper clamps deliver solid connections.
|
|
|
|
|
|
|
|
|
|
EEAC324B Snap-On R-134a Recovery Recycling Recharging Unit (Refurbished)
|
|
|
EEAC324B Snap-On Automated A/C Service (Refurbished) Combines simple operation with superior accuracy. The EEAC324B Snap-On recovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately. Semi-automatic operation means less attention is needed! Features include, Automatic Recovery, automatic air purge, automatic oil drain, refrigerant charging, new display, vacuum function, refrigerant management system. (Refurbished)
|
|
|
|
|
|
|
|
|
|
PDQ Christie 12 Volt Battery Charger 80 Amp Heavy Duty Automatic Service Express Charger (Remanufactured)
|
|
|
 The PDQ Christie 12 Volt Battery Charger 80 Amp Service Express Super Fast Charger is all about speed. Its fast-charge technology allows you to minimize charge time, maximize customer service and eliminate unnecessary battery warranties. The PDQ's electronics monitor the battery to ensure proper charging parameters and detect battery failure conditions that might prevent safe charging. Operation is automatic - simply connect to the battery and press the power switch. When finished, the PDQ will sound a horn and light an LED to show that the charging process is complete. With the PDQ, you can avoid the "Good but Discharged" contradiction.
|
|
|
|
|
|
|
|
|
|
T3 Christie 6/12 Volt Service Duty Battery Load Tester (Remanufactured)
|
|
|
The Christie T3 battery tester uses a 250 amp heavy fixed load to simulate actual vehicle cranking loads for accurate, reliable battery testing. To determine battery condition, operator does not have to interpret test result numbers. A large 6 in. display gives test result in simple pass/fail zones. Tests 6 and 12 Volt batteries, Enables assessment of battery state of charge, battery capacity and charging system output, Easy-to-read, color-coded display. Industrial grade construction. Acid-proof cabinet with vinyl coated clamps for durability.
|
|
|
|
|
|
|
|
|
|
YA1210 Snap-On 10/2 Amp 12 Volt Automotive Battery Charger / Reconditioner With Intellamatic III (Remanufactured)
|
|
|
YA1210 Snap-On 10/2 Amp 12 Volt Automotive Battery Charger / Re-conditioner 10 amp Automatic Automotive Battery Charger! Connect the terminals to your small or large battery and let it do the work. This charging system can perform the function of a battery charger, trickle charger, and a battery tender (can be left connected to battery to maintain charge). "DEEP DISCHARGE RECOVERY" and best of all it's Made in America. Whether you are dealing with a motorcycle or a large truck battery, the YA1210 won't overcharge, because of its automatic float system. Three LED lights on front panel will tell you the state of charge. This portable and versatile charger will charge all 12 volt batteries.
|
|
|
|
