|
|
|
|
|
6637 OTC Tools Strut Tamer II Extreme
|
|
|
OTC 6591 Strut Tamer Extreme - OTC’s StrutTamer HD for strut springs. This is simply the most effective compressor for handling virtually any straight, conical, or offset spring. With its adjustable arms and four-point locking jaws, the StrutTamer HD securely holds the spring in place.
|
|
|
|
|
|
|
|
|
|
34888HD Robinair Heavy Duty 134A Recovery Recycling Unit
|
|
|
The Robinair 34888HD heavy duty machine recovers, recycles, evacuates, leak-tests and recharges R-134a with 98.5% efficiency in both small and large mobile air conditioning systems. The new design features include a Large capacity, 50lb. removable tank and liquid pump for larger A/C systems, typically found in buses. A Nitrogen port to dry and leak test A/C systems. Fully automatic recovery, system evacuation, leak testing, refrigerant charge and oil drain/inject. Optional printer for capturing and retaining vehicle service data.
|
|
|
|
|
|
|
|
|
|
17800C Robinair Multiple Refrigerant Recovery Recycling Unit
|
|
|
The 17800C is ideal for refrigerated trailers, buses, RVs, and other vehicles that use more than one refrigerant and have system charges greater than 6 pounds. The 17800B Recovers, Recycles, Evacuates, and Recharges R-12, R-134a, R-22, R-502, R-404, MP and HP Blends and many more! all in one fast, continuous operation through one hook-up.
|
|
|
|
|
|
|
|
|
|
LD7 Robinair Dual Mode Refrigerant Leak Detector R-410a R-134a 1234yf
|
|
|
The Robinair LD7 Premium Refrigerant Leak Detector features a new color graphic display that highlights leak sizes in two unique ways. Bar graph mode shows the amount of refrigerant detected in the air and changes colors as the sensor gets closer to the leak. Sweep mode allows the user to see the level of refrigerant detected in the air through a line graph that helps the user trace back and forth to pinpoint the exact source of the leak. The LD7 also uses an audible alarm to alert technicians of a refrigerant leak, UV LED lights to locate leaks using UV dye and an inspection light for searching in dark locations. The LD7 is compatible with most commonly used refrigerants today, including R-134a and 1234yf, and is equipped with a stable, long life sensor that will last up to 10 years. The LD7 meets all of the current industry leak detector standards and is covered by a 2-year warranty. Uses 4 AA batteries, included.
|
|
|
|
|
|
|
|
|
|
LD5 Robinair Select Refrigerant Leak Detector R-410a R-134a 1234yf
|
|
|
The LD5 features a long life solid electrolyte semiconductor sensor technology that is designed to detect all CFC, HCFC, HFC, and HFO refrigerants including R-1234YF (HFO), R-134A (HFC), R-410A (HFC), R-22 (HCFC), R-407C (HFC), R-507 (HFC), R-12 (CFC), R-404C (HFC). The LD5 is designed to detect all SNAP approved refrigerant blends. The LD5’s unique graphic color LCD display and sweep mode function conveys messages, graphics and prompts giving the A/C technician real-time information to help locate the source of the leak and ensure the leak detector is always at optimal performance. The LED inspection light aids the technician to locate and inspect all A/C suspect fittings and components while searching. The LD5 does not require rechargeable batteries
|
|
|
|
|
|
|
|
|
|
FST3000 Vanair Super Capacitor 12 Volt 3000 Amp Capacity Jumpstarter
|
|
|
12 Volt Start/Charge - 19 HP EFI Kohler® Gas Plus 24 CFM Air with 30’ 3/0 Arctic Grade Start Cable with 12V Fuel Pump. (no air tank, fuel tank or battery included). FST3000 Vanair Super Capacitor 12 Volt 3000 Amp Capacity Jumpstarter. The Vanair FST3000 featuring the Vanair Super Capacitor (VSC™) provides instantaneous engine starting power to get vehicles back up and running...FAST! No more waiting for batteries to charge — getting the vehicles back to work in mere seconds! FST3000 is the fastest vehicle starting system on the market and can start all vehicles without downtime.
|
|
|
|
|
|
|
|
|
|
FST3000™+Air Vanair Super Capacitor 12 Volt 3000 Amp Capacity Jumpstarter
|
|
|
12V Start/Charge - 19 HP EFI Kohler® Gas Plus 24 CFM Air with 30’ 3/0 Arctic Grade Start Cable with 12V Fuel Pump. (no air tank, fuel tank or battery included). FST3000 Vanair Super Capacitor 12 Volt 3000 Amp Capacity Jumpstarter. The Vanair FST3000 featuring the Vanair Super Capacitor (VSC™) provides instantaneous engine starting power to get vehicles back up and running...FAST! No more waiting for batteries to charge — getting the vehicles back to work in mere seconds! FST3000 is the fastest vehicle starting system on the market and can start all vehicles without downtime.
|
|
|
|
|
|
|
|
|
|
FST3000™+Air Vanair Super Capacitor 12/24 Volt 3000 Amp Capacity Jumpstarter
|
|
|
12V Start/Charge - 19 HP EFI Kohler® Gas Plus 24 CFM Air with 30’ 3/0 Arctic Grade Start Cable with 12V Fuel Pump. (no air tank, fuel tank or battery included). FST3000 Vanair Super Capacitor 12 Volt 3000 Amp Capacity Jumpstarter. The Vanair FST3000 featuring the Vanair Super Capacitor (VSC™) provides instantaneous engine starting power to get vehicles back up and running...FAST! No more waiting for batteries to charge — getting the vehicles back to work in mere seconds! FST3000 is the fastest vehicle starting system on the market and can start all vehicles without downtime.
|
|
|
|
|
|
|
|
|
|
FST3000 Vanair Super Capacitor 12/24 Volt 3000 Amp Capacity Jumpstarter
|
|
|
12/24 Volt Start/Charge - 19 HP EFI Kohler® Gas Plus 24 CFM Air with 30’ 3/0 Arctic Grade Start Cable with 12V Fuel Pump. (no air tank, fuel tank or battery included). FST3000 Vanair Super Capacitor 12 Volt 3000 Amp Capacity Jumpstarter. The Vanair FST3000 featuring the Vanair Super Capacitor (VSC™) provides instantaneous engine starting power to get vehicles back up and running...FAST! No more waiting for batteries to charge — getting the vehicles back to work in mere seconds! FST3000 is the fastest vehicle starting system on the market and can start all vehicles without downtime.
|
|
|
|
|
|
|
|
|
|
MR45 Fieldpiece Twin Cylinder Variable Smart Speed 1 HP Recovery Machine
|
|
|
The Fieldpiece MR45 Recovery unit just changed the face of recovery with its advanced features, speed and light weight design. The MR45 is the first variable speed DC motor machine with a digital display. Pump refrigerant easier and quieter than ever before. Connect your hoses without navigating around dark tight spaces or picking the pump off the ground. View status messages and pressures directly on the big bright display. Carry the machine to and from the job site easily and well protected from environmental hazards. Turn the single rubberized control valve to route refrigerant through MR45, and use the self-purge function to pump the last traces into the recovery cylinder instead of being left in the machine or released into the environment.
|
|
|
|
|
|
|
|
|
|
Salvage Operation Refrigerant Recovery Unit Starter Kit
|
|
|
Having a hard time keeping up with work flow in a salvage yard or appliance recycling center? Recovering refrigerant can be time consuming and difficult to manage. This exclusive package from Century allows for the recovery of refrigerant from up to 10 appliances at one time making salvage operations quick and easy. Our package solution offers you the ability to recover 100 or more appliances a day making your work easy and profitable. Our trained staff can even custom build one for you tailored to specific needs.
|
|
|
|
|
|
|
|
|
|
10730 Tiger Tool Freightliner & Peterbilt Low Air Leaf Service Kit
|
|
|
Easily remove and install the Freightliner Airliner and Peterbilt Low Air Leaf rubber isolated pin and bushing while the suspension remains on the vehicle. 20 tons of pulling power. Eliminates risk of damage to nearby components. Machined components manufactured from high-grade metals for strength and durability. Black oxide finished coating resists corrosion. Available as an adapter kit (Part No. 15030) to the 15000 Pin & Bushing Kit. Requires 10,000 PSI hydraulic pump.
|
|
|
|
|
|
|
|
|
|
18200 Tiger Tool Six Point Axle Nut Socket Set 2" - 4" 3/4 Drive
|
|
|
CNC machined from billet, high strength alloy steel to eliminate flaring or rounding out. Features a ¾" drive, engineered for use with up to a 1" impact tool. Set Includes 2" 6 point socket, 2-¾" 6 point socket, 3-⅛" 6 point socket, 3-¾” 6 point socket, 4” 6 point socket.
|
|
|
|
|
|
|
|
|
|
SOX3 Fieldpiece Combustion Checker with Auto Pump
|
|
|
SOX3 Fieldpiece Combustion Checker with Auto Pump - Fast, Easy, Furnace Tuning.The SOX3 Combustion Check is a great tool to easily tune furnaces when a full combustion analysis isn't necessary. Designed specifically for HVACR pros, the SOX3 provides all the essential measurements needed to tune most combustion equipment. It directly measures %O2 and flue temperature, and calculates %CO2, %Excess Air, and combustion efficiency.
|
|
|
|
|
|
|
|
|
|
HG3 Fieldpiece Wireless HVAC Guide System Analyzer
|
|
|
HG3 Fieldpiece Wireless HVAC Guide System Analyzer - Full System Snapshot. Real-time Full System Diagnosis. The Wireless HVAC Guide® System Analyzer will reduce call-backs by giving you a wide variety of tests to diagnose HVACR systems and lower your customer's energy bills. It walks you step-by-step through each test procedure to make your job easier, faster and better.
|
|
|
|
|
|
|
|
|
|
SRL2K7 Fieldpiece Infrared Refrigerant Leak Detector
|
|
|
SRL2K7 Fieldpiece Infrared Refrigerant Leak Detector - Superior Sensitivity in Refrigerant Leak Detection. Pinpoint Accuracy. Infrared Refrigerant Leak Detector for HVACR - Superior Sensitivity in a Rugged Design for HVACR Like all of Fieldpiece's test instruments, the SRL2 Infrared Refrigerant Leak Detector is designed exclusively to make the HVACR Technician's job easier, faster, safer and more efficient. We set out to develop the best refrigerant leak detector for HVACR. We believe the SRL2 is it. It comes in kit form in a rugged, blow-mold case with all of the extras.
|
|
|
|
|
|
|
|
|
|
SMAN440 Fieldpiece Wireless 4-Port Digital Manifold
|
|
|
SMAN440 Fieldpiece Wireless 4-Port Digital Manifold - Live Readings. With All Measurements Shown At One Time. HVACR professionals can do more with the SMAN440 wireless 4-port digital manifold. This innovative digital manifold displays all the readings technicians need at one time, on a large, easy-to-read display: 2 pressures and 7 temperatures. So HVACR pros can view things like target superheat, and superheat and subcooling all at one time. Plus the wireless capabilities allow techs to make system adjustments while seeing in real-time how the changes are affecting the system.
|
|
|
|
|
|
|
|
|
|
SMAN460 Fieldpiece Wireless 4-Port Digital Manifold with Micron Gauge
|
|
|
SMAN460 Fieldpiece Wireless 4-Port Digital Manifold with Micron Gauge - Take Aim!. On Target with Live Measurements. The SMAN460 wireless four-port digital manifold is the top-of-the-line Fieldpiece manifold. It has more features and benefits than any other manifold on the market. With target superheat automatically calculated, simultaneous superheat and subcooling, all 9 measurements displayed on the large, easy-to-read screen, extra large 3/8' full bore and 4th VAC port, and wireless measurements for real-time system diagnosis and charging, the SMAN460 is the manifold HVACR pros trust to do more.
|
|
|
|
|
|
|
|
|
|
SMAN320 Fieldpiece 3-Port Digital Manifold
|
|
|
SMAN320 Fieldpiece 3-Port Digital Manifold - Great Replacement for Your Analog Gauge Set. Dial in Systems with All Measurements In Clear View. HVACR professionals need a refrigerant manifold on nearly every job. Digital manifolds make these jobs faster, easier, and more precise. Check, evacuate, and charge systems faster with the SMAN320. The rugged new screen show everything you need all at once: 2 pressures and 7 temperatures. View your calculated target superheat while monitoring, in real-time, how your charge is affecting actual superheat and subcooling.
|
|
|
|
|
|
|
|
|
|
SMAN340 Fieldpiece 3-Port Digital Manifold with Pipe Clamps Included
|
|
|
SMAN340 Fieldpiece 3-Port Digital Manifold - Clamp On and Charge Up. Hard Working Digital Manifold with Pipe Clamps Included. The SMAN340 hits the mark with its rugged design that's based on years of technician feedback. The SMAN340 digital refrigerant manifold are not only tough, they also show everything HVACR pros need all at once: 2 pressures, and 7 temperatures, plus which refrigerant is being used. View calculated target superheat while monitoring how the charge is affecting actual superheat and subcooling.
|
|
|
|
|
|
|
|
|
|
SMAN360 Fieldpiece 3-Port Digital Manifold with Micron Gauge
|
|
|
SMAN360 Fieldpiece 3-Port Digital Manifold with Micron Gauge - More Features, More Answers. Built Tough for HVACR Professionals. The SMAN360 automatically calculates target superheat, so HVACR professionals don't have to worry about guesswork or manual calculations. WIth the SMAN360 you also get a built-in micron gauge with resolution from 50 to 9,999. Plus the vacuum gauge in the SMAN360 digital refrigerant manifold has a micron alarm which allows technicians to set the alarm to a chosen micron level, and when the vacuum reaches that level, the alarm will sound, freeing you up to keep working when pulling a vacuum.
|
|
|
|
|
|
|
|
|
|
13-440 Goodall Super Boost All Battery Box with connecting cables (13-482)
|
|
|
13-440 Goodall Super Boost All Battery Box with connecting cables (13-482) - Super Boost•All® Battery Box with Connecting Cables for 13-482.
|
|
|
|
|
|
|
|
|
|
02-200 Goodall GPC 2200 Welder, 250 amp; Generator 5,000 watt; Air Compressor 24 cfm with auto idle
|
|
|
02-200 Goodall GPC 2200 Welder, 250 amp; Generator 5,000 watt; Air Compressor 24 cfm with auto idle - Not sure how to fit multiple pieces of equipment on your service vehicle and have any load carrying capacity left? Air Compressor? Welding? AC Power? How about a 3-in-1 compact workhorse unit? Goodall power centers deliver space saving power for service vehicles to get your repair work done quickly and efficiently.
|
|
|
|
|
|
|
|
|
|
02-200-CARB Goodall GPC 2200 Welder, 250 amp; Generator 5,000 watt; Air Compressor 24 cfm with California compliant fuel tank
|
|
|
02-200-CARB Goodall GPC 2200 Welder, 250 amp; Generator 5,000 watt; Air Compressor 24 cfm with California compliant fuel tank - Not sure how to fit multiple pieces of equipment on your service vehicle and have any load carrying capacity left? Air Compressor? Welding? AC Power? How about a 3-in-1 compact workhorse unit? Goodall power centers deliver space saving power for service vehicles to get your repair work done quickly and efficiently.
|
|
|
|
|
|
|
|
|
|
05-100-6 Goodall GPC 5100 Start-All, 700 amp, 12 & 24 volt; Generator 5,000 watt; Air Compressor 23 cfm
|
|
|
05-100-6 Goodall GPC 5100 Start-All, 700 amp, 12 & 24 volt; Generator 5,000 watt; Air Compressor 23 cfm - The GPC 5100 is the workhorse of the power center line. It’s a 4-in-1 system that combines AC generator, air compressor, welder and Start•All® jump starting system all in one easy to install package.
|
|
|
|
|
|
|
|
|
|
11-920ACE Goodall Start-All, 700 amp, 12 volt, w/ 23 cfm Air Compressor & 120 volt AC Generator- Uncovered
|
|
|
11-920ACE Goodall Start-All, 700 amp, 12 volt, w/ 23 cfm Air Compressor & 120 volt AC Generator- Uncovered - With a control panel designed to integrate into a service body, the 11-920ACE unit mounts gauges, controls, oil filter and drain for safety, easy operation and maintenance. this unit also incorporates an AC generator to run power tools, as well as lights to illuminate your worksite.
|
|
|
|
|
|
|
|
|
|
11-921E Goodall Start-All, 700 amp, 12/24 volt, w/ 23 cfm Air Compressor (uncovered)
|
|
|
11-921E Goodall Start-All, 700 amp, 12/24 volt, w/ 23 cfm Air Compressor (uncovered) - With a control panel designed to integrate into a service body, the 11-921E unit mounts gauges, controls, oil filter and drain for safety, easy operation and maintenance.
|
|
|
|
|
|
|
|
|
|
11-922E Goodall Start-All, 700 amp, 12 volt, w/ 23 cfm Air Compressor (uncovered)
|
|
|
11-922E Goodall Start-All, 700 amp, 12 volt, w/ 23 cfm Air Compressor (uncovered) - With a control panel designed to integrate into a service body, the 11-922E unit mounts gauges, controls, oil filter and drain for safety, easy operation and maintenance.
|
|
|
|
|
|
|
|
|
|
11-923ACE Goodall Start-All, 700 amp, 12/24 volt, w/ 23 cfm Air Compressor & 120 volt AC Generator - Uncovered
|
|
|
11-923ACE Goodall Start-All, 700 amp, 12/24 volt, w/ 23 cfm Air Compressor & 120 volt AC Generator - Uncovered - With a control panel designed to integrate into a service body, the 11-923ACE unit mounts gauges, controls, oil filter and drain for safety, easy operation and maintenance. This unit also incorporates an AC generator to run power tools, as well as lights to illuminate your worksite.
|
|
|
|
|
|
|
|
|
|
13-482 Goodall 12 Volt Super Boost-All, Integrated
|
|
|
13-482 Goodall 12 Volt Super Boost-All, Integrated - Designed specifically for those needing only 12 volt jump starting, this version uses auxiliary jump starting batteries with the additional output of the vehicle’s alternator being used to increase the total jump starting power. This is a compact and efficient 12 volt jump starting solution. (Only available in 12 volt configuration).
|
|
|
|
|
|
|
|
|
|
13-485 Goodall Integrated Super Boost-All with Battery Separator
|
|
|
13-485 Goodall Integrated Super Boost-All with Battery Separator
|
|
|
|
|
|
|
|
|
|
FX3030 CPS R-134a / 1234yf Recovery Recycling Recharging Unit With Refrigerant ID
|
Price $7,119.95 FREE Shipping
|
|
|
 CPS Automotive proudly presents the latest in ease and endurance with its FX Series line of Refrigerant Management Centers that quickly and efficiently recover, recycle, and recharge automotive AC systems. Fully compliant in speed and accuracy for R-134a and R1234yf Recovery Recycling Recharging. Fully integrated modern technology with Built-In Refrigerant Identifier and Built-In Printer for system snap-shot. Value added Vehicle Refrigerant Capacity Database Included FREE.
|
|
|
|
|
|
|
|
|
|
FX1234 CPS 1234yf Recovery Recycling Recharging Unit With Refrigerant ID
|
Price $6,981.77 FREE Shipping
|
|
|
CPS Automotive proudly presents the latest in ease and endurance with its FX Series line of Refrigerant Management Centers that quickly and efficiently recover, recycle, and recharge automotive AC systems. Fully compliant in speed and accuracy for R1234yf Recovery Recycling Recharging. Fully integrated modern technology with Built-In Refrigerant Identifier and Built-In Printer for system snap-shot. Value added Vehicle Refrigerant Capacity Database Included FREE.
|
|
|
|
|
|
|
|
|
|
Q600 QuickCable 2/20/65/70/230 Amp 6/12 Volt Automotive Battery Charger With Start
|
|
|
 Q600 QuickCable 2/20/65/70/230 Amp 6/12 Volt Automotive Battery Charger With Start - Built for automotive, farm, fleet and powersport applications. 6V & 12V Timed charger (allows up to 120 minute charger time). Bench top model designed for flooded lead acid batteries. 230A boost capability to start 12V vehicles with discharged batteries. Fan cooled, vacuum-impregnated transformer with multi-diode rectifiers. Polarity protection with safe stop/go light technology built into 500A clamps. Analog charge rate meter. UL Listed 333M Battery Charger. Made in the U.S.A.
|
|
|
|
|
|
|
|
|
|
Q730 QuickCable Heavy-Duty 100/80/50/400 Amp 6/12/18/24 Volt with Start
|
|
|
Q730 QuickCable Heavy-Duty 100/80/50/400 Amp 6/12/18/24 Volt with Start - Built for heavy truck, construction, agricultural equipment, and automotive applications. 6V, 12V, 18V & 24V Timed charger (allows up to 120 minute charger time). Wheeled ALL-WEATHER model designed for flooded lead acid batteries. 400A boost capability to start 12V vehicles with discharged batteries. Fan cooled, vacuum-impregnated transformer with multi-diode rectifiers. Polarity protection with safe stop/go light technology built into 500A clamps. Analog charge rate meters with 16 different variable charge rate capability. UL Listed 333M Battery Charger & CSA Listed for US and Canada. Made in the U.S.A.
|
|
|
|
|
|
|
|
|
|
Q730 QuickCable Heavy-Duty 100/80/50/400 Amp 6/12/18/24 Volt with Start With Free 9308 Gearwrench Set
|
|
|
Q730 QuickCable Heavy-Duty 100/80/50/400 Amp 6/12/18/24 Volt with Start With Free 9308 Gearwrench Set - Built for heavy truck, construction, agricultural equipment, and automotive applications. 6V, 12V, 18V & 24V Timed charger (allows up to 120 minute charger time). Wheeled ALL-WEATHER model designed for flooded lead acid batteries. 400A boost capability to start 12V vehicles with discharged batteries. Fan cooled, vacuum-impregnated transformer with multi-diode rectifiers. Polarity protection with safe stop/go light technology built into 500A clamps. Analog charge rate meters with 16 different variable charge rate capability. UL Listed 333M Battery Charger & CSA Listed for US and Canada. Made in the U.S.A.
|
|
|
|
|
|
|
|
|
|
RG6000-KT PROMAX Ultra Refrigerant Recovery Unit With Tank Overfill Protection
|
|
|
Designed for recovery of medium and high-pressure refrigerants, including R-410A (Puron), Automatic high pressure cut-out switch for safety. Direct liquid recovery without damaging the compressor and an Oil-less compressor which allows for rapid transfer.
| Published Recovery Rates |
| Direct Liquid - 7.00 lb/min |
Direct Vapor - 0.50 lb/min |
Push/Pull - 14.72 lb/min |
|
|
|
|
|
|
|
|
|
|
FMB1224 Solar Truck Mount Starter/Charger 12/24 Volt AGM Batteries
|
|
|
The FMB1224 Solar Truck Mount Starter/Charger 12 24 Volt providing endless jump starts for commercial fleets or heavy construction equipment, this unit will start (spin the starter) of any 12 Volt or 24 Volt engine. Recharges with AC current by means of a wall outlet by its built in charger, or connects permanently to the vehicle's 12 Volt Alternator with supplied wire. A internal 115 volt 10 Amp industrial charger maintains its own lead-acid AGM storage battery and recharges most lead-acid batteries within 4 to 8 hours depending on the number of batteries being charged. The charger constantly monitors its storage battery or the battery it's charging, topping off as needed. It may be used to charge maintenance-free, conventional, deep cycle, gelled electrolyte, and recombination batteries.
|
|
|
|
|
|
|
|
|
|
11-610 Goodall Start-All 12 Volt Gasoline Powered Jump Starter 700 Amp Capacity
|
|
|
GoodAll Start-All 12 Volt 700 Amp Jump Starter is ideal for starting cars, pick-ups, in-town trucks and school buses. The 11-610 Start-All provides continuous voltage-regulated jump starting perfect for starting any 12 volt vehicle up to and including semi-tractors. 12 volt nominal, 700 amp cranking capacity with volt and amp meters to easily monitor boosting output.
|
|
|
|
|
|
|
|
|
|
11-602 Goodall Start-All 12 Volt Gasoline Engine Powered 300 Amp 8 CFM Air Compressor
|
|
|
The GoodAll 11-602 provides 12 Volt 150-300 Amps of jump starting power, as well as an 8 CFM air compressor. Voltage regulation and surge protection with Antizap® circuitry protect on-board electronics and provide a safer boost. Designed for heavy-duty car and light-duty truck applications.
|
|
|
|
|
|
|
|
|
|
11-605 Goodall Start-All 12 Volt Gasoline Engine Powered 450 Amp Capacity
|
|
|
The GoodAll 11-605 Start-All provides 450 Amps of continuous voltage regulated cranking capability. Surge protector with Antizap circuitry provides a safer boost. Gauges/indicators for polarity, low battery, volts, and amps. Designed for starting cars, pick-ups, in-town trucks, semi tractors, and school buses.
|
|
|
|
|
|
|
|
|
|
11-606 Goodall Start-All 12 Volt Gasoline Engine Powered 450 Amp 2000 Watt 120 Volt AC Generator
|
|
|
The 11-606 GoodAll Start-All® is a 2-in-1 booster and AC generator in a compact frame for easy mounting in a service vehicle. A 12 volt-nominal, 450 amp cranking capacity easily jump starts cars, trucks, and school buses. The Powrlite™ AC generator provides 2000 watts of power and one 120-volt duplex GFI outlet to run lights, a heater, and power tools.
|
|
|
|
|
|
|
|
|
|
11-607 Goodall Start-All 12 Volt Gasoline Engine Powered 450 Amp 13 CFM Air Compressor
|
|
|
The 11-607 GoodAll Start-All® is a 2-in-1 booster and Air•All® Air Compressor in a compact frame for easy mounting in a service vehicle. The Air•All® Air Compressor provides 13CFM of air to run air tools or provide tire service. The 12-volt Start-All® provides 450 amps of cranking capacity that easily jump starts cars, trucks, and school buses.
|
|
|
|
|
|
|
|
|
|
11-608 Goodall Start-All 12 Volt Gasoline Engine Powered 450 Amp 13 CFM Air Compressor 2000 Watt 120 Volt AC Generator
|
|
|
The 11-608 GoodAll Start-All® is a 3-in-1 booster, generator, and Air•All® Air Compressor in a compact frame for easy mounting in a service vehicle. The Air•All® Air Compressor provides 155 psi of air to run power tools and provide tire service, while the 2000 watt generator provides power for tools, lights, or a heater. The 12-volt Start-All® provides 450 amps of cranking capacity that easily jump starts cars, trucks, and school buses.
|
|
|
|
|
|
|
|
|
|
11-611 Goodall Start-All 12 Volt Gasoline Engine Powered 700 Amp 2000 Watt 120 Volt AC Generator
|
|
|
The 11-611 GoodAll Start-All® 2-in-1 is a Jump Starter coupled with an AC generator, and is the perfect addition to your service vehicle. Jump start cars through semi tractors with 700 amps of continuous voltage-regulated cranking capability. The AC generator provides 2000 watts of power supplied through a single 120 volt duplex GFI outlet to run power tools, lights, or a heater.
|
|
|
|
|
|
|
|
|
|
11-612 Goodall Start-All 12 Volt Gasoline Engine Powered 700 Amp 13 CFM Air Compressor
|
|
|
The 11-612 GoodAll Start-All® is a 2-in-1 700 amp Jump Starter and 13 CFM Air Compressor in a compact frame for easy mounting in a service vehicle. With 700 amps of cranking capacity, the 12-volt Start-All® easily jump starts cars, trucks, school buses, and semi tractors, while the Air•All® Air Compressor provides a maximum 155 psi of air to run air tools and provide tire service.
|
|
|
|
|
|
|
|
|
|
11-620 Goodall Start-All 12/24 Volt Gasoline Engine Powered 700 Amp Capacity
|
|
|
The 11-620 GoodAll Start-All provides 12 and 24 volt starting power for cars and trucks up to off-road, transit, and military equipment. Get 400 amps of cranking capacity with the volt selector switch set to 24 volts nominal; 700 amps at 12 volts. Voltage is continuously regulated to protect on-board electronics, and volt and amp meters allow boost output to be monitored. Polarity and low battery LED indicators and GoodAll's Anitzap surge protection provide for a safer boost.
|
|
|
|
|
|
|
|
|
|
11-621 Goodall Start-All 12/24 Volt Gasoline Engine Powered 700 Amp 2000 Watt 120 Volt AC Generator
|
|
|
The 11-621 GoodAll Start-All is a 2-in-1 booster and AC Generator. It provides 12 and 24 volt starting power for cars up to and including off-road, transit, and military equipment, as well as power to run lights, electric tools, and or a heater. Get 2000 watts of power though a 120 volt duplex GFI outlet. For boosting, get 400 amps of continous voltage regulated cranking capacity when set to 24 volts nominal; 700 amps at 12 volts.
|
|
|
|
|
|
|
|
|
|
11-622 Goodall Start-All 12/24 Volt Gasoline Engine Powered 700 Amp 13 CFM Air Compressor
|
|
|
The 11-622 GoodAll Start-All is a 2-in-1 booster and 13 CFM Air-compressor in a compact frame for mounting. It provides 12 and 24 volt starting power for cars up to and including off-road, transit, and military equipment, as well a 13 CFM air compressor to run air tools and for tire service. When boosting, get 400 amps of cranking capacity with the volt selector switch set to 24 volts nominal; 700 amps at the 12 volt setting.
|
|
|
|
|
|
|
|
|
|
11-802 Goodall Start-All 12 Volt Service Truck Hydraulic Powered 600 Amp Capacity
|
|
|
The GoodAll 11-802 is a hydraulic powered Start-All. It provides 600 amps of starting power for any 12 volt vehicle up to and including semi tractors. The voltage is regulated to protect on-board electronics, and volt and amp meters allow monitoring of the boosting output.
|
|
|
|
|
|
|
|
|
|
11-807 Goodall Start-All 12/24 Volt Service Truck Hydraulic Powered 600 Amp Capacity
|
|
|
The GoodAll 11-807 is a hydraulic powered Start-All for 12-volt vehicles up to and including semi tractors, and 24-volt heavy, transit, and military equipment. Set the volt selection switch to 24 volts nominal for 350 amps of voltage regulated cranking capacity, and 12 volts for 600 amps. Volt and amp meters allow monitoring of the boosting output.
|
|
|
|
|
|
|
|
|
|
11-811 Goodall Start-All 12/24 Volt Service Truck Hydraulic Powered 1000 Amp Capacity
|
|
|
The 11-811 is GoodAll's most powerful Start-All! Jump start 24-volt heavy, transit or military equipment with 600 amps of voltage regulated cranking capacity, and any 12 volt vehicle with 1000 amps. A volt selector switch allows easy selection between 12 and 24-volt operation, and volt and amp meters allow monitoring of boosting output.
|
|
|
|
|
|
|
|
|
|
11-920 Goodall Start-All 12 Volt Service Truck Gasoline Engine Powered 600 Amp 23 CFM Air
|
|
|
The 11-920 GoodAll Start-All is specifically designed for mounting in the load space between the side packs on a service truck body, with the control panel mounted in the first panel on the curb side for convenience and safety. This 2-in-1 unit provides 600 amps of cranking capacity to start any 12 volt vehicle up to and including semi tractors, as well as 23 CFM at 100 psi of air to run air tools and tire service.
|
|
|
|
|
|
|
|
|
|
11-921 Goodall Start-All 12/24 Volt Service Truck Gasoline Engine Powered 600 Amp 23 CFM Air (Uncovered)
|
|
|
The 11-921 GoodAll Start-All is specifically designed for mounting in the load space of a service truck body, with the control panel mounted on the curb side of the vehicle. This 2-in-1 unit provides 23 CFM of air to run air tools and tire service, and both 12-volt (600 amp) and 24-volt (350 amps) jump start service for cars up through off-road, transit, and military equipment.
|
|
|
|
|
|
|
|
|
|
11-923AC Goodall Start-All 12/24 Volt Service Truck Gasoline Engine Powered 600 Amp 23 CFM Air 6000 Watt 120 Volt AC Generator
|
|
|
The 11-923AC GoodAll Start-All is specifically designed for mounting in the load space on a service truck body, with the control panel mounted on the curb side of the vehicle. This 3-in-1 unit provides 23 CFM of air to run air tools and tire service; 6000 watts of power to run power tools, lights, and a heater; both 12-volt and 24-volt jump start service for cars up through off-road, transit, and military equipment.
|
|
|
|
|
|
|
|
|
|
61-800 Goodall Single Cable Conversion Kit 12/24 To 12 Volt Only
|
|
|
Stop using outdated technology! Get the benefit of reverse current protection to keep your generator safe and advanced voltage regulation for today's sensitive vehicle electronics. Our Upgrade Kits provide simple operation with all the controls and instructions in one location. You'll prefer the simplicity of full-power boosting through one set of cables. Upgrade Kits include Voltage Control provides regulated voltage that is safe for vehicles and on-board electronics. Reverse Current Shutdown Protection eliminates expensive repairs to the Start•All® if the unit runs out of gas. Reverse Polarity Protection will not allow the Start•All® to be turned on if the cables are not hooked up correctly. 30 ft., 1/0 cable with 1000 amp clamps with full-power jaws and polarity indicator. All-internal wiring, solenoids and switches, Volt and amp meters, Instructions and wiring diagram.
|
|
|
|
|
|
|
|
|
|
7553 ATD Tools Hydraulic Strut Compressor
|
|
|
Hydraulic Strut Compressor
|
|
|
|
|
|
|
|
|
|
7883 ATD Tools Large Capacity Air Desiccant Air Drying System - 1/2” Pipe, 30 SCFM
|
|
|
The Large Capacity 5 stage desiccant drying system removes water, dirt, debris and pipe scale; removes oil aerosols and microscopic particles; adsorbs water vapor; filtrates desiccant dust; reduces pressure to required level.
|
|
|
|
|
|
|
|
|
|
6387 Central Tools 2000 Ft./Lbs. Torque Multipliers
|
|
|
The 6387 2000 ft./lbs. Torque MultiPliers increases the range of your torue wrench by a 4:1 ratio! It is designed with four pinion gears in a compact housing.
|
|
|
|
|
|
|
|
|
|
2171XP Ingersoll-Rand 1" Ultra-Duty Air Impact Wrench
|
|
|
The IR2171XP 1” Ultra-Duty Air Impact Wrench combines an enhanced twin hammer mechanism, ergonomic design, and a 360° swivel inlet with a high efficiency air motor.
|
|
|
|
|
|
|
|
|
|
271 Ingersoll-Rand 1" Super-Duty Air Impact Wrench
|
|
|
The shortest 1” drive air impact wrench is also one of the most powerful. It combines a very compact size with high power output, making it ideal for tire changing, spring work, pinion nut and tractor pad removal, and shock work. This 1” Super-Duty Air Impact Wrench delivers an impressive 1,100 ft-lbs of torque.
|
|
|
|
|
|
|
|
|
|
295A Ingersoll-Rand 1” Heavy-Duty Air Impact Wrench
|
|
|
A new, improved 1” drive tool perfect for truck and heavy equipment maintenance. The IR295 offers power and convenience at an affordable price. It's compact and lightweight - perfect for working on suspension components, tractor pads, and other big capacity general repair functions.
|
|
|
|
|
|
|
|
|
|
1770A OTC Tools 3/4-Ton Hydraulic Wheel Dolly
|
|
|
3/4-Ton Hydraulic Wheel Dolly. Remove, transport, and replace dual wheel and tire assemblies without strain or struggle, provides almost 5" of lift and tilts wheel assembly 4° to prevent damage to wheel seal. Swivel casters for easy maneuverability. 6' chain holds load in place. 1,500 lb. maximum capacity. Floor space is 45" by 41". Includes a 6' support chain to hold load in place
|
|
|
|
|
|
|
|
|
|
3688 OTC Tools Genisys Scope Module With Infotech 2006 Driveability Software Kit
|
|
|
Genisys Scope Module with InfoTech 2006 Driveability Software Kit
|
|
|
|
|
|
|
|
|
|
6525 OTC Tools Leakmaster Evaporative Emissions System Tester
|
|
|
OTC 6525 Leakmaster Evaporative Emissions System Tester - LeakMaster’s simple two-step process makes testing today’s most advanced OBD-II systems quick and easy. You simply connect the unit to the vehicle’s EVAP service port and battery. The OTC LeakMaster 6525 can be calibrated to identify leaks at .020 and .040 (thousandths of an inch). The OTC LeakMaster 6525 indicates, with a Pass/Fail, if the system being tested has unacceptable leakage. There’s no more guesswork.
|
|
|
|
|
|
|
|
|
|
6770 Sharpe Membrane Air Drying System
|
|
|
Originally Designed for OEM Application, the Membrane Air drying System is now available for shop use. Maintenance-free, lightweight, easy to install, and simple to operate. No refrigerant or desiccants to replace, and no regeneration is required.
|
|
|
|
|
|
|
|
|
|
2190TI-6 Ingersoll-Rand 1" Titanium-Duty Air Impact Wrench With Extended Anvil
|
|
|
Get the newest member on the Titanium Team. Designed specifically for tire changing, the chainsaw handle provides comfortable control for the operator. The 2190Ti delivers devastating torque in a lightweight package and comes standard with a 6" extended anvil.
|
|
|
|
|
|
|
|
|
|
261-6 Ingersoll-Rand 3/4" Super-Duty Air Impact Wrench With 6" Extended Anvil
|
|
|
The highly-regarded 261 model combines compact size at only 14.8" long with high output, which makes it perfect for everything from spring work to pinion nut and track pad removal and major engine teardowns. This 3/4" air impact wrench is also a popular truck tire tool.
|
|
|
|
|
|
|
|
|
|
2161XP Ingersoll-Rand 3/4” Ultra-Duty Air Impact Wrench
|
|
|
The IR2161XP combines an enhanced twin hammer mechanism, ergonomic design, and a 360° swivel inlet with a high efficiency air motor to create the most powerful 3/4”Impact in the Automotive Industry.
|
|
|
|
|
|
|
|
|
|
86043 SK Hand Tool 23 Pc. Superkrome Fractional Combination Wrench Set
|
|
|
23 pc. SuperKrome Fractional Wrench Set
|
|
|
|
|
|
|
|
|
|
86049 SK Hand Tool 21 Pc. Superkrome Fractional Long Pattern Combination Wrench Set
|
|
|
21 pc SuperKrome Fractional Wrench Set
|
|
|
|
|
|
|
|
|
|
5217 ATD Tools Air Operated High Pressure Grease Pump For 120 Lbs. Drum
|
|
|
5217 ATD Tools Air Operated High Pressure Grease Pump For 120 Lbs. Drum features a 50:1 Heavy Duty double acting pump which provides uniform high pressure. Includes: Roll-a-round Base, Follower Plate, Air Motor Cover, Lincoln-style Air Coupler, Control Valve (ATD-5218), Steel Drum Cover with screw downs, 6’ High Pressure Hose, and Pump Muffler. Barrel Not Included
|
|
|
|
|
|
|
|
|
|
5289 ATD Tools Air Operated High Pressure Grease Pump For 25 To 50 Lbs. Drums
|
|
|
5289 ATD Tools Air Operated High Pressure Grease Pump For 25 To 50 Lbs. Drums. Drums part #:ATD-5289. 1 H.D. Double Acting Pump, Steel Drum cover with screw downs, Control Valve (ATD-5218), 6’ High Pressure Hose, Pump Muffler, Lincoln-style Air Coupler, Rated NLG #2 Grease. Other features include, Steel Drum cover with screw downs, a control Valve (ATD-5218), 6’ High Pressure Hose, Pump Muffler, Lincoln-style Air Coupler, Rated NLG #2 Grease.
|
|
|
|
|
|
|
|
|
|
7321 ATD Tools Heavy-Duty 20-Ton Wide Truck Ramps
|
|
|
|
|
|
|
|
|
|
|
|
|
7322 ATD Tools 22-Ton Air/Hydraulic Axle Jack
|
|
|
7322 ATD Tools 22-Ton Air/Hydraulic Axle Jack. Jack Size: 22-7/8" L x 12-1/2" x 9-5/8" H. Lifting Range: 9-1/2" to 19-1/2", 2-1/2” Extension. One Piece Handle and comes with FREE 2-1/2" extension. Provides quick, effortless lifts of rated capacity loads. Patented by-pass device prevents over pumping. Meets ASME/ANSI - PALD Safety Standards.
|
|
|
|
|
|
|
|
|
|
7390 ATD Tools 5-Ton Long Chassis Hydraulic Service Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7391 ATD Tools 10-Ton Long Chassis Hydraulic Service Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7392 ATD Tools 20-Ton Air Hydraulic Long Chassis Service Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7404 ATD Tools 500 Lbs. Clutch Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7430 ATD Tools 1/2-Ton Ratcheting Head Telescopic Hydraulic Transmission Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7431 ATD Tools 1/2-Ton Ratcheting Head Telescopic Air Hydraulic Transmission Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7433 ATD Tools 1-Ton Telescoping High Lift Transmission Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7436 ATD Tools 1-Ton Low Lift Hydraulic Transmission Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7437 ATD Tools 1-1/2-Ton Low Lift Hydraulic Transmission Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
7454 ATD Tools 20-Ton Hydraulic Shop Press With Bottle Jack
|
|
|
|
|
|
|
|
|
|
|
|
|
84725 ATD Tools Plastic Benchtop Cabinet Blaster
|
|
|
|
|
|
|
|
|
|
|
|
|
1505B OTC Tools 5-Ton Stinger Service Jack
|
|
|
1505B OTC Tools 5-Ton Stinger Service Jack. A built-in safety overload prevents using the jack beyond its rated capacity. A convenient foot pedal speeds the lifting operation, handle lock and release control are located on top of the 40" spring-loaded handle. Handle can be locked into any position from vertical to horizontal. Lifting range: 6" to 22", reach: 47". Frame height: 7-3/4", floor space: 56" x 14-3/4".
|
|
|
|
|
|
|
|
|
|
1510B OTC 10-Ton Service Jack
|
|
|
A built-in safety overload prevents using the jack beyond its rated capacity. Convenient foot pedal speeds the lifting operation. Handle lock and release control are located on top of the handle. Spring-loaded 43-1/4" handle can be locked into any position from vertical to horizontal.
|
|
|
|
|
|
|
|
|
|
1590 OTC 10-Ton Air Lift
|
|
|
OTC 1590 10-Ton Air Lift provides 10 tons of lift at 200 PSI air pressure. Adjustable lifting saddles and an extra wide stance for extra stability. Lifting range is 13" to 52". Automatic mechanical safety catch engages in five height positions.
|
|
|
|
|
|
|
|
|
|
1728 OTC 1000 Lbs. Capacity High-Lift Transmission Jack (Air Assisted)
|
|
|
OTC 1728 1,000 lb Capacity High-Lift Transmission Jack - Air assist first stage for speed; second stage is hydraulically actuated for precision. Height range is 34-1/2" to 75". Maximum tilt is 50° forward to 20° backward and 10° to either side. Lifetime Marathon Warranty.
|
|
|
|
|
|
|
|
|
|
1750A OTC 6000 Lb. Capacity Heavy-Duty Engine Stand
|
|
|
OTC 1750A 6000 lb. Revolver Diesel Engine Stand - 96 to 1 ratio worm and gear set rotates components a full 360°; handle locks in any position. Includes 205061 universal mounting plate for use with individual engine adapter plates.
|
|
|
|
|
|
|
|
|
|
1793A OTC Tools Air Assisted 1000 Lbs. Capacity Stinger Hi-Lift Transmission Jack
|
|
|
OTC 1793A 1,000 lb Capacity High-Lift Transmission Jack - Universal saddle tilts front to back and side to side; features adjustable corner brackets and safety chain for optimum positioning of the load. Flash-chromed rams inhibit rust from entering the hydraulic system.
|
|
|
|
|
|
|
|
|
|
1820 OTC 4400 Lbs. Floor Crane
|
|
|
OTC 1820 4,400 lb Capacity Heavy-Duty Crane - Space-saving fold-away feature for storage. Adjustable leg spread for "close-in" work. Telescoping boom extension for added reach. Equipped with 2-speed hydraulic hand pump. 18-3/8" lifting chain.
|
|
|
|
|
|
|
|
|
|
2004 OTC Tools 4000 Lbs. Stinger Folding Engine Crane
|
|
|
OTC 2004 4,000 lb Capacity Folding Floor Crane - This 4,000 lb floor crane folds for compact storage, has a reach of 25" to 46" with 3-1/2" front wheels and 5-7/8" rear casters.
|
|
|
|
|
|
|
|
|
|
5078 OTC 2000 Lbs. Heavy-Duty Transmission Jack For Trucks And Buses (Air)
|
|
|
OTC 5078 Air-Assisted 2,000 lb Capacity High-Lift Transmission Jack for Trucks & Buses - Low height of 41-1/2" allows transmission to be rolled out from under vehicle's frame. Foot-operated air pump enables the operator to effortlessly raise the transmission into place. Rugged heavy wall tubing and oversized base for stability. A dedicated adapter for Allison 500 and 600 series automatic transmission is included.
|
|
|
|
|
|
|
|
|
|
5268 OTC 20-Ton Truck Ramps - Pair
|
|
|
OTC 5268 20-ton Truck Ramps (Pair) - Designed to be used on tractor trucks (semis) these ramps feature 10" wide treads, 33" long retractable handles, overall length of 51", non skid rubber matting, heavy-duty rubber wheels and they are covered by the OTC Lifetime Marathon Warranty®.
|
|
|
|
|
|
|
|
|
|
5269 OTC 20-Ton Wide Truck Ramps
|
|
|
OTC 5269 20-ton Wide Truck Ramps - Designed to be used on trucks with wider front wheels / tires (cement, garbage and dump trucks) these ramps feature 16" wide treads, 33" long retractable handles, overall length of 51", non skid rubber matting, heavy-duty rubber wheels and they are covered by the OTC Lifetime Marathon Warranty®.
|
|
|
|
|
|
|
|
|
|
63201 Wilton 6-1/2” Tradesman Vise
|
|
|
|
|
|
|
|
|
|
|
|
|
63202 Wilton 8” Tradesman Vise (1780A)
|
|
|
|
|
|
|
|
|
|
|
|
|
130522 DeVilbiss Camair CT Plus 5-Stage Filtration System
|
|
|
Camair CT Plus 5-Stage Filtration System is unsurpassed in quality. The first stage filter removes oil, water, and dirt down to 5 microns. The second stage coalescer removes oil vapors and dirt particles down to .01 microns. The CT30 desiccant tank repeats dirt and oil aerosol removal and eliminates humidity.
|
|
|
|
|
|
|
|
|
|
DAD500 DeVilbiss Desiccant Air Dryer System
|
|
|
Eliminates costly redo’s due to moisture and dirt in the air line with it's features three stage drying and filtering system!
|
|
|
|
|
|
|
|
|
|
H1921 DeVilbiss 5/16" Bulk Air Hose (500'Reel)
|
|
|
5/16" Bulk Air Hose (500'Reel)
|
|
|
|
|
|
|
|
|
|
|
H1958 DeVilbiss Bulk Air Hose, 3/8"
|
|
|
Bulk Air Hose, 3/8"
|
|
|
|
|
|
|
|
|
|
132 Ingersoll-Rand Super-Duty Air Hammer
|
|
|
Professionals who want the best choose this tool for front end work, heavy exhaust work, riveting, king pin removal, bushing driving and bolt shearing.
|
|
|
|
|
|
|
|
|
|
2161XP-6 Ingersoll-Rand 3/4" Ultra-Duty Air Impact Wrench - Extra Performance With 6" Extended Anvil
|
|
|
The -2161XP combines an enhanced twin hammer mechanism, ergonomic design, and a 360º swivel inlet with a high efficiency air motor to create the most powerful 3/4”Impact in the Automotive Industry.
|
|
|
|
|
|
|
|
|
|
2190TI Ingersoll-Rand 1" Titanium-Duty Air Impact Wrench
|
|
|
Designed specifically for tire changing, the chainsaw handle provides comfortable control for the operator.
|
|
|
|
|
|
|
|
|
|
261-3 Ingersoll-Rand 3/4" Super-Duty 3" Extended Anvil Air Impact Wrench
|
|
|
The highly-regarded -261 model combines compact size with high output, which makes it perfect for everything from spring work to pinion nut and track pad removal and major engine teardowns.
|
|
|
|
|
|
|
|
|
|
280 Ingersoll-Rand 1” Super-Duty Air Impact Wrench
|
|
|
Provides maximum protection for harsh environment
|
|
|
|
|
|
|
|
|
|
280-6 Ingersoll-Rand 1” Super-Duty Air Impact Wrench With 6” Extended Anvil
|
|
|
Here’s the ultimate in quality, the 1” drive wrench with 1,600 ft.
|
|
|
|
|
|
|
|
|
|
285B Ingersoll-Rand 1" Heavy-Duty Air Impact Wrench
|
|
|
The - model combines exceptional power, durability and operator convenience.
|
|
|
|
|
|
|
|
|
|
|
285B-S6 Ingersoll-Rand 1"DR Spline Impact Wrench
|
|
|
Ingersoll Rand 1"DR SPLINE IMPACT WRENCH
|
|
|
|
|
|
|
|
|
|
290 Ingersoll-Rand 1” Super-Duty Air Impact Wrench
|
|
|
Designed for getting into cramped spaces with big power, the - has a three-way adjustable handle.
|
|
|
|
|
|
|
|
|
|
293 Ingersoll-Rand 1" Super-Duty Air Impact Wrench
|
|
|
This is the most powerful 1” wrench for spring work, tractor pads, bus maintenance, and off-road and farm equipment work.
|
|
|
|
|
|
|
|
|
|
|
SS3J5.5GH-WB Ingersoll Rand Compressors 5.5HP Gas 8G Twin Honda
|
|
|
5.5HP GAS 8G TWIN HONDA
|
|
|
|
|
|
|
|
|
|
7000 Mo-Clamp Universal Tram Gauge With Case
|
|
|
Mo-Clamp 7000 Universal Tram Gauge with Storage Case - Tram Instruments are a versatile and indispensable tool for determining collision damage to unibody cars and for checking critical measurements during repair. Use the tram to check dimensions between control points on suspension and mechanical components.
|
|
|
|
|
|
|
|
|
|
804011 Nexiq Technologies Mack V-Mac III - Step 8 V6.2
|
|
|
Mack Truck V-MAC III vehicle management systems
|
|
|
|
|
|
|
|
|
|
807024 Nexiq Technologies Caterpilar Electronic Engine Systems With Acert Technology
|
|
|
Now, you can diagnose Cat engines with ACERT Technology, using all the diagnostic features and functions you depend on with the existing Caterpillar cartridge.
|
|
|
|
|
|
|
|
|
|
4201 OTC Tools Nozzle-Tester Adapter Set
|
|
|
This is our universal adapter set for testing injection nozzles on the most popular automotive, agricultural, and construction diesel engines.
|
|
|
|
|
|
|
|
|
|
5090 OTC Tools Back Buddy II - Truck Hub And Brake Drum Handler
|
|
|
OTC 5090 Back Buddy™ II - Truck Hub and Brake Drum Handler
|
|
|
|
|
|
|
|
|
|
9851 OTC Tools Locknut Display
|
|
|
OTC 9851 8-pt Wheel Bearing Locknut Sockets with Tool Board - Wheel bearing locknuts are easy to remove or install with these specially designed sockets. They're made of high-strength steel and resist rounding out.
|
|
|
|
|
|
|
|
|
|
M2 Sidewinder Solvent Recovery System
|
|
|
The Sidewinder model M-2 Solvent Recovery System, made in the USA, has become the industry’s number one choice because it’s hassle free and saves dollars.
|
|
|
|
|
|
|
|
|
|
|
7320 ATD Tools Heavy-Duty 20-Ton Truck Ramps
|
|
|
ATD7320 ATD Tools Heavy-Duty 20-Ton Truck Ramps
|
|
|
|
|
|
|
|
|
|
|
7432 ATD Tools 1/2 Ton Economy Telescopic Transmission Jack
|
|
|
ATD7432 ATD Tools 1/2 Ton Economy Telescopic Transmission Jack
|
|
|
|
|
|
|
|
|
|
1127 OTC Tools Bearing Splitter
|
|
|
OTC 1127 Bearing Splitter 3/4" to 13-3/8" feature “knife-like” edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited.
|
|
|
|
|
|
|
|
|
|
1522A OTC Tools Tools 2000 Lbs. Stinger Low Hydraulic Transmission Jack
|
|
|
OTC1522A OTC Tools & Equipment 2000 lbs. Stinger® Low Hydraulic Transmission Jack is a rugged, stable unit is ideal for handling heavy transmissions. Includes adapter plate for Eaton®, Fuller®, and Road Ranger® transmissions. The low profile design gets under the lowest clearance trucks, making it ideal for clutch repair work. Features include a pump handle that rotates 360º for operator convenience and safety overload prevents use beyond its rated capacity. Height range 6-1/2” to 35”.
|
|
|
|
|
|
|
|
|
|
1794A OTC Tools Air Assisted 1000 Lbs. Capacity Stinger Transmission Jack
|
|
|
OTC 1794A Air-Assisted 1,000 lb Capacity High-Lift Transmission Jack - Air-assist primary stage for rapidly raising the mounting head, activated by depressing foot pedal. Hydraulic secondary stage for precise operator control, activated by a hand pump to raise the load, and a release knob to lower the load.
|
|
|
|
|
|
|
|
|
|
54610 SK Hand Tool 46” Width 10-Drawer Extra Heavy-Duty Ball-Bearing Pro Box Chest - Black
|
|
|
SKT54610 SK Hand Tool 46” Width 10-Drawer Extra Heavy-Duty Ball-Bearing Pro Box Chest - Black
|
|
|
|
|
|
|
|
|
|
|
54610BLU SK Hand Tool 46” Width 10-Drawer Extra Heavy-Duty Ball-Bearing Pro Box Chest - Blue
|
|
|
SKT54610BLU SK Hand Tool 46” Width 10-Drawer Extra Heavy-Duty Ball-Bearing Pro Box Chest - Blue
|
|
|
|
|
|
|
|
|
|
|
54610RED SK Hand Tool 46” Width 10-Drawer Extra Heavy-Duty Ball-Bearing Pro Box Chest - Red
|
|
|
SKT54610RED SK Hand Tool 46” Width 10-Drawer Extra Heavy-Duty Ball-Bearing Pro Box Chest - Red
|
|
|
|
|
|
|
|
|
|
|
55110 SK Hand Tool 51" Width 10-Drawer Ball-Bearing Probox Chest - Black
|
|
|
SKT55110 SK Hand Tool 51” Width 10-Drawer Ball-Bearing ProBox Chest - Black
|
|
|
|
|
|
|
|
|
|
|
55610 SK Hand Tool 56” Width 10-Drawer Extra-Heavy Duty Ball-Bearing Hercules Pro Chest, Black
|
|
|
SKT55610 SK Hand Tool 56” Width 10-Drawer Extra-Heavy Duty Ball-Bearing Hercules Pro Chest, Black
|
|
|
|
|
|
|
|
|
|
|
55610BLU SK Hand Tool 56” Width 10-Drawer Extra-Heavy Duty Ball-Bearing Hercules Pro Chest, Blue
|
|
|
SKT55610BLU SK Hand Tool 56” Width 10-Drawer Extra-Heavy Duty Ball-Bearing Hercules Pro Chest, Blue
|
|
|
|
|
|
|
|
|
|
|
55610RED SK Hand Tool 56” Width 10-Drawer Extra-Heavy Duty Ball-Bearing Hercules Pro Chest, Red
|
|
|
SKT55610RED SK Hand Tool 56” Width 10-Drawer Extra-Heavy Duty Ball-Bearing Hercules Pro Chest, Red
|
|
|
|
|
|
|
|
|
|
|
87920 SK Hand Tool 20 Pc. 6-Point Deep Fractional Impact Socket Set
|
|
|
SKT87920 SK Hand Tool 20 pc. 6-Point Deep Fractional Impact Socket Set
|
|
|
|
|
|
|
|
|
|
4695 Sunex Tools 3/4” Drive Deep 29pc SAE Impact Socket Set With Rolling Heavy-Duty Blow Molded Case
|
|
|
Sunex Tools 4695 3/4" Drive 29 Piece SAE Deep Impact Socket Set - No-Slip design in forged cro-moly steel grips flats of fasteners not the corners. Lifetime manufacturer’s warranty.
|
|
|
|
|
|
|
|
|
|
DBT2 GoJak 2-Ton Rak Jak Model DBT2
|
|
|
RakJak™ Model DBT2 - Good Thing...Small Package. Pneumatic jacks designed tough and built to last.
|
|
|
|
|
|
|
|
|
|
TBT2 GoJak 2-Ton Rak Jak Model TBT2
|
|
|
<p>RakJak™ Model TBT2 - Capacity 2000 kg* (*2 tons at 8 bar - 105 psi.). Relaxed height 17.3cm (6.812"). Full extension 45.7cm (18"). Air pressure 8 bar. 2-year limited warranty.</p>
|
|
|
|
|
|
|
|
|
|
1783 OTC Tools 20-Ton Adjustable Support Jack Stand
|
|
|
OTC 1783 Heavy-Duty 20-Ton Capacity Adjustable Support - This Heavy-Duty 20-Ton Capacity with Adjustable Support is designed for the really big service jobs. Rugged steel construction, and large 15-1/2" square base will satisfy support requirements up to 40,000 lbs.
|
|
|
|
|
|
|
|
|
|
1824A OTC Tools 20-Ton Hydraulic Shop Press
|
|
|
1824A OTC Tools 20-Ton Hydraulic Shop Press - Economical press for bending, pressing, and straightening work. Works great for removal and installation of gears, bearings, and bushings. 20-ton bottle jack with 7-1/2" stroke.
|
|
|
|
|
|
|
|
|
|
1833 OTC Tools 25-Ton Shop Press
|
|
|
OTC 1833 25-Ton Shop Press - Tough, economical press is ideal for pressing rear axle bearings, piston pins, and much more. Large 30" x 46" work area under ram makes positioning of even bulky work easy. Press bed is easily raised and lowered by a dependable lifting mechanism. Press complete with No. 4002 hydraulic hand pump; No. 9652 gauge; No. 24815 tee; No. 9767 hose (1/4" ID x 6'); hydraulic ram No. 51426 with 6-1/4" stroke; and 42733-WH2 pump mounting bracket.
|
|
|
|
|
|
|
|
|
|
1881 OTC Tools Accessory Set For 25-Ton Capacity Presses
|
|
|
OTC 1881 Accessory Set for 25-Ton Capacity Presses - Accessories attach to ram's forcing screw or support work on the press bed.
|
|
|
|
|
|
|
|
|
|
61-803 Goodall Single Cable Convertion Kit 12/24 Volt
|
|
|
Stop using outdated technology! Get the benefit of reverse current protection to keep your generator safe and advanced voltage regulation for today's sensitive vehicle electronics. Our Upgrade Kits provide simple operation with all the controls and instructions in one location. You'll prefer the simplicity of full-power boosting through one set of cables. Upgrade Kits include Voltage Control provides regulated voltage that is safe for vehicles and on-board electronics. Reverse Current Shutdown Protection eliminates expensive repairs to the Start•All® if the unit runs out of gas. Reverse Polarity Protection will not allow the Start•All® to be turned on if the cables are not hooked up correctly. 30 ft., 1/0 cable with 1000 amp clamps with full-power jaws and polarity indicator. All-internal wiring, solenoids and switches, Volt and amp meters, Instructions and wiring diagram.
|
|
|
|
|
|
|
|
|
|
37882 Yellow Jacket SAE J-2788 Automatic Refrigerant Management System with 15 Foot Hoses and 5 CFM Vacuum Pump
|
Price $4,399.95 Free Shipping
|
|
|
The Yellow Jacket RMS 37880 Automatic Refrigerant Management System provides full cycle recovery / recycle / evacuate / recharge to bring the vehicle back to SAE J-2788 factory specifications with the press of one button.
|
|
|
|
|
|
|
|
|
|
1585A OTC Power Train Lift
|
|
|
OTC 1585A Power Train Lift - Ideal for engine and transaxle service. Supports up to 1,250 lbs. Compact design and swivel casters for easy maneuverability. Comes with tilting plate. Height range is 29-1/2" to 68-1/2".
|
|
|
|
|
|
|
|
|
|
AR2700 CPS Pro-Set Single Gas Recovery Recycling Recharging Unit
|
Price $3,099.95 FREE Shipping
|
|
|
Fully Compliant with EPA Requirements For All Appliances. This Equipment Has Been Certified By Underwriters Laboratories Inc. To Meet EPA’s Minimum Requirements For Recovery Equipment Intended For Use With All Appliances Containing Refrigerant R134a, R12, R22, R502, R404a, R402a, R401a, R407c, R409a. UL Control Number 2HA5. No assembly required! Simply remove the packaging material and add refrigerant. Automatic programmable charging. Lo side or Hi side or Hi & Lo side charging. AR2700M series includes a pump down valve for multiple refrigerant use. Multi language selectable in English, Spanish, French, German, and Chinese.
|
|
|
|
|
|
|
|
|
|
|
AR2700M CPS Pro-Set Multi Gas Recovery Recycling Recharging Unit
|
Price $3,499.95 FREE Shipping
|
|
|
Fully Compliant with EPA Requirements For All Appliances. This Equipment Has Been Certified By Underwriters Laboratories Inc. To Meet EPA’s Minimum Requirements For Recovery Equipment Intended For Use With All Appliances Containing Refrigerant R134a, R12, R22, R502, R404a, R402a, R401a, R407c, R409a. Ul Control Number 2HA5. No assembly required! Simply remove the packaging material and add refrigerant. Automatic programmable charging. Lo side or Hi side or Hi & Lo side charging. AR2700M series includes a pump down valve for multiple refrigerant use. Multi language selectable in English, Spanish, French, German, and Chinese.
|
|
|
|
|
|
|
|
|
|
XP2260 Schumacher 12 Volt 1200 Peak Amp Instant Portable Power Source, Air Compressor
|
Price $169.95 Deal of the Day Price: $139.95
|
|
|
A built-in charger for automatic charging of the internal battery; just connect an extension cord to the plug to recharge. The battery status LEDs tell when a battery is charged or needs to be charged. The Sure-Grip Clamps fit both top and side-mount batteries. The cable will stay flexible in the coldest weather. A maintenance-free, sealed lead acid battery allow for storage in any position. Unit includes built in USB port to charge cell phones, black berries, and other modern, portable devices.
|
|
|
|
|
|
|
|
|
|
13-097-10 Goodall Vehicle-Mounted CapStart 24 Volt 3000 Amp
|
|
|
The 13-097-10 Goodall Vehicle-Mounted CapStart is Powerful, maintenance-free, capacitor-powered jump starting unit delivering over 3000 amps of power. Want to start an M1 Abrams tank? Thirty heavy duty Caterpillar dozers in below zero temperatures? How about twenty transit buses on a bone chilling morning? The Goodall® CapStart generates over 3000 amps of power to jump start just about anything quickly. Powercells are charged by the vehicle's electrical system or by the built in 120 volt AC fully automatic charger. Includes full-power jaw clamps with 26 ft. of 4/0 cable, Activation switch with 30 ft. cord. Capacitor can be re-charged in under one minute for speed and efficiency.
|
|
|
|
|
|
|
|
|
|
1814 OTC 6,000 Ib. Capacity Mobile Lifting Crane Electric/Hydraulic
|
|
|
The OTC 1814 6,000 Ib. capacity retractable leg mobile floor crane equipped with No. 61399* electric / hydraulic (115V) pump with remote motor control. Three boom positions give you capacities of 4,000, 5,000, and 6,000 Ibs. - enough to lift the biggest engines and, in many cases, the transmission right along with the engine. A unique and useful feature is the boom swivel. Fully extended (4,000 Ib. cap.), you can swing the boom a full 3 ft. In the 6,000 Ib. cap. position you can achieve a swing of 26".
|
|
|
|
|
|
|
|
|
|
HW93652 Hein-Werner Automotive 3-Ton Heavy-Duty SUV Service Jack
|
|
|
3-Ton Service Jack features a one piece handle for portability, flanged side plates increase strength and a wider chassis for more stability under a load. The large front wheels and rear casters make for easy maneuvering and also features a cast iron pump base for strength and durability. An In-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear.
|
|
|
|
|
|
|
|
|
|
HW93642 Hein-Werner Automotive 2-Ton Service Jack - Made In The USA
|
|
|
2-Ton Service Jack features a one piece handle for portability, flanged side plates increase strength and a wider chassis for more stability under a load. The large front wheels and rear casters make for easy maneuvering and also features a cast iron pump base for strength and durability. An In-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear.
|
|
|
|
|
|
|
|
|
|
HW93657 Hein-Werner Automotive 4-Ton Manual Hydraulic Service Jack
|
|
|
4-Ton Manual Service Jack features a one piece handle for portability, flanged side plates increase strength and a wider chassis for more stability under a load. The large front wheels and rear casters make for easy maneuvering and also features a cast iron pump base for strength and durability. The power unit features a sealed hydraulic pump for durability and a pressure relief valve which prevents overloading preventing damage to the jack. An In-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear.
|
|
|
|
|
|
|
|
|
|
HW93660 Hein-Werner Automotive 10-Ton Manual Hydraulic Service Jack
|
|
|
The HW93660 Hein-Werner Automotive 10-Ton Manual Hydraulic Service Jack Lifts trucks, trailers, and buses by the axle, differential, or frame. The dual piston action provides speed to contact and power to lift. Long chassis for hard to reach points. Breather plug assembly, U.S. Patent No.7,194,857. Handle adjusts to three pumping positions. T-handle with release knob for exact positioning of load. Large full swivel saddle and ball bearing caster make positioning easy. Cast lift arm for heavy loads. Paired perfect with jack stands HW93512
|
|
|
|
|
|
|
|
|
|
HW93662 Hein-Werner Automotive 10-Ton Air / Manual Hydraulic Service Jack
|
|
|
Add Speed, safety and convenience with the HW93662 Hein-Werner Automotive 10-Ton Air Over Manual Hydraulic Service Jack Lifts trucks, trailers, and buses by the axle, differential, or frame. The dual piston action provides speed to contact and power to lift. Long chassis for hard to reach points. Breather plug assembly, U.S. Patent No.7,194,857. Handle adjusts to three pumping positions. T-handle with release knob for exact positioning of load. Sealed hydraulic unit keeps out grit, grime, and moisture. Large full swivel saddle and ball bearing caster make positioning easy. Cast lift arm for heavy loads. Paired perfect with jack stands HW93512
|
|
|
|
|
|
|
|
|
|
HW93667 Hein-Werner Automotive 4-Ton Air Hydraulic Service Jack
|
|
|
4-Ton Air Over Service Jack features a one piece handle for portability, flanged side plates increase strength and a wider chassis for more stability under a load. The large front wheels and rear casters make for easy maneuvering and also features a cast iron pump base for strength and durability. The power unit features a sealed hydraulic pump for durability and a pressure relief valve which prevents overloading preventing damage to the jack. An In-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear.
|
|
|
|
|
|
|
|
|
|
HW93690 Hein-Werner Automotive 10-Ton End Lift Jack For Trucks & Trailers
|
|
|
Three-way heavy duty brass air valve provides fine control when lifting or lowering a vehicle. Safety latch design provides six different automatic safety lock positions to prevent unintentional lowering of load. Heavy duty wide base for stability and strength. Two front swivel caster wheels and two 12″ diameter semi-pneumatic rear tires provide easy maneuvering. Adjustable lifting arm can be extended to desired position.
|
|
|
|
|
|
|
|
|
|
HW93718 Hein-Werner Automotive 1-Ton Hydraulic Transmission Jack
|
|
|
The HW93718 Hein-Werner Automotive 1-Ton Hydraulic Transmission Jack features a wishbone design allows unit more mobility. Tubular steel frame for rigity. 360° swivel casters make getting around a one man job. Load restraint chains for safety. Use 1/2" drive tools to tilt saddle. Designed for heavy duty transmissions,
|
|
|
|
|
|
|
|
|
|
HW93776 Hein-Werner Automotive 3-Ton Engine Stand
|
|
|
The HW93776 Hein-Werner Automotive 3-Ton Engine Stand can be configured for virtually any large capacity block including Cummins, Mack Diesel, Caterpillar, Detroit, International Diesel, Allison Transmissions and even Small Vehicles. Features include a Clearance in 360° rotation. A Long handle provides easy engine rotation with 95 to 1 gear. Floor lock keeps stand from moving during repairs. Universal adapter included for use with a wide variety of optional adapters
|
|
|
|
|
|
|
|
|
|
HW93300 Hein-Werner 25 Ton Shop Press 6" Stroke With Hydraulic Pump
|
|
|
HW93300 Hein-Werner 25 Ton Shop Press 6" Stroke With Hydraulic Pump
|
|
|
|
|
|
|
|
|
|
HW93301 Hein-Werner 25 Ton Shop Press 6" Stroke With Air-Pump
|
|
|
HW93301 Hein-Werner 25 Ton Shop Press 6" Stroke With Air-Pump. Excellent for bending, bonding or straightening applications. Multi-position bed for work height adjustment. Heavy steel welded construction. Includes hand winch for easy bed adjustments. Ideal for the removal or installation of gears, universal joints, pulleys, wrist pins, and other press jobs. 4″ pressure gauge.
|
|
|
|
|
|
|
|
|
|
HW93400 Hein-Werner 55 Ton Shop Press 6" Stroke With Hydraulic Pump
|
|
|
HW93400 Hein-Werner 55 Ton Shop Press 6" Stroke With Hydraulic Pump
|
|
|
|
|
|
|
|
|
|
HW93401 Hein-Werner 55 Ton Shop Press 6" Stroke With Air-Pump
|
|
|
HW93401 Hein-Werner 55 Ton Shop Press 6" Stroke With Air-Pump
|
|
|
|
|
|
|
|
|
|
HW93402 Hein-Werner 55 Ton Shop Press 6" Stroke With Electric Pump
|
|
|
HW93402 Hein-Werner 55 Ton Shop Press 6" Stroke With Electric Pump
|
|
|
|
|
|
|
|
|
|
HW93403 Hein-Werner 55 Ton Shop Press 13" Stroke With Air-Pump
|
|
|
HW93403 Hein-Werner 55 Ton Shop Press 13" Stroke With Air-Pump
|
|
|
|
|
|
|
|
|
|
HW93404 Hein-Werner 55 Ton Shop Press 13" Stroke With Electric Pump
|
|
|
HW93404 Hein-Werner 55 Ton Shop Press 13" Stroke With Electric Pump
|
|
|
|
|
|
|
|
|
|
HW93405 Hein-Werner 55 Ton Shop Press 13" Stroke Double Acting With Electric Pump
|
|
|
HW93405 Hein-Werner 55 Ton Shop Press 13" Stroke Double Acting With Electric Pump
|
|
|
|
|
|
|
|
|
|
HW93610 Hein-Werner 100 Ton Shop Press With Electric Pump
|
|
|
HW93610 Hein-Werner 100 Ton Shop Press With Electric Pump
|
|
|
|
|
|
|
|
|
|
HW93693 Hein-Werner 10 Ton End Lift (Sold In Pairs Only)
|
|
|
HW93693 Hein-Werner 10 Ton End Lift (Sold In Pairs Only)
|
|
|
|
|
|
|
|
|
|
HW93696A Hein-Werner 2-1/2 Ton End Lift
|
|
|
HW93696A Hein-Werner 2-1/2 Ton End Lift
|
|
|
|
|
|
|
|
|
|
HW93737A Hein-Werner 10 Ton Air Jack
|
|
|
HW93737A Hein-Werner 10 Ton Air Jack
|
|
|
|
|
|
|
|
|
|
HW93806 Hein-Werner 3 Ton Engine Crane
|
|
|
HW93806 Hein-Werner 3 Ton Engine Crane. Roller bearings in wheels for ease of movement. Swivel hook for full rotation of load. Side swivel of boom for ease of positioning load. Pry bar to remove weight from leg to ease movement of leg extension. 3 Boom and leg extension positions. Air operated ram for easy load lifting and control. Equipped air pump operates on standard shop air and has smooth rise, hold, and lowering control.
|
|
|
|
|
|
|
|
|
|
22100C Omega 10 Ton Hydraulic Long Chassis Service Jack
|
|
|
22100C Omega 10 Ton Hydraulic Long Chassis Service Jack Features include a handle actuated release valve which provides metered control at any desired lowering speed. A wide stance and low center of gravity provides optimum stability under load stress. Heavy gauge, steel frame helps prevent distortion and twisting and a built-in by-pass device which protects the hydraulic system from over pumping damage.
|
|
|
|
|
|
|
|
|
|
22101C Omega 10 Ton Hydraulic Air / Manual Long Chassis Service Jack
|
|
|
22101C Omega 10 Ton Hydraulic Air / Manual Long Chassis Service Jack: The wide stance and low center of gravity provide the optimum stability under heavy loads. Heavy gauge steel construction of the frame helps to prevent twisting, warping and distortion. Convenient foot pedal for fast no load lifts and a handle actuated release valve for precise metered control of lowering speed.
|
|
|
|
|
|
|
|
|
|
22201 Omega 20 Ton Hydraulic Air / Manual Service Jack
|
|
|
22201 Omega 20 Ton Hydraulic Air / Manual Service Jack: The wide stance and low center of gravity provide the optimum stability under heavy loads. Heavy gauge steel construction of the frame helps to prevent twisting, warping and distortion. Convenient foot pedal for fast no load lifts and a handle actuated release valve for precise metered control of lowering speed.
|
|
|
|
|
|
|
|
|
|
22203 Omega 20 Ton Hydraulic Air / Manual Service Jack
|
|
|
22203 Omega 20 Ton Hydraulic Air / Manual Service Jack: The wide stance and low center of gravity provide the optimum stability under heavy loads. Heavy gauge steel construction of the frame helps to prevent twisting, warping and distortion. Convenient foot pedal for fast no load lifts and a handle actuated release valve for precise metered control of lowering speed.
|
|
|
|
|
|
|
|
|
|
25107 Omega 10 Ton Hydraulic Magic Lift Service Jack
|
|
|
25107 Omega 10 Ton Hydraulic Magic Lift Service Jack: Magic Lift offers a quicker lift and professional performance through its innovative design and heavy gauge construction with a rugged universal joint release valve. Metered release system allows for precision control of the lift load and the internals are protected with an built in by-pass device from over pumping damage.
|
|
|
|
|
|
|
|
|
|
42001 Omega 1 Ton Air / Manual Telescopic Transmission Jack
|
|
|
42001 Omega 1 Ton Air / Manual Telescopic Transmission Jack: Adjustable head can be tilted forward, backward, and side to side for optimum alignment of transmission bolt pattern and pins. Hydraulic system is protected from internal damage by a patented by-pass mechanism. Load-restraining chain is vital for raising of lowering safety. Four wheel caster allow easy movement, positioning of transmission jack. Rugged steel wheels and full swivel ball bearing casters. User friendly 360° rotating pumping socket for the maximum in directional operation.
|
|
|
|
|
|
|
|
|
|
42003 Omega 1 Ton Telescopic Transmission Jack
|
|
|
42003 Omega 1 Ton Telescopic Transmission Jack: Adjustable head can be tilted forward, backward, and side to side for optimum alignment of transmission bolt pattern and pins. Hydraulic system is protected from internal damage by a patented by-pass mechanism. Load-restraining chain is vital for raising of lowering safety. Four wheel caster allow easy movement, positioning of transmission jack. Rugged steel wheels and full swivel ball bearing casters. User friendly 360° rotating pumping socket for the maximum in directional operation.
|
|
|
|
|
|
|
|
|
|
43000 Omega 1-1/2 Ton Low Profile Transmission Jack
|
|
|
43000 Omega 1-1/2 Ton Low Profile Transmission Jack: Adjustable head can be tilted forward, backward, and side to side for optimum alignment of transmission bolt pattern and pins. Hydraulic system is protected from internal damage by a patented by-pass mechanism. Load-restraining chain is vital for raising of lowering safety. Four wheel caster allow easy movement, positioning of transmission jack. Rugged steel wheels and full swivel ball bearing casters. User friendly 360° rotating pumping socket for the maximum in directional operation.
|
|
|
|
|
|
|
|
|
|
44020 Omega 2 Ton Engine Crane
|
|
|
44020 Omega 2 Ton Engine Crane: Metered control release valve for lowering boom at a precisely controlled rate, special 8 Ton hydraulic long ram is equipped with a patented built in by-pass mechanism to prevent over pumping damage. Heavy duty welded construction with reinforced tube steel.
|
|
|
|
|
|
|
|
|
|
93200 Omega 20 Ton Truck Ramps
|
|
|
93200 Omega 20 Ton Truck Ramps: Designed for heavy-duty tasks with steel wheels and long t-handle for added mobility and durability. Intended for use in pairs only. Never utilize in a manner not intended.
|
|
|
|
|
|
|
|
|
|
93201 Omega 20 Ton Wide Truck Ramps
|
|
|
93201 Omega 20 Ton Wide Truck Ramps: Designed for heavy-duty tasks with steel wheels and long t-handle for added mobility and durability. Intended for use in pairs only. Never utilize in a manner not intended.
|
|
|
|
|
|
|
|
|
|
11-618 Goodall Start-All 12/24 Volt Gasoline Engine Powered 300 Amp Capacity
|
|
|
The GoodAll 11-618 Start-All provides 12 volt, 300 Amps of cranking capability & 24 volt, 180 Amps of cranking capability. Voltage regulation and surge protection with Antizap circuitry protect on-board electronics and provide a safer boost. The on-board polarity indicator, low battery indicator, volt meter, and amp meter give a visual indication that connections are correct and the boost output is within expected limits.
|
|
|
|
|
|
|
|
|
|
10102 Tiger Tool Heavy-Duty Universal Joint Puller
|
|
|
The World's greatest and "original" U-Joint Puller! Engineered for use with up to a one-inch impact wrench, this tool provides the ultimate "brute strength" for disassembling drivelines.
|
|
|
|
|
|
|
|
|
|
10104 Tiger Tool Intermediate U-Joint Puller
|
|
|
U-Joint Puller designed to fit drivelines 1500 series and under, on intermediate trucks, school buses, farm, and light industrial vehicles. Fits u-joints with bearing cups 1.25" to 1.7" O.D. Newly designed to fit Spicer SPL 90 & 100 Series Drivelines. Eliminates dangerous vice and socket or hammering methods. Removes sealed u-joint cups in minutes. Does not damage the driveshaft, yokes, joints, or bearing cups.
|
|
|
|
|
|
|
|
|
|
10217 Tiger Tool SPL Bearing Cup Installer
|
|
|
Installs bearing cups on extended service Dana/Spicer SPL "Life Series" drivelines.
|
|
|
|
|
|
|
|
|
|
10310 Tiger Tool Tie Rod End Remover Set
|
|
|
This set of popular Tie Rod End Removers provide a safe and effective means to “shock” tie rod ends loose without risk of damage to threaded areas, rubber seals, and grease nipples. Included are the tie reod end removers for intermediate-size, heavy-duty and European trucks. With a shipping weight of 3 lbs.
|
|
|
|
|
|
|
|
|
|
10385 Tiger Tool Pitman Arm Puller (Sheppard M100)
|
|
|
Tailored to remove pitman arms from Sheppard M100 gearboxes. Made of high strength cast steel Durable construction withstands use of up to a 3/4" drive impact wrench. Engineered to deliver a high capacity pull. Ease of use, simple slip-on installation for instant results and an adjustable glove opening 2.5" to 4.1" wide.
|
|
|
|
|
|
|
|
|
|
10386 Tiger Tool Pitman Arm Spreader (Heavy-Duty)
|
|
|
The 10386 Universal Pitman Arm Spreader provides for the quick and safe removal of Pitman Arms on 2-ton and larger trucks. The high strength adjustable pulling arms fit various widths of pitman arms for easy installation and removal of the tool. Made of 4140 heat-treated steel, the Pitman Arm Spreader can be used with up to a 1/2" impact wrench. Simply slip it on for instant results. With a shipping weight of 3 lbs.
|
|
|
|
|
|
|
|
|
|
10388 Tiger Tool Intermediate Pitman Arm Puller
|
|
|
Designed for intermediate trucks, school buses, delivery trucks and other vehicles with a nut release Pitman arm. No torching or hammering required with no damage to bearings. Engineered for the toughest jobs with a rugged cast frame with a lifetime warranty and a max glove opening of 3.5 inches. This unit has a shipping weight of 6 lbs.
|
|
|
|
|
|
|
|
|
|
10389 Tiger Tool Pitman Arm Puller - Sheppard M110 Style
|
|
|
Designed to easily remove the most stubborn pitman arms on Sheppard M110 gear boxes. No torching or hammering required with no damage to bearings. May be used with up to a 3/4 inch impact wrench. Made of high strength cast steel for high capacity pull. Simple to slip on for instant results. This unit has a shipping weight of 13 lbs.
|
|
|
|
|
|
|
|
|
|
10406 Tiger Tool Manual Slack Adjuster Puller
|
|
|
This item fits virtually all makes and models of manual type slack adjusters. Made from high strength ADI and steel castings, CNC machined, billet 4140 forcing screws with grade 8 attaching hardware. Eliminates the need for dangerous hammering and cutting torch methods. Designed for high capacity pull. Can be used with up to a 1/2" impact wrench. Simple to slip on for instant results. Unit has a shipping weight of 5 lbs.
|
|
|
|
|
|
|
|
|
|
10407 Tiger Tool Rockwell Slack Adjuster Puller
|
|
|
This puller fits virtually all Rockwell self-adjusting slack adjusters. Made from high strength ADI and steel castings, CNC machined, billet 4140 forcing screws with grade 8 attaching hardware. Eliminates the need for dangerous hammering and cutting torch methods. Designed for high capacity pull. Can be used with up to a 1/2" impact wrench. Simple to slip on for instant results. Unit has a shipping weight of 5 lbs.
|
|
|
|
|
|
|
|
|
|
10409 Tiger Tool Gunite/Brunner/Bendix Slack Adjuster Puller
|
|
|
This puller fits virtually all Gunite, Brunner, and Bendix self-adjusting slack adjusters. Made from high strength ADI and steel castings, CNC machined, billet 4140 forcing screws with grade 8 attaching hardware. Eliminates the need for dangerous hammering and cutting torch methods. Designed for high capacity pull. Can be used with up to a 1/2" impact wrench. Simple to slip on for instant results. Unit has a shipping weight of 8 lbs.
|
|
|
|
|
|
|
|
|
|
10410 Tiger Tool Haldex Slack Adjuster Puller
|
|
|
New and improved design accommodates the removal of virtually all Haldex self-adjusting slack adjusters including, left offset, right offset, and standard elongated arm designs from either side! Made from high strength ADI and steel castings, CNC machined, billet 4140 forcing screws with grade 8 attaching hardware.
|
|
|
|
|
|
|
|
|
|
10608 Tiger Tool Wheel Stud Service Kit
|
|
|
The Wheel Stud Service Kit is completely portable and includes a 10 ton hydraulic cylinder to provide fast and effective removal of even the most stubborn seized studs. This kit also includes a rigid heat treated steel press frame, 4140 chrome-moly steel components, and a convenient carrying case. Eliminates the risk of damage to hubs, seals, wheel bearings, and wheel studs. Removal of the hub is no longer required. Interchangeable adapters for maximum flexibility. Achieving maximum safety from accurate installations.
|
|
|
|
|
|
|
|
|
|
10611 Tiger Tool Manual Wheel Stud Service Kit
|
|
|
The 10611 Manual Wheel Stud Service Kit Pneumatically removes and installs 10 studs in only 10 to 15 minutes. This completely portable kit uses a heat treated forcing screw to provide fast and effective removal of seized studs. Included are a rigid heat treated steel press frame, chrome-moly steel components and a convenient carrying case. (This unit can be upgraded to the 10608 hydraulic system). Hub removal is not required when using this kit.
|
|
|
|
|
|
|
|
|
|
10803 Tiger Tool Heavy Duty Yoke Puller
|
|
|
The Tiger Yoke Puller simplifies and expedites the removal of heavy-duty yokes on driveshafts, transmissions, and rear-end differentials without damage to yokes or other components. Engineered for use with a 1/2" impact wrench. This puller is CNC machined from billet chrome-moly steel, then it is heat treated and finished to provide maximum strength and wear resistance. Engineered and precision machined to provide maximum force. This puller is easily capable of generating 25,000lbs of pulling power.
|
|
|
|
|
|
|
|
|
|
11001 Tiger Tool Axle Shaft Puller
|
|
|
The Tiger Tool Axle-Shaft Puller isn't just another way to strike the axle-shaft, it's a true axle-shaft puller. Any mechanic will tell you that the removal of drive-axles is usually difficult, time consuming, and often dangerous. Works on all medium to heavy-duty Eaton and Rockwell drive axles.
|
|
|
|
|
|
|
|
|
|
15000 Tiger Tool Leaf Spring & Bushing Service Kit (Core Kit Only)
|
|
|
The Pin & Bushing Service Kit removes and installs both rubber isolated and threaded pin bushings from the spring eye and chassis mounts without removing the spring packs from the axle. The hydraulic cylinder creates 20 Tons of pulling power for quiet smooth removal & installation. Components are made from heat treated alloy steels for strength & durability with a black oxide finish that resists corrosion. (Requires 10,000 PSI Hydraulic Power Source.
|
|
|
|
|
|
|
|
|
|
15006 Tiger Tool Kenworth Pin & Bushing # B65-1001 Adapter
|
|
|
The Tiger Tool Kenworth Pin and Bushing #B65-1001 Adapter: This tool is designed for the installation and removal of Kenworth Pin and Bushing # B65-1001. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Pin and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15007 Tiger Tool Kenworth & Peterbilt Pin & Bushing # B65-6005 Adapter
|
|
|
This tool is designed for the installation and removal of Kenworth Pin and Bushing #s B65-6005. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Pin and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15008 Tiger Tool Kenworth Pin & Bushing # B65-1012 Adapter
|
|
|
The Tiger Tool Kenworth Pin and Bushing # B65-1012 Adapter: This tool is designed for the installation and removal of Kenworth Pin and Bushing #s B65-1012. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Pin and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15009 Tiger Tool Kenworth Pin & Bushing # B65-1006 Adapter
|
|
|
The Tiger Tool Kenworth Pin and Bushing # B65-1006 Adapter: This tool is designed for the installation and removal of Kenworth Pin and Bushing #s B65-1006. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Pin and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15010 Tiger Tool Peterbilt #02-01805 & International #1065H, 1680034C1, 44409C1 Adapter
|
|
|
The Tiger Tool Peterbilt #02-01805 & International #1065H, 1680034C1, 44409C1 Adapter: This tool is designed for the installation and removal of Peterbilt pin and bushing # 02-01805, as well as International pin and bushing #s 1065H, 1680034C1, 44409C1. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Pin and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15011 Tiger Tool Kenworth & Peterbilt Pin & Bushing # B65 - 1013 Adapter
|
|
|
The Tiger Tool Kenworth & Peterbilt # B65-1013 Adapter Adapter: This tool is designed for the installation and removal of Kenworth and Peterbilt pin and bushing # B65-1013. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Leaf Spring and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15012 Tiger Tool Peterbilt Air Trac Pin & Bushing Adapter
|
|
|
Tiger Tools Peterbilt Air Trac Pin & Bushing Adapter: This adapter kit (for use with Tiger Tools Part # 15000 - Leaf Spring and Bushing Kit) allows for the easy removal and installation of the Peterbilt Air Trac rear rubber isolated pin and bushing while the suspension remains on the truck. The implementation of this add-on kit will reduce the shop service time on these jobs by as much as 70%. Removal of the spring packs from the axle is no longer required. All components are machined from heat treated alloy steels for strength, durability and extended tool life.
|
|
|
|
|
|
|
|
|
|
15015 Tiger Tool Mack Pin and Bushing #10QK254M2 Adapter
|
|
|
The Mack Pin and Bushing #10QK254M2 Adapter: This tool is designed for the installation and removal of Mack Pin and Bushing # 10QK254M. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Leaf Spring and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15030 Tiger Tool Freightliner Airliner Pin & Bushing Adapter
|
|
|
The Freightliner Airliner Pin & Bushing Adapter: This tool is designed for the installation and removal of Freightliner Airliner Rear Suspension Pins and Bushings. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Leaf Spring and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15031 Tiger Tool Freightliner & Sterling Pin & Bushing #16-14603-000 Adapter
|
|
|
Freightliner & Sterling Pin & Bushing #16-14603-000 Adapter
|
|
|
|
|
|
|
|
|
|
15040 Tiger Tool Hendrickson Intraax Tri-Functional Wide Bushing Adapter
|
|
|
The Hendrickson Intraax Tri-Functional Wide Bushing Adapter: This adapter is designed for the installation and removal of Hendrickson Intraax Tri-Functional Wide Trailer Suspension Bushings. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Leaf Spring and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
15041 Tiger Tool Hendrickson Vantraax Tri-Functional Narrow Bushing Adapter
|
|
|
The Hendrickson Vantraax Tri-Functional Narrow Bushing Adapter: This adapter is designed for the installation and removal of Hendrickson Vantraax Tri-Functional Narrow Trailer Suspension Bushings. It is machined from heat treated alloy steel for strength, durability and extended tool life. Black oxide finish for added corrosion resistance. This item is intended for use with the part number 15000 (Leaf Spring and Bushing Service Kit).
|
|
|
|
|
|
|
|
|
|
20150 Tiger Tool Heavy Duty U-Joint Service Kit
|
|
|
The Heavy-Duty Universal Joint Service Kit comes complete with everything needed to dismantle and assemble virtually all heavy-duty truck universal joints. This kit includes: 10102 Heavy Duty Universal Joint Puller (for 1.50" to 2.20" O.D. bearing cups), 10201 Bearing Cup Installer - Traditional Bolt Retained and 10217 Bearing Cup Installer -SPL 140/ 170/ 250 Series.
|
|
|
|
|
|
|
|
|
|
20201 Tiger Tool Heavy Duty Mechanic's Kit
|
|
|
The Heavy Duty Mechanic Combo Kit comes with a variety of popular tools used for servicing driveline, steering and brake components on class 7 and 8 trucks and buses.
|
|
|
|
|
|
|
|
|
|
20301 Tiger Tool Heavy Duty Mechanic's Kit
|
|
|
The Heavy Duty Mechanic Combo Kit comes with a variety of popular tools used for servicing driveline, steering and brake components on class 7/8 trucks and buses.
|
|
|
|
|
|
|
|
|
|
20387 Tiger Tool Pitman Arm Service Kit
|
|
|
This kit is a must have for any mechanic or shop dervicing steering boxes. The Tiger Tool Pitman Arm Service Kit includes Tiger’s 10385 Sheppard M100 style Gear Box puller and the 10386 Pitman Arm Spreader with “variable adjusting spreader arms” providing easy removal of the most common styles of pitman arms. With a shipping weight of 10lb.
|
|
|
|
|
|
|
|
|
|
20401 Tiger Tool Heavy Duty Mechanic's Kit
|
|
|
The Heavy Duty Mechanic Combo Kit comes with a variety of popular tools used for servicing driveline, steering and brake components on class 7/8 trucks and buses.
|
|
|
|
|
|
|
|
|
|
20602 Tiger Tool Slack Adjuster Service Kit
|
|
|
The Slack Adjuster Service Kit provides specific use slack adjuster pullers custom designed and patented to fit all major brands of Manual and Automatic Self-Adjusting type slack adjusters.
|
|
|
|
|
|
|
|
|
|
70126 Tiger Tool Enerpac XA-11 Hydraulic Pump
|
|
|
Enerpac XA-11 features extremely high oil delivery, precise user control, and ergonomic operation.
|
|
|
|
|
|
|
|
|
|
70127 Tiger Tool Enerpac Turbo ll Hydraulic Pump With Hose & Gauge
|
|
|
Enerpac Turbo ll utilizes exhaust air to help power the pump, developing 10,000 psi hydraulic pressure with only 80 psi air pressure.
|
|
|
|
|
|
|
|
|
|
90150 Tiger Tool Heavy Duty King Pin Press
|
|
|
The new Tiger King Pin Press generates 46,000 Lbs of force and weighs only 30 lbs. At over 75% less weight than our closest competitor, the Tiger King Pin Press provides a much more effective, and user friendly design for ease of use, requiring only one technician to operate. Incorporating the use of a forcing screw, anti-torque arms prevent twisting of the main body while applying extreme forces via an impact wrench. The removal of King Pins can now be done in minutes with relative ease and efficiency. Designed for use on straight and tapered kingpins, and will accommodate sizes from 7/8” to 2 5/32” kingpins. This kit also includes: 10301 7/8" Heavy-Duty Trucks, 10302 3/4" Intermediate Size Trucks and 10304 20mm European Trucks Tie Rod End Removers.
|
|
|
|
|
|
|
|
|
|
37887 Yellow Jacket Hybrid Automatic Refrigerant Management System with 10 Foot Hoses and 3 CFM Vacuum Pump
|
Price $4,399.95 Free Shipping
|
|
|
The RMS 37887 Automatic provides full cycle recovery/recycle/evacuate/recharge to bring the vehicle back to factory specifications. Plus, it's fully compliant with SAE J2788 and J2788H. Now with full color graphic display, advanced user interface and onboard diagnostics, automatic scale calibration, remote troubleshooting and vacuum hold. The RMS 37887 is designed with a unique flush feature and is OEM approved for use with high voltage compressor A/C systems.
|
|
|
|
|
|
|
|
|
|
AC1234-6 Robinair 1234yf Recovery Recycling Recharging Unit
|
Price $6,625.64 FREE Shipping
|
|
|
Due to its environmental impact, R134a, the refrigerant currently used in vehicles around the world, is being phased out. To comply with new U.S. legislation, a new refrigerant, R-1234yf, is being introduced in its place. While it is an efficient refrigerant, R134a is also known to have consequences for global warming. Increasing environmental awareness has led the scientific and industrial community to search for a less harmful alternative. Starting in 2012, a range of vehicles with air conditioning systems running on the new R-1234yf gas will enter the U.S. market. however, the great majority of vehicles on the roads will still be using the older R-134a refrigerant – and these will continue to require servicing for the next 15 years or so.
|
|
|
|
|
|
|
|
|
|
6522 OTC Tools Leak Tamer EVAP Testing System
|
|
|
OTC 6522 EVAP Leak Detection System - With the 6522 OTC Tools Leak Tamer EVAP Testing System, its easy to Find the Leak, Clear the Code, Smoke the Test. Put better technology and portability in your shop with OTC's new and improved smoke machine. This unit is half the size of its predecessor, but twice as mighty with more powerful features. Ultraviolet fluorescent dye fingerprints the exact location of a leak.
|
|
|
|
|
|
|
|
|
|
01-090 Goodall GPC 1090 Generator 4000 watt Air Compressor 16.3 cfm
|
|
|
The Goodall GPC 1090 4,000 watt Generator / 16.3 cfm Air Compressor has a Subaru OHC engine with 1.85 gal fuel capacity, providing up to 4000 watts and capable of providing up to 16.3 cfm at 100 psi with a 30 gal air tank.
|
|
|
|
|
|
|
|
|
|
|
01-095 Goodall GPC 1095 Generator 10000 watt Air Compressor 16.3 cfm
|
|
|
The Goodall GPC 1095 10,000 watt Generator / 16.3 cfm Air Compressor has a Kohler OHV V-Twin engine with electric start and a 5 gal fuel capacity, providing up to 10,000 watts and capable of providing up to 16.3 cfm at 100 psi with a 30 gal air tank.
|
|
|
|
|
|
|
|
|
|
|
01-095-B Goodall GPC 1095 Generator 10000 watt Air Compressor 16.3 cfm
|
|
|
The Goodall GPC 1095 10,000 watt Generator / 16.3 cfm Air Compressor has a Kohler OHV V-Twin engine with electric start and a 5 gal fuel capacity, providing up to 10,000 watts and capable of providing up to 16.3 cfm at 100 psi. This unit comes with a base mount and no air tank.
|
|
|
|
|
|
|
|
|
|
|
01-098 Goodall GPC 1098 Generator 10000 watt Air Compressor 29 cfm
|
|
|
The Goodall GPC 1098 10,000 watt Generator / 29 cfm Air Compressor has a Kohler OHV V-Twin engine with electric start and a 5 gal fuel capacity, providing up to 10,000 watts and capable of providing up to 29 cfm at 100 psi with a 30 gal air tank.
|
|
|
|
|
|
|
|
|
|
01-105 Goodall GPC 1105 Welder 170 amp Generator 4000 watt Air Compressor 16.3 cfm
|
|
|
The Goodall® GPC 1105 170 amp Welder / 4000 watt Generator / 16.3 cfm Air Compressor has a Subaru OHC engine with electric start and a 1.85 gal fuel capacity, allowing DC stick welding with up to 170 amps, providing up to 4,000 watts of AC power and capable of providing up to 16.3 cfm at 100 psi with a 30 gal air tank.
|
|
|
|
|
|
|
|
|
|
|
01-150 Goodall GPC 1150 Welder 240 amp Generator 6000 watt Air Compressor 29 cfm
|
|
|
The Goodall® GPC 1150 240 amp Welder / 6,000 watt Generator / 29 cfm Air Compressor has the same design, but more power than the 1100. Sporting a powerful 25 HP Kohler Engine, 250 amp DC stick welder and a 29 cfm 2 stage compressor, this unit is perfect for ag, construction, municipal or repair applications. Easy bolt down installation.
|
|
|
|
|
|
|
|
|
|
|
01-150-B Goodall GPC 1150 Welder 240 amp Generator 6000 watt Air Compressor 29 cfm base mount
|
|
|
The Goodall® GPC 1150 240 amp Welder / 6,000 watt Generator / 29 cfm Air Compressor has the same design, but more power than the 1100. Sporting a powerful 25 HP Kohler Engine, 250 amp DC stick welder and a 29 cfm 2 stage compressor, this unit is perfect for ag, construction, municipal or repair applications. Easy bolt down installation. Base Mount model No Air Tank is included.
|
|
|
|
|
|
|
|
|
|
02-500 Goodall GPC2500 Hydraulic Powered Welder 250 amp Generator 5000 watt Air Compressor 24 cfm
|
|
|
The Goodall GPC 2500 Hydraulic Powered 250 amp Welder / 5000 watt Generator / 24 cfm Air Compressor allows you to DC stick weld with up to 250 amps and has a 60% duty cycle at 225 amps (welding cables are included), and can provide up to 6,000 watts at 60 Hz (when not welding) with it's synchronous, brushless AC generator. Additionally there is a two stage air compressor providing up to 24 cfm at 100 psi wiht a maximum of 150 psi, simple bolt in packages allow for compact, easy installation taking less time.
|
|
|
|
|
|
|
|
|
|
11-601 Goodall Start-All 12 Volt Gasoline Engine Powered 300 Amp Capacity
|
|
|
The Goodall® Start•All® 12 volt 300 amp jump starter is the perfect choice for the occasional user. This unit will do what the larger units do; however, for larger vehicles, cables must be connected to the vehicle for a longer period of time.
|
|
|
|
|
|
|
|
|
|
11-625M Goodall Start-All 700 amp 12/24 volt w/ 24 volt NATO Plug
|
|
|
The Goodall® Start•All® M Series are military tough and come equipped with NATO plug additionally with powerful 12/24 volt jump starting. Tough enough to crank off-road construction equipment, transit buses, or military vehicles even in frigid temps. Powered by a Briggs & Stratton Vanguard OHV engine with a two gallon capacity. 30 foot cables made from 1/0 welding cable to making them more flexible and easier to use. All models have jump start and others have either AC generator or air compressor capabilities too.
|
|
|
|
|
|
|
|
|
|
11-626M Goodall Start-All 700 amp 12/24 volt w/ 2000 watt 120V AC w/ 24 volt NATO Plug
|
|
|
The Goodall® Start•All® M Series are military tough and come equipped with NATO plug additionally with powerful 12/24 volt jump starting. Tough enough to crank off-road construction equipment, transit buses, or military vehicles even in frigid temps. Powered by a Briggs & Stratton Vanguard OHV engine with a two gallon capacity. 30 foot cables made from 1/0 welding cable to making them more flexible and easier to use. All models have jump start and others have either AC generator or air compressor capabilities too.
|
|
|
|
|
|
|
|
|
|
11-627M Goodall Start-All 700 amp 12/24 volt w/ 18 cfm Air Compressor w/ 24 volt NATO Plug
|
|
|
The Goodall® Start•All® M Series are military tough and come equipped with NATO plug additionally with powerful 12/24 volt jump starting. Tough enough to crank off-road construction equipment, transit buses, or military vehicles even in frigid temps. Powered by a Briggs & Stratton Vanguard OHV engine with a two gallon capacity. 30 foot cables made from 1/0 welding cable to making them more flexible and easier to use. All models have jump start and others have either AC generator or air compressor capabilities too.
|
|
|
|
|
|
|
|
|
|
13-213 Goodall Boost-All 12 volt US Charger
|
|
|
Portable, fast and powerful jump starting. Goodall's "easy on the pocket" jump starting solution. Economical without skimping on quality, these units offer 12 or 12/24 volt battery powered jump starting. Narrow 20" width makes transporting between rows of parked vehicles a snap. Narrow 20" width to easily fit between parked vehicles.
|
|
|
|
|
|
|
|
|
|
|
13-214 Goodall Boost-All 12/24 volt US Charger
|
|
|
Portable, fast and powerful jump starting. Goodall's "easy on the pocket" jump starting solution. Economical without skimping on quality, these units offer 12 or 12/24 volt battery powered jump starting. Narrow 20" width makes transporting between rows of parked vehicles a snap. Narrow 20" width to easily fit between parked vehicles.
|
|
|
|
|
|
|
|
|
|
|
13-223 Goodall Boost-All 12 volt Heavy Duty US Charger
|
|
|
Portable, fast and powerful jump starting. Goodall's "easy on the pocket" jump starting solution. Economical without skimping on quality, these units offer 12 or 12/24 volt battery powered jump starting. Narrow 20" width makes transporting between rows of parked vehicles a snap. Narrow 20" width to easily fit between parked vehicles.
|
|
|
|
|
|
|
|
|
|
13-223C Goodall Boost-All 12 Volt Canadian Charger
|
|
|
Portable, fast and powerful jump starting. Goodall's "easy on the pocket" jump starting solution. Economical without skimping on quality, these units offer 12 or 12/24 volt battery powered jump starting. Narrow 20" width makes transporting between rows of parked vehicles a snap. Narrow 20" width to easily fit between parked vehicles.
|
|
|
|
|
|
|
|
|
|
13-224 Goodall Boost-All 12/24 volt Heavy Duty US Charger
|
|
|
Portable, fast and powerful jump starting. Goodall's "easy on the pocket" jump starting solution. Economical without skimping on quality, these units offer 12 or 12/24 volt battery powered jump starting. Narrow 20" width makes transporting between rows of parked vehicles a snap. Narrow 20" width to easily fit between parked vehicles.
|
|
|
|
|
|
|
|
|
|
13-224C Goodall Boost-All 12/24 volt Canadian Charger
|
|
|
Portable, fast and powerful jump starting. Goodall's "easy on the pocket" jump starting solution. Economical without skimping on quality, these units offer 12 or 12/24 volt battery powered jump starting. Narrow 20" width makes transporting between rows of parked vehicles a snap. Narrow 20" width to easily fit between parked vehicles.
|
|
|
|
|
|
|
|
|
|
13-430 Goodall Super Boost-All Kit 2 ga. Battery Box Battery Isolator
|
|
|
A safe and convenient jump starting solution. Designed to be mounted on your service vehicle with either 2 or 4 auxiliary jump starting batteries, you can now jump start either 12 or 24 volt vehicles. Auxiliary batteries are charged from the service vehicle’s electrical system by using the internally mounted battery separator. Available as kit which includes Super Boost All control box, auxiliary batteries mounted in a battery box and interconnect cables.
|
|
|
|
|
|
|
|
|
|
13-434 Goodall Super Boost-All Kit 1/0 ga. Battery Box Battery Isolator
|
|
|
A safe and convenient jump starting solution. Designed to be mounted on your service vehicle with either 2 or 4 auxiliary jump starting batteries, you can now jump start either 12 or 24 volt vehicles. Auxiliary batteries are charged from the service vehicle’s electrical system by using the internally mounted battery separator. Available as kit which includes Super Boost All control box, auxiliary batteries mounted in a battery box and interconnect cables.
|
|
|
|
|
|
|
|
|
|
13-435 Goodall Super Boost-All Kit 2/0 ga. Battery Box Battery Isolator
|
|
|
A safe and convenient jump starting solution. Designed to be mounted on your service vehicle with either 2 or 4 auxiliary jump starting batteries, you can now jump start either 12 or 24 volt vehicles. Auxiliary batteries are charged from the service vehicle’s electrical system by using the internally mounted battery separator. Available as kit which includes Super Boost All control box, auxiliary batteries mounted in a battery box and interconnect cables.
|
|
|
|
|
|
|
|
|
|
62-160 Goodall 3.4 gallon 4000 psi Belt Drive Cold Water Pressure Washer Subaru
|
|
|
The Goodall® 62-160 Cold Water Gasoline Belt Drive Pressure Washer features a Subaru 404cc OHC, 4000 psi, 3.4 gallons per minute, quick connect nozzles, 50' 3/8" non-marking hose with quick connects, swivel and bend restrictors, professional-grade insulated trigger gun, 48" lance, 3 yr Subaru engine warranty, 7 yr pump warranty.
|
|
|
|
|
|
|
|
|
|
62-200 Goodall 3.3 gallon 3500 psi Hot Water Pressure Washer Subaru
|
|
|
The Goodall® 62-200 Hot Water Gasoline Direct Drive Pressure Washer features a Subaru 404cc OHC, 1.7 gallon fuel tank, 3500 psi, 3.3 gallons per minute, quick connect nozzles, 50' 3/8" non-marking hose with quick connects, swivel and bend restrictors, professional-grade insulated trigger gun, 48" lance, 3 yr Subaru engine warranty, 7 yr pump warranty.
|
|
|
|
|
|
|
|
|
|
65-215 Goodall 17.2 cfm 2 stage 20 gallon Honda
|
|
|
The Goodall® two stage air compressor provides a reliable air source in commercial, industrial, and automotive applications. More efficient than their single stage counterparts, these models compress air to a higher pressure while generating less heat, reducing wear and extending compressor life.
|
|
|
|
|
|
|
|
|
|
65-400 Goodall 29 cfm 2 stage Base Mount Subaru
|
|
|
The Goodall® two stage air compressor provides a reliable air source in commercial, industrial, and automotive applications. More efficient than their single stage counterparts, these models compress air to a higher pressure while generating less heat, reducing wear and extending compressor life.
|
|
|
|
|
|
|
|
|
|
65-410 Goodall 29 cfm 2 stage 30 gallon Subaru
|
|
|
The Goodall® two stage air compressor provides a reliable air source in commercial, industrial, and automotive applications. More efficient than their single stage counterparts, these models compress air to a higher pressure while generating less heat, reducing wear and extending compressor life.
|
|
|
|
|
|
|
|
|
|
67-310D Goodall 6000 watt Generator Diesel
|
|
|
The Goodall® 67-310D Generator 6000 Watt Diesel, are built to work; you’ll want one on every job site. Its heavy duty full wrap frame and impact resistant corners minimizes damage from rough handling. A performance proven engine makes it reliable and efficient, so you’ll use it for many years.
|
|
|
|
|
|
|
|
|
|
VCX-1 RTI Vacuum Coolant Exchanger Two Tube Design 470-80019-00
|
|
|
Coolant / Antifreeze exchange service has never been this easy! Vacuum coolant from the radiator and charge new coolant back. Color-Match Control System eliminates guesswork! Just turn the valves to the same color as the desired function.
|
|
|
|
|
|
|
|
|
|
VCX-4 RTI Vacuum Coolant Exchanger Four Tube Design 470-80020-00
|
|
|
The VCX-4 Vacuum Coolant Exchanger allows you to vacuum the coolant from the radiator and power charge new coolant back in one easy function with out any cumbersome hose connections or time consuming operations. Our New Color-Match Control System eliminates guesswork! Just turn the valves to the same color as the desired function. Removes up to 80% of the coolant in a single pass.
|
|
|
|
|
|
|
|
|
|
1205 OTC Wet-Type Sleeve Puller (Only)
|
|
|
Wet-Type Sleeve Puller (Only) - This tool will remove cylinder sleeves faster than ordinary pullers because it requires very little setup time. Cone adjustment positions the puller jaws quickly, locking bar is tightened. To aid in breaking “frozen” sleeves loose, adjustable bridge is positioned on the cylinder block and the bearing-mounted forcing nut is tightened.
|
|
|
|
|
|
|
|
|
|
1507B OTC 5 Ton Air Assist Service Jack
|
|
|
Bring the versatility of air-assist operation to your shop’s lifting tasks. Huge front wheels mounted in bearings provide trouble-free service life. Rugged steel frame members. Rear swivel casters make spotting the jack easy. Spring-loaded handle may be locked in three positions, from horizontal to vertical.
|
|
|
|
|
|
|
|
|
|
1511B OTC Tools 10-Ton Air/Hydraulic Service Jack
|
|
|
10 Ton Air Assist Service Jack - Bring the versatility of air-assist operation to your shop’s lifting tasks. Huge front wheels mounted in bearings provide trouble-free service life. Rugged steel frame members. Rear swivel casters make spotting the jack easy. Spring-loaded handle may be locked in three positions, from horizontal to vertical.
|
|
|
|
|
|
|
|
|
|
1512 OTC 20 Ton Stinger Service Jack
|
|
|
OTC 1512 20 Ton Stinger Service Jack - Low-profile stance and extended height add to versatility. Huge metal wheels and swivel casters roll effortlessly on internal bearings.
|
|
|
|
|
|
|
|
|
|
1540 OTC 4-Ton Forklift Jack
|
|
|
OTC 1540 4-Ton Forklift Jack - 8,000 lb. capacity with a low starting height of 2-5/8". Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces.
|
|
|
|
|
|
|
|
|
|
1595 OTC Power Train Lift 2,500 Lb
|
|
|
OTC 1595 2,500 lb Capacity Power Train Lift - This lift will handle engine and transmission assemblies, gas tanks, drive axle assemblies, engine / transaxle assemblies, electric bus batteries, and more. Scissors-type design allows access to all four sides of a component.
|
|
|
|
|
|
|
|
|
|
1676 OTC Strong Box Puller Set
|
|
|
OTC 1676 Strong Box Puller Set - Here's a set of pullers that gives you almost unheard of versatility. You get eight pullers, five attachments, and extra puller jaws. They enable you to pull gears, bearings, pulleys, wheels, and more on cars and light trucks.
|
|
|
|
|
|
|
|
|
|
1689 OTC 30 Ton Hydraulic Puller Set
|
|
|
OTC 1689 30-Ton Capacity Hydraulic Puller Set - This puller set gives you the versatility you want and the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors, power shovels, road building machinery, etc. Maintenance operations involving the removal and replacement of gears, bearings, wheels, and other press-fit parts can be done with ease.
|
|
|
|
|
|
|
|
|
|
1735B OTC 2,000 lb. Capacity Heavy-Duty Motor-Rotor Repair Stand
|
|
|
Handles a wide variety of engines, transmissions, torque converters, and rear axles from trucks, tractors, and construction machinery. The 50:1 ratio gearbox allows full rotation of mounted unit with just a turn of the crank and locks in position. Easily maneuvered when loaded To ensure engine stability in all positions, this repair stand is equipped with a positive-crank handle locking mechanism. Twin-post design, featuring laterally adjustable, 3-position outboard support; provides an extremely stable work-holding unit. Locking rear wheels anchor stand in position.
|
|
|
|
|
|
|
|
|
|
1769A OTC Stinger Dual Wheel Dolly (Replaces 1769)
|
|
|
OTC 1769A Stinger Dual Wheel Dolly (Replaces 1769) - This 1,500 capacity dolly will remove, transport, and replace dual wheel and tire assemblies without strain or struggle. Swivel casters, 3-1/2" front and 3" rear, provide easy maneuverability.
|
|
|
|
|
|
|
|
|
|
1806 OTC 4000 Lb. Load-Rotor Sling
|
|
|
OTC 1806 4,000 lb Capacity Load-Rotor® Sling - Use with a crane or hoist. Engine, transmission, or other component is tilted or leveled by turning sling's 5/8" hex drive end with a common speed handle and socket. Makes engine removal and installation a snap, even in close quarters. Has 65-3/4" long chain (5/16") and hook assembly with forged swiveling hook on each end. Pair of special mounting brackets included.
|
|
|
|
|
|
|
|
|
|
1812 OTC 6000 Lb. Load Tilter
|
|
|
OTC 1812 Load Leveler - Improved design over conventional spreader bars. Carriage on main support beam moved by turning lead screw; this permits fine adjustment of the tilt angle of component being lifted. Turn lead screw manually or with air-powered tools.
|
|
|
|
|
|
|
|
|
|
1821 OTC Oil Filter Crusher Air Powered
|
|
|
OTC 1821 10-Ton Air Operated Oil Filter Crusher - Crushes up to four automotive filters at one time, in just 20 seconds. 100% air operation eliminates electrical connections. The generous size crushing chamber (9" high) easily accommodates the largest automotive spin-on filters on the market.
|
|
|
|
|
|
|
|
|
|
1822 OTC 10,000 Lb. Load Rotor
|
|
|
OTC 1822 10,000 lb Capacity Load-Rotor® Load Leveler
|
|
|
|
|
|
|
|
|
|
205059 OTC Mounting Plate For Cummins Engine
|
|
|
OTC 205059 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Cummins engines: All NH, NTC, NTE, N14 855 series in-line 6 cyl.; 378 series V6; 504, 555, and 903 series V8; KT 1150 series in-line 6 cyl., L10. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
205060 OTC Mounting Plate For Cat Engine
|
|
|
OTC 205060 Caterpillar Engine Adapter Mounting Plate - Caterpillar Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Caterpillar engines: Nos. 1673, 1674, 1693, 3306, and 3406 in-line 6 cyl.; Nos. 1100, 3208, 3408 V8 and 3406E. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
218504 OTC Engine Mounting Plate
|
|
|
OTC 218504 Detroit Diesel Engine Adapter Mounting Plate - Detroit Diesel Engine Adapter Mounting Plates for 1750A and 1750 diesel engine stands. No. 218504 – For Detroit series 60 in-line 6-cylinder engines. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
27795 OTC 3 1/16" - 4 1/2" Bushing
|
|
|
3 1/16" - 4 1/2" Bushing
|
|
|
|
|
|
|
|
|
|
3829 OTC Otc J2534 Reprogramming Kit
|
|
|
OTC 3829 J2534 Reprogramming Tool - Have you ever spent hours of labor chasing driveability issues only to find out that there was a software update available for the vehicle's computer? Yesterday's shops only needed to address diagnostics. Today's shops must also incorporate reprogramming.
|
|
|
|
|
|
|
|
|
|
3833B13 OTC 2013 Tpm Base Kit W/Mag & Qr Cd
|
|
|
OTC 3833B13 2013 Tire Pressure Monitor Base Kit - Automatically Selects the Proper Sensor Communication. Activate sensors before tire service is performed, when tires are rotated, and when there is a problem with TPMS.
|
|
|
|
|
|
|
|
|
|
3833M13 OTC 2013 TPM Master Kit W/Mag & Qr Cd
|
|
|
OTC 3833M13 2013 Tire Pressure Monitor Master Kit - Automatically Selects the Proper Sensor Communication. Activate sensors before tire service is performed, when tires are rotated, and when there is a problem with TPMS.
|
|
|
|
|
|
|
|
|
|
3834EZ OTC Tire Pressure Monitoring System Reset Tool With Ez-Sensor Programming
|
|
|
OTC 3834EZ Tire Pressure Monitoring System Reset Tool with EZ-sensor™ Programming - "EZ-sensor™ PROGRAMMABLE TPMS is the first Programmable Tire Pressure Monitoring Sensor which has been designed with the goal of replacing 90% of the TPMS sensors currently stocked by the dealer".
|
|
|
|
|
|
|
|
|
|
3835 OTC Master TPR TPMS Service Kit
|
|
|
OTC 3835 Tire Pressure Monitoring System Reset Tool Master Kit - The TPR is a fast and simple to use stand alone TPMS activation tool. Combine TPR activation with the power of Genisys® scan to broaden your shop's ability to better service your customers vehicles.
|
|
|
|
|
|
|
|
|
|
3857 OTC Tech-Scope 2-Channel Pc Scope
|
|
|
OTC 3857 Tech-Scope - The OTC Tech-Scope™ is a standalone two-channel high-speed lab and ignition oscilloscope with multimeter that allows service technicians to quickly and efficiently test and measure virtually all of the electrical and electronic components and circuits in a modern vehicle. The tool features galvanic isolation not found on automotive scopes for hardware protection and includes an ignition scope and a digital multimeter with an Mohm meter.
|
|
|
|
|
|
|
|
|
|
3875 OTC Genisys Evo® Usa 2011 Obdii Kit
|
|
|
Genisys Evo® Usa 2011 Obdii Kit
|
|
|
|
|
|
|
|
|
|
4021 OTC Air/Hydraulic. Pump W/Remote Control
|
|
|
OTC 4021 Air / Hydraulic Pump with Remote Control - With shop air as the energy source, these pumps have the power and oil capacity (80 cu. in. usable oil) to drive even the large 55-ton rams. They are ideal all-around power sources for dozens of body, frame, and alignment applications.
|
|
|
|
|
|
|
|
|
|
4022 OTC Super Air Pump W/2 Gal. Reservoir
|
|
|
With shop air as the energy source, these pumps have the power and oil capacity (80 cu. in. usable oil) to drive even the large 55-ton rams. They are ideal all-around power sources for dozens of body, frame, and alignment applications. They can be used with a variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI.
|
|
|
|
|
|
|
|
|
|
4200 OTC Nozzle Tester "Nozlrater"
|
|
|
OTC 4200 Nozlrater Diesel Injector Nozzle Tester - Here is the ultimate tool for diagnosing a number of problems that affect diesel fuel injector nozzles. The Nozlrater tester enables you to check for leakage, pop-off pressure, spray pattern, and chatter.
|
|
|
|
|
|
|
|
|
|
4241 OTC 30-Ton King Pin Pusher
|
|
|
OTC 4241 30-Ton King Pin/Brake Anchor Pin Pusher - This is a king- and anchor-pin pusher with anchor pin adapter without hydraulics.
|
|
|
|
|
|
|
|
|
|
4244 OTC Rear Suspension Bushing Tool
|
|
|
OTC 4244 Rear Suspension Bushing Tool - Cut service time dramatically with this tool, at it removes single-wrapped FAS II Airliner Freightliner Rear Suspension bushings in a fraction of the time of traditional methods. Handles Neway AD Series Truck and Tractor suspension bushings. Saves on average 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing. 15-ton capacity cylinder.
|
|
|
|
|
|
|
|
|
|
4245 OTC Freightliner Rear Bushing Master Set
|
|
|
OTC 4245 Rear Suspension Bushing Tool Master Kit - Cut service time dramatically with this tool, at it removes single-wrapped FAS II Airliner Freightliner Rear Suspension bushings in a fraction of the time of traditional methods. Handles Neway AD Series Truck and Tractor suspension bushings. Saves on average 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing. 15-ton capacity cylinder and an OTC 2510A air / hydraulic pump.
|
|
|
|
|
|
|
|
|
|
5015A OTC Clutch Handler
|
|
|
OTC 5015A Truck Clutch / Flywheel Handler - Used for replacing 14" and 15-1/2" clutch assemblies. With features like; a lifting range of 9" to 37", swivel casters provide easy maneuverability and it carries a Lifetime Marathon Warranty®.
|
|
|
|
|
|
|
|
|
|
5018A OTC Clutch Handler
|
|
|
OTC 5018A Truck Clutch & Flywheel Handler - This unit is capable of handling 14" and 15-1/2" clutch assemblies weighing up to 250 lbs. With features like swivel casters, a 360º swivel head and splined shaft with a pilot to aid alignment.
|
|
|
|
|
|
|
|
|
|
5019A OTC Low Lift Transmission Jack
|
|
|
OTC 5019A 2,200 lb. Capacity Low-Lift Transmission Jack - This jack is ideal for working on aerodynamic truck with minimal ground clearance due to its 8-1/4" collapsed height. With features like a fast acting pump to quickly raise the lifting arm, swiveling pump handle and an angle adjustable mounting plate.
|
|
|
|
|
|
|
|
|
|
5020 OTC Diesel Compression Tester W/Adapters
|
|
|
OTC 5020 Diesel Compression Tester with Adapters - Easy-to-use compression tester is designed specifically for medium-duty diesel engines equipped with glow plugs. Dual reading gauge measures compression to 1000 psi and 7000 kPa. Gauge has a push-button release valve and quick disconnect fittings on the hose end. Tester comes with all the necessary glow plug and nozzle adapters in a handy storage case.
|
|
|
|
|
|
|
|
|
|
5079 OTC Power Steering System Analyzer
|
|
|
OTC 5079 Heavy-Duty Power Steering System Analyzer - There is only one way to troubleshoot problem components in a heavy-duty power steering system: a flow and pressure reading meter. OTC’s new OTC 5079 measures both: 1 to 10 gallons oil flow and up to 3,000 psi of pressure.
|
|
|
|
|
|
|
|
|
|
5097 OTC Transfer Tanker W/Pneumatic Pump
|
|
|
OTC 5097 Low Profile Transfer Tanker - OTC now offers a low-profile version of its popular Transfer Tanker, with an air pump.
|
|
|
|
|
|
|
|
|
|
5110 OTC 10 Ton Air Hydraulic Floor Service Jack
|
|
|
OTC 5110 10-ton Capacity Air / Hydraulic Service Jack
|
|
|
|
|
|
|
|
|
|
5180 OTC Portable Multi-Purpose C-Frame Press
|
|
|
OTC 5180 10-Ton Capacity Portable Multipurpose Press
|
|
|
|
|
|
|
|
|
|
5200 OTC Ultra-Low Profile 2-Ton Service Jack
|
|
|
OTC 5200 2-Ton Service Jack Ultra-Low Profile - Introducing the OTC 5200 Ultra-Low Profile 2-Ton Service Jack – the perfect jack for high performance shops.
|
|
|
|
|
|
|
|
|
|
5230 OTC 16.5 Ton Bench Press
|
|
|
OTC 5230 16-1/2 ton Capacity Bench Press - This innovative press integrates all the hydraulic elements within the chassis. The compact and functional design saves workshop space and ensures protection during transport.
|
|
|
|
|
|
|
|
|
|
5237 OTC High Lift Transmission Jack 1,000 Lb Capacity
|
|
|
High Lift Transmission Jack 1,000 Lb Capacity - With a universal mounting head for a wide fore and aft tilt range. Two-stage hydraulic cylinder design. Innovative folding foot pedal and release provides precise control when positioning or removing a transmission. Reduces force required to lift extremely heavy transmissions. ANSI / PALD compliant.
|
|
|
|
|
|
|
|
|
|
5280 OTC Diesel Particulate Filter Cleaner (DPF)
|
|
|
OTC 5280 Diesel Particulate Filter (DPF) Cleaner - The Diesel Particulate Filter (DPF) Cleaner was designed with shop service in mind. The cleaning process allows the DPF to be cleaned as part of a general maintenance schedule at the service location with minimal time away from the vehicle. Its portability allows the unit to be placed as close to the vehicle as possible and to be stored wherever needed in the service facility.
|
|
|
|
|
|
|
|
|
|
5281 OTC Diesel Particulate Filter Thermal Processing Unit (DPF TPU)
|
|
|
OTC 5281 OTC DPF Thermal Processing Unit - The 5281 DPF Thermal Processing Unit is a device which will thermally regenerate a DPF unit at a controlled, pre-programmed rate. Sometimes, the DPF cannot be regenerated on the truck due to a failure with the vehicle's own regeneration system, or in the case of retrofit applications, a lack of an on-vehicle regeneration system. Thermal regeneration of DPFs is used in conjunction with the OTC 5280 DPF Cleaner, and maximizes the cleaning efficiency of the cleaner.
|
|
|
|
|
|
|
|
|
|
5286 OTC Portable DPF Cleaner
|
|
|
OTC 5286 - OTC Portable Diesel Particulate Filter Cleaner - The Diesel Particulate Filter (DPF) Cleaner was designed with shop service in mind. Its portability allows the unit to be placed as close to the vehicle as possible and to be stored wherever needed in the service facility. The advent of the 2010 Tier 4 cleaning requirements created the need for a lighter, more portable cleaning system which can be taken into the field to clean filters at the point of service.
|
|
|
|
|
|
|
|
|
|
61405 OTC Cummins L-10 Engine Mounting Plate
|
|
|
OTC 61405 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands.
|
|
|
|
|
|
|
|
|
|
6529 OTC Car Ball Joint Master Service Set
|
|
|
OTC 6529 Ball Joint Service Kit (Cars) - The 6529 Car Ball Joint Master Service Kit is the first of it’s kind on the market! Stop searching for make-shift solutions for those car applications - everything required is laid out in this complete 50+ piece set. Information at your fingertips – the comprehensive manual includes diagrams with instructions - eliminating guesswork of which adapters are required.
|
|
|
|
|
|
|
|
|
|
6539 OTC Truck/Van/Suv Ball Joint Master Service Set
|
|
|
OTC 6539 Ball Joint Service Kit (Trucks) - The 6539 Truck/Van/SUV Ball Joint Master Service Kit is the most comprehensive and complete kit available on the market! This 55+ piece kit covers pressin ball joints on the following Truck/Van/ SUV applications;
|
|
|
|
|
|
|
|
|
|
6559 OTC Ball Joint Master Service Set
|
|
|
OTC 6559 Ball Joint Master Service Set - The 6559 Ball Joint Master Service Kit offers complete coverage of Car and Truck/Van/SUV applications. With 70+ adapters, c-frame and application guide means there is nothing else to add for servicing ball joints.
|
|
|
|
|
|
|
|
|
|
6575H OTC Hydraulic Hub Grappler™ Kit
|
|
|
OTC 6575-H Hydraulic Hub Grappler™ Kit - An economical way to increase the performance and speed of wheel bearing and hub service.
|
|
|
|
|
|
|
|
|
|
7379 OTC Torque Wrench 100-600 Lb-Ft
|
|
|
OTC 7379 Accutorq™ Clikker 3/4" Torque Wrench - 100-600 ft. lbs. Accutorq™ Clikker torque wrench with 1/2" drive.
|
|
|
|
|
|
|
|
|
|
7641 OTC 36" Adjustable Wrench
|
|
|
OTC 7641 36" Adjustable Wrench
|
|
|
|
|
|
|
|
|
|
9500 OTC Valve
|
|
|
OTC 9500 3-Position, 4-Way Control Valve - This is a 3-position / 4-way lever operated, detent positioned valve for use with double-acting rams. Three positions are; Advance, Neutral and Return. Cylinder ports are blocked when in Neutral position, and pump flow is directed back to the reservoir.
|
|
|
|
|
|
|
|
|
|
9814 OTC Pinion Locknut Socket
|
|
|
Pinion Locknut Socket
|
|
|
|
|
|
|
|
|
|
692021 NEXIQ Technologies Pocket iQ™
|
|
|
The Pocket iQ ABS product family provides brake coverage for a wide range of applications, making the Pocket iQ the industry scan tool of choice for heavy-duty brake diagnostics. With the introduction of the ABS Suite, the Pocket iQ is now a full-service brake scan tool, providing connectivity to tractors and trailers utilizing the SAE J1587 communication protocol. The Complete ABS Kit also comes with a new J560 PLC seven way adapter (available separately) that allows direct connection to a trailer without the tractor. With access to a broad array of special tests, technicians can quickly and easily obtain a reliable and accurate diagnosis of brake status.
|
|
|
|
|
|
|
|
|
|
NEX6IA02 PCL Air Technology NEXUS N6 Inflator
|
|
|
NEX6IA02 PCL Air Technology NEXUS N6 Inflator - PCL's NEXUS Generator and built-in inflators - combining the latest in high performance nitrogen generation with leading inflation technology for up to 4 tires at once. PCL’s brand new range of Nitrogen products branded ‘NEXUS’ – meaning ‘the most central and most important point’ combines PCL’s ethos of designing and manufacturing marketing leading Nitrogen generation equipment in a modern, innovative and simple to use housing. The PCL NEXUS series generator and inflator units allow the operator to automatically inflate up to 4 tires simultaneously to 95%+ Nitrogen purity using market leading digital inflation technology.
|
|
|
|
|
|
|
|
|
|
2492-22 Milwaukee 12V Cordless Lithium-Ion Sub-Compact Driver/Drill Radio Combo
|
|
|
The Milwaukee M12 cordless 3/8-inch drill driver delivers 250 in-lbs of torque in a compact light weight design. Delivers 250 in-lbs. of torque. Compact, light-weight design for versatile uses. Integrated LED and fuel gauge. No load speed 0-400/0-1,500 RPM. The only tool in its class with an all metal locking chuck, the 2410-22 drills and fastens up to 35% faster than the competition. The Milwaukee M12 radio is the first job site radio with an exclusive digital tuner that delivers highest reception accuracy and signal clarity for both AM and FM bands as well as being iPod and MP3 compatible.
|
|
|
|
|
|
|
|
|
|
|
10705 Tiger Tool Jost 5th Wheel Bracket Pin Puller
|
|
|
10705 Tiger Tool Jost 5th Wheel Bracket Pin Puller
|
|
|
|
|
|
|
|
|
|
15032 Tiger Tool Freightliner Bushing #680-322-01-50 Adapter
|
|
|
The Tige |
