6044 Associated Automated Battery & Electrical System Tester 12/24V 500A
6044 Associated Equipment Model 6044 Automated Battery / Electrical System Tester - An automated battery testing unit that uses no dirty, maintenance-prone carbon piles. Just enter the discharge current, press the “start” button and the 6044 will perform the BCI battery test automatically, giving the most accurate means of testing a battery. Testing for the alternator and starter has also been automated, simplifying the use of this very versatile electrical tester.
6033 Associated Digital 125 Amp 12 Volt Load Tester
The 6033 Associated Digital 125 Amp 12 Volt Load Tester takes the power of our 6030 and adds features for performance. A Digital 125 Amp load tester that computes the CCA of the battery. The heavy 125 Amp load enables the 6033 to detect bad batteries that are sometimes missed by the electronic testers. Performance Features: Kelvin connected digital meter displays current battery voltage, maximum voltage reading, minimum voltage reading, CCA of the battery under test, load test time (varies with the battery for shorter testing time). Lightweight and easy to use. Also features a recessed meter and insulated clamps. Patent Pending. MADE IN USA
6031 Associated Alternator Battery Tester 6/12V 125A
6031 Associated Alternator / Battery Tester - Tests for defective alternators diodes including GM trio test, and performs complete battery test as well. 125 amp load checks state of charge on conventional and maintenance-free batteries. Searches for excess starter current and alternator/regulator output voltage. Light weight, hand-held convenience. Heavy-duty clamps, Lightweight and easy to use, Recessed meter to protect from damage, 1 year warranty.
3075A ATEC 6/12 Volt 2/12/75 Amp Portable Automatic Automotive Battery Charger
The ATEC 3075A Automatic Automotive battery charger provides fully automatic charging of 6 & 12 volt Standard, GEL and AGM battery types. Five charging modes are available 6V/2 Amp, 6V/6 Amp, 12V/2 Amp, 12V/12 Amp & 12V/75 Amp for engine starting. The built-in digital display shows the voltage before during and after charging, amperage and time on charge. Heavy-duty transformer and rectifier provide long life. Safety features include, built-in circuit protection, reverse polarity protection. Automatically checks for correct connection (requires a minimum of 1 volt DC at the battery terminals). Heavy-duty cables and clamps are corrosion-resistant for better connections. Clamps connect to side or top mount battery terminals. Ideal for charging or boosting during winter season when the starting performance of vehicle batteries is lowered by cold or extreme weather conditions.
6043 Associated Inductive Amp Clamp Accessory 1000 Amp
The Associated 6043 inductive amp probe is capable of measurements up to 1000A. The large 2" jaw opening allows for easy use on the largest set of cables. Compatible with most Digital Multimeters, the unit comes with a 10 ft. coiled cord with standard banana plugs. The unit has two settings 200A and 1000A for improved accuracy and a zeroing button for use on DC circuits. LED's indicators include a power "ON" as well as a "LOW BATTERY". Unit is powered by a standard 9V battery for long life.
6028DL Associated Battery Tester 6/12 Volt 125 Amp 60 Amp Dual Load
6028DL Associated Battery Tester 6/12v 125 Amp 60 Amp Dual Load. Hand-Held Analog 12 Volt Combo Load Tester with two loads. A 60 amp Load for smaller batteries and a 125 amp Load to fully test larger batteries for both CCA and Amp Hours. Mid-sized Clamps with 24" 14/2ga wire offer greater flexibility when attaching to hard to reach applications.
12-1011 ATEC Digital Voltmeter
Associated Equipment's ATEC Digital Voltmeter, No. 12-1011, determines State of Charge and checks voltage. This Made in America tool makes it easy to check state of charge with the use of a table right on the tool that compares voltage reading and corresponding state of charge for both Lead Acid and AGM Batteries. Includes a digital readout of battery voltage.