10292 Robinair Quick Seal Adapter 1/4" MFL x 1/4" FFL automatically shuts off the charging hose when you disconnect it from the system, so any refrigerant left in the hose is not released. This also prevents “finger burn” and adds an extra measure of safety. Made of solid brass.

10293 Robinair Flexible Adapter 1/4"MFL  x 1/8"FFL is great for hooking up A/C systems for evacuation and recharging.  Adapters fit most systems, and sizes are available to fit most passenger cars.  Features brass fittings and a durable neoprene-coated hose, 6" long.

The 10296 Robinair 3/16 Quick Seal Adapter automatically shuts off the charging hose when you disconnect it from the system, so any refrigerant left in the hose is not released. This also prevents “finger burn” and adds an extra measure of safety. Made of solid brass.

This connector is used to extend the length of R134a hoses by connecting them together. Can be used on red or blue hoses. Connect any number of hoses to get the extra length you need— there’s no need to order special hose lengths (for automotive R-134a). Hose Extension Coupler R134a 14mm Female X 1/2 ACME Male Hose Connector (Each).

Adapter 1/2" FFL To 1/4" MFL

3/16" FFL X 1/4" MFL Quick Coupler Adapter W/Long Depressor For Deep Set Cores. Fits '77 and later GM and '81 and later Ford

10778 Robinair 1/4 Adapter Hose is great for hooking up A/C systems for evacuation and recharging.  Adapters fit most systems, and sizes are available to fit most passenger cars.  Features brass fittings and a durable neoprene-coated hose, 6" long.

Valve Assembly To Directly Connect A Thermistor Vacuum Gauge To A Vacuum Pump. Use with 15234 series of vacuum pumps. With a central valve, control provides real convenience.

Optional Vacuum Pump Intake Fitting Adapter. Brass Construction. 1/2" Female Flare x 3/8" Male Flare

Oil Drain Fitting & Cap Replaces 48116

Two pack of 1/2-16 ACME o-ring seal caps with retainer straps.

13494 1/2-16 Acme O-Ring Seal Cap

Inlet Tee 1/4" Male Flare X 1/2" Male Flare. Includes Caps.

Low Side Tank Adapter. 1/2" ACME Female X Lowside Spud used for tank fill and maintenance procedures. 1/2" ACME Female x Low-Side R-134a Coupler

Adapter

Elbow Adapters

19162 Ritchie Yellow Jacket 1/2 Acme Male X 1/4 Female Solid Adapter

19163 1/2 Female Acme x 1/4 Male Flare Adapter. SealRight fittings automatically and immediately trap refrigerant in the hose when disconnected, helping meet nonventing regulations and preventing finger burns. One-piece attaches quickly, saving up to 50 percent in time compared to 2-piece quick couplers. Works with or without Schrader core. Gaskets resist deterioration from CFC, HCFC, HFC refrigerants and refrigerant oils.

19165 Ritchie Yellow Jacket 1/2" Acme Female Quick Coupler X 1/4" Male Flare Adapter

19174 Ritchie R410a Adapter 1/4" Female Quick Coupler x 5/16" Male Flare

This Metering Tank Adapter allows gas to be recovered via the liquid port of a virgin refrigerant cylinder with a low side coupler for faster filling of your internal cylinder. The brass fitting is metered with a small orifice to prevent refrigerant flooding preventing damage to the recovery units compressor. Required for some units.

33112N JB Industries 1/4" Female Flare Quick Coupler x 1/4" Male Flare Auto Shut-Off Coupler. Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

33112RK JB Industries 1/4 Flare Secure Seal Rebuild Kit 33112N and 33113N

33113N JB Industries 1/4" Female Flare Quick Coupler x 1/4" Male Flare Auto Shut-Off Coupler-90°. Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

33115N JB Industries 5/16" Female Flare Quick Coupler x 1/4" Male Flare Auto Shut-Off Coupler. Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

33116N JB Industries 5/16" Female Flare Quick Coupler x 1/4" Male Flare Auto Shut-Off Coupler 90°. Use this quick coupler with existing charging hose. Immediately traps refrigerant discharge from hose when disconnecting from access fitting.

1/4" MFL X 1/4" MFL Hose Extension Coupler Without Valve Core

40380 Robinair 1/4 MFL X 1/4 FFL Coupler Hand Wheel Shut-Off Valve

Discontinued See V34905 Robinair 1/4 MFL X 1/4 MPT Coupler Hand Wheel Shut-Off Valve. Brass valves have a male pipe fitting on one end and valve male flare fitting on the other, can be used as an isolation valve fro vacuum gauges or other instruments during equipment service. A Nylon seat with Teflon packing gives a quick, tight seal. 1/4 MFL x 1/4 MPT.

Straight Shut-Off Valve 1/4" MFL X 1/4" MFL