TPI 1010A CO2 CO Temperature Humidity IAQ Meter With PC Data Logging Software And USB Cable - Measure ambient CO2, temperature, relative humidity, dew point, wet bulb, CO, and calculate percentage outside air. The TPI 1010A Indoor Air Quality (IAQ) Meter is a state of the art, easy to use tester designed to provide you with the necessary measurements to monitor and make adjustments to air handling devices.

Dial Thermometer Easy-to-read -40° Degrees To +160 Degrees F 1" Dial Face. Pocket-clip carrying case for protection and easy access. Temperature testing is a critical part of air conditioning and refrigeration service, and Robinair offers a full range of high quality, dependable pocket thermometers for simple temperature measurement.

Dial Thermometer 0 Degrees To 220 Degrees F 1" Dial Face. Pocket-clip carrying case for protection and easy access. Temperature testing is a critical part of air conditioning and refrigeration service, and Robinair offers a full range of high quality, dependable pocket thermometers for simple temperature measurement.

10945 Robinair Dial Thermometer 1-3/4" Face 0-220° F

11487 Titan Mini Tubing Bender: Bend soft thin walled tubing like copper, brass and there are others, bends tubing up to 5/16" or 8mm outside diameter.

11488 Titan Tubing Bending Pliers: Bend soft thin walled tubing like copper, brass and there are others, bends tubing sized 3/16", 1/4", 5/16" or 3/8" outside diameter.

11489 Titan 180 Degree Tubing Bender: Bend soft thin walled tubing like copper, brass and there are others, bends tubing sized up to 3/8" outside diameter. With a calibration gauge for smooth radius bends up to 180 degrees. Bends copper, brass and other thin walled tubing. Designed for 1/8", 3/16", 1/4" and 3/8" O. D. tubing

11490 Titan 1/8in - 7/8in Mini Tubing Cutter: This handy little tubing cutter will help with cutting your 1/8" to 7/8" tubing and it has interchangeable cutters for cutting up to 7/8" stainless steel tubing.

11491 Titan 1/8in - 1-3/8in Tubing Cutter: This handy little tubing cutter will help with cutting your 1/8" to 1-3/8" tubing and it has interchangeable cutters for cutting up to 1-3/8" stainless steel tubing.

11492 Titan Tubing Cutter Replacement Blade: This blade is for cutting copper and brass tubing to be used in Titan tubing cutters: 11490, 11491, 11494, 11496 and 11497

11493 Titan Tubing Cutter Replacement Blade (For Stainless): This blade is for cutting stainless steel tubing to be used in Titan tubing cutters: 11490, 11491, 11494, 11496 and 11497

11499 Titan 12in Basin Wrench: This basin wrench is forged with a milled jaw, sliding T-handle, pivoting head and self adjusting jaws. All of this allows you to remove the retaining nuts on a faucet without having to remove the sink. The design is to allow you to better work in the cramped space between the wall and the faucet.

Calibrated to measure 17 different refrigerants (R12, R22, R123, R124, R134a, R401A, R401B, R402A, R402B, R404A, R407C, R408A, R409A, R410A, R502, R507, R508B) these accurate gauges allow you to choose the temperature (°F or °C) and pressure units (PSI, bar, kPa and kg/cm3) your most comfortable using. The low side gauge has a pressure scale of 30 inHg VAC to 250 psig and the high side gauge has a pressure scale of 0 to 800 psig. Gauges come with a backlight to enhance the view and make the gauges easy to see in low light conditions.

1236-17-1 Cooper Bimetal Pocket Thermometer 1" Dial 5" Stem With Adjustment Sheath 25°F-125°F:  1" dial 5" stem. All 1” Pocket-tests are field adjustable and include a red, protective sheath with calibration wrench made with anti-microbial plastic and pocket clip.. The anti-microbial additive in the ABS plastic sheath inhibits the growth of bacteria on the unit. It does not protect users or others against bacteria.

1246-02-01 Cooper Bimetal Pocket Thermometer 1" Dial 5" Stem With Adjustment Sheath NSF 0/220°F:  1" dial 5" stem. All 1” Pocket-tests are field adjustable and include a red, protective sheath with calibration wrench made with anti-microbial plastic. The anti-microbial additive in the ABS plastic sheath inhibits the growth of bacteria on the unit. It does not protect users or others against bacteria.. NSF certified.

15062 Titan Single Flare Tool

15063 Titan Ratcheting PVC Pipe Cutter

15064 Titan Plumbers Brush

Replacement Blade for 15063

• Instant Tool Restoration: Your dull or nicked cutter returns to original factory specifications immediately upon installing this hardened steel replacement edge.
• Effortless Plastic Slicing: You experience smooth, rapid penetration through tough plastic walls because the factory-ground edge requires minimal physical force.
• Extended Tool Longevity: Replacing just the blade saves you money by avoiding the cost of purchasing an entirely new ratcheting assembly.

• Seamless Site Maintenance: Field crews can quickly swap out worn edges right on the job site using these specialized pipe cutting tool parts.
• Essential Trade Arsenal: You protect your daily productivity by stocking these vital components alongside your primary plumbing tools and professional HVAC tools.
• Flawless Condensate Piping: Clean, square cuts prevent leaks when your technicians assemble intricate drainage lines for commercial air conditioning equipment.

1/2 Acme Male X 1/4 Flare Swivel With Depressor

19162 Ritchie Yellow Jacket 1/2 Acme Male X 1/4 Female Solid Adapter

19165 Ritchie Yellow Jacket 1/2" Acme Female Quick Coupler X 1/4" Male Flare Adapter

Electronically measure humidity and temperature, Features data-hold and relative functions. Humidity range 10 to 95% RH, Temperature range -4 to 140°F (-20 to 60°C), Display Resolution, 0.1°F / 0.1°C / 0.1%RH, Wet bulb and dew point temperature readings, Data-hold and relative function, Dual LCD with bar-graph indication, Includes soft carrying case includes batteries.

Mini Tube Cutter 1/8" to 5/8" (4-15mm) OD Tubing