Refrigerant Pressure Temperature Chart For 41600 Series Manifolds or Universal Application. Lists 12 refrigerants including R-12, R-22, R-134A, R-410A, R-502, R-401A, R-401B, R-402A, R-402B, R-404A Fits conveniantly on the rear of 41400, 41600, 40100 series gauges with protector.
Maximize your time and effort with our Multiport Recovery Inlet Manifold. Designed specifically for salvage operations and recycling centers, this manifold connects to the inlet of your recovery unit or manifold gauges and allows you to pull up to 11 appliances at a time. Constructed with full flow ports and no valve cores installed to restrict refrigerant flow (included if needed). The 1/4 flare ports are protected with brass seal caps. If you are using a manifold set on the inlet of your recovery unit put one of these on each red and blue hose and double your capacity. You can even daisy chain them together for additional capacity. (Don't forget extra hoses and piercing pliers when purchasing these).
The 17800C is ideal for refrigerated trailers, buses, RVs, and other vehicles that use more than one refrigerant and have system charges greater than 6 pounds. The 17800B Recovers, Recycles, Evacuates, and Recharges R-12, R-134a, R-22, R-502, R-404, MP and HP Blends and many more! all in one fast, continuous operation through one hook-up.
Mastercool 69500 Recoverymate - Speed Up the Recovery Process! Remove unwanted moisture and separate oil from Recovered Refrigerant. (Use with any Recovery Machine).
Maximize your time and effort with our Multiport Recovery Inlet Manifold. Designed specifically for salvage operations and recycling centers, this manifold connects to the inlet of your recovery unit or manifold gauges and allows you to pull up to 6 appliances at a time. Constructed with full flow ports and no valve cores installed to restrict refrigerant flow (included if needed). The 1/4 flare ports are protected with brass seal caps. If you are using a manifold set on the inlet of your recovery unit put one of these on each red and blue hose and double your capacity. You can even daisy chain them together for additional capacity. (Don't forget extra hoses and piercing pliers when purchasing these).
Vortex AC, the next generation refrigerant recovery machine from INFICON, expands on the proven high performance and durability of the original Vortex. An upgraded compressor with ceramic bearings provides even longer life, increased recovery rates and a guarantee against failed compressors — under any circumstances. Vortex AC contains a single-valve, liquid-tolerant, oil-less compressor driven by a ˝ HP AC motor. This compressor/motor combination ensures durability and longevity without compromising recovery rates or torque. "3 Year Warranty!"
Fully Compliant with EPA Requirements For All Appliances. This Equipment Has Been Certified By Underwriters Laboratories Inc. To Meet EPA’s Minimum Requirements For Recovery Equipment Intended For Use With All Appliances Containing Refrigerant R134a, R12, R22, R502, R404a, R402a, R401a, R407c, R409a. Ul Control Number 2HA5. No assembly required! Simply remove the packaging material and add refrigerant. Automatic programmable charging. Lo side or Hi side or Hi & Lo side charging. AR2700M series includes a pump down valve for multiple refrigerant use. Multi language selectable in English, Spanish, French, German, and Chinese.
Fully Compliant with EPA Requirements For All Appliances. This Equipment Has Been Certified By Underwriters Laboratories Inc. To Meet EPA’s Minimum Requirements For Recovery Equipment Intended For Use With All Appliances Containing Refrigerant R134a. No assembly required! Simply remove the packaging material and add refrigerant. Automatic programmable charging. Lo side or Hi side or Hi & Lo side charging.
CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.
The F6-BOOST Refrigerant Recovery Unit provides users over 20% faster recovery rates than competitor models. The unique 2-cylinder, oilless compressor and long-lasting pistons are contained in a light-weight, ergonomically designed, easy-to-use unit. The F6-BOOST gives the user fast and reliable refrigerant recovery of ARHI groups III, IV, and V refrigerants.
Industry leading Refrigerant recovery The new F6-DP Recovery Unit from JB Industries features a full 1 horsepower motor and is backed by an unsurpassed 3 year Over The Counter warranty. The F6’s dual piston compressor recovers vapor at .6 lbs a minute and offers a self purge feature for changing refrigerants. The new high efficiency micro-channel condenser design keeps tanks cool and discharge pressures at a minimum. Push pull recovery rates soar to 11.00 lbs. a minute depending on hoses and length.
The Fieldpiece MR45 Recovery unit just changed the face of recovery with its advanced features, speed and light weight design. The MR45 is the first variable speed DC motor machine with a digital display. Pump refrigerant easier and quieter than ever before. Connect your hoses without navigating around dark tight spaces or picking the pump off the ground. View status messages and pressures directly on the big bright display. Carry the machine to and from the job site easily and well protected from environmental hazards. Turn the single rubberized control valve to route refrigerant through MR45, and use the self-purge function to pump the last traces into the recovery cylinder instead of being left in the machine or released into the environment.
The effects of high ambient temperatures and elevated tank pressures on the recovery process are well known. As the temperature / pressure of the recovery cylinder increases, the speed of the recovery process decreases until it is finally halted by a high pressure shut down. The CPS Pro-Set MT69 Submersible Subcooler provides the technician with a quick simple solution to mechanical subcooling and high tank pressure issues with any refrigerant or recovery unit. 1/4" Male flare fittings are standard and can be easily converted to 3/8" Male flare with adapters, dramatically improving recovery speed and efficiency. Subcooling woes be gone.
The RG3 from Promax sets the new standard in refrigerant recovery. All jobs are different. From a rooftop to a marine HVAC system, the Cube is easy to use and ideal for any residential and appliance sized recovery job. Capable of recovering both liquid and vapor refrigerant, the Cube is engineered to withstand the punishment of daily use even under extreme conditions. This season get the Cube and keep it cool all season long. Designed for recovery of medium and high-pressure refrigerants, including R-410A (Puron)
The RG6 is engineered to include what technicians need in a recovery machine – a rugged and tough machine with fast recovery rates. The RG6 is built for speed providing the best refrigerant recovery speeds in all conditions, including high temperatures.
The RLP From RefTec is a commercial / industrial grade pump used to transfer all class I, II, III, and IV refrigerant at rates up to 20GPM. The Refrigerant Liquid Pump standard model has 3/4" male flare connections with quick-connects as an option. Simple hose connections make fast work of chillers and large installations. Power requirements 110/115V 50/60Hz 1Ph 1.5Hp 15Amp. Unit dimensions are approximately 12.0" high x 14.50" wide x 9.0" deep. 55-lbs. Transfer Rate, 20GPM. Combine this pump with a Filter Rack for Recycling and clean-up of refrigerant for huge savings over replacement gas.
The RLP From RefTec is a commercial / industrial grade pump used to transfer all class I, II, III, and IV refrigerant at rates up to 20GPM. The Refrigerant Liquid Pump standard model has 3/4" male flare connections with quick-connects as an option. Simple hose connections make fast work of chillers and large installations. Power requirements 220/230V 50/60Hz 1Ph .75Hp 15Amp. Unit dimensions are approximately 12.0" high x 14.50" wide x 9.0" deep. 55-lbs. Transfer Rate, 20GPM. Combine this pump with a Filter Rack for Recycling and clean-up of refrigerant for huge savings over replacement gas.
Tired of Slow Recovery Rates? HandiVac Offers Twice the Recovery Capacity of Typical Oil-less Units. Dual 0.75hp GoldPlus oil-less compressors double recovery rates for servicing commercial cooling units. Built-in anti-slugging feature automatically prevents liquid from harming compressors during direct liquid transfer. Oil-free compressors eliminate maintenance hassles. Easily switch between R12, R22, R134a, R500, R502, R410a, R409, MP39 and other high pressure refrigerants & blends. Automatic low pressure shut off at 15-in. Hg. Float cable connection with bypass switch included.
TR21 CPS 2 Cylinder Commercial Refrigerant Recovery System is the recovery unit we have all been waiting for. Fast, Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 21 pounds The TR21's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, The TR21's Maintenance free Oil-less compressor features permanently lubricated and sealed main bearings and the optimized 2 cylinder / motor design provide fast efficient recovery of all gasses including R-410a. The unit also features a Cleanable 100 - mesh screen integrated into Suction Port to keep particulates from damaging the unit.
TR600 CPS 2 Cylinder Commercial Refrigerant Recovery System. Fast, Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 26 pounds. CPS introduces a new addition to its recovery machine line-up, the Pro-Set TR600. A lightweight, efficient and reliable refrigerant recovery machine in a compact, rugged, contemporary housing – the TR600 offers the ideal combination of form and function to make refrigerant recovery fast and easy! The TR600 adds the speed and convenience of CPS's proven oilless technology plus added condensor cooling in a lightweight package thats sure to speed up any recovery job. A Powerful 2/3 HP oil-less 2 cylinder reciprocating recovery compressor provides speed and and the added condensor adds ample cooling to keep tank temperatures low for fast recovery in high temperature environments.
The TR700 CPS 2 Cylinder Commercial Refrigerant Recovery System is The ultimate in dependability. Designed for servicing residential and commercial refrigeration systems, the BlackMAX® TR700 is the industry’s best looking and best-performing refrigerant recovery machine incorporating nonrestrictive piston manifold valves, a powerful two cylinder oil-less reciprocating compressor and twin fans. The resulting system provides superior airflow and condensing, which maximizes speed in both direct liquid and vapor recovery. Designed with high temperature materials. High strength bourdon tube gauges provide accurate vibration free movement. Twin fan design for ultra cool operation and high level condensing for cooler tank temps. Simple inlet and outlet valves with 1/4" flare fittings in the rear of the unit. A powerful 2/3 HP oil-less 2 cylinder reciprocating recovery compressor provide greater speed. Exceptional compressor, condensing and cooling systems allow fast recovery in high temperature environments. Automatic low pressure shut-off feature turns unit off when recovery is completed, restarts when a pressure rise occurs, truly automatic. 2 year warranty.
TRA21 CPS Mobile Refrigerant Recovery Recycling System for R-134A SAE J-2810. A system oil separator removes oil and particulates during recovery and the filter drier removes moisture for fast efficient clean recovery of all gasses. The TR21's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, Direct Vapor rates as fast as 1.6 lb/min and Direct liquid rates soar to 10 lbs/min.
TRS21 CPS 2 Cylinder Ignition Proof Refrigerant Recovery System has now been approved for use with R-600 & R-601 features include an Ignition proof ON-OFF switch, a sealed start relay and a hard wired 10’ (3 meter) power cord for safety. Weighing in at only 21 pounds The TRS21's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, The TR21's Maintenance free Oil-less compressor features permanently lubricated and sealed main bearings and the optimized 2 cylinder / motor design provide fast efficient recovery of all gasses including R-410a. The unit also features a Cleanable 100 - mesh screen integrated into Suction Port to keep particulates from damaging the unit. FOR USE BY PROFESSIONALLY TRAINED AND CERTIFIED OPERATORS ONLY. MOST STATES, COUNTRIES, ETC., MAY REQUIRE USER TO BE LICENSED. PLEASE CHECK WITH YOUR LOCAL GOVERNMENT AGENCY.
TRS600 CPS (Ignition Proof) 2 Cylinder Commercial Refrigerant Recovery System. Fast, Lightweight, Portable, Oilless recovery of all gasses and Now Approved For R-1234yf, R-600 & R-601 Refrigerants. Fast, Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 26 pounds. CPS introduces a new addition to its recovery machine line-up, the Pro-Set TRS600. A lightweight, efficient and reliable refrigerant recovery machine in a compact, rugged, contemporary housing – the TR600 offers the ideal combination of form and function to make refrigerant recovery fast and easy! The TRS600 adds the speed and convenience of CPS's proven oilless technology plus added condenser cooling in a lightweight package that's sure to speed up any recovery job. A Powerful 2/3 HP oil-less 2 cylinder reciprocating recovery compressor provides speed and and the added condenser adds ample cooling to keep tank temperatures low for fast recovery in high temperature environments. Now Approved For-600 & R-601 Refrigerant
TRS600E CPS 2 Cylinder Commercial Refrigerant Recovery System 240 Volt (Ignition Proof), Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 26 pounds. CPS introduces a new addition to its recovery machine line-up, the Pro-Set TR600. A lightweight, efficient and reliable refrigerant recovery machine in a compact, rugged, contemporary housing – the TR600 offers the ideal combination of form and function to make refrigerant recovery fast and easy! The TR600 adds the speed and convenience of CPS's proven oilless technology plus added condenser cooling in a lightweight package that's sure to speed up any recovery job. A Powerful 2/3 HP oil-less 2 cylinder reciprocating recovery compressor provides speed and and the added condenser adds ample cooling to keep tank temperatures low for fast recovery in high temperature environments.
TRSA21 CPS Refrigerant Scavenger SAE J2810 & J2851 Dual refrigerant Manifold & 30lb Tank. Fast, Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 21 pounds The TR21's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, The TR21's Maintenance free Oil-less compressor features permanently lubricated and sealed main bearings and the optimized 2 cylinder / motor design provide fast efficient recovery of all gasses including R-410a. The unit also features a Cleanable 100 - mesh screen integrated into Suction Port to keep particulates from damaging the unit.
TRSA30 CPS Refrigerant Scavenger SAE J2810 & J2851 & 30lb Tank. Fast, Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 25 pounds The TRSA30's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, The TRSA30's Maintenance free Oil-less compressor features permanently lubricated and sealed main bearings and the optimized 2 cylinder / motor design provide fast efficient recovery of R134A & R1234yf. The unit also features a Cleanable 100 - mesh screen integrated into Suction Port to keep particulates from damaging the unit.
