100 Assenmacher Specialty Tools 10mm Stud Remover Parts Kit: This kit contains the internal replacement parts for the 10mm Stud Puller part number 200-10.

1000-5159 OTC 72" Swivel Hose Assembly For 5610 Pressure Kit.
The 5610 professional kit can be used for domestic and import applications. High and low pressure gauges make this kit useful for both transmission and engine work. Kit comes complete with adapter for most applications. Designed to be used for both static and on road testing.

120 Assenmacher Specialty Tools 12mm Stud Remover Parts Kit: This kit contains the internal replacement parts for the 12mm Stud Puller part number 200-12.

14440 Water Pump Wrench For GM Northstar

Best by Far - Yet Competitively Priced. Micrometer head assures accuracy in feeding. Expands quickly to cylinder size with fast action rack and pinion. Bottom guard plate helps prevent stones from accidentally hitting the crankshaft. Universal joint action makes grinding of back cylinder easy. Clip-on stones and wipers are easily changed in a few seconds. Stones are available in five grits. Use with heavy-duty 1/2" drill.

280 Grit Fits Lisle Part Number 15000 Cylinder Hone includes 2 Stones and 2 Wipers, Fits all Rack ranges except 2 3/4" - 3 3/4" Rack (set #15550)

Rack Set Cylinder Size Range: 4" to 6-1/4"

Rack Set Cylinder Size Range: 6 1/8" - 10 1/4", 155 -260mm

15990 Lisle Engine Cylinder Hone Set 500 Grit

16023 Titan 1/4"-1/2" Stud Extractor. Fits 1/4" to 1/2" (6 - 12mm) studs. Impact gun compatible. Ideal for removing stripped, rusted, broken or smooth studs. Hex drive can be a driver with a 15/16" wrench, 3/8" ratchet, or 3/8" impact tool.

An "ON THE CAR" Tool.

Effectively removes carbon from ring grooves on pistons 2 to 5_ (51 to 127mm).

18000 Universal Camshaft Bearing Tool

Lisle Spring Clutch Eliminates Ratchet Problems. The Lisle spring clutch assures a proper fit on the piston and a positive locking action. Range 2 1/8" to 5".

2031 Exhaust and Tailpipe Cutter

20500 Lisle Ring Compressor 3-1/2" - 7". Lisle Spring Clutch Eliminates Ratchet Problems. The Lisle spring clutch assures a proper fit on the piston and a positive locking action. Range 3 1/2" to 7" Diameter 3-1/2" High. Lisle spring clutch eliminates ratchet problems. Assures a proper fit on the piston and a positive locking action.

Lisle Spring Clutch Eliminates Ratchet Problems. The Lisle spring clutch assures a proper fit on the piston and a positive locking action. Range 3 1/2" to 7".

21100 Lisle 1-1/8" and 1-3/8" Large Valve Lapper. For Hand Lapping Valves. Thick handles for easy lapping. Thick handles for easy lapping. Has 1-1/8" and 1-3/8" diameter cups for larger valves. For hand lapping valves. Specialized locking tab positively secures cups to sturdy handles.

21200 Lisle 5/8" and 13/16" Small Valve Lapper. For Hand Lapping Valves. Thick handles for easy lapping. Thick handles for easy lapping. Has 5/8" and 13/16" diameter cups for smaller valves. For hand lapping valves. Specialized locking tab positively secures cups to sturdy handles.

4 Ways Better! LOW FRICTION! Wrinkle Band cuts friction in half.

2286 Harmonic Balancer Puller

For Springs 3/4" to 1 1/16". Heavy-duty frame and screw for rigidity. Two jaw sizes. For Briggs and Stratton, Clinton, Harley-Davidson, etc.

Stone-Type Glaze Breaker

220 Grit Replacement Stones for 23500 Glaze Breaker Replacement stones and pins.

240 Grit Replacement Stones Replacement stones and pins. For use after re-boring only . Not for glaze breaking.

320 grit for moly rings.

24000 Lisle Piston Ring Groove Cleaner 2-3/4" to 5" Diameter Heavy coil spring holds cutter in groove for fast removal of carbon. Tool comes with standard 24020 cutter blade sizes: 5/64" in., 3/32" in., 1/8" in., 5/32" in., 3/16" in. and special 24350 cutter blade with sizes: 1.5mm, 1/16" in., 1.75mm, 2mm, and 1/4"". Handles pistons 2 3/4" in. to 5" in. diameter. 24270 metric cutter wheel is available with 2mm, 2.5mm, 3mm, 4mm and 5mm.

Hone and remove glaze from engine cylinders from 2” to 7_ (51 to 177mm) in diameter.

For Rough Honing

For Hydraulic Cylinders

312 Assenmacher Specialty Tools 5/16" Stud Remover Parts Kit - Internal replacement parts for 5/16" Stud Puller.

Save by Reducing Ring Breakage. Tapered jaws to remove and install most passenger car and light truck rings from 3/64" to 1/4" (1.2 - 6.3mm).

Wrench removes thermostatic fan assembly on 1993 to current 4.

34350 Water Sensor Wrench for Duramax

3 pc. Fan Clutch Wrench Kit used to remove and replace thermostatic fan assemblies while eliminating the need for various size holding wrenches.

Use in conjunction with the Universal Pulley Holder (3471) to remove and replace the thermostatic fan assembly on Ford 6.

35000 GM Flex Fuel Disconnect

Makes valve component disassembly and reassembly fast and easy. Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly.

When replacing pistons or rings, or whenever you're rebuilding or overhauling an engine, always remove the ridge that forms at the top of the cylinder. The pistons and rings will suffer damage if the ridge is left in place when the engine starts up for the first time.  Range 2-11/16" - 5-5/15" (68.3 - 134.9mm).

Patented Tool Combines the Innovation of a GearWrench® Ratcheting Wrench with the Requirements of the Serpentine Belt Removal Tool to Provide the Professional with the Best Possible Combination

3684D KD Tools Serpentine Belt Grabber Tool. Belt Grabber used for installing, routing and removing serpentine belts.     Spring loaded handle that remotely activates belt grabber. Unique "grabber" feature allows for quick use, saving time.

The Lisle 36880 Cam Lock Tool Locks Camshaft Sprockets in Place During Belt / Chain Replacement. This versatile tool easily locks and holds both camshaft sprockets firmly in place. Unique design uses knurled pins to hold against the inside of the cam sprockets. The two parallel bars "float" which allows the knurled pins to align with the sprockets. Preserves the engine timing during belt or chain replacement.

375 Assenmacher Specialty Tools 3/8" Stud Remover Parts Kit - Internal replacement parts for 3/8" Stud Puller.

Long and slender, will reach into small recesses where valve springs and retaining washers are located.

38220 Universal Cam Adjuster

No more fumbling or searching for dropped spark plugs! Its a Magnetic! 9/16” Spark Plug Socket. For removal and installation of 2004 and newer F-150 pick-ups and other vehicles with the 5.4L 3 valve Triton V8 engine

3950 2 pc. 6.0L Powerstroke Fan Clutch Service Kit

3951 6.0L Powerstroke Fan Clutch Holding Tool

3970 Honda Acura Crankshaft Holding Tool

39960 Ford Transmission Line Disconnect Set

12 pc Fuel - Transmission Line Disconnect Tool Kit

41580 Fan Clutch Service Kit

41720 8 pc. Master Sensor Socket Kit

41730 3 pc. Magnetic Spark Plug Kit

Lisle Fan Clutch Wrench Set for GM

3 pc 5/8” Magnetic Universal Spark Plug Svc Set

This 2-piece set removes and installs fan clutches.

43300 Pneumatic Fan Clutch Wrench Set

43380 32mm Driving Wrench for LIS-43300

7/8”

437 Assenmacher Specialty Tools 7/16" Stud Remover Parts Kit - Internal replacement parts for 7/16" Stud Puller.

Fan Clutch Spanner Wrench

4437-8 OTC 1” & 1-1/16” Oil Pressure Sensor Socket (Short Access) - 1-1/16" and 1" Oil Pressure Socket (short access), 3/8" Drive. Included with kit for part number 4437 (Sensor Socket Set [8-Piece]).

OTC 4475 Grooved Pulley Strap Wrench - Use to hold a grooved pulley when servicing alternators, water pumps, power steering pumps, etc. Also may be used to rotate the camshaft or crankshaft for engine service. Holds tighter than a standard strap wrench.

OTC 4572 Large Valve Spring Compressor - Designed to compress valve springs on overhead valve engines. Includes two valve spring adapters, which fit valve spring retainers up to 1" (25 mm) and 1-3/16" (30 mm).

OTC 4573 Universal Overhead Valve Spring Compressor - Permits removal and installation of valve springs with out removing the cylinder head on many cars and light trucks. Durable steel construction. Spring loaded offset jaws easily grip and compress valve springs.

OTC 4603 Frost Plug Remover / Installer Set - Designed to remove and install frost plugs used in liquid-cooled gas and diesel engines found in automobiles, trucks, SUVs, agricultural equipment, and construction equipment. Simply use a hammer with the driver and appropriate disc to install frost plugs ranging from 1" to 2-3/8" in diameter.

OTC 4604 Frost Plug Installer Set - Designed to install frost plugs in liquid-cooled gas and diesel engines found in automobiles, trucks, SUVs, agricultural equipment, and construction equipment.

OTC 4645 Serpentine Belt Tool - Fits tensioner pulleys with 13mm-16mm, 18mm hex or 3/8" and 1/2" square drives. For hard to access tensioners; there are 13mm and 15mm 12-point wrenches built into the handle. 13mm, 14mm and 15mm crows foot wrenches also included.

OTC 4652 Adjustable Fan Clutch Holding Tool

OTC  4673-1 – 29 mm Vacuum Switch and O2 Socket, 1/2" Drive.

OTC  4673-2 – 7/8" Vacuum Switch and O2 Socket (wide slot), 3/8" Drive.

OTC  4673-3 – 27 mm Thermal Sensor Switch, 1/2" Drive.

OTC  4673-4 – 7/8" Vacuum Switch and O2 Socket (narrow slot), 3/8" Drive.

OTC  4673-5 – 1-1/16" & 1" Oil Pressure Sending Unit Socket, 3/8" Drive.

OTC  4673-6 – 7/8" O2 Sensor Socket, offset 1/2" Drive.

OTC  4673-7 – 7/8" O2 Sensor Socket (low profile), offset 3/8" Drive.

OTC 4681 Power Steering Pump / Alternator Remover/Installer Tool - This is a reversible 2-in-1 tool removes and installs press-fit alternator and power steering pump pulleys.

OTC 4748 Belt Tension Gauge - This easy to use and read tool allows for accurate belt tension to be set after belt replacement, adjustment, or wheel service. Use on secondary drive belts with a 10 lb. specification.

OTC 4754 Universal Pulley Holder - Universal design fits many different size pulleys having slots or holes, such as camshaft pulleys or crankshaft pulleys.

OTC 4801 Universal Clutch Holder - Holder arms designed to fit into the external teeth of a clutch hub, but can also be used on gears and sprockets. Opens to handle a 5" OD hub.

OTC 4802 Universal Pulley Holder Locking Pliers Set - This adjustable locking pliers can be used to hold pulleys, clutch hubs, flywheels, gears, and sprockets with internal or external teeth up to a 4" diameter. Can also be used on applications with slots or holes with the 5/16" pins.

OTC 4803 Universal Pulley Holder Locking Pliers Set - This adjustable locking pliers can be used to hold pulleys, clutch hubs, flywheels, gears, and sprockets with internal or external teeth up to a 4" diameter. Can also be used on applications with slots or holes with the addition of the interchangeable 5, 6, 7, 10, and 16mm pin sets. Complete with metal carry case.

OTC 4804 Heavy Duty Pulley Holder - This strap style universal wrench features a 9" drop forged handle and 23" leather strap for excellent grip on diameters up to 7". The milled foot increases grip on the strap and pulley as handle force is increased.

Redesigned for Newer 3.5L and 3.6L GM Engines. Also Works on GM V6 2.8L, 3.1L and 3.4L. Quickly removes push rods so you can replace the intake gasket. No need to loosen and retighten the rocker arm. The tool pivots the rocker arm to compress the valve spring and free the push rod for removal.

OTC 4838 Piston Ring Compressor Set (6 Piece) - This 6 ring set covers 2 7/8" thru 4 3/8" piston diameters. The ring compressor pliers feature a ratcheting lock to hold the handles in position for easy piston installation.

OTC 4839 Adjustable Piston Ring Expander Pliers - These simple pliers include tips designed to capture the ends of piston rings to hold and expand them securely while installing onto pistons.

OTC 4840 Piston Ring Compressor Set with Ring Expander - This complete set includes 12 chrome plated compressor sleeves covering 1-3/8" thru 4 3/8 diameter piston applications. Both the ring compressor and ring expander pliers feature a ratcheting lock to hold the handles in position for easy piston and ring installation. Complete with a metal carry case.

OTC 4842 Heavy Duty Valve Spring Compressor - Used to compress valve springs for removal or installation. The heavy duty C-frame has a 9" opening and a 5" throat. Kit includes 16mm, 19mm, 23mm, 25mm, and 30mm valve spring retainer adapters.

4846 OTC Tappet Block Alignment Set - These adapter screws provide perfect alignment of the oil hole from the crank case to the tappet block on Shovel and Evo style engines.

OTC 4850 Flywheel Puller - Designed to pull magneto flywheel, clutch hubs, or starter gears. Works on wet or dry clutches. 6x25mm and 8x40mm bolts included.

4852 OTC Adjustable Primary Locking Bar - Used to lock primary sprockets and pulleys for removal and proper torquing of retaining nuts. A must have for Chain or Belt Drive style primary drive service. Adjustable length from 4” to 7 ¼” to cover virtually any style primary application.

4856 OTC Primary Drive Locking Tool - This wedge is placed between the primary chain and motor sprocket to lock them together during removal and installation of the engine sprocket nut without damage.

4858 OTC Clutch Spring Compressor Tool - This tool will release the clutch spring pressure for easy removal and installation of the retainer ring.  Applications include HD big twin 90-97, and includes spring compressor nut for use on XL 91-05 and Buell.

4860 OTC Trans & Steering Bearing Puller/Installer Kit - This combination kit works on transmission main-shaft and steering stem bearings on HD motorcycles.

Shaft Splined 1-3/4"

FLYWHEEL PULLER

FLYWHEEL PULLER

FLYWHEEL PULLER

FLYWHEEL PULLER

FLYWHEEL PULLER

FLYWHEEL PULLER

4866 OTC Timing Plug - This threaded clear acrylic timing plug used in conjunction with a timing light allows for viewing the crankshaft timing marks without oil spraying out of the crankcase, typical during full advance RPM.  Fits all HD models.

4875 OTC Cam/Crank Locking Tool - Designed to lock the cam and crank sprockets together for removal, replacement and proper torqueing of the sprocket bolts.

4876 OTC Cam/Crank Locking Tool - Designed to lock the cam and crank sprockets together for removal, replacement and proper torqueing of the sprocket bolts.

4878 OTC Ignition Switch Housing Alignment Tool - This tool aligns the ignition switch housing properly as the retaining screws are being torqued.  Proper switch alignment extends the life of the ignition switch.  Applications include HD FL Touring models 03-Present, V-Rods 02-Present.

4888 OTC Flywheel Socket Set - The best flywheel sockets available.  These offer a low profile design that provides full nut to socket contact to eliminate rounding off the nut and slippage.  Made from heat-treated chrome moly steel.

4896 OTC Oil Filter Ring - Slim wrench provides clearance around oil coolers and crank poistion sensor.  Use on 14 flute HD filters.  3/8" square drive.

4898 OTC 64mm/14 Flute Oil Filter Socket - Fits Polaris oil filters, as well as other filters with 64mm x 14 flutes.

4948 OTC Water Pump Drive & Rotor Puller - Installs the waterpump drive gear on the rotor and removes the rotor from the crankshaft.  This tool also works on RZR XP.

500 Assenmacher Specialty Tools 1/2" Stud Remover Parts Kit - Internal replacement parts for 1/2" Stud Puller.

Hand grind small and large flat-head unslotted valves.

OTC 5022 Oil Seal / Wear Ring Installer

OTC 5024 Navistar Injector Sleeve Remover / Installer

The OTC 5025 refractometer is a portable, precision, optical instrument used for measuring the Diesel Exhaust Fluid (DEF) concentration. When a liquid sample is placed on the prism, the light passing through it is bent. The more concentrated the liquid, the more the light will bend. The refractometer contains a reticle, or scale, that is enlarged through  the eyepiece to measure this light. The values on the scale have been established to evaluate the DEF condition. The OTC 5025 makes this a simple and quick process for an operator or technician.

Truck Clutch Release Bearing Travel Gauge

OTC 5039 Charged Air Cooler Tester - This is the easy way to find air leaks in the charged air cooler systems used on class 7 & 8 truck engines. The tester features a large 2-1/2", 0-60 PSI pressure gauge, regulator and relief valve, and two safety cables. It also has quick disconnect air fittings that attach to a 3", 3-1/2", or 4" cooler hose.

Straightening Fixture (Pr)

OTC 5042 Cummins Injector Puller

OTC 5043 Clutch Service Set - Here's an ideal companion set to the OTC 5015 clutch handler. Designed for Spicer heavy-duty clutches, the nine tools in this set help with a variety of jobs, from clutch installation and removal to flywheel drive-pin installation to clutch adjustment. Includes handy plastic carrying case.

OTC 5049 Flywheel Pilot Bearing Puller

Hand grind small and large flat-head unslotted valves.

OTC 5051 Eaton® / Fuller® Bearing Puller Set

OTC 5062 Auxiliary Countershaft Shim Tool

OTC 5063 Eaton® / Fuller® Timing Tool - Used for timing both Eaton® and Fuller® transmissions.

OTC 5064 Eaton® / Fuller® Countershaft Pushing Tool

Cs Bearing Driver

2" Bearing Driver

OTC 5070 Truck Clutch Alignment Tool - Designed for perfect fit to the spline of the clutch disc...easily supports heavy pressure plates.

51613 Titan Fuel & Air Conditioning Line Disconnect Tool:  This tool allows you to quickly and easily separate quick disconnect fittings on many late model vehicles.  It works on fuel lines, heater and air conditioning lines as well and will fit quick disconnects sized 3/8, 1/2, 5/8 and 3/4 of an inch.

51614 Titan Fuel Line Disconnect Tool: This tool is essential for the service and replacement of fuel filters on many late model vehicles with quick disconnect style fittings. Works on 5/16 and 3/8" fuel lines with the quick disconnect fittings and provides quick and easy separation.

OTC 516160 Flywheel Attachment For Clutch Handler - Optional flywheel attachment for OTC 5018A Truck Clutch and Flywheel Handler.

51700 Titan Honda / Acura Crankshaft Pulley Holder: This tool allows you to put the crankshaft in a stationary position for engine or powertrain service on most Honda and Acura vehicles 1992 and later. Also used to remove and install the crankshaft pulley.

OTC 5280 Diesel Particulate Filter (DPF) Cleaner - The Diesel Particulate Filter (DPF) Cleaner was designed with shop service in mind. The cleaning process allows the DPF to be cleaned as part of a general maintenance schedule at the service location with minimal time away from the vehicle. Its portability allows the unit to be placed as close to the vehicle as possible and to be stored wherever needed in the service facility.

OTC 5281 OTC DPF Thermal Processing Unit - The 5281 DPF Thermal Processing Unit is a device which will thermally regenerate a DPF unit at a controlled, pre-programmed rate. Sometimes, the DPF cannot be regenerated on the truck due to a failure with the vehicle's own regeneration system, or in the case of retrofit applications, a lack of an on-vehicle regeneration system. Thermal regeneration of DPFs is used in conjunction with the OTC 5280 DPF Cleaner, and maximizes the cleaning efficiency of the cleaner.

OTC 52871 Detroit Diesel Engine Adapter Mounting Plate - For coach 6V and 8V series 71 Detroit Diesel. Mounting plate includes all the necessary hardware and an engine application chart.

OTC 528776 Ford EFI Adapter

OTC 528853 Volvo TD67 and TD71 Adapter -  This adapter plate is for use with the OTC 1750 Engine Stand w/o universal engine adapter assembly and 1750A Revolver Diesel Engine Stand with OTC 205061 Universal Engine Adapter Assembly. Works for Volvo TD67 and TD71 engines.

OTC 528856 International Harvester Adapter Plate -  This adapter plate is for use with the OTC 1750 Engine Stand w/o universal engine adapter assembly and 1750A Revolver Diesel Engine Stand with OTC 205061 Universal Engine Adapter Assembly. Works for International Harvester IH300 and 400 Series engines.

OTC 528859 John Deere Adapter - This adapter plate is for use with the OTC 1750 Engine Stand w/o universal engine adapter assembly and 1750A Revolver Diesel Engine Stand with OTC 205061 Universal Engine Adapter Assembly. Works for JD 400 and 500 engines.

OTC 528861 John Deere Adapter - This adapter plate is for use with the OTC 1750 Engine Stand w/o universal engine adapter assembly and 1750A Revolver Diesel Engine Stand with OTC 205061 Universal Engine Adapter Assembly. Works for JD Powertech 4.5L and 6.8L.

OTC 528863 John Deere Adapter - This adapter plate is for use with the OTC 1750 Engine Stand w/o universal engine adapter assembly and 1750A Revolver Diesel Engine Stand with OTC 205061 Universal Engine Adapter Assembly. Works for JD 8995 V6 and must be used in conjunction with OTC 528859 John Deere Adapter.

OTC 528868 International Harvester Adapter - This adapter plate is for use with the OTC 1750 Engine Stand w/o universal engine adapter assembly and 1750A Revolver Diesel Engine Stand with OTC 205061 Universal Engine Adapter Assembly. Works for International VT365.

OTC 529219 Jack Replacement Saddle - This is the replacement jack saddle for the OTC 1525 2-Ton Service Jack.

Spark Plug Pliers

SMALL DPF INLET CONE

LARGE DPF INLET CONE

MEDIUM DPF INLET CONE

OTC 553916 Cummins Adapter - OTC Diesel Particulate Filter (DPF) Cleaner Cummins Adapter for use with the OTC 5280 Diesel Particulate Filter Cleaner

OTC 553990 UD TRUCK (with Hino Engine) Upgrade Kit - OTC Diesel Particulate Filter (DPF) Cleaner Hino Engine for use with the OTC 5280 Diesel Particulate Filter Cleaner

OTC 553991 Isuzu Upgrade Kit - OTC Diesel Particulate Filter (DPF) Cleaner Isuzu upgrade kit for use with the OTC 5280 Diesel Particulate Filter Cleaner

OTC 553993 Volvo / Mack Upgrade Kit - OTC Diesel Particulate Filter (DPF) Cleaner Volvo / Mack upgrade kit for use with the OTC 5280 Diesel Particulate Filter Cleaner

OTC 554654 Complete OEM DPF Upgrade Kit - Complete OEM upgrade kit for use with the OTC 5280 Diesel Particulate Filter Cleaner

Plastic Case For Master Ball Joint Set

Plastic Case For Master Ball Joint Set

Detroit Diesel Upgrade Kit For DPF

CONE SEAL REPAIR KIT

CAT ADAPTER SEAL REPAIR KIT

CUMMINS ADAPTER SEAL REPAIR KIT

VOLVO ADAPTER SEAL REPAIR KIT

ISUZU ADAPTER SEAL REPAIR KIT

UD TRUCK/HIND ADAPTER SEAL REPAIR KIT

DETROIT DIESEL ADAPTER SEAL REPAIR KIT

Navistar Upgrade Kit For DPF OTC 5280 Diesel Particulate Filter Cleaner The Diesel Particulate Filter (DPF) Cleaner was designed with shop service in mind. The patented cleaning process allows the DPF to be cleaned as part of a general maintenance schedule at the service location with minimal time away from the vehicle. It’s portability allows the unit to be placed as close to the vehicle as possible and to be stored wherever needed in the service facility.

558382 OTC Auxiliary Box Adapter -  Auxiliary Box Adapter for OTC 5130.

558569 OTC Heppa Filter 12" 5280 Diesel Particulate Filter (DPF) Cleaner

VACUUM PAIL / FILTER

558571 OTC Cartridge (Air) Filter (30 In. Long). 5280 Diesel Particulate Filter (DPF) Cleaner

DESICCANT (CRYSTAL DRYER MEDIA; 2 PKGS.)

COALESCING FILTER ELEMENT

Fast, Economical and Accurate method to test for combustion gas leaks from head gasket leaks, cylinder head leaks to engine block leaks. NEW & IMPROVED! Dual-Chamber for Higher Accuracy Test. The tester features a dual-chamber design for higher accuracy to eliminate false readings. Test results in the chamber will provide a true indication of a combustion leak. Works on Gasoline and Diesel engines!

OTC 5604 Motorcycle Compression Tester Kit - Designed specifically for testing motorcycle and small engines, this kit features a specially designed compression gauge and hose assembly, plus three different size hose adapters. Compression Tester and hose lengths are designed for optimal viewing along side engine. Covers most popular motorcycle and small engine plug sizes.

OTC 5605 Deluxe Compression Tester Kit - Complete with standard and specialty adapters, this deluxe kit offers a complete package for compression testing on gasoline engines. Kit includes the deep well connector used on recessed plug well style heads and the new ford Triton™ engine adapter using 16mm thread plugs.

OTC 5608 Compression Tester Ford 12mm Adapter - Use with OTC comp ression testers to access hard-to-reach spark plug holes.

OTC 5609 Cylinder Leakage Tester Kit - Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit come complete with adapters for most applications. Features include, Dual 2-1/2" gauges feature chrome bezel and rugged protective outer boot, Scales read 0-100 psi and 0-700 kPa, Pressure regulated manifold includes quick couplers, Long flex 24" 14 mm hose, 10 mm, 12 mm and 18 mm thread adapters, Blow molded hard case with removable lid.

OTC 5610 Transmission / Engine Oil Pressure Kit - The 5610 professional kit can be used for domestic and import applications. High and low pressure gauges make this kit useful for both transmission and engine work. Kit comes complete with adapter for most applications. Designed to be used for both static and on road testing.

OTC 5613 Vacuum / Pressure Gauge Kit - The 5613 is deal for testing vacuum lines and components. Accurately tests low pressure fuel systems. Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit comes complete with adapter for most applications. Pin point hard to find problems such as cracked lines.

562 Assenmacher Specialty Tools 9/16" Stud Remover Parts Kit - Internal replacement parts for 9/16" Stud Puller.

OTC 563197 Ash Disposal Kit for 5286 (Set of 5) - Ash disposal system enables technician to quickly and easily remove and dispose of particulate matter in accordance with local environmental requirements.

SADDLE EXTENSION KIT FOR 1590 10 TON END LIFT

The Astro Pneumatic 5820 Engine Transverse Bar with Support Arm makes removal of transaxles easy by supporting engine of front wheel drive vehicles up to 700 lbs. The support arm provides three point support for off-center loads.

The OTC 5911A magnetically attaches to pre-loosened oil pan drain plugs so you can remove them without dropping and avoid getting burned with hot oil. The patented design provides universal application to hex heads. A flexible shaft can be used in virtually any location and still turn the plug as desired. An added feature of the 5911A is a removable magnetic end with 1/4" square drive. When removed, the drain plug pro becomes a flexible-shaft 1/4" bit driver. Use for sockets and bit holders to get into hard-to-reach places including under dashboards and in engine bays to remove bolts once loosened. Designed for repetitive daily use with a Lifetime warranty.

OTC 5940 BMW Head Bolt Socket - This tool was designed to fit in the cylinder head on M42 and M50 engines to remove and install cylinder head bolts.

60 Assenmacher Specialty Tools 6mm Stud Remover Parts Kit - Internal replacement parts for 6mm Stud Puller.

OTC 6005A Glow Plug Removal Tool - Set includes 10 mm and 12 mm split nuts, three spacers (3/16", 1/4", and 5/16"), plastic storage/ organizer case and instructions.

OTC 6022 Toyota Head Bolt Socket - This socket is specially designed to tighten or loosen head bolts on Toyota Paseo vehicles with 3S-GE and 3S-FE engines.

OTC 6060A GM Water Pump Socket

OTC 6068 Ford Diesel Fan Clutch Wrench - Designed for use with OTC No. 7205E1 holding tool to remove fan clutch assembly. Has the same size opening as the OTC No. 7205E2 wrench, but has a special bend in the handle to provide clearance for accessories, found on some vehicles.

OTC 6069 Cummins Diesel Fuel Injector Remover Kit - Kit contains a fuel injector connector tube remover and fuel injector puller. The fuel injector connector tube must be removed before removal of the injector, or both will be damaged. Application: 1998-1/2–2002 Dodge pickups and vans with 5.9L 24-valve Cummins diesel turbo engine.

Drip Pan For 1726 Engine Stand

Schley Products 61200 Two Piece Kit (Used on water pump pulleys that are bolted on) - This two piece kit gives the professional technician the ability to service all fan clutches that have bolt on pulleys on the water pump.

Universal Fan Clutch Wrench

BMW Fan Clutch Wrench 32mm: This heavy duty 32 mm wrench has been designed with extra length to allow the technician to easily reach down to the fan clutch hex coupler, with a beefy design for plenty of strength and leverage to loosen the tightest hex couplers. Works handily with the 61600 universal fan clutch pulley holding tool. The heavy duty 32 mm wrench works on all models while the MS6160 universal holding tool works on all except the 4.0l & 4.4l v-8 engines made from heat treated steel this wrench comes with a soft grip handle.

62160 Titan 5/8in 1/2in Drive Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

62161 Titan 5/8in x 10in Swivel Spark Plug Socket with Fixed Extension

62162 Titan 13/16in x 10in Swivel Spark Plug Socket with Fixed Extension

62163 Titan 13/16in 1/2in Drive Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

625 Assenmacher Specialty Tools 5/8" Stud Remover Parts Kit - Internal replacement parts for 5/8" Stud Puller.

OTC 6293 Distributor Bushing Installer / Reamer - This tool is used to install the distributor drive shaft lower bushing into the engine block. Then this same tool is used to ream the new bushing so that the distributor drive shaft fits properly into the bushing.

For 7/32" hex retaining bolts on Ford Ignition Module. May be turned by hand or with 1/2" wrench.

OTC 6466 Ford Crankshaft Sensor Positioner - Similar to Ford 303-354

OTC 6479 Ford Crankshaft Holding Tool - Similar to Ford Tool no. 303-573.

OTC 6488 Ford Cam Tool Kit - The OTC Ford Cam Tools ensure correct cam timing when servicing timing belts, chains, head gaskets or other valve train repairs. Kit for 1997 through 2006 4.0L Explorer/Mountaineer SOHC V-6 engines. Contains tools 6478, 6479, 6480, 6481, 6482, 6484, 6485, and molded storage case.

The OTC 6489 Ford Cam Tools Kit ensures correct cam timing when servicing timing belts, chains, head gaskets or other valve train repairs. The 22 tools in the 6489 Master Kit cover 1992 thru 2002 applications and comes in a molded storage case.

OTC 6495 Harmonic Balancer Holding Tool - Designed as a holding ring with three pins to fit into the openings on a harmonic balancer.

OTC 6498 Ford 4.6L and 5.4L 4-Valve Cam Timing Kit - Saves time. All tools required for camshaft timing are in this one convenient kit.

OTC 6500 Flex-Head O2 Sensor Wrench - Flexible head design assists in the removal of stubborn O2 sensors.

OTC 6594 Ford Oil Line Disconnect Tool for 6.0L - This tool is utilized to disconnect the high-pressure oil rail supply line from the fuel rail when removing the fuel injectors.

OTC 6595 Ford High Pressure Oil Line Disconnect - This tool is used to disconnecto the high pressure oil line from the cylinder head.

OTC 6613 Variable Pin Spanner Wrench - Universal design fits many different types of pulleys having slots or holes, including camshaft pulleys and crankshaft pulleys.

OTC 6616 GM Water Pump Holding Tool - This tool holds the timing chain in place so that the water pump can be removed for service. It has been specially designed to allow easy installation regardless of the timing chain orientation.

OTC 6617 Alternator Pulley Service Kit - This tool has been designed to allow one to adjust the alternator pulley and decoupler extending belt life and belt tensioner life. Additionally when the pulley and decoupler are in proper working alignment makes for a smoother, more quiet drive operation, reducing vibrations in the passenger compartment.

OTC 6660 Compression Test Adapter - Use with OTC 5021 diesel engine compression gauge. Works on 2003-2009 Ford vans and trucks with 6.0L diesel engines.

Harmonic Balancer Puller Kit

6675 OTC Timing Belt Wrench GM - Designed to fit the adjuster on Chevy Aveo, 2002 - 2011. Similar to J-42492-A.

6684 OTC Valve Spring Compressor - Designed to compress valve springs on a Ford 3V 4.6L & 5.4L.

OTC 6685 GM In-line 4-Cylinder Cam Tool Set - This set is designed to save the technician valuable time when working on GM 4-cylinder engines. This set is an actual improvement over the OE tools required, and they are easier to use.

OTC 6689 Chrysler / Jeep Cam Tool Set - The Chrysler/Jeep cam timing tools are provided to ensure correct cam timing when servicing timing belts, chains, head gaskets, or performing other valve train repairs. The 15 included tools are based on OE designs.

6749 OTC Engine Barring Socket GM - Designed to rotate engine on a Mack E7 and Cat 3208.

6770 OTC Ford 6.0L Diesel Service Tool Kit - Due to popular demand - we've kitted our selection of 6.0L Diesel Power Stroke Tools - combining OTC value with the convenience of storage. The tools included in OTC's 6770, help you diagnose pressure problems often associated with no starts and help you remove and replace common components like IPR's or EGR's, oil lines, glow plug harnesses and injector harnesses. No need to go digging through your toolbox - it's all right here in this kit.

OTC 6786 Oil Filter Cartridge Socket Set (6 piece) - For the popular cartridge style oil filters used today.

OTC 679 V-Belt Pulley Pulling Attachment - This attachment clamps down into V-groove to distribute load. Use with Grip-O-Matic® pullers or Push-Pullers.

68160 Titan 5/8in 3/8in Drive Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also
features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

68161 Titan 5/8in 3/8in Drive Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also
features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

68162 Titan 5/8in 3/8in Drive Extended Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also
features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

68163 Titan 3/4in 3/8in Drive Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

68164 Titan 13/16in 3/8in Drive Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

68165 Titan 13/16in 3/8in Drive Universal Joint Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips. These features, when coupled with the rugged, durable construction of these tools, help make tough jobs easier.

68166 Titan 14mm 3/8in Drive Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips. These features, when coupled with the rugged, durable construction of these tools, help make tough jobs easier.

68168 Titan 18mm 3/8in Drive Spark Plug Socket- Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

68170 Titan 9/16in 3/8in Drive Spark Plug Socket - Titan Socket Sets are available in a variety of drive sizes and socket styles. They feature durable, precise fitting sockets that are equipped with easy to read stamping for instant size identification. Each socket also features a knurled ring allowing for a secure grip in greasy or oily conditions. Titan ratchets feature a smooth ratcheting action, along with very comfortable grips.

OTC 6900 Ford F-150 Spark Plug Socket - This socket with it's unique design works on 2004–newer Ford F-150 pickup trucks with 5.4L 3-valve Triton V-8 engines.

OTC 6901 GM Oil Filter Wrench - This is a required tool to remove the oil filter cap from the oil pan to access the filter cartridge on the 1999 to 2002 Oldsmobile Intrigue and the 2001 to 2002 Oldsmobile Aurora with the 3.5L V6. 74 mm, 15 Flutes Applications: 1999-2002 Olds Intrigue and 2001-2002 Olds Aurora with 3.5L V6 engine. This is a required tool to remove the oil filter cap from the oil pan to access the filter cartridge. Similar to Kent-Moore No. J-29142.

OTC 6903 Ford / Mazda 2.3L Oil Socket - This oil socket was designed to fit the 76.5 mm oil filter on the new 2.3L engines used by Ford and Mazda.

OTC 6904 Hyundai / Kia 3.3L Oil Socket - This oil socket was designed to fit the 88.22 mm oil filter on the new 3.3L 6-cylinder engines used by Hyundai and Kia.

OTC 6905 Subaru Oil Filter Socket - This oil filter socket has 14 flutes and is 66.5 mm in size. It is designed to fit between the exhaust manifold and the oil filter for easy removal and installation of the filter.

OTC 6906 Toyota Avalon / Tundra 5.7L (65 mm with 14 Flutes) Oil Filter Socket

OTC 6908 Toyota Tundra 4.7L (73 mm with 14 Flutes) Oil Filter Socket

OTC 6914 Davco Diesel Filter Wrench - This wrench fits Davco Diesel filter models 232, 233 and 234 found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines.

OTC 6915 Davco Diesel Filter Wrench - This wrench fits Davco Diesel filter models 382 and 384  found on Catepillar, Cummins, Detroit Diesel, International, Mack, Mercedes-Benz, Volvo and other engines.

OTC 6916 Duramax Water Sensor Wrench - This tool is used to remove the water sensor on the fuel filter found on 2001 and newer Chevrolet and GMC trucks and vans with the 6.6L Duramax diesel engine.

OTC 6918 Ford Spark Plug Removal Tool (Triton 3V) - The unique design helps prevent breakage by locking the plug porcelain core to the plug hex allowing it to turn as one complete unit.

OTC 6931 Oxygen Sensor Socket - Works on all domestic and imported vehicles with oxygen sensors.

OTC 6974 Ford 6.0L Diesel Fan Clutch Wrench - This is a required tool to loosen or tighten the fan clutch located on the water pump.

OTC 6985 Mercedes-Benz and BMW Fan Clutch Service Kit

OTC 7011 Ball Hone Set (10 piece) - Ball Hones can be used for refinishing and resizing bores such as found in brake calipers, engine lifters, and u-joint yoke's. Also useful for any bearing or bushing application.

OTC 7011-1 Ball Hone - This ball hone is sized 0.375" SAE and 10 mm Metric.

OTC 7011-10 Ball Hone  - This ball hone is sized 1.50" SAE and 38 mm Metric.

OTC 7011-12 Ball Hone - This ball hone is sized 1.75" SAE and 44 mm Metric.

OTC 7011-14 Ball Hone -  This ball hone is sized 2.00" SAE and 51 mm Metric.

OTC 7011-2 Ball Hone -  This ball hone is sized 0.500" SAE and 13 mm Metric.

OTC 7011-3 Ball Hone -  This ball hone is sized 0.625" SAE and 16 mm Metric.

OTC 7011-4 Ball Hone -  This ball hone is sized 0.750" SAE and 19 mm Metric.

OTC 7011-5 Ball Hone -  This ball hone is sized 0.875" SAE and 22 mm Metric.

OTC 7011-6 Ball Hone -  This ball hone is sized 1.00" SAE and 25 mm Metric.

OTC 7011-8 Ball Hone - This ball hone is sized 1.25" SAE and 32 mm Metric.

OTC 7070A Truck Transmission Bearing Service Set - The set is designed to help you remove input shaft bearings and countershaft bearings, in both the main and auxiliary boxes of heavy-duty Fuller transmissions. It will also remove end yokes from 1600/1610–1810 series transmissions. The puller delivers 10 tons of mechanical power— essential force for working on big gearboxes.

OTC 7106 Cylinder Liner Height Gauge with Hold-Down Bar - This set lets you meet those exacting specifications necessary for optimum diesel engine performance. It accurately measures cylinder bore flatness and depth. The hold-down bar correctly seats the liner for accurate measurement of liner protrusion. The easy-to-read dial is in .001 inch graduations, 1.000" range.

OTC 7108 Transmission Timing Block Tool

OTC 7109 Transmission Timing Block Tool

OTC 7117 Caterpillar Fuel Injector Nozzle Puller - Designed to remove pencil nozzles on Cat engines. The tool applies straight, even pulling power through a bridge assembly and mechanical forcing screw. The job is done quickly— and without damage.

OTC 7118 Transmission Adapter Kit - Converts your OTC 1726 or 1735A engine stand into a transmission service stand. Kit replaces the adjustment arms of the stand to hold and position the transmission at work-bench height for repair.

OTC 7120A Drive Pulley Installer

OTC 7120B Drive Pulley Remover

OTC 7121 Fuel Injector Nozzle Puller - Designed to remove the pencil-type fuel injector nozzles used in many agricultural and construction engines. The slide hammer action gives a straight, even pull without damaging components.

OTC 7161 Cummins Engine Turning Tool - This tool makes easy work of manually rotating a Cummins 855 cubic inch engine. It's essential hardware when you're bringing pistons to top dead center to adjust injector timing.

OTC 7189 Oxygen Sensor Socket - This socket is designed for the removal and installation of oxygen sensors.

OTC 7196 Crank And Cam Seal Service Kit - Removes and installs camshaft and crankshaft seals on cars and truck/van/SUVs without damage.

7200-4 Assenmacher Specialty Tools GM Waterpump pin used with our 7200 (must purchase 2) - For use w/ #7200 Camshaft Pulley Holder. Applicable: Dodge® Durango & GM® Vortec engine; holds camshaft gears on [2000–2009] Dodge® Durango 4.7L [V8]; also holds GM® water pump pulley on 4.2L straight-6 Vortec engine. NOTE: Available separately, not included in #7200.

OTC 7209 GM Power Steering Pump Pulley Installer - This tool offers easy, damage-free installation of power steering pump pulleys.

OTC 7215 Exhaust Back Pressure Gauge - Now you can quickly read back pressure to determine the amount of restriction in an exhaust system with this Exhaust Back Pressure Gauge.

OTC 7362 GM Power Steering Pump Pulley Service Kit - Remove and install the power steering pump pulley easily and without damaging the pump shaft or pulley. Kit includes both the Remover and the Installer.

Vacuum is created quickly and efficiently by manual pump operation, offering superior mobility by eliminating the need for electricity or compressed air. The 07400 is ideal for draining fluids from reservoirs on boats, RVs, ATVs, snowmobiles, farm equipment or motorcycles.

OTC 7471A Cummins Engine Barring Tool - Need to manually rotate an engine? This Cummins Engine Barring Tool makes the job easy.

Checks for combustion leaks caused by bad head gaskets, cracked blocks, and cracked or warped heads. Fluid changes from blue to yellow when exposed to combustion gases from the radiator. Connect the hose to any vehicle vacuum line. Or, on tools made after June 2002, use the red adapter with a hand vacuum pump. Place tapered end of tool into radiator opening. With the engine running, the vehicle vacuum or the vacuum pump draws vapors through the indicating fluid for testing.

75630 Replacement Fluid

75730 Combustion Leak Detector Fluid For Diesel

Mercedes-Benz & BMW Fan Clutch Service Set

Astro Pneumatic's 7880 Water Pump Remover/Installation Socket is used to remove and install the water pump on Cadillac NorthStar 4.6 liter V-8 engines 1993 and Oldsmobile Aurora 4.0 liter V-8 engines 1997 and later.  With enhanced durability, it provides more strength and control in removing and replacing water pump impeller.

7880 IPA Standard Top Dead Center (TDC) Indicator 6.25″ (14mm Thread) - The Standard TDC Indicator enables a technician to accurately set a piston to Top Dead Center (TDC). Just remove the spark plug, screw in the gauge and rotate the engine while observing the radial marks on the sliding shaft and note the top of the piston stroke.

7885 Innovative Products 14mm to 18mm Spark Plug Thread Adapter - Adapts any 14mm spark plug thread to an 18mm hole.

7892 Innovative Products 14mm to 12mm Spark Plug Thread Adapter - Adapts any 14mm spark plug thread to a 12mm hole.

OTC 7928 Ford Valve Spring Compressor Tool - Compresses valve springs for quicker, easier camshaft, valve seal, valve spring, or retainer service—because you don’t have to remove the head from the engine first! It’s an OEM approved tool that you use with a 3/8" ratchet or breaker bar.

Shim Style Vlv Adj Tool/Toyota: This unique tool has been designed to allow for easy valve adjustment on most Toyota`s overhead camshaft engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action then moves the shim and its valve lifter down awayfrom the camshaft lobe. In this down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness.

Universal Valve Adjust Tool/10mm Jam Nut: Designed for a wide variety of cars with 10mm jam nut valve adjustment screws. This two in one tool features a window in its socket so the technician can see the position of the screwdriver blade holding the adjustment screw as the jam nut is tightened. The unique handle pivots from one side to the other, so the window is always visible. Made from heat treated chrome vanadium steel this tool comes with a soft grip handle

98037328 UView Dual-Chamber Tester For 560000 (Tool Only) See 98037321 for the Squeeze Bulb.

ALT34018 Assenmacher Specialty Tools Splined Socket for Holding Alternator Pulley's - Used for R & R of the free-wheel pulley on the alternator. Used in conjunction with #S 3054 X-10, LGT-50 and #S 1054TX T-50 sockets. Comparable: Mercedes #602 589 00 10 00. Comparable: VW #3400. Comparable: Volvo #9995760.

Flex Hone 1-1/4" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Flex Hone 1-1/8: Brake Cylinder: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Flex Hone 1/2" Small Engine

Flex Hone 1-3/4" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Flex Hone 2-1/2" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Flex Hone 2-1/4" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Flex Hone 2 3/4" Engine 180 Gr: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Flex Hone 3" Engine 180 Grit: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Flex Hone 3/4" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

5/8" Flex Hone 180 Grit: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

BMW5346 Assenmacher Specialty Tools BMW Oil & Trans Cooler Line Disconnect Tool - Power steering & transmission oil cooler line remover. Made of red-anodized aluminum. Applicable: [1999-2011] BMW® 3-Series & X5.

CKV7 3/8” Universal Fuel Check Valve

Heavy-duty grooved handle. Made in USA. Parts Wash Brush With 28" Hose. Injection molded Polypropylene handles, synthetic filaments for resistance to solvent cleaners. All metal parts are either stainless steel or brass for corrosion resistance. These are superior tools that will make each and every job easier and faster, saving both time and money.