Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Engine Tools > Engine Cylinder Hones

Engine Cylinder Hones

Sort By:
Page of 1
23530 Lisle Hard Stone Set 23530 Lisle Hard Stone Set

240 Grit Replacement Stones Replacement stones and pins. For use after re-boring only . Not for glaze breaking.

Price $8.85
2836 KD Tools 4" Replacement Stones (Fine Grit) 2836 KD Tools 4" Replacement Stones (Fine Grit)

For Hydraulic Cylinders

Price $13.51
3029-75 KD Tools Replacement Part: Three 2" Cylinder Hone Stones 3029-75 KD Tools Replacement Part: Three 2" Cylinder Hone Stones

KD Tools Replacement part: Three 2" Cylinder Hone Stones

Price $10.95
3157 KD Tools 3" Replacement Stones (Medium Grit) 3157 KD Tools 3" Replacement Stones (Medium Grit)

Use stones for 2833 Engine Cylinder Hone for general-purpose honing and glaze breaking. Medium grit no. 240.

Price $10.74
7011 OTC Ball Hone Set 7011 OTC Ball Hone Set

OTC 7011 Ball Hone Set (10 piece) - Ball Hones can be used for refinishing and resizing bores such as found in brake calipers, engine lifters, and u-joint yoke's. Also useful for any bearing or bushing application.

Price $347.96
7011-1 OTC Ball Hone 3/8" 7011-1 OTC Ball Hone 3/8"

OTC 7011-1 Ball Hone - This ball hone is sized 0.375" SAE and 10 mm Metric.

Price $37.18
7011-10 OTC Ball Hone 1 1/2" 7011-10 OTC Ball Hone 1 1/2"

OTC 7011-10 Ball Hone  - This ball hone is sized 1.50" SAE and 38 mm Metric.

Price $47.19
7011-12 OTC Ball Hone 1 3/4" 7011-12 OTC Ball Hone 1 3/4"

OTC 7011-12 Ball Hone - This ball hone is sized 1.75" SAE and 44 mm Metric.

Price $51.49
7011-14 OTC Ball Hone 2" 7011-14 OTC Ball Hone 2"

OTC 7011-14 Ball Hone -  This ball hone is sized 2.00" SAE and 51 mm Metric.

Price $52.92
7011-2 OTC Ball Hone 1/2" 7011-2 OTC Ball Hone 1/2"

OTC 7011-2 Ball Hone -  This ball hone is sized 0.500" SAE and 13 mm Metric.

Price $37.18
7011-3 OTC Ball Hone 5/8" 7011-3 OTC Ball Hone 5/8"

OTC 7011-3 Ball Hone -  This ball hone is sized 0.625" SAE and 16 mm Metric.

Price $40.04
7011-4 OTC Ball Hone 3/4" 7011-4 OTC Ball Hone 3/4"

OTC 7011-4 Ball Hone -  This ball hone is sized 0.750" SAE and 19 mm Metric.

Price $40.04
7011-5 OTC Ball Hone 7/8" 7011-5 OTC Ball Hone 7/8"

OTC 7011-5 Ball Hone -  This ball hone is sized 0.875" SAE and 22 mm Metric.

Price $42.92
7011-6 OTC Ball Hone 1" 7011-6 OTC Ball Hone 1"

OTC 7011-6 Ball Hone -  This ball hone is sized 1.00" SAE and 25 mm Metric.

Price $42.92
7011-8 OTC Ball Hone 1 1/4" 7011-8 OTC Ball Hone 1 1/4"

OTC 7011-8 Ball Hone - This ball hone is sized 1.25" SAE and 32 mm Metric.

Price $47.19
BC11418 Brush Research Flex Hone 1-1/4" Small Engine BC11418 Brush Research Flex Hone 1-1/4" Small Engine

Flex Hone 1-1/4" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $20.25
BC11818 Brush Research Flex Hone 1-1/8: Brake Cylinder BC11818 Brush Research Flex Hone 1-1/8" Brake Cylinder

Flex Hone 1-1/8: Brake Cylinder: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $19.25
BC1218 Brush Research Flex Hone 1/2" Small Engine BC1218 Brush Research Flex Hone 1/2" Small Engine

Flex Hone 1/2" Small Engine

Price $14.69
BC13418 Brush Research Flex Hone 1-3/4" Small Engine BC13418 Brush Research Flex Hone 1-3/4" Small Engine

Flex Hone 1-3/4" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $22.99
BC20018 Brush Research Flex Hone 2" Brake Cycle BC20018 Brush Research Flex Hone 2" Brake Cycle

Flex Hone 2" Brake Cycle

Price $23.99
BC21218 Brush Research Flex Hone 2-1/2" Small Engine BC21218 Brush Research Flex Hone 2-1/2" Small Engine

Flex Hone 2-1/2" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $29.49
BC21418 Brush Research Flex Hone 2-1/4" Small Engine BC21418 Brush Research Flex Hone 2-1/4" Small Engine

Flex Hone 2-1/4" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $25.49
BC23418 Brush Research Flex Hone 2 3/4" Engine 180 Gr BC23418 Brush Research Flex Hone 2 3/4" Engine 180 Gr

Flex Hone 2 3/4" Engine 180 Gr: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $30.99
BC30018 Brush Research Flex Hone 3" Engine 180 Grit BC30018 Brush Research Flex Hone 3" Engine 180 Grit

Flex Hone 3" Engine 180 Grit: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $36.99
BC3418 Brush Research Flex Hone 3/4" Small Engine BC3418 Brush Research Flex Hone 3/4" Small Engine

Flex Hone 3/4" Small Engine: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $16.25
BC5818 Brush Research 5/8" Flex Hone 180 Grit BC5818 Brush Research 5/8" Flex Hone 180 Grit

5/8" Flex Hone 180 Grit: A resilient, flexible honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures it to be self-centering, self-aligning to the bore, and self-compensating for wear.

Price $15.25
BC7818 Brush Research Flex Hone 7/8 Brake Cycle BC7818 Brush Research Flex Hone 7/8 Brake Cycle

Flex Hone 7/8 Brake Cycle

Price $16.99
GB31212 Brush Research Flex Hone 3 1/2" Std. Duty Eng GB31212 Brush Research Flex Hone 3 1/2" Std. Duty Eng

Flex Hone 3 1/2" Std. Duty Eng: The GB Series Flex-Hone tools are designed for bore diameters from 3-1/4" thru 4-5/8" and are 13 -1/2" OAL. These standard duty Flex-Hones tools are commonly used to finish and deglaze block cylinders or liners and represent a tremendous value on a cost per cylinder basis. Additional abrasive types and grits are available.

Price $48.99
GB41812 Brush Research Flex Hone 4 1/8' Std Duty Eng GB41812 Brush Research Flex Hone 4 1/8' Std Duty Eng

Flex Hone 4 1/8' Std Duty Eng: Standard Duty Engine 4-1/8" - Commonly used for block cylinders or liners, stationary diesel, oil and gas pipes, marine engine and may other applications.  The heavy duty tool is recommended for large diameter or high production applications.

Price $56.11
GBD30012 Brush Research Flex Hone 3" H.D. Engine GBD30012 Brush Research Flex Hone 3" H.D. Engine

Flex Hone 3" H.D. Engine: GBD-series abrasive bead style brushes for block cylinders or liners have globe-shaped abrasive points on an independent suspension for self-centering, self-aligning to the bore, and self-compensating for wear. This reduces set-up time and costs and the need for special operator training, as well as ensuring precise control of finish parameters.

Price $57.99
GBD31212 Brush Research Flex Hone 3 1/2 HD Engine GBD31212 Brush Research Flex Hone 3 1/2 HD Engine

Flex Hone 3 1/2 HD Engine: GBD-series abrasive bead style brushes for block cylinders or liners have globe-shaped abrasive points on an independent suspension for self-centering, self-aligning to the bore, and self-compensating for wear. This reduces set-up time and costs and the need for special operator training, as well as ensuring precise control of finish parameters.

Price $60.99
GBD33412 Brush Research Flex Hone 3 3/4 HD Engine GBD33412 Brush Research Flex Hone 3 3/4 HD Engine

Flex Hone 3 3/4 HD Engine: GBD-series abrasive bead style brushes for block cylinders or liners have globe-shaped abrasive points on an independent suspension for self-centering, self-aligning to the bore, and self-compensating for wear. This reduces set-up time and costs and the need for special operator training, as well as ensuring precise control of finish parameters.

Price $65.99
GBD40012 Brush Research Flex Hone 4" HD Engine GBD40012 Brush Research Flex Hone 4" HD Engine

Flex Hone 4" HD Engine: GBD-series abrasive bead style brushes for block cylinders or liners have globe-shaped abrasive points on an independent suspension for self-centering, self-aligning to the bore, and self-compensating for wear. This reduces set-up time and costs and the need for special operator training, as well as ensuring precise control of finish parameters.

Price $69.99
GBD41212 Brush Research Flex Hone 4 1/2" HD Engine GBD41212 Brush Research Flex Hone 4 1/2" HD Engine

Flex Hone 4 1/2" HD Engine: GBD-series abrasive bead style brushes for block cylinders or liners have globe-shaped abrasive points on an independent suspension for self-centering, self-aligning to the bore, and self-compensating for wear. This reduces set-up time and costs and the need for special operator training, as well as ensuring precise control of finish parameters.

Price $78.99
GBD41412 Brush Research Flex Hone 4 1/4" HD Engine GBD41412 Brush Research Flex Hone 4 1/4" HD Engine

Flex Hone 4 1/4" HD Engine: GBD-series abrasive bead style brushes for block cylinders or liners have globe-shaped abrasive points on an independent suspension for self-centering, self-aligning to the bore, and self-compensating for wear. This reduces set-up time and costs and the need for special operator training, as well as ensuring precise control of finish parameters.

Price $74.99
GBD50012 Brush Research Flex Hone 5" HD Engine GBD50012 Brush Research Flex Hone 5" HD Engine

Flex Hone 5" HD Engine: GBD-series abrasive bead style brushes for block cylinders or liners have globe-shaped abrasive points on an independent suspension for self-centering, self-aligning to the bore, and self-compensating for wear. This reduces set-up time and costs and the need for special operator training, as well as ensuring precise control of finish parameters.

Price $92.99
GBD60012 Brush Research Flex Hone 6" HD Engine GBD60012 Brush Research Flex Hone 6" HD Engine

Flex Hone 6" Hd Engine: GBD-series abrasive bead style brushes for block cylinders or liners have globe-shaped abrasive points on an independent suspension for self-centering, self-aligning to the bore, and self-compensating for wear. This reduces set-up time and costs and the need for special operator training, as well as ensuring precise control of finish parameters.

Price $107.99
PW-A Brush Research Brush With Hose For Parts Washer PW-A Brush Research Brush With Hose For Parts Washer

PW-A Brush Research Brush With Hose For Parts Washer. For parts washing sinks with circulating solvent systems. Features Injection molded Polypropylene handles, synthetic filaments for resistance to solvent cleaners. All metal parts are either stainless steel or brass for corrosion resistance. All tube fittings are manufactured to allow use on the most popular recirculating parts washers such as Enco, KleerFlo, Safety Kleen and others . The ergonomic styles will reduce any wrist strain and allow for increased pressure during cleaning. These are superior tools that will make each and every job easier and faster, saving both time and money.

Price $32.50
   
 
Engine Cylinder Hones