|
|
|
|
|
|
4083C OTC Single Acting Ram 6-1/8" 10-Ton
|
|
|
SINGLE ACTING RAM 6-1/8" 10-TON
|
|
|
|
|
|
|
|
|
|
10025C Omega 2 Ton Side Pump Hydraulic Bottle Jack
|
|
|
10025C Omega 2 Ton Side Pump Hydraulic Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10045C Omega 4 Ton Side Pump Hydraulic Bottle Jack
|
|
|
10045C Omega 4 Ton Side Pump Hydraulic Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10065B Omega 6 Ton Side Pump Hydraulic Bottle Jack
|
|
|
10065B Omega 6 Ton Side Pump Hydraulic Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10085C Omega 8 Ton Side Pump Hydraulic Bottle Jack
|
|
|
10085C Omega 8 Ton Side Pump Hydraulic Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10120 Omega 12 Ton Hydraulic In-Line Bottle Jack
|
|
|
10120 Omega 12 Ton Hydraulic In-Line Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas. Unique cross-type forged release valve assures positive load control. With a wide, rugged base providing stability and strength.
|
|
|
|
|
|
|
|
|
|
10125C Omega 12 Ton Side Pump Hydraulic Bottle Jack
|
|
|
10125C Omega 12 Ton Side Pump Hydraulic Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10129B Omega 12 Ton Side Pump Hydraulic Shorty Bottle Jack
|
|
|
10129B Omega 12 Ton Side Pump Hydraulic Shorty Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10200 Omega 20 Ton Hydraulic In-Line Bottle Jack
|
|
|
10200 Omega 20 Ton Hydraulic In-Line Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10205C Omega 20 Ton Side Pump Hydraulic Bottle Jack
|
|
|
10205C Omega 20 Ton Side Pump Hydraulic Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10208 Omega 20 Ton Hydraulic In-Line Shorty Bottle Jack
|
|
|
10208 Omega 20 Ton Hydraulic In-Line Shorty Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10209C Omega 20 Ton Side Pump Hydraulic Shorty Bottle Jack
|
|
|
10209C Omega 20 Ton Side Pump Hydraulic Shorty Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10300 Omega 30 Ton Side Pump Hydraulic Side Pump Bottle Jack
|
|
|
10300 Omega 30 Ton Side Pump Hydraulic Side Pump Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10461 OTC Foot Switch
|
|
|
OTC 10461 Foot Switch
|
|
|
|
|
|
|
|
|
|
10474 OTC 90° Elbow Fitting
|
|
|
OTC 10474 90° Elbow Fitting
|
|
|
|
|
|
|
|
|
|
10479 OTC 1/4" Pipe Plug
|
|
|
OTC 10479 1/4" Pipe Plug
|
|
|
|
|
|
|
|
|
|
10500 Omega 50 Ton Side Pump Hydraulic Bottle Jack
|
|
|
10500 Omega 50 Ton Side Pump Hydraulic Bottle Jack: Hydraulic system is protected from internal damage by a by-pass mechanism U.S Patent No. 5,946,912. Machined and polished cylinders with die-cut steel with die-cut threads provide non-abrasive leak-free, durable performance. Fabricated from hard-cast steel with heat-treated critical stress areas.
|
|
|
|
|
|
|
|
|
|
10645 OTC 45° Street Elbow
|
|
|
OTC 10645 45° Street Elbow
|
|
|
|
|
|
|
|
|
|
10647 OTC 90° Elbow
|
|
|
OTC 10647 90° Elbow
|
|
|
|
|
|
|
|
|
|
|
11565 OTC Pressure Gauge
|
|
|
Pressure Gauge
|
|
|
|
|
|
|
|
|
|
13120 Omega 6 Ton Toe Jack
|
|
|
13120 Omega 6 Ton Toe Jack: With a heat treated and chromed medium-carbon steel cylinder and chrome plated ram for longer seal life and optimum performance. A patented internal by-pass mechanism protects the hydraulic system.
|
|
|
|
|
|
|
|
|
|
13200 Omega 10 Ton Toe Jack
|
|
|
13200 Omega 10 Ton Toe Jack: With a heat treated and chromed medium-carbon steel cylinder and chrome plated ram for longer seal life and optimum performance. A patented internal by-pass mechanism protects the hydraulic system.
|
|
|
|
|
|
|
|
|
|
|
13828 OTC Long Nipple 3/8" Npt
|
|
|
OTC 13828 Long Nipple 3/8" Npt
|
|
|
|
|
|
|
|
|
|
1505B OTC Tools 5-Ton Stinger Service Jack
|
|
|
1505B OTC Tools 5-Ton Stinger Service Jack. A built-in safety overload prevents using the jack beyond its rated capacity. A convenient foot pedal speeds the lifting operation, handle lock and release control are located on top of the 40" spring-loaded handle. Handle can be locked into any position from vertical to horizontal. Lifting range: 6" to 22", reach: 47". Frame height: 7-3/4", floor space: 56" x 14-3/4".
|
|
|
|
|
|
|
|
|
|
1507B OTC 5 Ton Air Assist Service Jack
|
|
|
Bring the versatility of air-assist operation to your shop’s lifting tasks. Huge front wheels mounted in bearings provide trouble-free service life. Rugged steel frame members. Rear swivel casters make spotting the jack easy. Spring-loaded handle may be locked in three positions, from horizontal to vertical.
|
|
|
|
|
|
|
|
|
|
1510B OTC 10-Ton Service Jack
|
|
|
A built-in safety overload prevents using the jack beyond its rated capacity. Convenient foot pedal speeds the lifting operation. Handle lock and release control are located on top of the handle. Spring-loaded 43-1/4" handle can be locked into any position from vertical to horizontal.
|
|
|
|
|
|
|
|
|
|
1511B OTC Tools 10-Ton Air/Hydraulic Service Jack
|
|
|
10 Ton Air Assist Service Jack - Bring the versatility of air-assist operation to your shop’s lifting tasks. Huge front wheels mounted in bearings provide trouble-free service life. Rugged steel frame members. Rear swivel casters make spotting the jack easy. Spring-loaded handle may be locked in three positions, from horizontal to vertical.
|
|
|
|
|
|
|
|
|
|
1512 OTC 20 Ton Stinger Service Jack
|
|
|
OTC 1512 20 Ton Stinger Service Jack - Low-profile stance and extended height add to versatility. Huge metal wheels and swivel casters roll effortlessly on internal bearings.
|
|
|
|
|
|
|
|
|
|
1520 OTC Vehicle Lift System (2 Pc)
|
|
|
OTC 1520 Vehicle Lift System (2 Piece) - Mobile, tandem system is air-operated to handle your class 7 and 8 tractor lifting needs. No need to waste time re-blocking and making additional lifts for the clearance you need for under-vehicle service.
|
|
|
|
|
|
|
|
|
|
1521A OTC 1/2-Ton Transmission Jack
|
|
|
TC 1521A 1,000 lb. Capacity Low-Lift Transmission Jack - Universal mounting head, with adjustable brackets, tilts front to back and side to side. Height range: 6-1/2" to 29-1/2". Safety chains hold the load securely, even while moving about the shop.
|
|
|
|
|
|
|
|
|
|
1522A OTC Tools Tools 2000 Lbs. Stinger Low Hydraulic Transmission Jack
|
|
|
OTC1522A OTC Tools & Equipment 2000 lbs. Stinger® Low Hydraulic Transmission Jack is a rugged, stable unit is ideal for handling heavy transmissions. Includes adapter plate for Eaton®, Fuller®, and Road Ranger® transmissions. The low profile design gets under the lowest clearance trucks, making it ideal for clutch repair work. Features include a pump handle that rotates 360º for operator convenience and safety overload prevents use beyond its rated capacity. Height range 6-1/2” to 35”.
|
|
|
|
|
|
|
|
|
|
1540 OTC 4-Ton Forklift Jack
|
|
|
OTC 1540 4-Ton Forklift Jack - 8,000 lb. capacity with a low starting height of 2-5/8". Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces.
|
|
|
|
|
|
|
|
|
|
1543 OTC Stinger Brake Drum Dolly
|
|
|
OTC 1543 Brake Drum Dolly - Removes, installs, and transports truck brake drums without physically having to lift them. Works on all 15" and 16-1/2" drums found on most class 7 and 8 tractor and trailer brake systems. 6" height adjustment aids installation. Heavy-gauge steel construction, 8" tires, and 36" handle.
|
|
|
|
|
|
|
|
|
|
1545 OTC Tools Stinger 1,500 lb. Capacity Motorcycle Lift
|
|
|
OTC 1545 Motorcycle Lift features 17” long skids that will lift the largest, widest cruisers. The lowest clearance available, 3-1/2” at lowest level, with a wide lift range of 3-1/2” to 16-3/4”. The removable handle provides 360° access to load. Features also include foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety.
|
|
|
|
|
|
|
|
|
|
1572 OTC Tools Car Dolly - Pair
|
|
|
Innovative patent-pending design – clamps directly to pinch welds to prevent slippage during use. Features independent units that eliminate the need to adjust dolly width for different vehicle designs. Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame. Independent units eliminate the need to adjust dolly width for different vehicle designs. Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame. Universal design for use on all vehicle types without additional adapters. Each unit has a capacity of 1800 lbs. (3600 lbs., pair) with a low height of 9" and a high of 14". May be used with or without tires on the vehicle.
|
|
|
|
|
|
|
|
|
|
1580 OTC Tools 1500 Lbs. Stinger Easy Roller
|
|
|
OTC 1580 1,500 lb Easy Roller™ - The Stinger No. 1580 Easy Roller provides a technician with a simple and efficient method of moving a disabled vehicle around a shop environment. Just position an Easy Roller at each wheel of a vehicle weighing up to 6,000 lbs., and use the foot pedals to activate the hydraulic lift mechanisms.
|
|
|
|
|
|
|
|
|
|
1585A OTC Power Train Lift
|
|
|
OTC 1585A Power Train Lift - Ideal for engine and transaxle service. Supports up to 1,250 lbs. Compact design and swivel casters for easy maneuverability. Comes with tilting plate. Height range is 29-1/2" to 68-1/2".
|
|
|
|
|
|
|
|
|
|
1590 OTC 10-Ton Air Lift
|
|
|
OTC 1590 10-Ton Air Lift provides 10 tons of lift at 200 PSI air pressure. Adjustable lifting saddles and an extra wide stance for extra stability. Lifting range is 13" to 52". Automatic mechanical safety catch engages in five height positions.
|
|
|
|
|
|
|
|
|
|
1591B OTC 10-Ton Capacity Combination Air Lift
|
|
|
OTC 1591B 10-Ton Capacity Combination Air Lift and Support Stand This versatile air-powered lift includes an integrated pin-type stand, a wide lifting height range, an adjustable angle handle, and the peace of mind provided by the OTC Lifetime Warranty. Its wheels allow for easy mobility to get the 1591B to a heavy-duty or commercial vehicle to do the job.
|
|
|
|
|
|
|
|
|
|
1595 OTC Power Train Lift 2,500 Lb
|
|
|
OTC 1595 2,500 lb Capacity Power Train Lift - This lift will handle engine and transmission assemblies, gas tanks, drive axle assemblies, engine / transaxle assemblies, electric bus batteries, and more. Scissors-type design allows access to all four sides of a component.
|
|
|
|
|
|
|
|
|
|
16123 Omega 12 Ton Omni Bottle Jack
|
|
|
16123 Omega 12 Ton Omni Bottle Jack: Protected from internal damage by the patented by-pass mechanism. Fabricated from hard-cast steel with machined and polished cylinders and die-cut threads for a non-abrasive leak free jack. All critical stress points are reinforced for added durability and a wide rugged base for strength and stability.
|
|
|
|
|
|
|
|
|
|
16203 Omega 20 Ton Omni Bottle Jack
|
|
|
16203 Omega 20 Ton Omni Bottle Jack: Protected from internal damage by the patented by-pass mechanism. Fabricated from hard-cast steel with machined and polished cylinders and die-cut threads for a non-abrasive leak free jack. All critical stress points are reinforced for added durability and a wide rugged base for strength and stability.
|
|
|
|
|
|
|
|
|
|
|
1680 OTC 17 1/2- & 30-Ton Hydraulic Farm Implement Set
|
|
|
17 1/2- & 30-Ton Hydraulic Farm Implement Set
|
|
|
|
|
|
|
|
|
|
1723 OTC Two Point Engine Support Bar
|
|
|
OTC 1723 Engine Support Bar (2-Point) - Cutting edge, design self-centers load to prevent tipping on inclined surfaces. Smooth sliding legs adjust easily to different vehicle widths. PVC-coated support legs don't scratch vehicle surfaces. Spinner handle enables lightning fast adjustment.
|
|
|
|
|
|
|
|
|
|
1725 OTC Three Point Engine Support Bar
|
|
|
OTC 1725 Engine Support Bar (3-Point) features cutting edge, patent pending design self-centers load to prevent tipping on inclined surfaces. The smooth sliding legs adjust easily to different vehicle widths. PVC-coated support legs don't scratch vehicle surfaces and the “Quick Connect” third-point bar makes setup a snap. A spinner handle enables lightning fast adjustment.
|
|
|
|
|
|
|
|
|
|
1726A OTC 1000 Lb Engine Stand
|
|
|
OTC 1726A 1000 lb Capacity Engine Stand - A timesaver for passenger car and light truck engine rebuilding or repair. Four adjustable attachment arms make engine mounting fast and easy. Engine can be rotated a full 360° with a turn of the handle; a locking pin secures the work in any of eight positions.
|
|
|
|
|
|
|
|
|
|
1728 OTC 1000 Lbs. Capacity High-Lift Transmission Jack (Air Assisted)
|
|
|
OTC 1728 1,000 lb Capacity High-Lift Transmission Jack - Air assist first stage for speed; second stage is hydraulically actuated for precision. Height range is 34-1/2" to 75". Maximum tilt is 50° forward to 20° backward and 10° to either side. Lifetime Marathon Warranty.
|
|
|
|
|
|
|
|
|
|
1733A OTC 3-Ton Jack Stands (Pair)
|
|
|
OTC 1733A 3-Ton Capacity Ratcheting Jack Stands (Pair) - These jack stands feature a formed steel frame for strength and long life, and rolled base edges that resist sinking into soft ground or asphalt. Height range of 12-1/2" to 18-1/2".
|
|
|
|
|
|
|
|
|
|
1734A OTC Heavy-Duty Wheel Step
|
|
|
OTC 1734A Heavy-Duty Wheel Step - Tire-mounted wheel step provides quick, easy access to under-hood components. Fits heavy-duty vehicles (Class 7/8). 300 pound capacity. Installs in seconds; adjusts to fit 22-1/2" to 24" wheel sizes. Non-skid platform surface. OTC Lifetime Marathon Warranty®.
|
|
|
|
|
|
|
|
|
|
1735B OTC 2,000 lb. Capacity Heavy-Duty Motor-Rotor Repair Stand
|
|
|
Handles a wide variety of engines, transmissions, torque converters, and rear axles from trucks, tractors, and construction machinery. The 50:1 ratio gearbox allows full rotation of mounted unit with just a turn of the crank and locks in position. Easily maneuvered when loaded To ensure engine stability in all positions, this repair stand is equipped with a positive-crank handle locking mechanism. Twin-post design, featuring laterally adjustable, 3-position outboard support; provides an extremely stable work-holding unit. Locking rear wheels anchor stand in position.
|
|
|
|
|
|
|
|
|
|
1736A OTC 6-Ton Jack Stand (Pair)
|
|
|
OTC 1736A 6-Ton Jack Stand (Pair) - These jack stands feature a formed steel frame for strength and long life, and rolled base edges that resist sinking into soft ground or asphalt. Height range of 15-1/2" to 24-1/2".
|
|
|
|
|
|
|
|
|
|
1740 OTC Basic Hendrickson Set
|
|
|
Basic Tooling Set - This is the basic tooling set for servicing center and end beam bushings. It does not include the hydraulic pump or gauge. If you are already equipped with hydraulics, you can be replacing bushings right away! (Does not include tooling for hanger tube or end plug adapter removal.) 1740 tooling setup for end bushing installation. For 340 thru 450 Series Hendrickson Suspensions.
|
|
|
|
|
|
|
|
|
|
1741 OTC Hendrickson Service Set
|
|
|
Hendrickson Service Set with Hydraulics (hydraulic pump 4062) - The method Hendrickson recommends for suspension service. You get the No. 1740 basic set, plus OTC’s No. 4062 two-stage electric/hydraulic pump with remote hand switch, a No. 9653 pressure gauge, hose half coupler, and 80-ton single-acting ram. (Tooling for hanger tube or end plug adapter removal not included.) For 340 - 450 series Hendrickson suspensions.
|
|
|
|
|
|
|
|
|
|
1742 OTC Hendrickson Service Set
|
|
|
Hendrickson Service Set with Hydraulics (hydraulic pump 4031)- The preferred method for servicing center and end beam bushings. You get the complete No. 1740 basic set, plus OTC’s No. 4031 two-stage electric/hydraulic pump with remote hand switch, a No. 9654 pressure gauge, hose half coupler, and 80-ton single-acting ram. (Tooling for hanger tube or end plug adapter removal not included.) For 340 - 450 series Hendrickson suspensions.
|
|
|
|
|
|
|
|
|
|
1745 OTC End Bushing Adapter Puller Set
|
|
|
End Bushing Adapter Puller Set - Set contains everything needed to remove end bushing adapter plugs in 380 thru 440 series suspensions. The plugs have to be removed prior to end bushing replacement. The set is complete in a handy plastic case. For use with 1740 series tooling sets (order separately).
|
|
|
|
|
|
|
|
|
|
|
1748 OTC End Bushing Adapter Puller Set
|
|
|
End Bushing Adapter Puller Set
|
|
|
|
|
|
|
|
|
|
1750 OTC 6000 Lb Engine Stand
|
|
|
6000 Lb Engine Stand - 96-to-1 ratio worm and gear set rotates components 360°; handle locks in any position. Integral 12-ton jack raises the work to provide the swing radius needed for clearance. Two front wheels and two rear casters provide mobility. Universal adapter assembly permits use with a wide variety of mounting plates. Covered by OTC Lifetime Marathon Warranty®. Engine stand without universal engine adapter assembly.
|
|
|
|
|
|
|
|
|
|
1750A OTC 6000 Lb. Capacity Heavy-Duty Engine Stand
|
|
|
OTC 1750A 6000 lb. Revolver Diesel Engine Stand - 96 to 1 ratio worm and gear set rotates components a full 360°; handle locks in any position. Includes 205061 universal mounting plate for use with individual engine adapter plates.
|
|
|
|
|
|
|
|
|
|
1757 OTC Hendrickson Fabricated Bar Pin Adapter Set
|
|
|
Hendrickson Fabricated Bar Pin Adapter Set - Servicing bar pin end bushings used on Hendrickson equalizing beam tandem truck suspensions requires the use of special tooling.
|
|
|
|
|
|
|
|
|
|
1758 OTC Fuel Tank Handler
|
|
|
 OTC 1758 Fuel Tank Handler - Provides safe and efficient handling of fuel tanks; adjusts horizontally from 24" to 38" and vertically from 7" to 11" to service tanks up to 40 gallons. Universal adapter plate fits virtually all competitive transmission jacks in the market.
|
|
|
|
|
|
|
|
|
|
1763 OTC Hendrickson Center and End Bushing Service Set
|
|
|
1763 OTC Hendrickson Center and End Bushing Service Set - This set is required for bushing service on 500 and 700 series heavy-duty suspensions. It is intended for use with a 100-ton capacity shop press. It allows replacement of center and end bushings. For 500 & 700 series suspensions. Use with a shop press.
|
|
|
|
|
|
|
|
|
|
1767 OTC Hendrickson Quick Align Socket
|
|
|
Hendrickson PRIMAXX® Quick Alignment Socket - Used to adjust axle alignment on the Primaax air suspension systems. Works on Primaax models 230, 460, and 690 rear suspensions. Hendrickson has issued their approval of this tool.
|
|
|
|
|
|
|
|
|
|
1768 OTC Hendrickson Primaax Quick Alignment Socket Wrench
|
|
|
Hendrickson Primaax® Quick Alignment Socket Wrench - Used to torque cross tube end cap bolts and longitudinal torque rod top pad bolts. Reduces maintenance time by eliminating the need to remove the tires to gain access to the end cap bolt. Hendrickson has issued their approval of this tool.
|
|
|
|
|
|
|
|
|
|
1774B OTC 10 Ton Jack Stands (Pair)
|
|
|
OTC 1774B 10-Ton Capacity Jack Stands (Pair) - These ratcheting jack stands are highest quality steel and factory tested to ANSI PALD standards. The form-fit saddle design and 12" x 14" base ensures stability. Height range is 20" to 31-1/2".
|
|
|
|
|
|
|
|
|
|
1778B OTC Tools 12-Ton Jack Stand (Sold Each)
|
|
|
OTC 1778B 12-Ton Jack Stand (Sold Individually) - Spun steel base won't dig or sink into asphalt or sand. No. 1778B low stand support height range is 19" to 29-1/2".
|
|
|
|
|
|
|
|
|
|
1779B OTC Tools 12-Ton Capacity High Jack Stand
|
|
|
OTC 1779B 12-Ton High Jack Stand - Spun steel base won't dig or sink into asphalt or sand. Stand support height range is 33-3/4" to 44-1/4".
|
|
|
|
|
|
|
|
|
|
1780 OTC 22 Ton Jack Stands (Pair)
|
|
|
OTC 1780 22-Ton Capacity Jack Stands (Pair) - These heavy duty jack stands are capable of supporting loads up to 44,000 lbs to keep mechanics safe while working under the heavy load. With features like: Minimum height 13-7/8", Maximum height 19-7/8", Pin-style (non-ratchet) three positions, 3" intervals, Reinforced collar to meet newest ANSI PALD test standards, Saddle size 3" x 3-3/4" and 11" flat base prevents sinking into the surface.
|
|
|
|
|
|
|
|
|
|
1781B OTC 4000 Lb Tripod Stand - Sold Singly
|
|
|
OTC 1781B 4,000 lb Capacity Tripod Stand - Sold Individually - This is an ideal support stand for under car maintenance with a height range of 65-3/4" to 74-5/8". An ACME take-up screw precisely positions and secures the support stand in place.
|
|
|
|
|
|
|
|
|
|
1783 OTC Tools 20-Ton Adjustable Support Jack Stand
|
|
|
OTC 1783 Heavy-Duty 20-Ton Capacity Adjustable Support - This Heavy-Duty 20-Ton Capacity with Adjustable Support is designed for the really big service jobs. Rugged steel construction, and large 15-1/2" square base will satisfy support requirements up to 40,000 lbs.
|
|
|
|
|
|
|
|
|
|
1784D OTC 12 Ton Ratcheting Jack Stands (Pair)
|
|
|
1784D OTC 12 Ton Jack Stands (Pair) Formed and welded steel base for strength; self-locking ratchet handle cannot be released under load. Durable baked enamel finish resists corrosion. Stands conform to ANSI PALD load rating standard; factory tested before shipment. Base: 12-1/8" x 10-7/8", Height range: 17-1/2" to 27-1/2", 12 adjustment positions.
|
|
|
|
|
|
|
|
|
|
1793A OTC Tools Air Assisted 1000 Lbs. Capacity Stinger Hi-Lift Transmission Jack
|
|
|
OTC 1793A 1,000 lb Capacity High-Lift Transmission Jack - Universal saddle tilts front to back and side to side; features adjustable corner brackets and safety chain for optimum positioning of the load. Flash-chromed rams inhibit rust from entering the hydraulic system.
|
|
|
|
|
|
|
|
|
|
1794A OTC Tools Air Assisted 1000 Lbs. Capacity Stinger Transmission Jack
|
|
|
OTC 1794A Air-Assisted 1,000 lb Capacity High-Lift Transmission Jack - Air-assist primary stage for rapidly raising the mounting head, activated by depressing foot pedal. Hydraulic secondary stage for precise operator control, activated by a hand pump to raise the load, and a release knob to lower the load.
|
|
|
|
|
|
|
|
|
|
1805 OTC Tools 1-Ton Load-Rotor Positioning Slings
|
|
|
OTC 1805 2,000 lb Capacity Load-Rotor® Sling - Use with a crane or hoist. Engine, transmission, or other component is tilted or leveled by turning sling's 5/8" hex drive end with a common speed handle and socket. Makes engine removal and installation a snap, even in close quarters. Has 56-1/2" long chain (1/4") and hook assembly with forged swiveling hook on each end. Pair of special mounting brackets included.
|
|
|
|
|
|
|
|
|
|
1806 OTC 4000 Lb. Load-Rotor Sling
|
|
|
OTC 1806 4,000 lb Capacity Load-Rotor® Sling - Use with a crane or hoist. Engine, transmission, or other component is tilted or leveled by turning sling's 5/8" hex drive end with a common speed handle and socket. Makes engine removal and installation a snap, even in close quarters. Has 65-3/4" long chain (5/16") and hook assembly with forged swiveling hook on each end. Pair of special mounting brackets included.
|
|
|
|
|
|
|
|
|
|
1812 OTC 6000 Lb. Load Tilter
|
|
|
OTC 1812 Load Leveler - Improved design over conventional spreader bars. Carriage on main support beam moved by turning lead screw; this permits fine adjustment of the tilt angle of component being lifted. Turn lead screw manually or with air-powered tools.
|
|
|
|
|
|
|
|
|
|
18125 Omega 12 Ton Hydraulic Air / Manual Bottle Jack
|
|
|
18125 Omega 12 Ton Hydraulic Air / Manual Bottle Jack: Reduce wait time for lifting and reduce effort by the mechanic with an air actuated bottle jack. With a patented and powerful air turbo motor, safely and effortlessly raise the load, with a patented internal by-pass device to prevent over pressure damage to the jack's internals. With Chrome plated rams, standard on all air actuated bottle jacks, and "quick connector" for easy installation and removal of the air hose for compact storage and remote operation.
|
|
|
|
|
|
|
|
|
|
18126C Omega 12 Ton Hydraulic Air / Manual Bottle Jack
|
|
|
18126 Omega 12 Ton Hydraulic Air / Manual Bottle Jack: Reduce wait time for lifting and reduce effort by the mechanic with an air actuated bottle jack. With a patented and powerful air turbo motor, safely and effortlessly raise the load, with a patented internal by-pass device to prevent over pressure damage to the jack's internals. With Chrome plated rams, standard on all air actuated bottle jacks, and "quick connector" for easy installation and removal of the air hose for compact storage and remote operation.
|
|
|
|
|
|
|
|
|
|
1813 OTC 6000 Lb. Floor Crane W/Hand Pump
|
|
|
OTC 1813 6,000 lb Capacity Heavy-Duty Crane - Telescoping boom adjusts to three different lengths for three different weight capacities. Boom swivels for vertical and lateral positioning. Equipped with two speed hydraulic pump for rapid, easy lifting. Legs extend to straddle the biggest tires. Usable reach is almost 92". Steering dolly for easy maneuverability also serves as floor lock.
|
|
|
|
|
|
|
|
|
|
1814 OTC 6,000 Ib. Capacity Mobile Lifting Crane Electric/Hydraulic
|
|
|
The OTC 1814 6,000 Ib. capacity retractable leg mobile floor crane equipped with No. 61399* electric / hydraulic (115V) pump with remote motor control. Three boom positions give you capacities of 4,000, 5,000, and 6,000 Ibs. - enough to lift the biggest engines and, in many cases, the transmission right along with the engine. A unique and useful feature is the boom swivel. Fully extended (4,000 Ib. cap.), you can swing the boom a full 3 ft. In the 6,000 Ib. cap. position you can achieve a swing of 26".
|
|
|
|
|
|
|
|
|
|
1819 OTC 2200 Lb. Capacity Floor Crane
|
|
|
OTC 1819 2,200 lb Capacity Heavy-Duty Crane - Space-saving fold-away feature for storage. Adjustable leg spread for "close-in" work. Telescoping boom extension for added reach. Equipped with 2-speed hydraulic hand pump. 16-7/8" lifting chain.
|
|
|
|
|
|
|
|
|
|
1820 OTC 4400 Lbs. Floor Crane
|
|
|
OTC 1820 4,400 lb Capacity Heavy-Duty Crane - Space-saving fold-away feature for storage. Adjustable leg spread for "close-in" work. Telescoping boom extension for added reach. Equipped with 2-speed hydraulic hand pump. 18-3/8" lifting chain.
|
|
|
|
|
|
|
|
|
|
18204C Omega 20 Ton Air Bottle Jack Forged Base
|
|
|
18204C Omega 20 Ton Air Bottle Jack Forged Base. Effortless air operation will greatly reduce operator fatigue and speed up the efficiency of garage work. A compact yet powerful Air Turbo Motor is equipped to raise the load to the desired height efficiently, effortlessly, and safely a built-in by-pass device protects hydraulic system from over pumping damage. Versatile “Quick Connector” design provides for easy removal of air hose from air motor allowing compact storage or remote operation. All air bottle jacks have chrome plated rams.
|
|
|
|
|
|
|
|
|
|
18205 Omega 20 Ton Hydraulic Air / Manual Bottle Jack
|
|
|
18205 Omega 20 Ton Hydraulic Air / Manual Bottle Jack: Reduce wait time for lifting and reduce effort by the mechanic with an air actuated bottle jack. With a patented and powerful air turbo motor, safely and effortlessly raise the load, with a patented internal by-pass device to prevent over pressure damage to the jack's internals. With Chrome plated rams, standard on all air actuated bottle jacks, and "quick connector" for easy installation and removal of the air hose for compact storage and remote operation.
|
|
|
|
|
|
|
|
|
|
18206C Omega 20 Ton Air-Manual Bottle Jack With Return Springs
|
|
|
18206C Omega 20 Ton Hydraulic Air / Manual Bottle Jack: Reduce wait time for lifting and reduce effort by the mechanic with an air actuated bottle jack. With a patented and powerful air turbo motor, safely and effortlessly raise the load, with a patented internal by-pass device to prevent over pressure damage to the jack's internals. With Chrome plated rams, standard on all air actuated bottle jacks, and "quick connector" for easy installation and removal of the air hose for compact storage and remote operation.
|
|
|
|
|
|
|
|
|
|
18209 Omega 20 Ton Low Profile Hydraulic Air / Manual Bottle Jack Welded
|
|
|
18209 Omega 20 Ton Low Profile Hydraulic Air / Manual Bottle Jack Welded: Reduce wait time for lifting and reduce effort by the mechanic with an air actuated bottle jack. With a patented and powerful air turbo motor, safely and effortlessly raise the load, with a patented internal by-pass device to prevent over pressure damage to the jack's internals. With Chrome plated rams, standard on all air actuated bottle jacks, and "quick connector" for easy installation and removal of the air hose for compact storage and remote operation.
|
|
|
|
|
|
|
|
|
|
1821 OTC Oil Filter Crusher Air Powered
|
|
|
OTC 1821 10-Ton Air Operated Oil Filter Crusher - Crushes up to four automotive filters at one time, in just 20 seconds. 100% air operation eliminates electrical connections. The generous size crushing chamber (9" high) easily accommodates the largest automotive spin-on filters on the market.
|
|
|
|
|
|
|
|
|
|
1822 OTC 10,000 Lb. Load Rotor
|
|
|
OTC 1822 10,000 lb Capacity Load-Rotor® Load Leveler
|
|
|
|
|
|
|
|
|
|
1824A OTC Tools 20-Ton Hydraulic Shop Press
|
|
|
1824A OTC Tools 20-Ton Hydraulic Shop Press - Economical press for bending, pressing, and straightening work. Works great for removal and installation of gears, bearings, and bushings. 20-ton bottle jack with 7-1/2" stroke.
|
|
|
|
|
|
|
|
|
|
18302C Omega 30 Ton Hydraulic Air / Manual Bottle Jack
|
|
|
18302C Omega 30 Ton Hydraulic Air / Manual Bottle Jack: Reduce wait time for lifting and reduce effort by the mechanic with an air actuated bottle jack. With a patented and powerful air turbo motor, safely and effortlessly raise the load, with a patented internal by-pass device to prevent over pressure damage to the jack's internals. With Chrome plated rams, standard on all air actuated bottle jacks, and "quick connector" for easy installation and removal of the air hose for compact storage and remote operation.
|
|
|
|
|
|
|
|
|
|
1833 OTC Tools 25-Ton Shop Press
|
|
|
OTC 1833 25-Ton Shop Press - Tough, economical press is ideal for pressing rear axle bearings, piston pins, and much more. Large 30" x 46" work area under ram makes positioning of even bulky work easy. Press bed is easily raised and lowered by a dependable lifting mechanism. Press complete with No. 4002 hydraulic hand pump; No. 9652 gauge; No. 24815 tee; No. 9767 hose (1/4" ID x 6'); hydraulic ram No. 51426 with 6-1/4" stroke; and 42733-WH2 pump mounting bracket.
|
|
|
|
|
|
|
|
|
|
18502 Omega 50 Ton Hydraulic Air Actuated Bottle Jack
|
|
|
18502 Omega 50 Ton Hydraulic Air Actuated Bottle Jack: Reduce wait time for lifting and reduce effort by the mechanic with an air actuated bottle jack. With a patented and powerful air turbo motor, safely and effortlessly raise the load, with a patented internal by-pass device to prevent over pressure damage to the jack's internals. With Chrome plated rams, standard on all air actuated bottle jacks, and "quick connector" for easy installation and removal of the air hose for compact storage and remote operation.
|
|
|
|
|
|
|
|
|
|
1879 OTC Tools Accessory Kit For Shop Presses - 5 Pc.
|
|
|
OTC 1879 Accessory Set 12-Ton & 20-Ton Bottle Jack Presses – This accessory set is designed to be utilized in conjunction with OTC 12-ton and 20-ton bottle jack presses.
|
|
|
|
|
|
|
|
|
|
1880 OTC Tools 17-1/2-Ton Capacity Press Accessory Set
|
|
|
OTC 1880 17-1/2-Ton Press Accessory Set - Adapters and accessories attach to ram's forcing screw or are used on press bed to support work.
|
|
|
|
|
|
|
|
|
|
1881 OTC Tools Accessory Set For 25-Ton Capacity Presses
|
|
|
OTC 1881 Accessory Set for 25-Ton Capacity Presses - Accessories attach to ram's forcing screw or support work on the press bed.
|
|
|
|
|
|
|
|
|
|
1890 OTC Tools Pair Of V-Blocks For 10-Ton Presses
|
|
|
OTC 1890 Pair Of V-Blocks For 10-Ton Presses
|
|
|
|
|
|
|
|
|
|
18992 Omega 100 Ton Hydraulic Air Actuated Bottle Jack
|
|
|
18992 Omega 100 Ton Hydraulic Air Actuated Bottle Jack: Reduce wait time for lifting and reduce effort by the mechanic with an air actuated bottle jack. With a patented and powerful air turbo motor, safely and effortlessly raise the load, with a patented internal by-pass device to prevent over pressure damage to the jack's internals. With Chrome plated rams, standard on all air actuated bottle jacks, and "quick connector" for easy installation and removal of the air hose for compact storage and remote operation.
|
|
|
|
|
|
|
|
|
|
2002 OTC 2000Lb Stinger Folding Crane
|
|
|
OTC 2002 2,000 lb Capacity Folding Floor Crane - This 2,000 lb floor crane folds for compact storage, has a reach of 24" to 36" with 3-1/2" front wheels and 5-7/8" rear casters.
|
|
|
|
|
|
|
|
|
|
2004 OTC Tools 4000 Lbs. Stinger Folding Engine Crane
|
|
|
OTC 2004 4,000 lb Capacity Folding Floor Crane - This 4,000 lb floor crane folds for compact storage, has a reach of 25" to 46" with 3-1/2" front wheels and 5-7/8" rear casters.
|
|
|
|
|
|
|
|
|
|
2006-B56 GoJak Black Caster For 500 Series
|
|
|
GoJak® Caster Assembly 4" - Black Caster For 500 Series
|
|
|
|
|
|
|
|
|
|
201454 OTC 3/4" Adapter
|
|
|
OTC 201454 Ram Pushing Adapter - With a thread pitch of 1"-8 and a 3/4" diameter shank, this ram pushing adapter for use with OTC 17-1/2-Ton presses.
|
|
|
|
|
|
|
|
|
|
2015A OTC Tools 1500 Lbs. Capacity Underhoist Stand
|
|
|
OTC 2015A 1,500 lb Capacity Underhoist Stand - Keep yourself safe and the load in position and stable while it is on the hoist or floor crane. With a lifting height of 53-1/2" to 80-1/4", a saddle that measures 5-1/4" x 1-1/4" and an 11-7/8" diameter base.
|
|
|
|
|
|
|
|
|
|
2016A OTC Tools 1500 Lbs. Capacity Underhoist Stand With Foot Pedal
|
|
|
OTC 2016A 1,500 lb. Capacity Underhoist Stand with Foot Pedal - Keep yourself safe and the load in position and stable while it is on the hoist or floor crane. With a foot pedal actuated lifting mechanism, lifting height of 53-1/4" to 80-3/4", a saddle that measures 5-1/4" x 1-1/4", and an 11-78" diameter base.
|
|
|
|
|
|
|
|
|
|
2018A OTC Tools 2-Ton Tripod Stand
|
|
|
OTC 2018A 4,000 lb Capacity Underhoist Tripod Stand - Keep yourself safe and the load in position and stable while it is on the hoist or floor crane. With a lifting height of 56-1/4" to 85", a saddle measures 3-1/16" x 3-1/16" and a 24-1/8" x 24-1/8" x 24-1/8" tripod base.
|
|
|
|
|
|
|
|
|
|
|
201916 OTC Adapter Nut Assembly
|
|
|
Adapter Nut Assembly
|
|
|
|
|
|
|
|
|
|
|
201917 OTC Adapter Nut
|
|
|
Adapter Nut
|
|
|
|
|
|
|
|
|
|
|
201920 OTC Interchange Adapter
|
|
|
Interchange Adapter
|
|
|
|
|
|
|
|
|
|
201923 OTC 1/2" Adapter
|
|
|
OTC 201923 Ram Pushing Adapter - With a thread pitch of 1"-8 and a 1/2" diameter shank, this ram pushing adapter for use with OTC 17-1/2-Ton presses.
|
|
|
|
|
|
|
|
|
|
|
202180 OTC Threaded Adapter
|
|
|
Threaded Adapter
|
|
|
|
|
|
|
|
|
|
2036PB OTC Protective Puller Blanket
|
|
|
OTC 2036PB Protective Blanket (20" x 36") - Wrap around pulling, pressing, and other high-force jobs to protect you and your employees from work-related injuries as much as possible. Made of high tensile, tear resistant ballistic nylon – similar to military flak jackets – that, when tested, withstood the shattering of a neck-down grade 8 bolt without any visible damage.
|
|
|
|
|
|
|
|
|
|
205049 OTC Lifting Sling 2000Lb Capacity
|
|
|
Lifting Sling 2000Lb Capacity
|
|
|
|
|
|
|
|
|
|
205050 OTC Lifting Sling 4000Lb Capacity
|
|
|
Lifting Sling 4000Lb Capacity
|
|
|
|
|
|
|
|
|
|
205058 OTC Mounting Plate For Detroit Engine
|
|
|
OTC 205058 Detroit Diesel Engine Adapter Mounting Plate - Detroit Diesel Engine Adapter Mounting Plates for 1750A and 1750 diesel engine stands. For Detroit Diesel engines: 53 series in-line 6-cylinder, 6V & 8V; 71 series in-line 6-cylinder, 6V, 8V, & 12V; 92 series 6V & 8V; 8.2 liter V-8. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
205059 OTC Mounting Plate For Cummins Engine
|
|
|
OTC 205059 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Cummins engines: All NH, NTC, NTE, N14 855 series in-line 6 cyl.; 378 series V6; 504, 555, and 903 series V8; KT 1150 series in-line 6 cyl., L10. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
205060 OTC Mounting Plate For Cat Engine
|
|
|
OTC 205060 Caterpillar Engine Adapter Mounting Plate - Caterpillar Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Caterpillar engines: Nos. 1673, 1674, 1693, 3306, and 3406 in-line 6 cyl.; Nos. 1100, 3208, 3408 V8 and 3406E. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
205061 OTC Universal Adapter
|
|
|
Universal Adapter - Required for mounting engine adapter plates to the 1750A and 1750 Engine Stands.
|
|
|
|
|
|
|
|
|
|
205101 OTC Mounting Plate For Mack Engine
|
|
|
OTC 205101 Mack Engine Adapter Mounting Plate - Mack Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Mack engines: All 672, 673, 675, & 711 series in-line 6 cyl. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
|
205377 OTC Puller Attachment
|
|
|
Puller Attachment
|
|
|
|
|
|
|
|
|
|
206386 OTC Mounting Plate For I.H.C. Engine
|
|
|
OTC 206386 International Harvester / Ford Engine Adapter Mounting Plate - International Harvester / Ford Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For International Harvester engines: DT-466, DT-360, DT408, and 530 in-line 6 cylinder; DV-550, MV-404, MV-446, V304, V345, V392, 4-152, 4-196, 4-194; 9.0 liter and T444E V8. Ford 6.9L, and 7.3L DIT. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
206629 OTC Engine Mounting Plate
|
|
|
OTC 206629 Mack Engine Adapter Mounting Plate - Mack Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. For Mack engines: V8 1000, E6, & E7 in-line 6 cyl. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
|
207025 OTC Spacer Ring
|
|
|
Spacer Ring
|
|
|
|
|
|
|
|
|
|
|
207027 OTC Screw
|
|
|
Screw
|
|
|
|
|
|
|
|
|
|
|
207030 OTC Hand Tap - 7/8" - 14
|
|
|
Hand Tap - 7/8" - 14
|
|
|
|
|
|
|
|
|
|
|
207039 OTC Hex Nut
|
|
|
Hex Nut
|
|
|
|
|
|
|
|
|
|
207436 OTC 2 Gallon Reservoir Kit
|
|
|
2 Gallon Reservoir Kit
|
|
|
|
|
|
|
|
|
|
208160 OTC Mounting Plate For Allison Transmission
|
|
|
OTC 208160 Detroit Allison Transmission Mounting Plate - Detroit Allison Transmission Mounting Plates for 1750A and 1750 diesel engine stands. Allison transmission mounting plate for transmission Nos. AT500, MT600, MT 6-speed, VH, VS, and V730. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
|
208349 OTC Hendrickson Clamp Assembly
|
|
|
Hendrickson Clamp Assembly
|
|
|
|
|
|
|
|
|
|
|
208406 OTC Ram Base
|
|
|
Ram Base
|
|
|
|
|
|
|
|
|
|
|
211407 OTC 17-1/2 Ton Winch Kit For 1825 And 1827
|
|
|
17-1/2 Ton Winch Kit For 1825 And 1827
|
|
|
|
|
|
|
|
|
|
212653 OTC GM TPI Adapter
|
|
|
GM TPI Adapter
|
|
|
|
|
|
|
|
|
|
|
21332 OTC 100 Ton Pushing Adapter
|
|
|
100 Ton Pushing Adapter
|
|
|
|
|
|
|
|
|
|
|
213896 OTC Reservoir Conversion Kit
|
|
|
Reservoir Conversion Kit
|
|
|
|
|
|
|
|
|
|
|
214081 OTC Breaker
|
|
|
Breaker
|
|
|
|
|
|
|
|
|
|
215009 OTC Inline Oil Lubricator
|
|
|
OTC 215009 In-Line Oil Lubricator - Add this unit to quickly and easily to air line to meter precise flow of lubricant to air motor. Unit has 1/4" NPT fitting.
|
|
|
|
|
|
|
|
|
|
215703 OTC V-Nose Adapter
|
|
|
V-Nose Adapter
|
|
|
|
|
|
|
|
|
|
216044 OTC Nissan Adapter
|
|
|
Nissan Adapter - 12" adapter cable for 1987 - 1995 Nissan models.
|
|
|
|
|
|
|
|
|
|
|
21669 OTC Tapped Insert
|
|
|
OTC 21669 Threaded Insert - This threaded insert has a thread pitch of 1"-8. Intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
|
21714 OTC Plain Insert
|
|
|
OTC 21714 Plain-Hole Insert - This plain-hole insert has a hole diameter of 1-1/16" and is intended for use with the OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
217687 OTC Cat. Engine Mounting Plate
|
|
|
OTC 217687 Caterpillar Engine Adapter Mounting Plate - Caterpillar Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 217687 – For Caterpillar 3114, 3116, and 3176 in-line 6 cyl. and C12 engines. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
218098 OTC Engine Mounting Plate - Cummins B
|
|
|
OTC 218098 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 218098 – For Cummins "B" series 5.9L in-line 6 cyl. engines. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
218099 OTC Engine Mounting Plate - Cummins C
|
|
|
OTC 218099 Cummins Engine Adapter Mounting Plate - Cummins Engine Adapter Mounting Plate for 1750A and 1750 diesel engine stands. No. 218099 – For Cummins "C" series 8.3L in-line 6 cyl. engines. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
218174 OTC Flywheel Handler
|
|
|
OTC 218174 Flywheel Handling Attachment - Flywheel handling attachment for use on OTC 5015 only.
|
|
|
|
|
|
|
|
|
|
218504 OTC Engine Mounting Plate
|
|
|
OTC 218504 Detroit Diesel Engine Adapter Mounting Plate - Detroit Diesel Engine Adapter Mounting Plates for 1750A and 1750 diesel engine stands. No. 218504 – For Detroit series 60 in-line 6-cylinder engines. Mounting plate includes all the necessary hardware and an engine application chart.
|
|
|
|
|
|
|
|
|
|
21872 OTC Plain Insert
|
|
|
OTC 21872 Plain-Hole Insert - This plain-hole insert has a hold diameter of 1-5/16". Intended for use with OTC 30-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
21873 OTC Tapped Insert
|
|
|
OTC 21873 Threaded Insert - This threaded insert has a thread pitch of 1-1/4"-7. Intended for use with OTC 30-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
22050C Omega 5 Ton Hydraulic Long Chassis Service Jack
|
|
|
22050C Omega 5 Ton Hydraulic Long Chassis Service Jack: With a saddle that is the largest allowed by ANSI in the category, and extra wide wheels for a solid stance and stability under load stress.
|
|
|
|
|
|
|
|
|
|
22051C Omega 5 Ton Hydraulic Air / Manual Long Chassis Service Jack
|
|
|
22051C Omega 5 Ton Hydraulic Air / Manual Long Chassis Service Jack: The wide stance and low center of gravity provide the optimum stability under heavy loads. Heavy gauge steel construction of the frame helps to prevent twisting, warping and distortion. Convenient foot pedal for fast no load lifts and a handle actuated release valve for precise metered control of lowering speed.
|
|
|
|
|
|
|
|
|
|
220972 OTC Tools Lifting Extension (Included With No. 5012A)
|
|
|
OTC 220972 Lifting Extension - Now included with No. 5012A, but can be purchased alone for use on older 5012As, is 3" long and has a 1" diameter.
|
|
|
|
|
|
|
|
|
|
22100C Omega 10 Ton Hydraulic Long Chassis Service Jack
|
|
|
22100C Omega 10 Ton Hydraulic Long Chassis Service Jack Features include a handle actuated release valve which provides metered control at any desired lowering speed. A wide stance and low center of gravity provides optimum stability under load stress. Heavy gauge, steel frame helps prevent distortion and twisting and a built-in by-pass device which protects the hydraulic system from over pumping damage.
|
|
|
|
|
|
|
|
|
|
22101C Omega 10 Ton Hydraulic Air / Manual Long Chassis Service Jack
|
|
|
22101C Omega 10 Ton Hydraulic Air / Manual Long Chassis Service Jack: The wide stance and low center of gravity provide the optimum stability under heavy loads. Heavy gauge steel construction of the frame helps to prevent twisting, warping and distortion. Convenient foot pedal for fast no load lifts and a handle actuated release valve for precise metered control of lowering speed.
|
|
|
|
|
|
|
|
|
|
|
221378 OTC Hand Tap
|
|
|
Hand Tap
|
|
|
|
|
|
|
|
|
|
22201 Omega 20 Ton Hydraulic Air / Manual Service Jack
|
|
|
22201 Omega 20 Ton Hydraulic Air / Manual Service Jack: The wide stance and low center of gravity provide the optimum stability under heavy loads. Heavy gauge steel construction of the frame helps to prevent twisting, warping and distortion. Convenient foot pedal for fast no load lifts and a handle actuated release valve for precise metered control of lowering speed.
|
|
|
|
|
|
|
|
|
|
222029 OTC 45° Replacement Tips
|
|
|
45° Replacement Tips
|
|
|
|
|
|
|
|
|
|
22203 Omega 20 Ton Hydraulic Air / Manual Service Jack
|
|
|
22203 Omega 20 Ton Hydraulic Air / Manual Service Jack: The wide stance and low center of gravity provide the optimum stability under heavy loads. Heavy gauge steel construction of the frame helps to prevent twisting, warping and distortion. Convenient foot pedal for fast no load lifts and a handle actuated release valve for precise metered control of lowering speed.
|
|
|
|
|
|
|
|
|
|
|
222618 OTC 6 Ft. Hose 1/4" Npt
|
|
|
6 Ft. Hose 1/4" Npt
|
|
|
|
|
|
|
|
|
|
|
223018 OTC Accessory Kit For 5079
|
|
|
Accessory Kit For 5079
|
|
|
|
|
|
|
|
|
|
223196 OTC Trans. Jack Adapter Kit
|
|
|
Trans. Jack Adapter Kit
|
|
|
|
|
|
|
|
|
|
22903 Omega Hydraulic Treadle Pump 91.5 Cu.In. 10,000 PSI Air Actuated
|
|
|
22903 Omega Hydraulic Treadle Pump 91.5 Cu.In. 10,000 PSI Air Actuated: Efficiently operates any single-acting ram up to 55 ton capacity in many industrial and construction applications. Made of lightweight, durable corrosion free aluminum with a built in pressure by-pass system to prevent overload operation, provides up to 10,000 psi with standard shop air supply pressure of 90-175 psi.
|
|
|
|
|
|
|
|
|
|
22903B Omega Hydraulic Treadle Pump 91.5 Cu.In. 10,000 PSI Air Actuated
|
|
|
22903B Omega Hydraulic Treadle Pump 91.5 Cu.In. 10,000 PSI Air Actuated: Efficiently operates any single-acting ram up to 55 ton capacity in many industrial and construction applications. Made of lightweight, durable corrosion free aluminum with a built in pressure by-pass system to prevent overload operation, provides up to 10,000 psi with standard shop air supply pressure of 90-175 psi.
|
|
|
|
|
|
|
|
|
|
22905 Omega Hydraulic Treadle Pump 122 Cu.In. 10,000 PSI Air Actuated
|
|
|
22905 Omega Hydraulic Treadle Pump 122 Cu.In. 10,000 PSI Air Actuated: Efficiently operates any single-acting ram up to 55 ton capacity in many industrial and construction applications. Made of lightweight, durable corrosion free aluminum with a built in pressure by-pass system to prevent overload operation, provides up to 10,000 psi with standard shop air supply pressure of 90-175 psi.
|
|
|
|
|
|
|
|
|
|
22907 Omega 10,000 PSI Air Pump 231 Cu. In. (1 Gallon) Oil Capacity
|
|
|
22907 Omega 10,000 PSI Air Pump 231 Cu. In. (1 Gallon) Oil Capacity: Efficiently operates any single-acting ram up to 55 ton capacity in many industrial and construction applications. Made of lightweight, durable corrosion free aluminum with a built in pressure by-pass system to prevent overload operation, provides up to 10,000 psi with standard shop air supply pressure of 90-175 psi.
|
|
|
|
|
|
|
|
|
|
22910 Omega Portable Bead Breaker
|
|
|
22910 Omega Portable Bead Breaker: Constructed from rugged steel with a 5 inch opening, works on single and multiple rims. Will work with any 10,000 psi pump.
|
|
|
|
|
|
|
|
|
|
22953 Omega Bead Breaker Combo
|
|
|
22953 Omega Bead Breaker Combo: Constructed from rugged steel with a 5 inch opening, works on single and multiple rims. Efficiently operates any single-acting ram up to 55 ton capacity in many industrial and construction applications. Made of lightweight, durable corrosion free aluminum with a built in pressure by-pass system to prevent overload operation, provides up to 10,000 psi with standard shop air supply pressure of 90-175 psi.
|
|
|
|
|
|
|
|
|
|
231583 Hein-Werner Rear Caster For 93642 Jack
|
|
|
Rear Caster For 93642 Jack
|
|
|
|
|
|
|
|
|
|
23221C Omega 22 Ton Hydraulic Air Hydraulic Axle Jack
|
|
|
23221C Omega 22 Ton Hydraulic Air Hydraulic Axle Jack: User friendly with a self-returning spring to greatly reduce effort and fatigue.Inline air filter protects the air motor for longer life by trapping contaminants, air actuated operation is quick rated for capacity lifting.
|
|
|
|
|
|
|
|
|
|
23222C Omega 22 Ton Air Axle Jack
|
|
|
23222C Omega 22 Ton Air Axle Jack: User friendly with a self-returning spring to greatly reduce effort and fatigue.Inline air filter protects the air motor for longer life by trapping contaminants, air actuated operation is quick rated for capacity lifting.
|
|
|
|
|
|
|
|
|
|
23227 Omega 22/35 Ton 2 Stage Air Hydraulic Axle Jack
|
|
|
23227 Omega 22/35 Ton 2 Stage Air Hydraulic Axle Jack: Easily fits between the wheels of tandem axle vehicles, with its compact low profile design. Sturdy on piece handle and large steel wheels for ease in positioning and smooth moving. A metered control release valve located at the top of the handle, for safe and easy height adjustment away from the lift load.
|
|
|
|
|
|
|
|
|
|
23301C Omega 30 Ton Air / Hydraulic Axle Jack
|
|
|
23301C Omega 30 Ton Air / Hydraulic Axle Jack: User friendly with a self-returning spring to greatly reduce effort and fatigue.Inline air filter protects the air motor for longer life by trapping contaminants, air actuated operation is quick rated for capacity lifting.
|
|
|
|
|
|
|
|
|
|
234678 Hein-Werner Front Wheel For 93642
|
|
|
Front Wheel For 93642 Jack
|
|
|
|
|
|
|
|
|
|
23501 Omega 50 Ton Air / Hydraulic Axle Jack
|
|
|
23501 Omega 50 Ton Air / Hydraulic Axle Jack: User friendly with a self-returning spring to greatly reduce effort and fatigue.Inline air filter protects the air motor for longer life by trapping contaminants, air actuated operation is quick rated for capacity lifting.
|
|
|
|
|
|
|
|
|
|
23991 Omega 100 Ton Air / Hydraulic Axle Jack
|
|
|
23991 Omega 100 Ton Air / Hydraulic Axle Jack: User friendly with a self-returning spring to greatly reduce effort and fatigue.Inline air filter protects the air motor for longer life by trapping contaminants, air actuated operation is quick rated for capacity lifting.
|
|
|
|
|
|
|
|
|
|
|
24016 OTC Smooth Saddle
|
|
|
Smooth Saddle
|
|
|
|
|
|
|
|
|
|
|
24813 OTC Jack Screw
|
|
|
OTC 24813 Jack Screw - This jack screw has a thread pitch of 1"-8 and is 7" in length. Intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
24814 OTC Adjusting Crank
|
|
|
OTC 24814 Speed Crank - Compatible with the OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
24815 OTC Tee Connection
|
|
|
Tee Connection
|
|
|
|
|
|
|
|
|
|
|
24861 OTC Lifting Plate
|
|
|
Lifting Plate
|
|
|
|
|
|
|
|
|
|
|
25017 OTC Remote Control Hand Switch
|
|
|
Remote Control Hand Switch
|
|
|
|
|
|
|
|
|
|
25057 Omega 5 Ton Hydraulic Magic Lift Service Jack
|
|
|
25057 Omega 5 Ton Hydraulic Magic Lift Service Jack: Magic Lift offers a quicker lift and professional performance through its innovative design and heavy gauge construction with a rugged universal joint release valve. Metered release system allows for precision control of the lift load and the internals are protected with an built in by-pass device from over pumping damage.
|
|
|
|
|
|
|
|
|
|
25107 Omega 10 Ton Hydraulic Magic Lift Service Jack
|
|
|
25107 Omega 10 Ton Hydraulic Magic Lift Service Jack: Magic Lift offers a quicker lift and professional performance through its innovative design and heavy gauge construction with a rugged universal joint release valve. Metered release system allows for precision control of the lift load and the internals are protected with an built in by-pass device from over pumping damage.
|
|
|
|
|
|
|
|
|
|
2510A OTC Air / Hydraulic Pump
|
|
|
OTC 2510A Air / Hydraulic Pump - Ideal all-around power source develops 10,000 PSI at 100 PSI air pressure. With features like: a 2-stage release mechanism, internal relief valve, the ability to pump, hold, or release load with pedal control, 98 cu. in. of useable oil, a 1/4" NPT air Inlet and a 3/8" NPT oil port.
|
|
|
|
|
|
|
|
|
|
|
25653 OTC Ram Flat Base
|
|
|
Ram Flat Base
|
|
|
|
|
|
|
|
|
|
|
25664 OTC Threaded Connector
|
|
|
Threaded Connector
|
|
|
|
|
|
|
|
|
|
25919 OTC Hose Coupler
|
|
|
Hose Coupler
|
|
|
|
|
|
|
|
|
|
25931 OTC Jack Screw
|
|
|
OTC 25931 Jack Screw - This jack screw has a thread pitch of 1-1/4"-7 and is 9" in length. Intended for use with OTC 25 and 30-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
26022 Omega 2 Ton Hydraulic Aluminum Racing Jack
|
|
|
26022 Omega 2 Ton Hydraulic Aluminum Racing Jack: Easily get under that low profile performance car with this jack's 3 1/2" low pickup height. The all aluminum frame and 48" aluminum handle for strength and lighter weight with side frame handles for transportability and ease of carry.
|
|
|
|
|
|
|
|
|
|
27025 Omega 2-1/2 Ton Magic Lift Service Jack
|
|
|
27025 Omega 2-1/2 Ton Magic Lift Service Jack: Magic Lift offers a quicker lift and professional performance through its innovative design and heavy gauge construction with a rugged universal joint release valve. Metered release system allows for precision control of the lift load and the internals are protected with an built in by-pass device from over pumping damage.
|
|
|
|
|
|
|
|
|
|
27026 Omega 2-1/2 Ton Hydraulic Magic Lift Service Jack
|
|
|
27026 Omega 2-1/2 Ton Hydraulic Magic Lift Service Jack: Magic Lift offers a quicker lift and professional performance through its innovative design and heavy gauge construction with a rugged universal joint release valve. Metered release system allows for precision control of the lift load and the internals are protected with an built in by-pass device from over pumping damage.
|
|
|
|
|
|
|
|
|
|
27035 Omega 3-1/2 Ton Hydraulic Magic Lift Service Jack
|
|
|
27035 Omega 3-1/2 Ton Hydraulic Magic Lift Service Jack: Magic Lift offers a quicker lift and professional performance through its innovative design and heavy gauge construction with a rugged universal joint release valve. Metered release system allows for precision control of the lift load and the internals are protected with an built in by-pass device from over pumping damage.
|
|
|
|
|
|
|
|
|
|
27036 Omega 3-1/2 Ton Service Jack With One Piece Handle w/ Foam
|
|
|
27036 Omega 3-1/2 Ton Service Jack With One Piece Foam Handle: Magic Lift offers a quicker lift and professional performance through its innovative design and heavy gauge construction with a rugged universal joint release valve. Metered release system allows for precision control of the lift load and the internals are protected with an built in by-pass device from over pumping damage.
|
|
|
|
|
|
|
|
|
|
27198 OTC Adjusting Crank
|
|
|
OTC 27198 Speed Crank - Compatible with the OTC 30-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
27795 OTC 3 1/16" - 4 1/2" Bushing
|
|
|
3 1/16" - 4 1/2" Bushing
|
|
|
|
|
|
|
|
|
|
27796 OTC 2" - 3 1/2" Bushing
|
|
|
2" - 3 1/2" Bushing
|
|
|
|
|
|
|
|
|
|
|
27797 OTC 1/2" 4-1/2" Dia. Master Set
|
|
|
1/2" 4-1/2" Dia. Master Set
|
|
|
|
|
|
|
|
|
|
27810 OTC Tool Organizer Board
|
|
|
Tool Organizer Board
|
|
|
|
|
|
|
|
|
|
28045 Omega 4 Ton Hydraulic Forklift Jack
|
|
|
28045 Omega 4 Ton Hydraulic Forklift Jack: With dual lifting points, this unit is ready to help lift forklifts and most farm equipment. Precision control of all lift and lower functions.
|
|
|
|
|
|
|
|
|
|
28228 OTC Ram Forcing Screw Cap
|
|
|
OTC 28228 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-1/4"-7 and a diameter of 1-1/2". Intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
28229 OTC Pushing Adapter
|
|
|
OTC 28229 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-1/4"-7 and a diameter of 1-3/4". Intended for use with OTC 25 and 30-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
28230 OTC Pushing Adapter
|
|
|
OTC 28230 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-5/8"-5-1/2 and a diameter of 2-1/4". Intended for use with OTC 50 and 55-Ton Hydraulic Presses, Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
|
28536 OTC Installing Adapter
|
|
|
Installing Adapter
|
|
|
|
|
|
|
|
|
|
|
28538 OTC Adapter Installing
|
|
|
Adapter Installing
|
|
|
|
|
|
|
|
|
|
|
28541 OTC Adapter Removing & Installing
|
|
|
Adapter Removing & Installing
|
|
|
|
|
|
|
|
|
|
|
2860PB OTC Protective Puller Blanket
|
|
|
Protective Puller Blanket
|
|
|
|
|
|
|
|
|
|
|
28612 OTC Tapped Insert
|
|
|
Tapped Insert
|
|
|
|
|
|
|
|
|
|
|
28632 OTC Tapped Insert
|
|
|
Tapped Insert
|
|
|
|
|
|
|
|
|
|
29023B Omega 2 Ton Hydraulic Low Profile Magic Lift Service Jack
|
|
|
29023 Omega 2 Ton Hydraulic Low Profile Magic Lift Service Jack: Extra long low side frames for long reach under vehicle chassis, with the Magic Lift for quick professional performance. Universal joint release provides precision control in any handle position, exclusive breather plug eliminates air in the hydraulic system, and the wide stance and low center of gravity all provide optimum jack performance.
|
|
|
|
|
|
|
|
|
|
29595 OTC Adjusting Crank
|
|
|
OTC 29595 Speed Crank - Compatible with the OTC 50-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
|
302018 OTC Spacer Ring
|
|
|
Spacer Ring
|
|
|
|
|
|
|
|
|
|
|
302019 OTC Receiving Adapter
|
|
|
Receiving Adapter
|
|
|
|
|
|
|
|
|
|
|
302021 OTC Receiving Adapter
|
|
|
Receiving Adapter
|
|
|
|
|
|
|
|
|
|
|
302023 OTC Pulling Screw
|
|
|
Pulling Screw
|
|
|
|
|
|
|
|
|
|
|
302024 OTC Removing/Inst. Adapter
|
|
|
Removing/Inst. Adapter
|
|
|
|
|
|
|
|
|
|
|
302025 OTC Removing/Inst. Adapter
|
|
|
Removing/Inst. Adapter
|
|
|
|
|
|
|
|
|
|
|
302026 OTC Installing Adapter
|
|
|
Installing Adapter
|
|
|
|
|
|
|
|
|
|
|
302027 OTC Removing Adapter
|
|
|
Removing Adapter
|
|
|
|
|
|
|
|
|
|
|
302029 OTC Speed Nut
|
|
|
Speed Nut
|
|
|
|
|
|
|
|
|
|
|
302030 OTC Adapter Removing
|
|
|
Adapter Removing
|
|
|
|
|
|
|
|
|
|
|
302031 OTC Installing Adapter
|
|
|
Installing Adapter
|
|
|
|
|
|
|
|
|
|
|
302032 OTC Removing Adapter
|
|
|
Removing Adapter
|
|
|
|
|
|
|
|
|
|
302249 OTC Chain For 1812 (6000 Lb)
|
|
|
Chain For 1812 (6000 Lb)
|
|
|
|
|
|
|
|
|
|
|
302340 OTC Yoke Assembly
|
|
|
OTC 302340 Yoke Assembly
|
|
|
|
|
|
|
|
|
|
|
302401 OTC Spacer Ring
|
|
|
Spacer Ring
|
|
|
|
|
|
|
|
|
|
|
302482 OTC Speed Nut
|
|
|
OTC 302482 Speed Nut - This speed nut has a thread pitch of 1"-8 and is intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
302483 OTC Speed Nut
|
|
|
OTC 302483 Speed Nut - This speed nut has a thread pitch of 1-1/4"-7 and is intended for use with OTC 30-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
|
302592 OTC Forcing Screw 7/8" - 14
|
|
|
Forcing Screw 7/8" - 14
|
|
|
|
|
|
|
|
|
|
|
302593 OTC Forcing Screw 15/16-12
|
|
|
Forcing Screw 15/16-12
|
|
|
|
|
|
|
|
|
|
|
302595 OTC Receiving Cup
|
|
|
Receiving Cup
|
|
|
|
|
|
|
|
|
|
|
302941 OTC Chain For 1812 (4000 Lb)
|
|
|
Chain For 1812 (4000 Lb)
|
|
|
|
|
|
|
|
|
|
|
303785 OTC Speed Crank
|
|
|
OTC 303785 Speed Crank - For use with OTC 100 Ton Presses, Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
30750 Omega 750 Lbs Engine Stand - H Type
|
|
|
30750 Omega 750 Lbs Engine Stand - H Type: Constructed from heavy-gauge welded square tubular steel with an extra long handle and a rubber grip for ease in rotation and manipulation. Head plate has a full 360 degree rotation with eight locking positions.
|
|
|
|
|
|
|
|
|
|
310999 OTC 4" Extension
|
|
|
OTC 310999 4" Extension Adapter - For use with 22-ton capacity under axle jacks.
|
|
|
|
|
|
|
|
|
|
31250 Omega 1250 Lbs Engine Stand - U Type
|
|
|
31250 Omega 1250 Lbs Engine Stand - U Type: Constructed from heavy-gauge welded square tubular steel with an extra long handle and a rubber grip for ease in rotation and manipulation.
|
|
|
|
|
|
|
|
|
|
31256 Omega 1250 Lbs Rotating Head And Folding Engine Stand
|
|
|
31256 Omega 1250 Lbs Rotating Head And Folding Engine Stand: Constructed from heavy-gauge welded square tubular steel with an extra long handle and a rubber grip for ease in rotation and manipulation. With the added convenience of adjustable legs.
|
|
|
|
|
|
|
|
|
|
314386 OTC Shaft Extension
|
|
|
Shaft Extension
|
|
|
|
|
|
|
|
|
|
314729 OTC Front Support Bracket
|
|
|
Front Support Bracket
|
|
|
|
|
|
|
|
|
|
31500 Omega 3/4 Ton Under Hoist Stand
|
|
|
31500 Omega 3/4 Ton Under Hoist Stand: Safe and fast technology, heavy gauge steel frame to prevent distortion and twisting. Ideal for supporting exhaust systems, shock absorbers and other components during an under vehicle repair.
|
|
|
|
|
|
|
|
|
|
31501 Omega 3/4 Ton Under Hoist Stand With Foot Pedal
|
|
|
31501 Omega 3/4 Ton Under Hoist Stand With Foot Pedal: Safe and fast technology, heavy gauge steel frame to prevent distortion and twisting. Ideal for supporting exhaust systems, shock absorbers and other components during an under vehicle repair.
|
|
|
|
|
|
|
|
|
|
3157 OTC ACC Printer Accuracy Plus
|
|
|
ACC Printer Accuracy Plus
|
|
|
|
|
|
|
|
|
|
|
31609 OTC Chain Assembly
|
|
|
Chain Assembly
|
|
|
|
|
|
|
|
|
|
32035 Omega 3 Ton Jack Stands
|
|
|
32035 Omega 3 Ton Jack Stands: Superior safety and strength, with welded steel construction, one piece multiple locking position ductile ratchet bar, and a quick and secure adjustment mechanism. With counter weighted pawl to help prevent the load from accidentally disengaging.
|
|
|
|
|
|
|
|
|
|
32065 Omega 6 Ton Jack Stands
|
|
|
32065 Omega 6 Ton Jack Stands: Superior safety and strength, with welded steel construction, one piece multiple locking position ductile ratchet bar, and a quick and secure adjustment mechanism. With counter weighted pawl to help prevent the load from accidentally disengaging.
|
|
|
|
|
|
|
|
|
|
32066 Omega 6 Ton Magic Lift Jack Stands
|
|
|
32066 Omega 6 Ton Magic Lift Jack Stands: Superior safety and strength, with welded steel construction, one piece multiple locking position iron ratchet bar, and a patented technology that automatically raises the ratchet arm to the load. With counter weighted pawl to securely lock the ratchet bar in place to help prevent the load from accidentally disengaging.
|
|
|
|
|
|
|
|
|
|
32075 Omega 7 Ton Forklift Jack Stands
|
|
|
32075 Omega 7 Ton Forklift Jack Stands: Superior safety and strength, with welded heavy gauge steel construction to help prevent distortion or twisting.
|
|
|
|
|
|
|
|
|
|
32105 Omega 10 Ton Heavy Duty Jack Stands
|
|
|
32105 Omega 10 Ton Heavy Duty Jack Stands: Superior safety and strength, with welded heavy gauge steel construction to help prevent distortion or twisting.
|
|
|
|
|
|
|
|
|
|
32107 Omega 10 Ton High Lift Jack Stands
|
|
|
32107 Omega 10 Ton High Lift Jack Stands: Superior safety and strength, with welded heavy gauge steel construction to help prevent distortion or twisting.
|
|
|
|
|
|
|
|
|
|
32118 OTC Ram Screw
|
|
|
OTC 32118 Ram Adjusting Screw - 17-1/2 ton, ram adjusting screw with a thread pitch of 1"-8 and is 20" in length. For use with the OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
32125 Omega 12 Ton Jack Stands
|
|
|
32125 Omega 12 Ton Jack Stands: Superior safety and strength, with welded steel construction, one piece multiple locking position ductile ratchet bar, and a quick and secure adjustment mechanism. With counter weighted pawl to help prevent the load from accidentally disengaging.
|
|
|
|
|
|
|
|
|
|
32126 Omega 12 Ton Magic Lift Jack Stands
|
|
|
32126 Omega 12 Ton Magic Lift Jack Stands: Superior safety and strength, with welded steel construction, one piece multiple locking position iron ratchet bar, and a patented technology that automatically raises the ratchet arm to the load. With counter weighted pawl to securely lock the ratchet bar in place to help prevent the load from accidentally disengaging.
|
|
|
|
|
|
|
|
|
|
32225 Omega 22 Ton Heavy Duty Jack Stands
|
|
|
32225 Omega 22 Ton Heavy Duty Jack Stands: Superior safety and strength, with welded heavy gauge steel construction to help prevent distortion or twisting.
|
|
|
|
|
|
|
|
|
|
32325 OTC Ram Flat Base
|
|
|
Ram Flat Base - Ram flat base for use with 10-ton hydraulic rams Nos. 4104 and 4105.
|
|
|
|
|
|
|
|
|
|
32698 OTC Adjusting Screw
|
|
|
OTC 32698 Ram Adjusting Screw - 50 ton, ram adjusting screw with a thread pitch of 1-5/8"-5-1/2 and is 30" in length. For use with the OTC 50-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
|
32699 OTC Adjusting Screw
|
|
|
OTC 32699 Adjusting Screw (2-1/2"-8 threads) - This adjusting screw is 36" long and is intended for use with OTC 100 Ton Presses, Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
33020 Omega 2 Ton Under Hoist Tripod Stand
|
|
|
33020 Omega 2 Ton Under Hoist Tripod Stand: Safe and fast technology, heavy gauge steel frame to prevent distortion and twisting. Ideal for supporting exhaust systems, shock absorbers and other components during an under vehicle repair.
|
|
|
|
|
|
|
|
|
|
|
33856 OTC Collet 5/16
|
|
|
Collet 5/16
|
|
|
|
|
|
|
|
|
|
|
33857 OTC Collet 3/8
|
|
|
Collet 3/8
|
|
|
|
|
|
|
|
|
|
|
33858 OTC Collet 7/16
|
|
|
Collet 7/16
|
|
|
|
|
|
|
|
|
|
|
33859 OTC Collet 1/2
|
|
|
Collet 1/2
|
|
|
|
|
|
|
|
|
|
|
33860 OTC Collet 5/8
|
|
|
Collet 5/8
|
|
|
|
|
|
|
|
|
|
|
33861 OTC Collet 3/4
|
|
|
Collet 3/4
|
|
|
|
|
|
|
|
|
|
|
33862 OTC Collet 7/8
|
|
|
Collet 7/8
|
|
|
|
|
|
|
|
|
|
|
33863 OTC Collet 1-1 1/4
|
|
|
Collet 1-1 1/4
|
|
|
|
|
|
|
|
|
|
|
33864 OTC Collet 1-1/4 1-1/2
|
|
|
Collet 1-1/4 1-1/2
|
|
|
|
|
|
|
|
|
|
|
33865 OTC Collet 1-1/2 1-3/4
|
|
|
Collet 1-1/2 1-3/4
|
|
|
|
|
|
|
|
|
|
34100 Omega 10 Ton Air Jack / Support Stand
|
|
|
34100 Omega 10 Ton Air Jack / Support Stand: With a large operating range (17 1/2" to 51") this versatile piece of equipment operates as both a support stand and an air actuated jack. Completely air operated with a heavy duty pin locking system and a 10 foot air hose and wheeled base for maneuverability and accurate placement.
|
|
|
|
|
|
|
|
|
|
|
34479 OTC 1 5/8" - 5 1/2" Adapter
|
|
|
1 5/8" - 5 1/2" Adapter
|
|
|
|
|
|
|
|
|
|
34510 OTC Pushing Adapter
|
|
|
OTC 34510 Ram Pushing Adapter - With a thread pitch of 1-1/4"-7 and a 3/4" diameter shank, this ram pushing adapter for use with OTC 25 and 30-Ton presses.
|
|
|
|
|
|
|
|
|
|
34511 OTC Pushing Adapter
|
|
|
OTC 34511 Ram Pushing Adapter - With a thread pitch of 1-1/4"-7 and a 1" diameter shank, this ram pushing adapter for use with OTC 25 and 30-Ton presses.
|
|
|
|
|
|
|
|
|
|
34607 OTC Base Assembly For 4020
|
|
|
34607 OTC Base Assembly For 4020 - Base assembly for bench-mounted holding fixture.
|
|
|
|
|
|
|
|
|
|
34755 OTC Pushing Adapter
|
|
|
OTC 34755 Ram Pushing Adapter - This pushing adapter has a 1" diameter shank and a thread pitch of 1-5/8"-5-1/2. Intended for use with 50 and 55-Ton Presses, Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
34756 OTC Pushing Adapter
|
|
|
OTC 34756 Ram Pushing Adapter - This pushing adapter has a 1-1/4" diameter shank and a thread pitch of 1-5/8"-5-1/2. Intended for use with 50 and 55-Ton Presses, Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
34758 OTC Ram Screw
|
|
|
OTC 34758 Ram Adjusting Screw - 30 ton, ram adjusting screw with a thread pitch of 1-1/4"-7 and is 24" in length. For use with the OTC 30-Ton Hydraulic Pullers and Push-Pullers.
|
|
|
|
|
|
|
|
|
|
34807 OTC Pushing Adapter
|
|
|
OTC 34807 V-Pushing Adapter - V-pushing adapter for use with 25-Ton presses.
|
|
|
|
|
|
|
|
|
|
34808 OTC Pushing Adapter
|
|
|
OTC 34808 V-Pushing Adapter - V-pushing adapter for use with 55-Ton presses.
|
|
|
|
|
|
|
|
|
|
37368 OTC Threaded Adapter
|
|
|
OTC 37368 Threaded Adapter - Threaded adapter for OTC 55-Ton (single acting only) presses.
|
|
|
|
|
|
|
|
|
|
|
38840 OTC Chain With Hooks
|
|
|
Chain With Hooks
|
|
|
|
|
|
|
|
|
|
|
38841 OTC Plate
|
|
|
Plate
|
|
|
|
|
|
|
|
|
|
|
38904 OTC Tapped Insert
|
|
|
OTC 38904 Threaded Insert (1-1/4"-7) for OTC 4139 Spring-Return Hollow Center Hydraulic Rams
|
|
|
|
|
|
|
|
|
|
38953 OTC Threaded Adapter
|
|
|
OTC 38953 Threaded Adapter - For use with OTC 25-Ton presses.
|
|
|
|
|
|
|
|
|
|
|
39610 OTC Chain Assembly
|
|
|
Chain Assembly
|
|
|
|
|
|
|
|
|
|
|
39611 OTC Chain Assembly
|
|
|
Chain Assembly
|
|
|
|
|
|
|
|
|
|
4000 OTC Single-Speed Cobra Hydraulic Hand Pump
|
|
|
OTC 4000 Single-Speed Hydraulic Hand Pump - This single-speed pump is ideal for single-acting rams. Developing up to 10,000 psi operating pressure, the pump operates horizontally or vertically in the 'head down" position. Fingertip control provides instant release or pumping action. Has a built-in safety overload valve. Ideal for use with OTC single-acting rams, or similar competitors' rams.
|
|
|
|
|
|
|
|
|
|
|
4000A OTC Hand Pump Two Speed
|
|
|
HAND PUMP TWO SPEED
|
|
|
|
|
|
|
|
|
|
4004 OTC Two-Speed Cobra Hydraulic Hand Pump
|
|
|
OTC 4004 2-speed Hydraulic Hand Pump - Use with single-acting hydraulic rams. Rugged all-metal construction. Maximum handle effort is 90 lbs. Two-speed action provides rapid approach of ram piston to the work. An appropriate and economical power source for applications in which 20 cu. in. of usable oil is adequate.
|
|
|
|
|
|
|
|
|
|
|
40063BL2 OTC Reservoir 2 Gal.
|
|
|
Reservoir 2 Gal.
|
|
|
|
|
|
|
|
|
|
4008 OTC Dualmaster 2 Speed Hand Pump
|
|
|
OTC 4008 Dualmaster® Two-Stage Hand Pump - OTC's finest hand-operated power units. These fast acting, two-stage pumps not only handle high force, high pressure requirements up to 10,000 PSI, but deliver extremely high volume at low pressure (7.35 cu. in. per stroke from 0 to 200 PSI) to quickly move the ram piston to and from the work.
|
|
|
|
|
|
|
|
|
|
40080 Omega Fuel Tank Adapter
|
|
|
For use with Omega model 41000 and 41001 Telescopic Transmission Jacks. Designed specifically to remove fuel tanks safely and securely.
|
|
|
|
|
|
|
|
|
|
4009 OTC Pump W/4 Way Valve
|
|
|
Pump W/4 Way Valve
|
|
|
|
|
|
|
|
|
|
|
4012A OTC Hand Pump Two Speed Lg. Capacity
|
|
|
HAND PUMP TWO SPEED LG. CAPACITY
|
|
|
|
|
|
|
|
|
|
4016 OTC 2 Speed Hand Pump W/2 Way Valve
|
|
|
OTC 4016 Dualmaster Jr.® Two-Stage Hand Pump - Here’s two-stage flexibility at a popular price! These pumps have extra-large reservoirs (125 cu. in. usable oil) and permit use with large hydraulic rams or in multiple small ram applications. Compact and lightweight, Dualmaster Jr. provides maximum flexibility with minimum effort in a portable pump.
|
|
|
|
|
|
|
|
|
|
4017 OTC Hand Pump Assembly
|
|
|
OTC 4017 Dualmaster Jr.® Two-Stage Hand Pump - Here’s two-stage flexibility at a popular price! These pumps have extra-large reservoirs (125 cu. in. usable oil) and permit use with large hydraulic rams or in multiple small ram applications. Compact and lightweight, Dualmaster Jr. provides maximum flexibility with minimum effort in a portable pump.
|
|
|
|
|
|
|
|
|
|
40500 Omega Clutch Jack - 500 Lbs
|
|
|
40500 Omega Clutch Jack - 500 Lbs: Capable of handling 14" and 15 1/2" clutch assemblies.1 3/4" and 2" splines rotate a full 360 degrees turn side to side and tilt vertically for precise clutch alignment.
|
|
|
|
|
|
|
|
|
|
40501 Omega Flywheel Adapter For Clutch Jack 250-Lb
|
|
|
40501 Omega Flywheel Adapter For Clutch Jack 250-Lb: 250 lb. capacity flywheel adapter for 40500 Clutch Jack
|
|
|
|
|
|
|
|
|
|
40700 Omega 700 Lbs Economy Telescopic Transmission Jack
|
|
|
40700 Omega 700 Lbs Economy Telescopic Transmission Jack
|
|
|
|
|
|
|
|
|
|
4082A OTC 4 Ton Ram W/Half Coupler
|
|
|
OTC 4082A 4 Ton Ram with Half Coupler - 4-ton ram with 5" stroke and special piston rod end designed to fit most collision repair set components. These premium quality rams are designed for long, trouble-free service. Backed by a life-time warranty, they are ideal replacements for worn-out, leaky rams.
|
|
|
|
|
|
|
|
|
|
|
4082B OTC 4 Ton Ram With Half Coupler
|
|
|
4 TON RAM With HALF COUPLER
|
|
|
|
|
|
|
|
|
|
4085 OTC Hydraulic Spreader
|
|
|
OTC 4085 1-Ton Capacity Hydraulic Spreader - This hydraulic spreader is rated at a full 1-ton capacity at 10,000 PSI and that’s enough for a wide variety of jobs. Working in tight spots is no problem—it needs only a 9/16" clearance to engage the jaws. With a big 4" spread, it’s ready for a variety of applications.
|
|
|
|
|
|
|
|
|
|
41000C Omega 1000 Lbs Telescopic Hydraulic Transmission Jack
|
|
|
41000C Omega 1000 Lbs Telescopic Hydraulic Transmission Jack: With two stage chrome-plated rams, extra wide base, rugged steel wheels and unique handle release pedal provides durability, safety and stability.
|
|
|
|
|
|
|
|
|
|
41001C Omega 1000 Lbs Telescopic Hydraulic Transmission Jack With Air
|
|
|
41001C Omega 1000 Lbs Telescopic Hydraulic Transmission Jack With Air: With two stage chrome-plated rams, extra wide base, rugged steel wheels and unique handle release pedal provides durability, safety and stability.
|
|
|
|
|
|
|
|
|
|
41003 Omega 1000 Lbs Telescopic Transmission Jack
|
|
|
41003 Omega 1000 Lbs Telescopic Transmission Jack: With two stage chrome-plated rams, extra wide base, rugged steel wheels and unique handle release pedal provides durability, safety and stability.
|
|
|
|
|
|
|
|
|
|
41100C Omega 1100 Lbs Low Profile Hydraulic Trans Jack
|
|
|
41100C Omega 1100 Lbs Low Profile Hydraulic Trans Jack. Adjustable head can be tilted forward, backward, and side to side for optimum alignment of transmission bolt pattern and pins. Hydraulic system is protected from internal damage by a patented by-pass mechanism. Load-restraining chain is vital for raising of lowering safety. Four wheel caster allow easy movement, positioning of transmission jack. Rugged steel wheels and full swivel ball bearing casters. User friendly 360° rotating pumping socket for the maximum in directional operation.
|
|
|
|
|
|
|
|
|
|
42000C Omega 1 Ton Low Profile Hydraulic Transmission Jack
|
|
|
42000C Omega 1 Ton Low Profile Hydraulic Transmission Jack: Adjustable head can be tilted forward, backward, and side to side for optimum alignment of transmission bolt pattern and pins. Hydraulic system is protected from internal damage by a patented by-pass mechanism. Load-restraining chain is vital for raising of lowering safety. Four wheel caster allow easy movement, positioning of transmission jack. Rugged steel wheels and full swivel ball bearing casters. User friendly 360° rotating pumping socket for the maximum in directional operation.
|
|
|
|
|
|
|
|
|
|
42001 Omega 1 Ton Air / Manual Telescopic Transmission Jack
|
|
|
42001 Omega 1 Ton Air / Manual Telescopic Transmission Jack: Adjustable head can be tilted forward, backward, and side to side for optimum alignment of transmission bolt pattern and pins. Hydraulic system is protected from internal damage by a patented by-pass mechanism. Load-restraining chain is vital for raising of lowering safety. Four wheel caster allow easy movement, positioning of transmission jack. Rugged steel wheels and full swivel ball bearing casters. User friendly 360° rotating pumping socket for the maximum in directional operation.
|
|
|
|
|
|
|
|
|
|
42003 Omega 1 Ton Telescopic Transmission Jack
|
|
|
42003 Omega 1 Ton Telescopic Transmission Jack: Adjustable head can be tilted forward, backward, and side to side for optimum alignment of transmission bolt pattern and pins. Hydraulic system is protected from internal damage by a patented by-pass mechanism. Load-restraining chain is vital for raising of lowering safety. Four wheel caster allow easy movement, positioning of transmission jack. Rugged steel wheels and full swivel ball bearing casters. User friendly 360° rotating pumping socket for the maximum in directional operation.
|
|
|
|
|
|
|
|
|
|
43000 Omega 1-1/2 Ton Low Profile Transmission Jack
|
|
|
43000 Omega 1-1/2 Ton Low Profile Transmission Jack: Adjustable head can be tilted forward, backward, and side to side for optimum alignment of transmission bolt pattern and pins. Hydraulic system is protected from internal damage by a patented by-pass mechanism. Load-restraining chain is vital for raising of lowering safety. Four wheel caster allow easy movement, positioning of transmission jack. Rugged steel wheels and full swivel ball bearing casters. User friendly 360° rotating pumping socket for the maximum in directional operation.
|
|
|
|
|
|
|
|
|
|
4313C OTC 12-Ton Air-Assist Bottle Jack
|
|
|
OTC 4313C 12-Ton Air-Assist Hydraulic Bottle Jack - Compact, yet heavy-duty units designed for the truck and construction industries; in the shop, roadside, or at the job site. Can be operated either manually or pneumatically. Air hose can swivel in any direction of connection from air source. Minimum air pressure required is 100 psi. Safety valve prevents overloading. Extension screw gives added height when needed.
|
|
|
|
|
|
|
|
|
|
4321C OTC Tools 20-Ton Air-Assist Hydraulic Bottle Jack
|
|
|
OTC 4321C 20-Ton Air-Assist Hydraulic Bottle Jack - Compact, yet heavy-duty units designed for the truck and construction industries; in the shop, roadside, or at the job site. Can be operated either manually or pneumatically. Air hose can swivel in any direction of connection from air source. Minimum air pressure required is 100 psi. Safety valve prevents overloading. Extension screw gives added height when needed.
|
|
|
|
|
|
|
|
|
|
4324 OTC Tools Stinger Engine Support Bar
|
|
|
OTC 4324 Engine Support Bar - This engine support bar has features like; rubber padded support legs ensure stability during use, 1,100 pound capacity, tubular steel construction for long life, adjustable width and two hook assemblies. Includes two 36" chain assemblies.
|
|
|
|
|
|
|
|
|
|
|
43562 OTC Threaded Adapter
|
|
|
OTC 43562 Reducing Adapter for Single-Acting Ram
|
|
|
|
|
|
|
|
|
|
43563 OTC Adapter
|
|
|
OTC 43563 Reducing Adapter for Double-Acting Ram
|
|
|
|
|
|
|
|
|
|
44020 Omega 2 Ton Engine Crane
|
|
|
44020 Omega 2 Ton Engine Crane: Metered control release valve for lowering boom at a precisely controlled rate, special 8 Ton hydraulic long ram is equipped with a patented built in by-pass mechanism to prevent over pumping damage. Heavy duty welded construction with reinforced tube steel.
|
|
|
|
|
|
|
|
|
|
44700 Omega 700Lbs Engine Transverse Bar With Arm
|
|
|
44700 Omega 700Lbs Engine Transverse Bar With Arm: Adjustable from 38" to 61" width, two 14" adjustable hook screws, two 38" braided steel cables 1/8" in diameter.
|
|
|
|
|
|
|
|
|
|
44915 Omega 1-1/2 Ton Hydraulic Long Jack
|
|
|
44915 Omega 1-1/2 Ton Hydraulic Long Jack: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.
|
|
|
|
|
|
|
|
|
|
44930 Omega 3 Ton Hydraulic Unit
|
|
|
44930 Omega 3 Ton Hydraulic Unit: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.
|
|
|
|
|
|
|
|
|
|
44940 Omega 4 Ton Hydraulic Unit
|
|
|
44940 Omega 4 Ton Hydraulic Unit: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.
|
|
|
|
|
|
|
|
|
|
44980 Omega 8 Ton Long Jack
|
|
|
44980 Omega 8 Ton Long Jack: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.
|
|
|
|
|
|
|
|
|
|
44981C Omega 8 Ton Air/ Manual Long Jack
|
|
|
44981 Omega 8 Ton Air/ Manual Long Jack: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.
|
|
|
|
|
|
|
|
|
|
46000 Omega Brake Drum Handler
|
|
|
46000 Omega Brake Drum Handler: Great for removing and installing 15" and 16 1/2" break drums, with a detachable handle storage or transportation.
|
|
|
|
|
|
|
|
|
|
47050C Omega 3/4 Ton Wheel Dolly
|
|
|
47050C Omega 3/4 Ton Wheel Dolly. Hydraulic system actuated to provide smooth, positive power for the removal and installation of single, tandem and duplex tires and wheels. Heavy duty tubular construction with precision crafted cradle rollers.
|
|
|
|
|
|
|
|
|
|
47053 Omega 3/4 Ton Wheel Dolly 1500 lbs. Capacity
|
|
|
47053 Omega 3/4 Ton Wheel Dolly is designed to facilitate the removal and installation of pneumatic tires and wheel assemblies found on many trucks, buses and trailers. This is NOT suitable for use as a wheel and tire puller. It is designed ONLY for use in removing up to rated capacity tire and wheel assemblies which are not bound and/or seized up at the brake drum or hub assemblies. This device is designed to be used in conjunction with jacks and jack stands.
|
|
|
|
|
|
|
|
|
|
50040 Omega 4 Ton Hydraulic Body Repair Kit
|
|
|
50040 Omega 4 Ton Hydraulic Body Repair Kit: This kit is a must for body collision damage repair. Specifically designed for pushing, spreading, and pressing of vehicle body panels as well as various other tasks.
|
|
|
|
|
|
|
|
|
|
50100 Omega 10 Ton Body Repair Kit
|
|
|
50100 Omega 10 Ton Body Repair Kit: This kit is a must for body collision damage repair. Specifically designed for pushing, spreading, and pressing of vehicle body panels as well as various other tasks.
|
|
|
|
|
|
|
|
|
|
5018A OTC Clutch Handler
|
|
|
OTC 5018A Truck Clutch & Flywheel Handler - This unit is capable of handling 14" and 15-1/2" clutch assemblies weighing up to 250 lbs. With features like swivel casters, a 360º swivel head and splined shaft with a pilot to aid alignment.
|
|
|
|
|
|
|
|
|
|
5078 OTC 2000 Lbs. Heavy-Duty Transmission Jack For Trucks And Buses (Air)
|
|
|
OTC 5078 Air-Assisted 2,000 lb Capacity High-Lift Transmission Jack for Trucks & Buses - Low height of 41-1/2" allows transmission to be rolled out from under vehicle's frame. Foot-operated air pump enables the operator to effortlessly raise the transmission into place. Rugged heavy wall tubing and oversized base for stability. A dedicated adapter for Allison 500 and 600 series automatic transmission is included.
|
|
|
|
|
|
|
|
|
|
|
50931 OTC Pump Mounting Bracket
|
|
|
Pump Mounting Bracket
|
|
|
|
|
|
|
|
|
|
5093B OTC Long Reach Under Axle Jack (20/35/65 Ton)
|
|
|
OTC 5093B Under Axle Jack - for lifting loaded trailers, buses, and other Class 7 and 8 vehicles. Three-stage lift capacity – 22, 38.5 and 71.5 ton.
|
|
|
|
|
|
|
|
|
|
5106 OTC 6 Ton Air Hydraulic Floor Service Jack
|
|
|
OTC 5106 6-ton Capacity Air / Hydraulic Service Jack
|
|
|
|
|
|
|
|
|
|
5110 OTC 10 Ton Air Hydraulic Floor Service Jack
|
|
|
OTC 5110 10-ton Capacity Air / Hydraulic Service Jack
|
|
|
|
|
|
|
|
|
|
5130 OTC Drivemaster Differential Handler & Driveline Lift
|
|
|
OTC 5130 1,000 lb. Capacity DriveMaster™ Driveline Lift - Fits most common differentials currently in use on category 7 and 8 heavy duty trucks (Eaton, Fuller, Rockwell, Meritor, Spicer, International and Mack).
|
|
|
|
|
|
|
|
|
|
|
51695 OTC Jack Cart
|
|
|
OTC 51695 Jack Cart - Part of basic tooling for working on the Hendirckson 340 thru 450 suspensions. (Available in the OTC 1740 Basic Tooling Set)
|
|
|
|
|
|
|
|
|
|
5200 OTC Ultra-Low Profile 2-Ton Service Jack
|
|
|
OTC 5200 2-Ton Service Jack Ultra-Low Profile - Introducing the OTC 5200 Ultra-Low Profile 2-Ton Service Jack – the perfect jack for high performance shops.
|
|
|
|
|
|
|
|
|
|
5206 OTC 6 Ton Heavy Duty Service Jack
|
|
|
OTC 5206 6-Ton Heavy-Duty Service Jack - New “OTC Family” look. Ergonomic handle for user comfort and easy mobility. CE marked – ASME/PALD tested. • Minimum clearance of 6-11/16" (6-Ton).
|
|
|
|
|
|
|
|
|
|
5210 OTC 10 Ton Heavy Duty Service Jack
|
|
|
OTC 5210 10-Ton Heavy-Duty Service Jack - New “OTC Family” look. Ergonomic handle for user comfort and easy mobility. CE marked – ASME/PALD tested.
|
|
|
|
|
|
|
|
|
|
5213 OTC Tools High Performance 12-Ton Bottle Jack
|
|
|
OTC 5213 High Performance 12-Ton Bottle Jack - These OTC bottle jacks deliver high performance and long working life. With innovative design and features like the base, pressure cylinder and oil reservoir being constructed from a single internal part, making for a stronger than average jack and a piston that never contacts the cylinder to prevent damage from being over pressured.
|
|
|
|
|
|
|
|
|
|
5214 OTC Forklift Jack
|
|
|
OTC 5214 4-Ton Capacity Fork Lift Jack - With two lifting points (scissors or cylinder) this forklift jack provides you with options to be able to lift up to 5 tons (on the cylinder) while the scissors are rated to 4 tons.
|
|
|
|
|
|
|
|
|
|
5221 OTC Tools High Performance 20-Ton Bottle Jack
|
|
|
High Performance 20-Ton Bottle Jack - These OTC bottle jacks deliver high performance and long working life. With innovative design and features like the base, pressure cylinder and oil reservoir being constructed from a single internal part, making for a stronger than average jack and a piston that never contacts the cylinder to prevent damage from being over pressured.
|
|
|
|
|
|
|
|
|
|
5268 OTC 20-Ton Truck Ramps - Pair
|
|
|
OTC 5268 20-ton Truck Ramps (Pair) - Designed to be used on tractor trucks (semis) these ramps feature 10" wide treads, 33" long retractable handles, overall length of 51", non skid rubber matting, heavy-duty rubber wheels and they are covered by the OTC Lifetime Marathon Warranty®.
|
|
|
|
|
|
|
|
|
|
5269 OTC 20-Ton Wide Truck Ramps
|
|
|
OTC 5269 20-ton Wide Truck Ramps - Designed to be used on trucks with wider front wheels / tires (cement, garbage and dump trucks) these ramps feature 16" wide treads, 33" long retractable handles, overall length of 51", non skid rubber matting, heavy-duty rubber wheels and they are covered by the OTC Lifetime Marathon Warranty®.
|
|
|
|
|
|
|
|
|
|
5285 OTC Power Train Lift 1,650 Lb Capacity
|
|
|
OTC 5285 Power Train Lift (1,650 Lb Capacity) - Need a lift? Get set up with OTC shop equipment. These lifts will handle engine and transmission assemblies, gas tanks, drive axle assemblies, engine/transaxle assemblies, electric vehicle batteries, and more.
|
|
|
|
|
|
|
|
|
|
5292 OTC 27.5-Ton Capacity Under-Axle Jack
|
|
|
5292 OTC 27.5-Ton Capacity Under-Axle Jack - Versatile, easy-to-use heavy duty under-axle hydraulic jack that is compact, can fit under many types of vehicles, and handle a wide assortment of vehicles. With a robust design having a completely sealed piston, new lever design and pneumatic release valve that allows for more precise release control, does not require separate valve operation step. It also has four position handle includes 'stow away' position, a venturi vacuum power return system, it includes two height adapters and the jack is ANSI / PALD certified.
|
|
|
|
|
|
|
|
|
|
540232 OTC Tools Mack Transmission Mounting Brackets
|
|
|
OTC 540232 Mack Transmission Mounting Brackets - Accessory for the OTC 5019A Low-Lift Transmission Jack.
|
|
|
|
|
|
|
|
|
|
552650 OTC Tools Aluminum Racing Jack Wall Mount
|
|
|
OTC 552650 Aluminum Racing Jack wall Mount - Ideal for storing or displaying the 1532 OTC Aluminum Racing Jack , Easily mounts to shop wall or side of truck. Includes convenient snap-in handle clasps. Velcro strap for additional security. A Must Have!
|
|
|
|
|
|
|
|
|
|
5812 ATD Tools Hydraulic Foot Pump
|
|
|
Operates any single-acting ram up to 55 ton capacity in many industrial and construction applications. Made of lightweight, durable corrosion free aluminum with a built in pressure by-pass system to prevent overload operation, provides up to 10,000 psi with standard shop air supply pressure of 90-175 psi.
|
|
|
|
|
|
|
|
|
|
60120 Omega 12 Ton Shop Press With Hydraulic Bottle Jack
|
|
|
60120 Omega 12 Ton Shop Press With Hydraulic Bottle Jack: This press is ideal for the installation or removal of gears, u-joints, pulleys, wrist pins, bending, bonding, straightening and any other press type applications.
|
|
|
|
|
|
|
|
|
|
60123 Omega 12 Ton Shop Press
|
|
|
60123 Omega 12 Ton Shop Press: This press is ideal for the installation or removal of gears, u-joints, pulleys, wrist pins, bending, bonding, straightening and any other press type applications.
|
|
|
|
|
|
|
|
|
|
60200 Omega 20 Ton Shop Press
|
|
|
60200 Omega 20 Ton Shop Press: This press is ideal for the installation or removal of gears, u-joints, pulleys, wrist pins, bending, bonding, straightening and any other press type applications.
|
|
|
|
|
|
|
|
|
|
60253 Omega 25 Ton Shop Press With Hand Pump
|
|
|
60253 Omega 25 Ton Shop Press With Hand Pump: This press is ideal for the installation or removal of gears, u-joints, pulleys, wrist pins, bending, bonding, straightening and any other press type applications.
|
|
|
|
|
|
|
|
|
|
|
61217 OTC Electric Pump
|
|
|
OTC 61217 Electric Pump - This is a 3-phase, 220 volt, 3,450 rpm electric / hydraulic pump typically used on 100 and 150 ton heavy-duty shop presses (OTC 1858 and 1868).
|
|
|
|
|
|
|
|
|
|
61373 OTC Mounting Plate Adapter.
|
|
|
OTC 61373 Detroit Allison Transmission Mounting Plate - Detroit Allison Transmission Mounting Plates for 1750A and 1750 diesel engine stands.
|
