OTC 1723 Engine Support Bar (2-Point) - Cutting edge, design self-centers load to prevent tipping on inclined surfaces. Smooth sliding legs adjust easily to different vehicle widths. PVC-coated support legs don't scratch vehicle surfaces. Spinner handle enables lightning fast adjustment.

OTC 1725 Engine Support Bar (3-Point) features cutting edge, patent pending design self-centers load to prevent tipping on inclined surfaces. The smooth sliding legs adjust easily to different vehicle widths. PVC-coated support legs don't scratch vehicle surfaces and the “Quick Connect” third-point bar makes setup a snap. A spinner handle enables lightning fast adjustment.

OTC 1813 6,000 lb Capacity Heavy-Duty Crane - Telescoping boom adjusts to three different lengths for three different weight capacities. Boom swivels for vertical and lateral positioning. Equipped with two speed hydraulic pump for rapid, easy lifting. Legs extend to straddle the biggest tires. Usable reach is almost 92". Steering dolly for easy maneuverability also serves as floor lock.

The OTC 1814 6,000 Ib. capacity retractable leg mobile floor crane equipped with No. 61399* electric / hydraulic (115V) pump with remote motor control. Three boom positions give you capacities of 4,000, 5,000, and 6,000 Ibs. - enough to lift the biggest engines and, in many cases, the transmission right along with the engine. A unique and useful feature is the boom swivel. Fully extended (4,000 Ib. cap.), you can swing the boom a full 3 ft. In the 6,000 Ib. cap. position you can achieve a swing of 26".

OTC 1819 2,200 lb Capacity Heavy-Duty Crane - Space-saving fold-away feature for storage. Adjustable leg spread for "close-in" work. Telescoping boom extension for added reach. Equipped with 2-speed hydraulic hand pump. 16-7/8" lifting chain.

OTC 1820 4,400 lb Capacity Heavy-Duty Crane - Space-saving fold-away feature for storage. Adjustable leg spread for "close-in" work. Telescoping boom extension for added reach. Equipped with 2-speed hydraulic hand pump. 18-3/8" lifting chain.

OTC 1821 10-Ton Air Operated Oil Filter Crusher - Crushes up to four automotive filters at one time, in just 20 seconds. 100% air operation eliminates electrical connections. The generous size crushing chamber (9" high) easily accommodates the largest automotive spin-on filters on the market.

OTC 2002 2,000 lb Capacity Folding Floor Crane - This 2,000 lb floor crane folds for compact storage, has a reach of 24" to 36" with 3-1/2" front wheels and 5-7/8" rear casters.

OTC 2004 4,000 lb Capacity Folding Floor Crane - This 4,000 lb floor crane folds for compact storage, has a reach of 25" to 46" with 3-1/2" front wheels and 5-7/8" rear casters.

Accessory Kit For 5079

Tee Connection

Remote Control Hand Switch

OTC 28228 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-1/4"-7 and a diameter of 1-1/2". Intended for use with OTC 17-1/2-Ton Hydraulic Pullers and Push-Pullers.

OTC 28229 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-1/4"-7 and a diameter of 1-3/4". Intended for use with OTC 25 and 30-Ton Hydraulic Pullers and Push-Pullers.

OTC 28230 Ram Forcing Screw Cap - This ram cap has a thread pitch of 1-5/8"-5-1/2 and a diameter of 2-1/4". Intended for use with OTC 50 and 55-Ton Hydraulic Presses, Pullers and Push-Pullers.

OTC 4324 Engine Support Bar - This engine support bar has features like; rubber padded support legs ensure stability during use, 1,100 pound capacity, tubular steel construction for long life, adjustable width and two hook assemblies. Includes two 36" chain assemblies.

44020 Omega 2 Ton Engine Crane: Metered control release valve for lowering boom at a precisely controlled rate, special 8 Ton hydraulic long ram is equipped with a patented built in by-pass mechanism to prevent over pumping damage. Heavy duty welded construction with reinforced tube steel.

44700 Omega 700Lbs Engine Transverse Bar With Arm: Adjustable from 38" to 61" width, two 14" adjustable hook screws, two 38" braided steel cables 1/8" in diameter.

44915 Omega 1-1/2 Ton Hydraulic Long Jack: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.

44930 Omega 3 Ton Hydraulic Unit: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.

44940 Omega 4 Ton Hydraulic Unit: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.

44980 Omega 8 Ton Long Jack: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.

44981 Omega 8 Ton Air/ Manual Long Jack: Fabricated from hard-cast steel with heat-treated critical stress areas and a wide stable base.

Premium Jack Oil (Quart)

HW93294 Hein-Werner Automotive Premium Jack Oil (Gallon)

HW93806 Hein-Werner 3 Ton Engine Crane. Roller bearings in wheels for ease of movement. Swivel hook for full rotation of load. Side swivel of boom for ease of positioning load. Pry bar to remove weight from leg to ease movement of leg extension. 3 Boom and leg extension positions. Air operated ram for easy load lifting and control. Equipped air pump operates on standard shop air and has smooth rise, hold, and lowering control.