|
|
|
|
|
|
15067 Titan Replacement Blade for 15063
|
|
|
Replacement Blade for 15063
|
|
|
|
|
|
|
|
|
|
51950 Titan Exo Burr Deburring Tool and External Chamfer Tool
|
|
|
51950 Titan 51950 Exo Burr Deburring Tool and External Chamfer Tool. Titan Tools 51950 EXO burr external deburrer and chamfering tool is indispensable in repairing damaged threads. With this deburring tool, you can quickly repair damaged threads from 5/16-inch to 7/8-inch (8-22mm). Hardened HRC 60 steel blades remove burrs and uneven ridges from threaded rods, pipes, and more. Works on hardened and mild steels, grade 8 fasteners, stainless steel, brass, Copper, aluminum, plastics, wood, etc. 1/4-inch hex shank attaches to your drill quickly. Low speeds make this tool most effective – Recommended Speed is 500 RPM in a clockwise direction only.
|
|
|
|
|
|
|
|
|
|
2002-2120 HT212 Bacharach PVC Pipe Cutter 1-5/8" Capacity
|
|
|
HT212 Bacharach PVC Pipe Cutter 1-5/8" Capacity
|
|
|
|
|
|
|
|
|
|
FT500 CPS Pro-Set 45º Flaring and Burnishing Tool 3/16" To 5/8" O.D.
|
|
|
Faceted, hardened steel, chrome-finished cone rolls out perfect 45° flares above die block, and automatically burnishes flare face reducing the need for deburring. Original wall thickness is maintained at base of flare. New slip-on yoke permits use in tight quarters, where there is little space between nut and tube end.
|
|
|
|
|
|
|
|
|
|
FS275 CPS 45° Flare And Swaging Tool Kit 1/8" To 3/4"
|
|
|
Designed for single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45 degrees). Includes five swage adapters 1/8" through 3/4". Chrome swivel, made of alloy steel reduces friction. Forged yoke made of heat-treated steel. Housed in a blow-molded storage case.
|
|
|
|
|
|
|
|
|
|
TB04 CPS 1/4" Tube Bender
|
|
|
The CPS TB04 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight 9/16" radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely.
|
|
|
|
|
|
|
|
|
|
TB05 CPS 5/16" Tube Bender
|
|
|
The CPS TB05 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless steel.
|
|
|
|
|
|
|
|
|
|
TB06 CPS 3/8" Tube Bender
|
|
|
The CPS TB06 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless steel.
|
|
|
|
|
|
|
|
|
|
TB08 CPS 1/2" Tube Bender
|
|
|
The CPS TB08 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless steel.
|
|
|
|
|
|
|
|
|
|
TB10 CPS 5/8" Tube Bender
|
|
|
The CPS TB10 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless steel.
|
|
|
|
|
|
|
|
|
|
TB12 CPS 3/4" Tube Bender
|
|
|
The CPS TB12 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless steel.
|
|
|
|
|
|
|
|
|
|
TB368 CPS Universal Tube Bender 1/4" 5/16" 3/8"
|
|
|
Compact and durable tool with multiple bending capabilities. Grooves for 1/4", 5/16", and 3/8".
|
|
|
|
|
|
|
|
|
|
TC127 CPS Mini Tube Cutter 1/8" To 5/8" With Large Turning Wheel
|
|
|
PRO-SET Premium Mini Tube Cutter. Over-sized turning wheel designed and approved by service technicians for a sure comfortable grip. Can cut tubes as small as 1/8'' (4mm) to as large as 5/8'' (15mm). Small clearance lets this tool work in the smallest spaces - only requires 1-1/4'' for clearance.
|
|
|
|
|
|
|
|
|
|
TC206 CPS Premium Ratchet Feedtube Tube Cutter 3/8" To 2-5/8" O.D.
|
|
|
PRO-SET premium ratchet feed tube cutter provides consistent clean cuts. Ratchet feed mechanism adjusts fast giving you more cuts in less time. The cutting wheel is forged from top grade steel for easy cutting and longer life. Replacement cutting wheel included in handle. Can cut tubes as small as 3/8'' and as large as 2-5/8''.
|
|
|
|
|
|
|
|
|
|
TC274 CPS Premium Tube Cutter 1/8" To 1-1/8" With Reamer
|
|
|
PRO-SET premium tube cutter. Top-grade steel cutting wheel provides smooth operation and consistent clean cuts. Fold away steel reamer with turned cutting edge to remove inside burrs; filing surface to remove outside burrs. Can cut tubes as small as 1/8" (4mm) to as large as 1-1/8" (28mm).
|
|
|
|
|
|
|
|
|
|
TC312 CPS Heavy Duty Tube Cutter 1/4" To 1 5/8" With Reamer Tool
|
|
|
PRO-SET Heavy-Duty Tube Cutter. Top-grade steel cutting wheel provides smooth operation and consistent clean cuts. Fold away, steel reamer tool with turned cutting edge removes inside burrs. Filing surface removes outside burrs. Spare Cutting Wheel Located under retractable locking reamer. Use on hard or soft copper, aluminum & brass tubing. Can cut tubes as small as 1/4'' to as large as 1-5/8''.
|
|
|
|
|
|
|
|
|
|
TCSET CPS Combo Pack Mini-Tube Cutter TC127 + Premium Tube Cutter TC274
|
|
|
Combo Pack featuring Mini-Tube Cutter (TC127) and Premium Tube Cutter (TC274). The Mini-Tube Cutter features over-sized turning wheel designed and approved by service technicians for a sure comfortable grip. The Premium Tube Cutter features top-grade steel cutting wheel provides smooth operation and consistent clean cuts, Fold away steel reamer with turned cutting edge to remove inside burrs; filing surface to remove outside burrs.
|
|
|
|
|
|
|
|
|
|
TCX4C CPS Cutting Wheel for TC274, TC312 10Pk
|
|
|
Ten pack of cutting wheels for CPS TC274 and CPS TC312.
|
|
|
|
|
|
|
|
|
|
|
TCX4CS CPS Cutting Wheel and Screw for TC274 and TC312
|
|
|
Cutting Wheel and Screw for CPS TC274 and CPS TC312.
|
|
|
|
|
|
|
|
|
|
|
TCX4CTS CPS Titanium Cutting Wheel and Screw for TC174, TC274 and TC312
|
|
|
Titanium Cutting Wheel and Screw for CPS TC164, CPS TC274 and CPS TC312.
|
|
|
|
|
|
|
|
|
|
|
TCX4R CPS Reamer Blade for TC274 and TC312
|
|
|
Reamer Blade for CPS TC274 and CPS TC312.
|
|
|
|
|
|
|
|
|
|
TCX4S CPS Screws For Cutting Wheel TC274, TC312 10pk
|
|
|
10-Pack of cutting wheel screws for CPS TC274 and CPS TC312.
|
|
|
|
|
|
|
|
|
|
TCX7C CPS TC127 Cutting Wheel (10-Pack)
|
|
|
10-Pack of cutting wheels for TC127.
|
|
|
|
|
|
|
|
|
|
|
TCX7CS CPS Cutting Wheel and Screw for TC127
|
|
|
Cutting Wheel and Screw for CPS TC127.
|
|
|
|
|
|
|
|
|
|
|
TCX7CTS CPS Titanium Cutting Wheel and Screw for TC127
|
|
|
Titanium Cutting Wheel and Screw for CPS TC127.
|
|
|
|
|
|
|
|
|
|
TCX7S CPS TC127 Screw For Cutting Wheel For TC127 10pk
|
|
|
Ten pack of screws for CPS TC127 cutting wheel.
|
|
|
|
|
|
|
|
|
|
TLRM CPS Reamer and Deburring Tool
|
|
|
CPS reamer and burr remover tool. Handles tubes as small as 1/16'' to as large as 1 3/8''. Robust design with steel blades for the removal of both inner and outer burrs.
|
|
|
|
|
|
|
|
|
|
FT800FN CPS R-410A Clutch Type Eccentric Flaring Tool
|
|
|
R-410A Clutch driven flaring tool with ratchet and case for 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4" O.D. tubing. R-410A Eccentrically Type Concentric Flaring Tool engineered specifically to create stronger flare joints for higher pressure R-410A systems. Unique clutch driven feed screw and eccentrically mounted cone produces uniform, clean flare walls without galling. Exclusive 3/8”sq drive incorporated directly in yoke handle for use with ratchet (included). Rugged polyethylene storage case included.
|
|
|
|
|
|
|
|
|
|
FS226 CPS Tube Cutter & Double Flaring Set
|
|
|
Use in automotive air conditioning service to create single or double flares. Rugged forged steel slip-on yoke and hardened flaring bar. Chrome finished flaring cone forms better flares with less effort. Positive grip flaring bar eliminates tube movement. Easy operation with professional results. 1 year warranty.
|
|
|
|
|
|
|
|
|
|
|
FS275M CPS 45° Flaring & Swaging Tool Kit Metric: 4mm to 22mm
|
|
|
Designed for single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45 degrees). Includes swage adapters for 4mm through 22mm". Chrome swivel, made of alloy steel reduces friction. Forged yoke made of heat-treated steel.
|
|
|
|
|
|
|
|
|
|
|
FSX501 CPS Replacement Bar for FS275 (7/16'', 1/4'', 1/8'', 3/16'', 5/16'', 3/8'')
|
|
|
Replacement Bar for FS275 (7/16'', 1/4'', 1/8'', 3/16'', 5/16'', 3/8'').
|
|
|
|
|
|
|
|
|
|
|
FSX502 CPS Replacement Short Bar for FS275 (1/2'', 5/8'', 3/4'')
|
|
|
Replacement Short Bar for FS275 (1/2'', 5/8'', 3/4'').
|
|
|
|
|
|
|
|
|
|
|
FSX503 CPS Replacement 5/16" Swaging Adapter for FS275
|
|
|
Replacement 5/16'' Swaging Adapter for FS275.
|
|
|
|
|
|
|
|
|
|
|
FSX504 CPS Replacement 3/16'' Swaging Adapter for FS275
|
|
|
Replacement 3/16'' Swaging Adapter for FS275.
|
|
|
|
|
|
|
|
|
|
|
FSX505 CPS Replacement 1/2" Swaging Adapter for FS275
|
|
|
Replacement 1/2'' Swaging Adapter for FS275.
|
|
|
|
|
|
|
|
|
|
|
FSX506 CPS Replacement 5/8" Swaging Adapter for FS275
|
|
|
Replacement 5/8'' Swaging Adapter for FS275.
|
|
|
|
|
|
|
|
|
|
|
FSX507 CPS Replace,emt Swaging Metric Adapters (8, 12, 14, 16, 22mm)
|
|
|
Replacement Swaging Adapter for FS275M (8, 12, 14, 16, 22mm).
|
|
|
|
|
|
|
|
|
|
|
FSX508 CPS Replacement 3/4" Swaging Adapter for FS275
|
|
|
Replacement 3/4'' Swaging Adapter.
|
|
|
|
|
|
|
|
|
|
|
FSX509 CPS Replacement Yoke Assembly for FS275
|
|
|
Replacement Yoke Assembly for FS275.
|
|
|
|
|
|
|
|
|
|
|
FSX511 CPS Replacement Metric Flaring Bar for FS275M (4, 6, 8, 10, 12mm)
|
|
|
Replacement Metric Flaring Bar for FS275M (4, 6, 8, 10, 12mm).
|
|
|
|
|
|
|
|
|
|
|
FSX512 CPS Replacement Metric Flaring Bar for FS275M (14, 18, 22mm)
|
|
|
Replacement Metric Flaring Bar for FS275M (14, 18, 22mm).
|
|
|
|
|
|
|
|
|
|
FT195 CPS 45° Flaring Tool 3/16" to 5/8" O.D.
|
|
|
45° Flaring Tool for 3/16" to 5/8" O.D.
|
|
|
|
|
|
|
|
|
|
FT203 CPS 45° Flaring 5/8'', 3/4'', 7/8'', 1-1/8'' O.D.
|
|
|
45° Flaring 5/8'', 3/4'', 7/8'', 1-1/8'' O.D.
|
|
|
|
|
|
|
|
|
|
FT500M CPS Metric 45° Flaring and Burninshing Tool 6mm to 16mm O.D.
|
|
|
Faceted, hardened steel, chrome-finished cone rolls out perfect 45° flares above die block, and automatically burnishes flare face reducing the need for deburring. Original wall thickness is maintained at base of flare.
|
|
|
|
|
|
|
|
|
|
FT525 CPS 45° Universal Flaring Burnishing Tool 3/16" to 5/8" (4.75 to 16mm) O.D.
|
|
|
FT525 CPS 45° Universal Flaring Burnishing Tool 3/16" to 5/8" (4.75 to 16mm) O.D.
|
|
|
|
|
|
|
|
|
|
|
FT806A CPS Clutch-Type Eccentric Flaring Tool with Ratchet
|
|
|
Standard imperial clutch driven flaring tool with ratchet and case for 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4" O.D. tubing. Unique clutch driven feed screw and faceted cone produce uniform, clean flare walls without thin spots or galling. Clutch Type Concentric Flaring Tool engineered specifically to create stronger flare joints for higher pressure systems. Provides an exact amount of flaring torque with break away clutch system. Unique clutch driven feed screw and eccentrically mounted cone produces uniform, clean flare walls without galling. Exclusive 3/8”sq drive incorporated directly in yoke handle for use with ratchet (included). Innovative 3/8" square drive incorporated directly in yoke handle for use of ratchet. Rugged polyethylene storage case included.
|
|
|
|
|
|
|
|
|
|
FT806M CPS Metric Clutch Type Ecentric Flaring Tool With Ratchet
|
|
|
Standard metric clutch driven flaring tool with ratchet and case for 6, 8, 10, 12, 15, 16 & 18mm O.D. tubing. Unique clutch driven feed screw and faceted cone produce uniform, clean flare walls without thin spots or galling. Clutch Type Concentric Flaring Tool engineered specifically to create stronger flare joints for higher pressure systems. Provides an exact amount of flaring torque with break away clutch system. Unique clutch driven feed screw and eccentrically mounted cone produces uniform, clean flare walls without galling. Exclusive 3/8”sq drive incorporated directly in yoke handle for use with ratchet (included). Innovative 3/8" square drive incorporated directly in yoke handle for use of ratchet. Rugged polyethylene storage case included.
|
|
|
|
|
|
|
|
|
|
|
FTX500 CPS Yoke Assembly for CPS FT195
|
|
|
Yoke Assembly For FT195.
|
|
|
|
|
|
|
|
|
|
|
FTX501 CPS Flaring Bar for CPS FT195
|
|
|
FT195 - 1/2", 5/8", 3/16", 1/4", 5/16", 3/8", 7/16" Flaring Bar
|
|
|
|
|
|
|
|
|
|
|
FTX509 CPS Compressor Cone for CPS FT195
|
|
|
Compressor Cone for FT195.
|
|
|
|
|
|
|
|
|
|
|
FTX510 CPS Wing Nut for Flaring Bar for CPS FT195
|
|
|
Wing Nut for Flaring Bar for FT195
|
|
|
|
|
|
|
|
|
|
|
FTX513 CPS Yoke Assembly for CPS FT500
|
|
|
Yoke Assembly for FT500
|
|
|
|
|
|
|
|
|
|
|
FTX514 CPS Die Holder Assembly for CPS FT500
|
|
|
Die Holder Assembly for CPS FT500
|
|
|
|
|
|
|
|
|
|
|
FTX515 CPS Die Holder Assembly for CPS FT500M
|
|
|
Die Holder Assembly for CPS FT500M
|
|
|
|
|
|
|
|
|
|
|
FTX516 CPS Yoke Assembly for CPS FT525
|
|
|
Yoke Assembly For CPS FT525
|
|
|
|
|
|
|
|
|
|
|
FTX517 CPS Tube Holding Assembly for CPS FT525
|
|
|
Tube Holding Assembly For CPS FT525
|
|
|
|
|
|
|
|
|
|
|
FTX518 CPS Flaring Cone for CPS FT525
|
|
|
Flaring Cone for CPS FT525
|
|
|
|
|
|
|
|
|
|
|
TB12XH CPS Replacement Hook, Screw and Washer for TB12
|
|
|
Replacement Hook, Screw and Washer for CPS TB12.
|
|
|
|
|
|
|
|
|
|
TB14 CPS 7/8" Tube Bender
|
|
|
The CPS TB14 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement.
|
|
|
|
|
|
|
|
|
|
TB250 CPS Universal Ratcheting Tube Bender Kit with Reamer, Pipe Cutter, and Case
|
|
|
PRO-SET Universal Ratcheting Tube Bender for soft copper. aluminum, and light wall hydraulic tubing from 3/8" (6mm) to 7/8" (22mm). Includes Reamer, Premium Pipe Cutter (TC274), and Case.
|
|
|
|
|
|
|
|
|
|
TBS04 CPS 1/4" Spring Tube Bender
|
|
|
1/4" Spring Tube Bender
|
|
|
|
|
|
|
|
|
|
TBS05 CPS 5/16" Spring Tube Bender
|
|
|
5/16" Spring Tube Bender
|
|
|
|
|
|
|
|
|
|
TBS06 CPS 3/8" Spring Tube Bender
|
|
|
3/8" Spring Tube Bender
|
|
|
|
|
|
|
|
|
|
TBS08 CPS 1/2" Spring Tube Bender
|
|
|
1/2" Spring Tube Bender
|
|
|
|
|
|
|
|
|
|
TBS10 CPS 5/8" Spring Tube Bender
|
|
|
5/8" Spring Tube Bender
|
|
|
|
|
|
|
|
|
|
TBS12 CPS 3/4" Spring Tube Bender
|
|
|
3/4" Spring Tube Bender
|
|
|
|
|
|
|
|
|
|
TBXB1 CPS Small Replacement Bar for TB250
|
|
|
Small Replacement Bar for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXB2 CPS Large Replacement Bar for TB250
|
|
|
Large Replacement Bar for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXM10 CPS 3/8'' (10mm) Replacement Mandrel for TB250
|
|
|
3/8'' (10mm) Replacement Mandrel for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXM14 CPS 1/2'' (14mm) Replacement Mandrel for TB250
|
|
|
1/2'' (14mm) Replacement Mandrel for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXM16 CPS 5/8" (16mm) Replacement Mandrel for TB250
|
|
|
5/8" (16mm) Replacement Mandrel for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXM19 CPS 3/4" (19mm) Replacement Mandrel for TB250
|
|
|
3/4" (19mm) Replacement Mandrel for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXM22 CPS 7/8" (22mm) Replacement Mandrel for TB250
|
|
|
7/8" (22mm) Replacement Mandrel for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXM6 CPS 1/4" (6mm) Replacement Mandrel for TB250
|
|
|
1/4" (6mm) Replacement Mandrel for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXM8 CPS 5/16" (8mm) Replacement Mandrel for TB250
|
|
|
5/16" (8mm) Replacement Mandrel for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TBXR CPS Replacement Ratchet Mechanism for TB250
|
|
|
Replacement Ratchet Mechanism for CPS TB250.
|
|
|
|
|
|
|
|
|
|
TC100 CPS Ratchet Tube Cutter
|
|
|
CPS PRO-SET ratchet tube cutter. Adjustable tubing cutter with ergonomic handle. Ratcheting mechanism for cutting in confined spaces. Quality hardened steel cutting blade provides long life. Cuts tubes as small as 1/4" (6mm) to as large as 7/8'' (23mm).
|
|
|
|
|
|
|
|
|
|
TC174 CPS "Big-Mini" Tube Cutter 3/8" to 1-1/8"
|
|
|
PRO-SET Premium Big-Mini Tube Cutter. Compact yet easy to grip. Wide flare cut-off groove to accommodate flares on large size tubing. Can cut tubes as small as 3/8'' (9.5mm) to as large as 1-1/8'' (28mm).
|
|
|
|
|
|
|
|
|
|
TCPVC CPS Ratcheting PVC Tube Cutter
|
|
|
The CPS TCPVC Ratcheting PVC tube cutter features a capacity up to 2". Cuts CPVC, PVC, & rubber tubing. Heavy duty all metal construction.
|
|
|
|
|
|
|
|
|
|
TCT127 CPS HD Mini Tube Cutter 1/8" to 5/8"
|
|
|
HD Mini Tube Cutter 1/8" to 5/8". For Hard or Soft Tubing - Copper, Aluminum, Brass, Stainless Steel. All cutter wheels are precision machined from high grade chromium steel and plated with Titanium Nitride to increase life up to 5 times longer. Precision machined rollers feature cut-off groove to reduce tube loss in damaged flare removal. Durable metal handle with industrial grade rubber boot provides sure comfortable grip. Enclosed hardened steel, thrust bearing feed mechanism for smooth cutting action and trouble free operation. Produces clean right angle cuts every time.
|
|
|
|
|
|
|
|
|
|
TCT174 CPS HD Tube Cutter 1/8" to 1 1/8"
|
|
|
HD Tube Cutter 1/8" to 1 1/8". For Hard or Soft Tubing - Copper, Aluminum, Brass, Stainless Steel. All cutter wheels are precision machined from high grade chromium steel and plated with Titanium Nitride to increase life up to 5 times longer. Precision machined rollers feature cut-off groove to reduce tube loss in damaged flare removal. Durable metal handle with industrial grade rubber boot provides sure comfortable grip. Integrated retractable and replaceable rotary reamer tool for ease in deburring pipe. Enclosed hardened steel, thrust bearing feed mechanism for smooth cutting action and trouble free operation. Produces clean right angle cuts every time.
|
|
|
|
|
|
|
|
|
|
TCT206 CPS HD Sliding Tube Cutter 1/4" to 2 5/8" O.D.
|
|
|
HD Sliding Tube Cutter 1/4" to 2 5/8" O.D. For Hard or Soft Tubing - Copper, Aluminum, Brass, Stainless Steel. All cutter wheels are precision machined from high grade chromium steel and plated with Titanium Nitride to increase life up to 5 times longer. Precision machined rollers feature cut-off groove to reduce tube loss in damaged flare removal. Durable metal handle with industrial grade rubber boot provides sure comfortable grip. Integrated retractable and replaceable rotary reamer tool for ease in deburring pipe. Enclosed hardened steel, thrust bearing feed mechanism for smooth cutting action and trouble free operation. Produces clean right angle cuts every time.
|
|
|
|
|
|
|
|
|
|
TCT274 CPS HD Tube Cutter 1/8" to 1 3/8" O.D.
|
|
|
HD Tube Cutter 1/8" to 1 3/8" O.D. For Hard or Soft Tubing - Copper, Aluminum, Brass, Stainless Steel. All cutter wheels are precision machined from high grade chromium steel and plated with Titanium Nitride to increase life up to 5 times longer. Precision machined rollers feature cut-off groove to reduce tube loss in damaged flare removal. Durable metal handle with industrial grade rubber boot provides sure comfortable grip. Integrated retractable and replaceable rotary reamer tool for ease in deburring pipe. Enclosed hardened steel, thrust bearing feed mechanism for smooth cutting action and trouble free operation. Produces clean right angle cuts every time.
|
|
|
|
|
|
|
|
|
|
TCT312 CPS HD Tube Cutter 1/8" to 1 3/4"
|
|
|
HD Tube Cutter 1/8" to 1 3/4" For Hard or Soft Tubing - Copper, Aluminum, Brass, Stainless Steel. All cutter wheels are precision machined from high grade chromium steel and plated with Titanium Nitride to increase life up to 5 times longer. Precision machined rollers feature cut-off groove to reduce tube loss in damaged flare removal. Durable metal handle with industrial grade rubber boot provides sure comfortable grip. Integrated retractable and replaceable rotary reamer tool for ease in deburring pipe. Enclosed hardened steel, thrust bearing feed mechanism for smooth cutting action and trouble free operation. Produces clean right angle cuts every time.
|
|
|
|
|
|
|
|
|
|
TCX100CS CPS Replacement Cutting Wheel and Screw for TC100
|
|
|
Replacement Cutting Wheel and Screw for CPS TC100.
|
|
|
|
|
|
|
|
|
|
|
TCX6CTS CPS Titanium Cutting Wheel and Screw for TC206
|
|
|
Titanium Cutting Wheel and Screw for CPS TC206.
|
|
|
|
|
|
|
|
|
|
|
TCXT127C CPS (1) TIN Cutting Wheel & (1) Screw - TCT127
|
|
|
(1) TIN Cutting Wheel & (1) Screw - TCT127
|
|
|
|
|
|
|
|
|
|
|
TCXT174C CPS (1) TIN Cutting Wheel & (1) Screw - TCT174
|
|
|
(1) TIN Cutting Wheel & (1) Screw - TCT174
|
|
|
|
|
|
|
|
|
|
|
TCXT206C CPS (1) TIN Cutting Wheel & (1) Screw - TCT206
|
|
|
(1) TIN Cutting Wheel & (1) Screw - TCT206
|
|
|
|
|
|
|
|
|
|
|
TCXT274C CPS (1) TIN Cutting Wheel & (1) Screw Assembly - TCT274
|
|
|
(1) TIN Cutting Wheel & (1) Screw Assembly - TCT274
|
|
|
|
|
|
|
|
|
|
|
TCXT312C CPS (1) TIN Cutting Wheel & (1) Screw Assembly - TCT312
|
|
|
(1) TIN Cutting Wheel & (1) Screw Assembly - TCT312
|
|
|
|
|
|
|
|
|
|
TCXTRB CPS Replacement Reamer Blade for TCT274 / TC312
|
|
|
Replacement Reamer Blade for TCT274 / TC312
|
|
|
|
|
|
|
|
|
|
TLDB CPS Plastic Handle Deburring Tool
|
|
|
Plastic Handle Deburring Tool
|
|
|
|
|
|
|
|
|
|
TLDB2 CPS Metal Pocket Deburring Tool
|
|
|
Metal Pocket Deburring Tool
|
|
|
|
|
|
|
|
|
|
TLDBX CPS Replacement Blade for TLDB
|
|
|
Replacement Blade for CPS TLDB
|
|
|
|
|
|
|
|
|
|
TLE6 CPS Multi-Head Tube Expander and Swaging Set
|
|
|
The PRO-SET tube expander and swaging set can create professional grade one-seam pipe unions in the field. Salvage shorts and scrap to make couplings and re-round deformed tube ends. Multi-facted interchangeable heads ensures equal linear expansion of tube and uniformed wall thickness. Large handle length provides additional leverage for ease of use. Components are heated treated for durability and included storage case provides long-term protection. Ideal for copper, aluminum and soft steel tubing.
|
|
|
|
|
|
|
|
|
|
TLH06 CPS TLE6 Expander Replacement Head 3/8"
|
|
|
3/8" Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLH08 CPS TLE6 Expander Replacement Head 1/2"
|
|
|
1/2" Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLH10 CPS TLE6 Expander Replacement Head 5/8"
|
|
|
5/8'' Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLH12 CPS TLE6 Expander Replacement Head 3/4"
|
|
|
3/4" Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLH14 CPS TLE6 Expander Replacement Head 7/8"
|
|
|
7/8'' Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLH16 CPS TLE6 Expander Replacement Head 1"
|
|
|
1'' Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLH18 CPS TLE6 Expander Replacement Head 1-1/8"
|
|
|
1 1/8'' Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLH22 CPS TLE6 Expander Replacement Head 1-3/8"
|
|
|
1 3/8'' Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLH26 CPS TLE6 Expander Replacement Head 1-5/8"
|
|
|
1 5/8'' Expander Head for CPS TLE6.
|
|
|
|
|
|
|
|
|
|
TLMSP CPS All-In-1 Swaging Punch Tool
|
|
|
All-In-One swaging punch tool includes six sizes of swaging ends on one tool. Designed to enlarge one end of copper tubing to make a connection without a fitting. Gives you one solder join - not two - cutting time spent soldering or brazing in half! Sizes for 3/16'', 1/4'', 5/16'', 3/8'', 1/2'', and 5/8''.
|
|
|
|
|
|
|
|
|
|
TLPK CPS Swaging Punch Kit - Set of 5
|
|
|
Set of 5 Swaging Punches: 5/8', 1/2'', 3/8'', 5/16'' and 1/4''.
|
|
|
|
|
|
|
|
|
|
TLPO CPS Pinch-Off Pliers
|
|
|
Pinch-Off Pliers
|
|
|
|
|
|
|
|
|
|
FTX800B410 CPS FT800FN - R-410A Imperial Flaring Bar
|
|
|
FTX800B410 CPS FT800FN - R-410A Imperial Flaring Bar
|
|
|
|
|
|
|
|
|
|
BTB300 CPS Blackmax Ratcheting Tube Bender With Reverse Bend 1/4" - 7/8"
|
|
|
BTB300 CPS Blackmax Ratcheting Tube Bender With Reverse Bend 1/4" - 7/8". Introducing BlackMAX tubing tools- a new line of unique featured, premium grade, and hard-working tubing tools from CPS. Used for cutting, deburing, flaring, expanding and bending soft copper and aluminum tubing. BlackMAX tubing tools also include a line of 2 and 3 jaw gear pullers. Premium form, function and ergonomics at affordable prices. Try them today and see the difference! Premium Ratcheting.
|
|
|
|
|
|
|
|
|
|
BTBXR1 CPS Replacement Reverse Bender Mandrel Arm (Imperial & Metric)
|
|
|
BTBXR1 CPS Replacement Reverse Bender Mandrel Arm (Imperial & Metric)
|
|
|
|
|
|
|
|
|
|
BTBXA2 CPS Shoe Arm 1/2"-7/8" (12mm-22mm) Shoes
|
|
|
BTBXA2 CPS Shoe Arm 1/2"-7/8" (12mm-22mm) Shoes
|
|
|
|
|
|
|
|
|
|
BTBX78 CPS Aluminum Mandrel (7/8") for BTB300
|
|
|
BTBX78 CPS Aluminum Mandrel (7/8") for BTB300
|
|
|
|
|
|
|
|
|
|
BTBX12 Aluminum Mandrel (1/2") for BTB300
|
|
|
BTBX12 Aluminum Mandrel (1/2") for BTB300
|
|
|
|
|
|
|
|
|
|
BTBX14 Aluminum Mandrel (1/4") for BTB300
|
|
|
BTBX14 Aluminum Mandrel (1/4") for BTB300
|
|
|
|
|
|
|
|
|
|
BTBX34 Aluminum Mandrel (3/4") for BTB300
|
|
|
BTBX34 Aluminum Mandrel (3/4") for BTB300
|
|
|
|
|
|
|
|
|
|
BTBX38 Aluminum Mandrel (3/8") for BTB300
|
|
|
BTBX38 Aluminum Mandrel (3/8") for BTB300
|
|
|
|
|
|
|
|
|
|
BTBX516 Aluminum Mandrel (5/16") for BTB300
|
|
|
BTBX516 Aluminum Mandrel (5/16") for BTB300
|
|
|
|
|
|
|
|
|
|
BTBX58 Aluminum Mandrel (5/8") for BTB300
|
|
|
BTBX58 Aluminum Mandrel (5/8") for BTB300
|
|
|
|
|
|
|
|
|
|
BTBXA1 Replacement Shoe Arm With 1/4"-3/8" Shoes BTB300
|
|
|
BTBXA1 Replacement Shoe Arm With 1/4"-3/8" Shoes BTB300
|
|
|
|
|
|
|
|
|
|
BTBXR2 CPS Replacement Reverse Bender Shoe Arm
|
|
|
BTBXR2 CPS Replacement Reverse Bender Shoe Arm
|
|
|
|
|
|
|
|
|
|
20206 FJC Inc. Mini Tube Cutter 1/8" to 5/8" (4-15mm) OD Tubing (Each)
|
|
|
Mini Tube Cutter 1/8" to 5/8" (4-15mm) OD Tubing
|
|
|
|
|
|
|
|
|
|
20208 FJC Inc. Mini Tube Cutter 1/8" to 7/8" (4-15mm) OD Tubing (Each)
|
|
|
Mini Tube Cutter 1/8" to 7/8" (4-15mm) OD Tubing
|
|
|
|
|
|
|
|
|
|
20382 FJC Inc. Universal Swaging Punch 5 in 1 Tool (1/4",5/16",3/8",1/2", and 5/8" OD) (Each)
|
|
|
Universal Swaging Punch 5 in 1 Tool (1/4",5/16",3/8",1/2" & 5/8" OD): This tool is like having 5 swaging tools in one allowing for more room for other tools in your tool box.
|
|
|
|
|
|
|
|
|
|
20388 FJC Inc. Swaging Punch Tool - 3/4" Tubing (Each)
|
|
|
Swaging Punch Tool - 3/4" Tubing
|
|
|
|
|
|
|
|
|
|
20520 FJC Inc. 3 in 1 Lever Tube Bender 180 Degree, Size: 1/4", 5/16", and 3/8" (Each)
|
|
|
3 in 1 Lever Tube Bender 180 Degree Size: 1/4" 5/16" & 3/8": This tube bender will allow you to bend 1/4", 5/16" and 3/8" tubing up to 180 degree angles with index marks for the most accurate bends.
|
|
|
|
|
|
|
|
|
|
20597 FJC Inc. Spring Tube Benders - for 3/4" Tubing (Each)
|
|
|
Spring Tube Benders - for 3/4" Tubing: For fast bending of soft copper and aluminum tubing.
|
|
|
|
|
|
|
|
|
|
20748 FJC Inc. Pinch-Off Pliers (Each)
|
|
|
Pinch-Off Pliers: These pliers are typically used in emergency situations to pinch off leaks.
|
|
|
|
|
|
|
|
|
|
131 General Tapered Reamer (1/8" To 1/2")
|
|
|
This tool reams as well as deburrs, aligns and enlarges holes 1/8 to 1/2_ in diameter. Accurately ground tempered “Steel Tool” with 3-1/2_ blade. Always turn clockwise and use cutting oil for best results.
|
|
|
|
|
|
|
|
|
|
FS Hilmor Quick-Engage Tube Flare+Swage Kit 1838947
|
Price $142.50 Sale Price: $85.50
|
|
|
 FS Hilmor Quick-Engage Tube Flare+Swage Kit 1838947: Every second counts on the job. That’s exactly what inspired the folks at hilmor to create the hilmor Quick-Engage Flare and Swage Kit. It’s all about easy. Just push down the yoke to engage the tube, and with fewer rotations than your current tool, you’ve got a precise flare or swage. An innovative spring-loaded block holds the tube firmly in place.
|
|
|
|
|
|
|
|
|
|
S1458 Hilmor Punch Swage Set 1/4" To 5/8" 5Pc 1839008
|
Price $33.30 Sale Price: $19.98
|
|
|
S1458 Hilmor Punch Swage Set 1/4" To 5/8" 5Pc 1839008: Get the sizes you need, right when you need them with the hilmor 5-piece Punch Swage Set. Punches are available in a set with 1/4”, 5/16”, 3/8”, 1/2” and 5/8”. All sizes are equipped with a longer lead-in for an easier setup. They also include a wide head that makes the tool easier to hold and hit.
|
|
|
|
|
|
|
|
|
|
CBM14 Hilmor Compact Tube Bender Mandrel 1/4" 1839035
|
Price $11.98 Sale Price: $7.19
|
|
|
CBM14 Hilmor Compact Tube Bender Mandrel 1/4" 1839035
|
|
|
|
|
|
|
|
|
|
CBM516 Hilmor Compact Tube Bender Mandrel 5/16" 1839036
|
Price $11.98 Sale Price: $7.19
|
|
|
CBM516 Hilmor Compact Tube Bender Mandrel 5/16" 1839036
|
|
|
|
|
|
|
|
|
|
CBM12 Hilmor Compact Tube Bender Mandrel 1/2" 1839038
|
Price $14.98 Sale Price: $8.99
|
|
|
CBM12 Hilmor Compact Tube Bender Mandrel 1/2" 1839038
|
|
|
|
|
|
|
|
|
|
CBM58 Hilmor Compact Tube Bender Mandrel 5/8" 1839039
|
Price $14.98 Sale Price: $8.99
|
|
|
CBM58 Hilmor Compact Tube Bender Mandrel 5/8" 1839039
|
|
|
|
|
|
|
|
|
|
11509 JB Industries Cool Gel - Quart - Each
|
|
|
Heat dissipating spray helps prevent heat damage to components and surrounding materials during soldering, brazing, and welding. It protects painted and finished surfaces from discoloration due to adjacent torch operations. This product also reduces the danger of fire to surrounding surfaces such as studs, drywall, and insulation. The unique non-staining gelled formula sticks to surfaces without dripping or running off and leaves no residue. Safe, non-toxic, and odorless spray liberally on adjacent surfaces needing protection. The spray pattern is adjustable from stream to mist.
|
|
|
|
|
|
|
|
|
|
BS-10 JB Industries Bending Spring For 5/8" OD Tubing - Each
|
|
|
BS-10 JB Industries Bending Spring For 5/8" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
|
BS-12 JB Industries Bending Spring For 3/4" OD Tubing - Each
|
|
|
BS-12 Bending Spring For 3/4" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
|
BS-4 JB Industries Bending Spring For 1/4" OD Tubing - Each
|
|
|
BS-4 Bending Spring For 1/4" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
|
BS-5 JB Industries Bending Spring For 5/16" OD Tubing - Each
|
|
|
BS-5 Bending Spring For 5/16" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
BS-55 JB Industries 1/4", 5/16", 3/8", 1/2", 5/8" Bending Springs In Pouch - Each
|
|
|
BS-55 1/4" 5/16" 3/8" 1/2" 5/8" Bending Springs Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
|
BS-6 JB Industries Bending Spring For 3/8" OD Tubing - Each
|
|
|
BS-6 JB Industries Bending Spring For 3/8" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
|
BS-7 JB Industries Bending Spring For 7/16" OD Tubing - Each
|
|
|
BS-7 Bending Spring For 7/16" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
BS-77 JB Industries All 7 Sizes Bending Springs In Pouch - Each
|
|
|
BS-77 JB Industries Tube Bending Springs In Pouch All 7 Sizes Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
|
BS-8 JB Industries Bending Spring For 1/2" OD Tubing - Each
|
|
|
BS-8 JB Industries Bending Spring For 1/2" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.
|
|
|
|
|
|
|
|
|
|
PS-10 JB Industries 10' Steel Strap - Each
|
|
|
10' (3 M) steel strap. Zinc plated and alternate between nail and bolt holes. Made in the USA.
|
|
|
|
|
|
|
|
|
|
PS-25 JB Industries 25' Steel Strap - Each
|
|
|
25' (7.6 M) steel strap. Zinc plated and alternate between nail and bolt holes. Made in the USA.
|
|
|
|
|
|
|
|
|
|
PS-50 JB Industries 50' Steel Strap - Each
|
|
|
50' (15 M) steel strap . Zinc plated and alternate between nail and bolt holes. Made in the USA.
|
|
|
|
|
|
|
|
|
|
RT11006 JB Industries Reamer Deburring Tool 1/8" - 1 1/2" - Each
|
|
|
Heavy duty universal internal/external deburring tool for copper and plastic pipes 1/8'' to 1-3/8'' O.D. by JB (RT11006). Has a polished cutting bit made of hardened special steel and is smooth running. Made from the highest quality materials set against the strictest German standards to render the best and most reliable tools in the marketplace. Backed by a 24-month over the counter warranty, we stand behind these products as if we were putting the JB name on it.
|
|
|
|
|
|
|
|
|
|
RT12318 JB Industries Tube Expander Kit - Each
|
|
|
Tube expander for 3/8'', 1/2'', 5/8'', 3/4'', 7/8'', and 1-1/8'' soft copper, half-hard copper, and soft-aluminum tubes. Ideal for efficient, fitting-tree tube installation in plumbing, heating, gas, refrigeration, and climate control applications. The longer lever arms reduce the effort required and increase the work space. High strength, forged aluminum body results in easy handling and lower weight. Automatic ping guide retraction provides faster operation. Ping guide has golden titanium nitride coasting that provides high degree of hardness, lowers friction, protects from corrosion, and long lasting. The riveted expander heads are beveled at segment ends to allow recalibration of unround tubes and fittings. The extra long segments ensure proper coupling dimensions. The 6 rivets and guide channels guarantee perfect centering and uniform capillary gap.
|
|
|
|
|
|
|
|
|
|
RT21652 JB Industries Replacement Deburring Blade - Each
|
|
|
RT21652 JB Industries replacement deburring blade for use in RT70027, RT70029, RT0030 and RT70142.
|
|
|
|
|
|
|
|
|
|
RT21652B JB Industries Replacement Deburring Blades - 10 Pack
|
|
|
Ten pack of replacement deburring blades for use in RT70027, RT70029, RT0030 and RT70142.
|
|
|
|
|
|
|
|
|
|
RT21655 JB Industries Tube Deburring Tool - Each
|
|
|
RT21655 JB Industries Tube De-burring Tool designed for fast de-burring of edges, tubes and sheets; features swiveling replaceable blades. Deburring tool with high speed steel deburring blade. The blade on this deburring tool is replaceable, use RT21652B.
|
|
|
|
|
|
|
|
|
|
RT22124 JB Industries Tee Extractor Set - Each
|
|
|
Efficient tube installation without fittings in plumbing, refrigeration and air conditioning. key features, No fittings to buy or store, 50% time saving and labor cost, 67% saving in brazing time and material. Branches can be made on installed tube without dismantling or cutting IAPMO listed. In steel carrying case containing Tee extractor, special ratchet, UNIDRILL Automatic 42 and cam pincer.
Note: Tees can be pulled size for size up to 1". Larger sizes use one size smaller. If using small sizes to pull tees out of large diameter tube, tube may have to be annealed.
|
|
|
|
|
|
|
|
|
|
RT222402 JB Industries 45 Adj. Flaring Tool - 3/16" to 5/8" - Each
|
|
|
Professional Flaring Tool For producing precision 45° single flares on copper tubes, Certified for R410A. Set includes flaring tool with mold, plastic case. O.D. Tube Sizes: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8"
|
|
|
|
|
|
|
|
|
|
RT222601 JB Industries 45 Adj. Flaring Tool - 1/8" to 3/4" - Each
|
|
|
Professional Flaring Tool For producing precision 45° single flares on copper tubes, Certified for R410A. Set includes flaring tool with mold, plastic case. O.D. Tube Sizes: 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4"
|
|
|
|
|
|
|
|
|
|
RT23022 JB Industries Maxi Tube Bender Set - Each
|
|
|
Maxi tube bender set for 3/8'', 1/2'', 5/8'', 3/4'', and 7/8'' soft copper and aluminum. Exact bending up to 90 degrees. Can be used in plumbing and heating installations, refrigeration, climate control, floor heating, and hydraulic systems. The open bending frame allows for the production of repeated alternate angled bends. The smooth-running feed lever is sealed in restricted places and for one handed operation. The side lever gives a quick release and reset of bending former. set includes basic tool, bending support, bending formers for 3/8'', 1/2'', 5/8'', 3/4'', 7/8'', a a steel carrying case.
|
|
|
|
|
|
|
|
|
|
|
RT24114 JB Industries Tube Bender Set - Each
|
|
|
RT24114 Tube Bender Set
|
|
|
|
|
|
|
|
|
|
RT24504 JB Industries RoBend - Each
|
|
|
Tube bending set for 1/2'', 5/8'', and 7/8'' soft and hard copper, thin-walled coated copper, aluminum, brass, precision steel, and coated seamless stainless steel tubes. Exact cold bending up to 180º degrees. The unique design provides bending without deforming the pipe. The patented anti-stick system requires 42% less effort due to the lower friction and optimum distribution of the bending spray. The combination of guide shoe and bending former reduces the effort in bending without deformation or wrinkles. This base plate can be attached with additional handle for free hand bending up to 5/8'' diameter. The set includes bending formers for 12'', 5/8'' and 7/8'', bending spray and a steel carrying case.
|
|
|
|
|
|
|
|
|
|
RT25131 JB Industries Standard Tube Bender 5/16" OD - Each
|
|
|
Standard tube bender for 5/16'' OD soft copper and aluminum. Radius 0.95 inches, Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation.
|
|
|
|
|
|
|
|
|
|
RT25136 JB Industries Standard Tube Bender 5/8" OD - Each
|
|
|
Standard tube bender for 5/8'' OD soft copper and aluminum. Radius 2.28 inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation.
|
|
|
|
|
|
|
|
|
|
RT25140 JB Industries Standard Tube Bender 1/4" OD - Each
|
|
|
Standard tube bender for 1/4'' OD soft copper and aluminum. Radius 0.71 inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation.
|
|
|
|
|
|
|
|
|
|
RT25141 JB Industries Standard Tube Bender 3/8" OD - Each
|
|
|
Standard tube bender for 3/8'' OD soft copper and aluminum. Radius 1.18 inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation.
|
|
|
|
|
|
|
|
|
|
RT25142 JB Industries Standard Tube Bender 1/2" OD - Each
|
|
|
The RT25142 Pro tube bender for 1/2'' OD semi-hard / Hard copper. Radius 1/2" inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation. The light construction results in fatigue-free hand operation. The clamp mechanism better holds the tube and enables the bending of even the shortest of tube pieces. The Tube Bender Pro is for 1/2" and 3/4" semi-hard and hard copper pipes and features a case iron body for longer life along with self adjusting shoe.
|
|
|
|
|
|
|
|
|
|
RT25151 JB Industries Tube Bender - Each
|
|
|
Mini tube bender for 1/4'', 5/16'', and 3/8'' OD soft copper, brass, and aluminum. Ideal for refrigeration, climate control, oil supply, automobile, hydraulic, and air pressure systems. Exact, two-handed bending up to 180º degrees. Minimum measurement and bending radius display on former for exact bending.
|
|
|
|
|
|
|
|
|
|
|
RT26033 JB Industries RoFlare Swing Release Flare Tool - 3/16" - 5/8" Single/Double - Each
|
|
|
RoFlare Flare Tool 3/16" 5/8" Single/Double
|
|
|
|
|
|
|
|
|
|
RT26036 JB Industries RoFlare Swing Release Flare Tool - 3/16" - 5/8" Single - Each
|
|
|
The RT26036 JB Industries RoFlare Swing Release Flare Tool makes precision production of 45° single flares on copper, brass, aluminum and soft steel tubes a breeze. For tube sizes 45° 3/16" - 1/4" - 5/16" - 3/8" - 1/2" - 5/8" . Perfect for refrigeration work. The tool lets you create 45-degree single flares on soft- and hard-drawn copper tubing, plus brass, aluminum, and thin-walled steel piping. You'll save on fittings, soldering, and labor with this one. The universal coupling with spherical locking device is great for simple, rapid changeover of your cone and expander pin. 45° and 180° double flares are also possible when used in conjunction with ROFLARE double-flare inserts; "Multiblock" multi-clamping facility and secure eccentric quick tensioning device for tubes. Hardened clamp jaws and cone. Automatic self-centering.
|
|
|
|
|
|
|
|
|
|
RT26715 JB Industries Swaging Kit - Each
|
|
|
For production of precise 45° single flares and precision sockets on copper, brass, aluminum, and precision steel tubes. Set includes basic tool, 45° cone, expander pin, internal and external deburrer, tube cutter, and plastic case. For 3/16", 1/4", 5/16", 3/8", 1/2", and 5/8" O.D. Tubing.
|
|
|
|
|
|
|
|
|
|
RT52000 JB Industries Pipe Shears - 1 5/8" - Each
|
|
|
For sched. 40 1-1/4'' PVC with a maximum 1-5/8'' OD this pipe shear cuts PVC, PP, PE, PEX, PB, and PVDF. These shears are the finest you can find in the market. The quick release lever provides automatic opening of the blade at the push of a button. Ideally messed cutting curve provides for minimum effort during the cutting operation. The double sided stainless steel blade with v-shaped edge provides for minimum effort during the cutting operation. The double sided stainless steel blade ensures a square cut every time. For replacement blade use RT52042. The locking lever secures the blade during transport.
|
|
|
|
|
|
|
|
|
|
RT52010 JB Industries Pipe Shears - 2" - Each
|
|
|
For sched. 40 1-1/2'' PVC with a maximum 2'' OD this pipe shear precisely cuts PVC, PP, PE, PEX, PB, AND PVDF. These shears are the finest you can find in the market. The quick release lever provides automatic opening of the blade at the push of a button. Ideally meshed cutting curve provides for minimum effort during the cutting operation. The double sided stainless steel blade with v-shaped edge provides pin point accuracy and pierces the pipe to prevent deformation of tube. The wide pipe rest ensures a square cut every time.
|
|
|
|
|
|
|
|
|
|
|
RT52011 JB Industries Replacement Blade for RT52010 - Each
|
|
|
Replacement cutter blade for use in RT52010.
|
|
|
|
|
|
|
|
|
|
|
RT52042 JB Industries Replacement Blade for TR52000 - Each
|
|
|
Replacement cutter blade for use in RT52000.
|
|
|
|
|
|
|
|
|
|
RT70007X JB Industries Replacement cutter wheel (pkg of 10) - Each
|
|
|
Ten pack of replacement cutter wheels for use in RT70020 and RT70021.
|
|
|
|
|
|
|
|
|
|
RT70015 JB Industries MiniMax Tube Cutter 1/8" to 7/8" - Each
|
|
|
Copper mini max tube cutter for 1/8'' to 1-1/8'' OD by JB (RT70015). Used for cutting copper tubes, these cutters have a large knurled knob and a handy design that produce fatigue-free pressure control. There are two recessed guide rollers that assist with cutting close to flares.
|
|
|
|
|
|
|
|
|
|
|
RT70017 JB Industries Replacement Tube Cutter Wheel MiniMax Cutter - Each
|
|
|
RT70017 JB Industries Replacement Tube Cutter Wheel MiniMax Cutter - Each. For use in RT70401, RT70402, RT70105, RT70105, RT70015, RT70027, RT70029, and RT70030.
|
|
|
|
|
|
|
|
|
|
|
RT70017D JB Industries Replacement cutter wheel for MiniMax cutter (pkg of 5)
|
|
|
RT70017D JB Industries Replacement cutter wheel for MiniMax cutter (pkg of 5). For use in RT70401, RT70402, RT70105, RT70105, RT70015, RT70027, RT70029, and RT70031.
|
|
|
|
|
|
|
|
|
|
RT70020 JB Industries Tube Cutter 1/8" to 1 1/8" - Each
|
|
|
JB Branded copper tube cutter for 1/8'' to 1-1/8'' OD. Precision tube cuter made exclusively for JB by Rothenberger. Designed with smooth-running, telescopic action for a consistent working radius. Features include a rolling stop which protects the cutting wheel, a protected screw spindle to shield against dirt and jamming, and a lightweight cast aluminum body. The deburrer swivels up and space cutter wheel is stored in handle.
|
|
|
|
|
|
|
|
|
|
RT70021 JB Industries Tube Cutter 1/4" to 1 5/8" - Each
|
|
|
JB Branded copper tube cutter for 1/4'' to 1-5/8'' OD. Precision tube cutter made exclusively for JB by Rothenberger. Designed with smooth-running, telescopic action for a consistent working radius. Features included a rolling stop which protects the cutting wheel, a protected screw spindle to shield against dirt and jamming, and a lightweight cast aluminum body. The deburrer swivels up and spare cutter wheel is stored in handle.
|
|
|
|
|
|
|
|
|
|
RT70027 JB Industries Tube Cutter 1/4" to 1 3/8" - Each
|
|
|
Professional copper and aluminum tube cutter for 1/4'' to 1-3/8'' OD. For tubes made from copper, aluminum, or brass, this tube cutter features a retractable deburrer blade and spare cutter wheel in the handle.
|
|
|
|
|
|
|
|
|
|
RT70029 JB Industries Tube Cutter 1/4" to 1 5/8" - Each
|
|
|
Professional copper and aluminum tube cutter for 1/4'' to 1-5/8'' OD. For tubes made from copper, aluminum, or brass, this tube cutter features a retractable deburrer blade and spare cutter wheel in the handle.
|
|
|
|
|
|
|
|
|
|
RT70030 JB Industries Tube Cutter 1/8" to 2 5/8" - Each
|
|
|
Ratchet tube cutter for 1/8'' to 2-5/8'' OD. For tubes made from copper, aluminum, brass, thin-walled steel, and plastic coated tubes this tube cutter features a retractable internal deburrer blade and spare cutter wheel in the handle. The ratchet telescopic guide with automatic spring-driven withdraw allows for quick adjustment and fast opening.
|
|
|
|
|
|
|
|
|
|
|
RT70056 JB Industries Replacement cutter wheel for stainless steel - Each
|
|
|
RT70056 Replacement Cutter Wheel Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
RT70056D JB Industries Replacement cutter wheel for stainless steel ( pkg of 10) - Each
|
|
|
Five pack of replacement cutting wheels for cutting stainless steel pipe. For use in RT70027 and RT70029.
|
|
|
|
|
|
|
|
|
|
|
RT70057 JB Industries Replacement cutter wheel for RT70142 - Each
|
|
|
RT70057 Replacement cutter wheel for RT70142
|
|
|
|
|
|
|
|
|
|
RT70105 JB Industries Tube Cutter 1/4" to 7/8" - Each
|
|
|
Copper mini tube cutter for 1/8'' to 7/8'' OD. Used for cutting copper tubes, these cutters have a large knurled know and a handy design that produces fatigue-free pressure control. There are two recessed guide rollers that assist with cutting close to flares.
|
|
|
|
|
|
|
|
|
|
RT70142 JB Industries Tube Cutter 2" to 5" - Each
|
|
|
Ratchet tube cutter for 1/8'' to 2-5/8'' OD. For tubes made from copper, aluminum, brass, thin-walled steel, and plastic coated tubes. This tube cutter features a retractable internal deburrer blade and spare cutter wheel in the handle. The ratchet telescopic guide with automatic spring-driven withdrawal allows for quick adjustment and fast opening.
|
|
|
|
|
|
|
|
|
|
RT70401 JB Industries Tube Cutter 1/8" to 5/8" - Each
|
|
|
Copper tube cutter for 1/8'' to 5/8'' OD. Used for cutting copper tubes, these cutters have a large knurled knob and a handy design that produces fatigue-free pressure control. There are two recessed guide rollers that assist with cutting close to flares.
|
|
|
|
|
|
|
|
|
|
RT70402 JB Industries Tube Cutter 1/4" to 7/8" - Each
|
|
|
Copper tube cutter for 1/4'' to 7/8'' OD. Used for cutting copper tubes, these cutters have a large knurled knob and a handy design that produce fatigue-free pressure control. There are two recessed guide rollers that assist with cutting close to flares.
|
|
|
|
|
|
|
|
|
|
RT70558 JB Industries Multi-Purpose Pliers - Each
|
|
|
Ro-Grip self adjusting multi-purpose 10'' pliers. Optimal for use on various forms of material up to 1-5/8'' OD. With a perfect grip and better leverage, these self-adjusting pliers offer many advantages over conventional pliers, Leverage provides optimum force transmission. Double hardened teeth put a firm hold on any surface. One handed operation even on larger diameter tubes.
|
|
|
|
|
|
|
|
|
|
RT88802 JB Industries Tube Cutter 7/8" - Each
|
|
|
Pipeslice tube cutter for 7/8'' OD. For tubes made from copper this is the easiest tube cutter on the market. Simply snap the pipeslice on the tube and turn. Self-clamping and self-adjusting there is no re-adjustment necessary. Quickly cuts tube and is ideal for the hardest to reach places.
|
|
|
|
|
|
|
|
|
|
RT88807 JB Industries Tube Cutter 1/2" - Each
|
|
|
Pipeslice tube cutter for 1/2'' OD. For tubes made from copper this is the easiest tube cutter on the market. Simply snap the pipeslice on the tube and turn. Self-clamping and self-adjusting there is no re-adjustment necessary. Quickly cuts tube and id ideal for the hardest to reach places.
|
|
|
|
|
|
|
|
|
|
RT88808 JB Industries Tube Cutter 3/4" - Each
|
|
|
Pipeslice tube cutter for 3/4'' OD. For tubes made from copper this is the easiest tube cutter on the market. Simply snap the pipeslice on the tube and turn. Self-clamping and self-adjusting there is no re-adjustment necessary. Quickly cuts tube and is ideal for the hardest to teach places.
|
|
|
|
|
|
|
|
|
|
RT88810 JB Industries Tube Cutter 5/8" - Each
|
|
|
Pipeslice tube cutter for 5/8'' OD. For tubes made from copper this is the easiest tube cutter on the market. Simply snap the pipeslice on the tube and turn. Self-clamping and self-adjusting there is no re-adjustment necessary.
|
|
|
|
|
|
|
|
|
|
RT90614 JB Industries Hand Tube Bender 1/2 5/8 3/4 7/8
|
|
|
Universal multibender for 1/2'', 5/8'', 3/4'', and 7/8''. Ideal for soft copper and aluminum.
|
|
|
|
|
|
|
|
|
|
|
RT99016 JB Industries Replacement clip & Axle for RT70020 - Each
|
|
|
Replacement clip and axle for use in RT70020 and RT70021.
|
|
|
|
|
|
|
|
|
|
T20095 JB Industries Single Multi-Swagging Tool - Each
|
|
|
All in one, multi-swage tool by JB (T20095). For 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', and 5/8'' ODs. Handy tool that works on the most common pipe sizes.
|
|
|
|
|
|
|
|
|
|
T20195 JB Industries 3/16" - 5/8" Flaring Tool - Each
|
|
|
Universal flaring tool for 3/16'', 1/4'', 5/16'', 3/8'', 7/16'' OD (nominals 1/8'', 1/4'', 3/8'', and 1/2'').
|
|
|
|
|
|
|
|
|
|
T20203 JB Industries 45 Degree Flaring Tool - 5/8" - 1 1/8" - Each
|
|
|
T20203 45 Degree Flaring Tool - 5/8" - 1 1/8"
|
|
|
|
|
|
|
|
|
|
T20275 JB Industries 1/8" - 3/4" Flare & Swage Tool - Each
|
|
|
45º degree flaring and swaging tool produces flares, nominal flares, swages, and nominal swages. The rugged forged steel slip-on self centering yoke has a hardened chrome plate swivel type cone to form quality flares with minimal effort. Hardened bars provide positive clamping action with minimum distortion and are fully hinged with king-sized forged steel wing nuts for easy use. The extra second bar extends our flaring tool to 9 OD tube sizes.
|
|
|
|
|
|
|
|
|
|
|
T20500 JB Industries 45 Degree Flaring Tool - 3/16" - 5/8" - Each
|
|
|
45º flaring tool for 3/16'', 1/4'', 5/16'', 3/8'', 1/2'', and 5/8'' OD.
|
|
|
|
|
|
|
|
|
|
T21000 JB Industries Multi-Size 3/16" thru 7/8" Tube Swaging Tool - Each
|
|
|
Multi swage tool for 9 sizes: 3/16'', 1/4'', 5/16'', 3/8'', 7/16'', 1/2'', 5/8'', 3/4'', and 7/8'' OD. Nominal sizes: 1/8'', 1/4'', 3/8'', 1/2'', 5/8'', and 3/4''. This item consists of three pieces that work with most common OD sizes to produce perfect solder cups.
|
|
|
|
|
|
|
|
|
|
T21002 JB Industries 1/8" OD Tube Swaging Tool - Each
|
|
|
Single Swage 1/8" Tube OD. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
T21003 JB Industries 3/16" OD Tube Swaging Tool - Each
|
|
|
Single Swage 3/16" Tube OD. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
T21004 JB Industries 1/4" OD Tube Swaging Tool - Each
|
|
|
Single Swage 1/4" Tube OD. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
T21005 JB Industries 5/16" OD Tube Swaging Tool - Each
|
|
|
Single Swage 5/16" Tube OD. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
T21006 JB Industries 3/8" OD Tube Swaging Tool - Each
|
|
|
Single Swage 3/8" Tube OD. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
T21008 JB Industries 1/2" OD Tube Swaging Tool - Each
|
|
|
Single Swage 1/2" Tube OD. Made in the USA.
|
|
|
|
|
|
|
|
|
|
T21010 JB Industries 5/8" OD Tube Swaging Tool - Each
|
|
|
Single swage 5/8'' (nominal 1/2'') OD tube tool. Made in the USA.
|
|
|
|
|
|
|
|
|
|
T21012 JB Industries 3/4" OD Tube Swaging Tool - Each
|
|
|
Single swage 3/4'' (nominal 5/8'') OD tube tool. Made in the USA.
|
|
|
|
|
|
|
|
|
|
T21014 JB Industries 7/8" OD Tube Swaging Tool - Each
|
|
|
Single swage 7/8'' (nominal 3/4'') OD tube tool. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
T21018 JB Industries 1-1/8" OD Tube Swaging Tool - Each
|
|
|
T21018 1-1/8" OD Tube Swaging Tool
|
|
|
|
|
|
|
|
|
|
T21024 JB Industries 1/4", 3/8", 1/2", 5/8" OD Swaging Tool Set - Each
|
|
|
Packaged set of 1/4'', 3/8'', 1/2'' and 5/8'' swages in a pouch. Made in the USA.
|
|
|
|
|
|
|
|
|
|
T21294 JB Industries 1/8"- 5/8" OD Pinch-Off Tool - Each
|
|
|
This plier-type pinch-off tool temporarily closes off line while making repairs. The quick release trigger and rounded jaws prevent cutting while allowing for reopening and rounding using a standard flare bar. Great for accessing process tubes for charging and resealing, similar to factory seals found on small fractional systems.
|
|
|
|
|
|
|
|
|
|
RT16001 JB Industries Compact Cordless Press Tool
|
|
|
Compact lightweight, battery-powered press tool weights only 3.7lbs. and connects 1/2'', 3/4'', and 1'' copper tubing or 3/8'' - 1-1/4'' PEX tubing in about 6 seconds. A slim profile allows for one hand operation of the tool while the other hand if free to hold and position the fitting. Its straight design is like an extension of your arm that easily reaches into tight spaces. When a press is complete, the jaws automatically release signaling that the tool is ready for the next press.
|
|
|
|
|
|
|
|
|
|
RT16002 JB Industries Compact Cordless Press Tool Kit
|
|
|
Compact lightweight, battery-powered press tool weights only 3.7lbs. and connects 1/2'', 3/4'', and 1'' copper tubing or 3/8'' - 1-1/4'' PEX tubing in about 6 seconds. A slim profile allows for one hand operation of the tool while the other hand if free to hold and position the fitting. Its straight design is like an extension of your arm that easily reaches into tight spaces. When a press is complete, the jaws automatically release signaling that the tool is ready for the next press.
|
|
|
|
|
|
|
|
|
|
RT15031V JB Industries 1/2'' Press Jaw for RT16001, RT16002
|
|
|
1/2'' press jaw for press tool RT16001 and RT16002. Compatible with Viega, Elkhart, and Nibco press fittings.
|
|
|
|
|
|
|
|
|
|
RT15032V JB Industries 3/4'' Press Jaw for RT16001, RT16002
|
|
|
3/4'' press jaw for press tool RT16001 and RT16002. Compatible with Viega, Elkhart, and Nibco press fittings.
|
|
|
|
|
|
|
|
|
|
RT15033V JB Industries 1'' Press Jaw for RT16001, RT16002
|
|
|
1' press jaw for press tool RT16001 and RT16002. Compatible with Viega, Elkhart, and Nibco press fittings.
|
|
|
|
|
|
|
|
|
|
RT16101 JB Industries Cordless Crimping Press Tool
|
|
|
12-ton dieless state-of-the-art crimping press tool for 1/2'', 3/4'', 1-1/4'', 1-1/2'', and 2'' copper or brass press fittings. Features a 24,000 pound crimp force and weights only 15 pounds. Offers maximum force with minimal effort. The interchangeable crimp jaws are flexible and cost effective. Controlled pressing sequence crease uniform, guaranteed joints that conform to the specifications of leading system manufactures. The controlled pressing sequence beings once the touch switch is depressed and held. Total crimping time approximately 7 seconds.
|
|
|
|
|
|
|
|
|
|
RT16102 JB Industries Cordless Crimping Press Tool Kit
|
|
|
12-ton dieless state-of-the-art crimping press tool for 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', and 2'' copper or brass press fittings. Features a 24,000 pound crimp force and weights only 15 pounds. Offers maximum force with minimal effort. The interchangeable crimp jaws are flexible and cost effective. Controlled pressing sequence crease uniform, guaranteed joints that conform to the specifications of leading system manufactures. The controlled pressing sequence beings once the touch switch is depressed and held. Total crimping time approximately 7 seconds.
|
|
|
|
|
|
|
|
|
|
RT16201 JB Industries Crimping Press Tool
|
|
|
12-ton dieless state-of-the-art crimping press tool for 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', and 2'' copper or brass press fittings. Features a 24,000 pound crimp force and weights only 15 pounds. Offers maximum force with minimal effort. The interchangeable crimp jaws are flexible and cost effective. Controlled pressing sequence crease uniform, guaranteed joints that conform to the specifications of leading system manufactures. The controlled pressing sequence begins once the touch switch is depressed and held. Total crimping time approximately 7 seconds.
|
|
|
|
|
|
|
|
|
|
RT16202 JB Industries Corded Crimping Press Tool Kit
|
|
|
12-ton dieless state-of-the-art crimping press tool for 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', and 2'' copper or brass press fittings. Features a 24,000 pound crimp force and weights only 15 pounds. Offers maximum force with minimal effort. The interchangeable crimp jaws are flexible and cost effective. Controlled pressing sequence crease uniform, guaranteed joints that conform to the specifications of leading system manufactures. The controlled pressing sequence begins once the touch switch is depressed and held. Total crimping time approximately 7 seconds.
|
|
|
|
|
|
|
|
|
|
RT21660 JB Industries Pocket Deburring Tool
|
|
|
Deburring tool with high speed steel deburring blade. The blade on this deburring tool is not replaceable. For fast deburring of edges, tubes, and sheets.
|
|
|
|
|
|
|
|
|
|
RT24134 JB Industries Tube Bender Set for 1/4'', 5/16'', 3/8'', 1/2''
|
|
|
Tube bender set for 1/4'', 5/16'', 3/8'', 1/2'' soft copper and aluminum. Exact bending up to 90º degrees. Special adjustments for small pipe diameters makes this ideal for refrigeration, air conditioning, oil supply, automotive, and pneumatic or hydraulic systems. The mechanical ratchet feed provides the ability for rapid and precise bending. The tooth rack with bayonette catch makes the bending formers quick and easy to change. The open bending frame allows for the production of repeated alternate angle bends. Set includes basic tool, bending formers for 1/4'', 5/16'', 3/8'', and 1/2'', and carrying case.
|
|
|
|
|
|
|
|
|
|
|
RT50063 JB Industries Replacement Cutter Blade for RT52030
|
|
|
Replacement cutter blade for JB RT52030.
|
|
|
|
|
|
|
|
|
|
RT52030 JB Industries Pipe Shears 2'' to 2-/1/2''
|
|
|
For 2'' PVC with a maximum 2-1/2'' OD this pipe shear is for precisely cutting PVC, PP, PE, PEX, PB, and PVDF. The finest pipe shears you can find in the market. These rugged precision shears effortlessly cut plastic pipe. The double sided blade along with the ratchet support apply precise force transfer and guided cutter feed. The shears feature a stainless steel blade with a v-edge that gives pin-point accuracy without deforming the pipe. The ideally meshed cutting curve allows for minimum effort.
|
|
|
|
|
|
|
|
|
|
|
RT52176 JB Industries Replacement Battery for Rothenberger Press Tools
|
|
|
18 Volt, lithium battery, 3 amp for all Rothenberger (JB Industries) press tools: This is the 18V 3 amp lithium battery compatible with JB Industries Part #s; RT16001 Compact Press Tool, RT16002 Compact Press Tool, RT16101 Cordless Tool and RT16102 Cordless Tool.
|
|
|
|
|
|
|
|
|
|
|
RT52178 JB Industries Battery Charger for Rothenberger Press Tools
|
|
|
18 Volt lithium battery charger (120V) for al Rothenberger (JB Industries) press tools: RT16101, RT16102, RT16201, RT16102, RT16001, RT16002. For replacement battery see RT52176.
|
|
|
|
|
|
|
|
|
|
RT59000 JB Industries Replacement Cutter Blade
|
|
|
Replacement cutter blade for use in RT59060 and RT59070.
|
|
|
|
|
|
|
|
|
|
RT59001 JB Industries Replacement Cutter Blade for RT59080
|
|
|
Replacement cutter blade for use in RT59080.
|
|
|
|
|
|
|
|
|
|
RT59060 JB Industries 1/2'' OD Pex Cutter
|
|
|
Plasticut pex cutter for 1/2'' OD. For pipes of MDPE, PE, PP, HEP20, and PEX this cutter is ideal for use in confined spaces. The unique, patented design cuts clean and square using no force to operate. The lightweight, simple to use tool is highly efficient with no moving parts.
|
|
|
|
|
|
|
|
|
|
RT59070 JB Industries 3/4'' OD Pex Cutter
|
|
|
Plasticut pex cutter for 3/4'' OD. For pipes of MDPE, PE, PP, HEP20, and PEX this cutter is ideal for use in confined spaces. The unique, patented design cuts clean and square using no force to operate. The lightweight, simple to use tool is highly efficient with no moving parts.
|
|
|
|
|
|
|
|
|
|
RT59080 JB Industries 1'' OD Pex Cutter
|
|
|
Plasticut pex cutter for 1'' OD. For pipes made of MDPE, PE, PP, HEP20, and PEX this cutter is ideal for use in confined spaces. The unique, patented design cuts clean and square using no force to operate. The lightweight, simple to use tool is highly efficient with no moving parts.
|
|
|
|
|
|
|
|
|
|
RT70007B JB Industries Replacement Cutter Wheel
|
|
|
Package of two replacement cutter wheels for use in RT70020 and RT70021.
|
|
|
|
|
|
|
|
|
|
|
RT70017B JB Industries Replacement Cutter Wheel 2Pk
|
|
|
Two pack of replacement cutter wheels for use in RT70401, RT70402, RT70105, RT70105, RT70015, RT70027, RT70029, and RT70030.
|
|
|
|
|
|
|
|
|
|
RT70045 JB Industries 1/8'' to 2'' Pipe Cutter
|
|
|
Steel pipe cutter 1/8'' to 2'' OD. This pipe cutter has wide rollers to secure the guiding of the cutter wheel on the pipe. Easy pressure control offers optimum force transmission onto the tube. Burr-free external cutting provides the possibility of immediate thread cutting.
|
|
|
|
|
|
|
|
|
|
|
RT70051D JB Industries Replacement Cutter Wheel for RT70045
|
|
|
Three pack of replacement cutter wheels for use in RT70045.
|
|
|
|
|
|
|
|
|
|
|
RT70057D JB Industries Replacement Deburring Blade
|
|
|
Two pack of replacement deburring blades for use in RT70142.
|
|
|
|
|
|
|
|
|
|
RT70060 JB Industries 2'' to 4'' Pipe Cutter
|
|
|
Steel pipe cutter 2'' to 4'' OD. This pipe cutter has wide rollers to secure the guiding of the cutter wheel on the pipe. Easy pressure control offers optimum force transmission onto the tube. Burr-free external cutting provides the possibility of immediate thread cutting.
|
|
|
|
|
|
|
|
|
|
|
RT70061D JB Industries Replacement Cutter Wheel for RT70060
|
|
|
Two pack of replacement cutting wheels for use in RT70060.
|
|
|
|
|
|
|
|
|
|
RT70075 JB Industries Universal Deburring Tool
|
|
|
Heavy duty universal internal/external deburring tool for copper and stainless steel 1/8'' to 2'' OD. Has a polished cutting bit made of hardened special steel and is smooth running.
|
|
|
|
|
|
|
|
|
|
RT70285 JB Industries Chain Tube Cutter for 1'' to 2'' OD
|
|
|
Chain tube cutter for 1'' to 2'' OD. For tubes made from copper, aluminum, brass, thin-walled steel, and plastic coated tubes. This tube cutter features a stable chain with 15 mini cutter wheels. A two step adjustment. Ideal for working in confined spaces such as parallel-running pipes.
|
|
|
|
|
|
|
|
|
|
|
RT70286 JB Industries Replacement Tube Cutter Chain for RT70285
|
|
|
Replacement tube cutter chain for RT70285.
|
|
|
|
|
|
|
|
|
|
RT70531 JB Industries Ro-Lock 7'' Professional Pliers
|
|
|
Ro-lock 7'' professional-grade pliers. Features a jaw locking system to provide a secure grip on round, square, or hex shaped items with the push of a button. The 14 groove opening positions carry an opening capacity of 2-1/3''. Secure, anti-slip grip and durable, double-hardened, chrome vanadium steel with black oxide finish resist corrosion.
|
|
|
|
|
|
|
|
|
|
RT70532 JB Industries Ro-Lock 9'' Professional Pliers
|
|
|
Ro-lock 9'' professional-grade pliers. Features a jaw locking system to provide a secure grip on round, square, or hex shaped items with the push of a button. The 14 groove opening positions carry an opening capacity of 2-1/3''. Secure, anti-slip grip and durable, double-hardened, chrome vanadium steel with black oxide finish resist corrosion.
|
|
|
|
|
|
|
|
|
|
RT70533 JB Industries Ro-Lock 12'' Professional Pliers
|
|
|
Ro-lock 12'' professional-grade pliers. Features a jaw locking system to provide a secure grip on round, square, or hex shaped items with the push of a button. The 14 groove opening positions carry an opening capacity of 2-1/3''. Secure, anti-slip grip and durable, double-hardened, chrome vanadium steel with black oxide finish resist corrosion.
|
|
|
|
|
|
|
|
|
|
RT70905X JB Industries NPT Hand Threader Set
|
|
|
Thread cutter set to approved standards 1/2'' to 2'' NPT on steel pipe. This ratchet threader has quick change die heads with positive octagonal universal drive for secure hold. The longer pipe guide allows for perfect centering. The precision tempered steel dies have optimized cutting geometry making it easy to start the cut and provide excellent chip discharge. The secure hold with locking retainer make insertion and removal of die heads simple. Slim, compact shape has angle requirements of 22.5º degrees so you can get those hard to reach places. Set includes ratchet handle, die heads for 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', and plastic carrying case.
|
|
|
|
|
|
|
|
|
|
RT25914 JB Industries Standard Tube Bender 3/4" OD
|
|
|
RT25914 JB Industries Standard Tube Bender 3/4" OD. Tube bender pro for 3/4" OD radius for semi-hard and hard copper pipes and features a case iron body for longer life along with self adjusting shoe. JB is the exclusive distributor of the high quality German engineered tubing tools from Rothenberger. Rothenberger uses only the highest quality materials set against the strictest German standards to render the best and most reliable tools in the marketplace. Backed by a 24 month over-the-counter warranty, JB stands behind these products as if they were putting the JB name on them. Once you get your hands on these tools, you will see why Rothenberger tools are Just Better.
|
|
|
|
|
|
|
|
|
|
11511 JB Industries LACO BLOC-IT Heat Absorbing Paste
|
|
|
11511 LACO BLOC-IT Heat Absorbing Paste - LACO Bloc-It Heat Absorbing Paste. Heavy paste effectively absorbs surface heat and protects adjoining surfaces that may be damaged by excessive heat. Typically used to protect rubber, plastic, distortion, painted, and finished surfaces during soldering, brazing, or welding.
|
|
|
|
|
|
|
|
|
|
BRZ1000 JB Industries Braze-Rite Adapter
|
|
|
BRZ1000 JB Industries Braze-Rite Adapter - Quickly connects to manifold gauge hose, and slips easily and securely into pipe. Allows for bleed of nitrogen through pipe being brazed, keeping the pipes clean and oxide-free. Stepped to fit most common ACR pipe sizes, making it fast to go from one tube to the next. Saves time and money and helps maintain equipment manufacturer's system performance and installation guidelines. No more duct taping your hoses to the pipe!
|
|
|
|
|
|
|
|
|
|
PS-100 JB Industries 100' Steel Strap - Each
|
|
|
100' (30.5 M) steel strap. Zinc plated and alternate between nail and bolt holes. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
RT12428 JB Industries Crimper, PEX 1/2" & 3/4"
|
|
|
RT12428 JB Industries Crimper, PEX 1/2" & 3/4" - Constructed of hardened steel with ultra-lite fiberglass reinforced handle, the pex crimper is ideal for making copper crimp ring connections in potable water and radiant heating applications. Each tool has a go/no-go gauge. The crimp cavity does not skive the copper ring or cause it to fishtail during crimping process.
|
|
|
|
|
|
|
|
|
|
|
RT15222X JB Industries Press Jaw 1/2" Copper
|
|
|
RT15222X JB Industries Press Jaw 1/2" Copper - 1/2" press jaw for press tool RT16101 and RT16201 - Jaws are made from copper and have long term corrosion protection. Each jaw has a batch number and is individually tested to meet high quality standards for material and press profile. Universally accepted for all press tools and compatible with all press fitting manufacturers.
|
|
|
|
|
|
|
|
|
|
|
RT15223X JB Industries Press Jaw 3/4" Copper
|
|
|
RT15223X JB Industries Press Jaw 3/4" Copper - 3/4" press jaw for press tool RT16101 and RT16201 - Jaws are made from copper and have long term corrosion protection. Each jaw has a batch number and is individually tested to meet high quality standards for material and press profile. Universally accepted for all press tools and compatible with all press fitting manufacturers.
|
|
|
|
|
|
|
|
|
|
|
RT15224X JB Industries Press Jaw 1" Copper
|
|
|
RT15224X JB Industries Press Jaw 1" Copper - 1" press jaw for press tool RT16101 and RT16201 - Jaws are made from copper and have long term corrosion protection. Each jaw has a batch number and is individually tested to meet high quality standards for material and press profile. Universally accepted for all press tools and compatible with all press fitting manufacturers.
|
|
|
|
|
|
|
|
|
|
|
RT15225X JB Industries Press Jaw 1-1/4" Copper
|
|
|
RT15225X JB Industries Press Jaw 1-1/4" Copper - 1-1/4" press jaw for press tool RT16101 and RT16201 - Jaws are made from copper and have long term corrosion protection. Each jaw has a batch number and is individually tested to meet high quality standards for material and press profile. Universally accepted for all press tools and compatible with all press fitting manufacturers.
|
|
|
|
|
|
|
|
|
|
|
RT15226X JB Industries Press Jaw 1-1/2" Copper
|
|
|
RT15226X JB Industries Press Jaw 1-1/2" Copper - 1-1/2" press jaw for press tool RT16101 and RT16201 - Jaws are made from copper and have long term corrosion protection. Each jaw has a batch number and is individually tested to meet high quality standards for material and press profile. Universally accepted for all press tools and compatible with all press fitting manufacturers.
|
|
|
|
|
|
|
|
|
|
|
RT15227X JB Industries Press Jaw 2" Copper
|
|
|
RT15227X JB Industries Press Jaw 2" Copper - 2" press jaw for press tool RT16101 and RT16201 - Jaws are made from copper and have long term corrosion protection. Each jaw has a batch number and is individually tested to meet high quality standards for material and press profile. Universally accepted for all press tools and compatible with all press fitting manufacturers.
|
|
|
|
|
|
|
|
|
|
RT25913 JB Industries Standard Tube Bender Pro 1/2" OD
|
|
|
The RT25913 Pro tube bender for 1/2'' OD semi-hard / Hard copper. Radius 5/8" inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation. The light construction results in fatigue-free hand operation. The clamp mechanism better holds the tube and enables the bending of even the shortest of tube pieces. The Tube Bender Pro is for 1/2" semi-hard and hard copper pipes and features a case iron body for longer life along with self adjusting shoe.
|
|
|
|
|
|
|
|
|
|
RT52000D JB Industries Counter Display (10 RT52000)
|
|
|
RT52000D JB Industries Counter Display (10 RT52000) - 10 PACK PIPE SHEAR DISPLAY - This pipe shear precisely cuts PVC, PP, PE, PB, PEX, CPVC, and PVDF. These shears are the finest you can find in the market. The quick release lever provides automatic opening of the blade at the push of a button. Ideally meshed cutting curve provides for minimum effort during the cutting operation.
|
|
|
|
|
|
|
|
|
|
RT70015D JB Industries Counter Display (20 RT70015)
|
|
|
RT70015D JB Industries Counter Display (20 RT70015) - 20 PACK SALES DISPLAY - Copper mini max tube cutter for 1/8'' to 1-1/8'' OD by JB (RT70015). Used for cutting copper tubes, these cutters have a large knurled knob and a handy design that produce fatigue-free pressure control. There are two recessed guide rollers that assist with cutting close to flares. For replacement cutting wheels, use RT70017B.
|
|
|
|
|
|
|
|
|
|
RT70027D JB Industries Counter Display (10 RT70027)
|
|
|
RT70027D JB Industries Counter Display (10 RT70027) - 10 PACK COUNTER DISPLAY - Professional copper and aluminum tube cutter for 1/4'' to 1-3/8'' OD. For tubes made from copper, aluminum, or brass, this tube cutter features a retractable deburrer blade and spare cutter wheel in the handle.
|
|
|
|
|
|
|
|
|
|
RT70029D JB Industries Counter Display (10 RT70029)
|
|
|
RT70029D JB Industries Counter Display (10 RT70029) - 10 PACK COUNTER DISPLAY - Professional copper and aluminum tube cutter for 1/4'' to 1-5/8'' OD. For tubes made from copper, aluminum, or brass, this tube cutter features a retractable deburrer blade and spare cutter wheel in the handle. For replacement deburring blade use RT21652B. For stainless steel cutting wheel use RT70056D. For replacement cutting wheel use RT70017B.
|
|
|
|
|
|
|
|
|
|
RT70030D JB Industries Counter Display (4 RT70030)
|
|
|
RT70030D JB Industries Counter Display (4 RT70030) - 4 PACK COUNTER DISPLAY - Ratchet tube cutter for 1/8'' to 2-5/8'' OD. For tubes made from copper, aluminum, brass, thin-walled steel, and plastic coated tubes this tube cutter features a retractable internal deburrer blade and spare cutter wheel in the handle. The ratchet telescopic guide with automatic spring-driven withdraw allows for quick adjustment and fast opening. For replacement deburring blade use RT21652B. For replacement cutting wheel use RT70017B.
|
|
|
|
|
|
|
|
|
|
RT70105D JB Industries Counter Display (20 RT70105)
|
|
|
RT70105D JB Industries Counter Display (20 RT70105) - 20 PACK COUNTER DISPLAY - Copper mini tube cutter for 1/8'' to 7/8'' OD. Used for cutting copper tubes, these cutters have a large knurled know and a handy design that produces fatigue-free pressure control. There are two recessed guide rollers that assist with cutting close to flares. For replacement cutting wheels use RT70017B.
|
|
|
|
|
|
|
|
|
|
RT70152 JB Industries 12" Pipe Wrench 2" OD
|
|
|
RT70152 JB Industries 12" Pipe Wrench 2" OD - Heavy duty 12'' pipe wrench for 2'' maximum OD monoblock cast body with high strength, double t profile, forged jaw and hook, fine-polished teeth set against turning direction, induction hardened, tempered, and anti-slip adjustment screw. Complies with US standard GGG-W-651 type 1 class A. Spring-supported hook for one-handed ratchet-like use. Quick preset of tube diameter using scale on hook.
|
|
|
|
|
|
|
|
|
|
RT70153 JB Industries 14" Pipe Wrench 2" OD
|
|
|
RT70153 JB Industries 14" Pipe Wrench 2" OD - Heavy duty 14'' pipe wrench for 2'' maximum OD monoblock cast body with high strength, double t profile, forged jaw and hook, fine-polished teeth set against turning direction, induction hardened, tempered, and anti-slip adjustment screw. Complies with US standard GGG-W-651 type 1 class A. Spring-supported hook for one-handed ratchet-like use. Quick preset of tube diameter using scale on hook.
|
|
|
|
|
|
|
|
|
|
RT70521 JB Industries Water Pump Pliers 7" (1" Max OD)
|
|
|
RT70521 JB Industries Water Pump Pliers 7" (1" Max OD) - Complies with DIN 5321 D, these pliers are made with heavy-duty box joint, chrome vanadium steel, drop forged, tempered, and polished head and joint. The longer, thinner pliers with measurements for corners are ideal for hard to reach places. The self-clamping jaws will not slip, even on smooth surfaces.
|
|
|
|
|
|
|
|
|
|
RT70522 JB Industries Water Pump Pliers 10" (1-1/4" Max OD)
|
|
|
RT70522 JB Industries Water Pump Pliers 10" (1-1/4" Max OD) - Complies with DIN 5321 D, these pliers are made with heavy-duty box joint, chrome vanadium steel, drop forged, tempered, and polished head and joint. The longer, thinner pliers with measurements for corners are ideal for hard to reach places. The self-clamping jaws will not slip, even on smooth surfaces.
|
|
|
|
|
|
|
|
|
|
RT70522D JB Industries Counter Display (12 RT70522)
|
|
|
RT70522D JB Industries Counter Display (12 RT70522) - 12 PACK COUNTER DISPLAY - Complies with DIN 5321 D, these pliers are made with heavy-duty box joint, chrome vanadium steel, drop forged, tempered, and polished head and joint. The longer, thinner pliers with measurements for corners are ideal for hard to reach places. The self-clamping jaws will not slip, even on smooth surfaces.
|
|
|
|
|
|
|
|
|
|
RT70523 JB Industries Water Pump Pliers 12" (1-1/2" Max OD)
|
|
|
RT70523 JB Industries Water Pump Pliers 12" (1-1/2" Max OD) - Complies with DIN 5321 D, these pliers are made with heavy-duty box joint, chrome vanadium steel, drop forged, tempered, and polished head and joint. The longer, thinner pliers with measurements for corners are ideal for hard to reach places. The self-clamping jaws will not slip, even on smooth surfaces.
|
|
|
|
|
|
|
|
|
|
T30600 JB Industries Ratcheting Flaring Tool Eccentric Cone Type (3/16" to 3/4")
|
|
|
T30600 JB Industries Ratcheting Flaring Tool Eccentric Cone Type (3/16" to 3/4") - Eccentric Cone Type (for 3/16" to 3/4") - Eccentric cone flaring for tubes with an OD of: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4". With an internal clutch that will prevent you from over-torquing the flare. This is the ideal tool for servicing R410A mini splits.
|
|
|
|
|
|
|
|
|
|
MSKIT1 JB Industries Mini Split Back Pack Kit 1/4" SAE
|
|
|
MSKIT1 JB Industries Mini Split Kit 1/4". Includes BACKPACK1 - JB Heavy Duty Tool Back Pack, 22500 - Patriot™ manifold with R-410A gauges, CCLS-60 - 1/4" KOBRA® UL approved Secure Seal hose set, T30605 - Metric (2-8mm) & Imperial (5/64 - 1/4") hex key set, T30600 - Ratcheting eccentric cone flare tool, TRQ1080 - Torque wrench set with 6 spanner heads (10 - 80 N-M), A32525N - 1/4" Female x 1/4" SAE Valve core remover with side port, SHLD-P4 - SHIELD™ locking cap R-410A (4 pack), A31565 - 5/16" Female x 1/4" SAE brass adapters (2 included), NFT5-4 - 1/4" Brass caps (5 included).
|
|
|
|
|
|
|
|
|
|
|
MSKIT2 JB Industries Mini Split Back Pack Kit 5/16" Fittings
|
|
|
MSKIT2 JB Industries Mini Split Back Pack Kit 5/16" Fittings. Includes BACKPACK1 - JB Heavy Duty Tool Back Pack, 22505 - Patriot™ manifold with R-410A gauges, CCLS5-60 - 1/4" KOBRA® UL approved Secure Seal hose set, T30605 - Metric (2-8mm) & Imperial (5/64 - 1/4") hex key set, T30600 - Ratcheting eccentric cone flare tool, TRQ1080 - Torque wrench set with 6 spanner heads (10 - 80 N-M), A32535N - 5/16" Female x 5/16" SAE Valve core remover with side port, SHLD-E4 - SHIELD™ locking cap R-410A (4 pack), A31665 - 5/16" Male x 1/4" Female SAE brass adapters (2 included), NFT5-5 - 5/16" Brass caps (5 included).
|
|
|
|
|
|
|
|
|
|
|
RT12425 JB Industries Crimper, PEX 1/2"
|
|
|
RT12425 JB Industries Crimper, PEX 1/2"
|
|
|
|
|
|
|
|
|
|
|
RT12426 JB Industries Crimper, PEX 3/4"
|
|
|
RT12426 JB Industries Crimper, PEX 3/4"
|
|
|
|
|
|
|
|
|
|
|
RT12427 JB Industries Crimper, PEX 1"
|
|
|
RT12427 JB Industries Crimper, PEX 1"
|
|
|
|
|
|
|
|
|
|
|
RT12429 JB Industries Clamp Pincer Ratchet
|
|
|
RT12429 JB Industries Clamp Pincer Ratchet
|
|
|
|
|
|
|
|
|
|
|
RT12430 JB Industries Ring Removal Tool
|
|
|
RT12430 JB Industries Ring Removal Tool
|
|
|
|
|
|
|
|
|
|
|
RT12500 JB Industries Supertronic 12500 in Heavy Duty Plastic Case
|
|
|
RT12500 JB Industries Supertronic 12500 in Heavy Duty Plastic Case
|
|
|
|
|
|
|
|
|
|
|
RT22350 JB Industries Flaring and Swaging Kit
|
|
|
RT22350 JB Industries Flaring and Swaging Kit
|
|
|
|
|
|
|
|
|
|
BS-14 JB Industries Bending Spring For 7/8" OD Tubing
|
|
|
JB Industries Bending Spring For 7/8" OD Tubing
Ideal for irregular bends, these spring type benders are available in single springs or packaged sets.
|
|
|
|
|
|
|
|
|
|
|
JB-BACKPACK1 JB Industries JB Backpack
|
|
|
JB-BACKPACK1 JB Industries JB Backpack
|
|
|
|
|
|
|
|
|
|
|
JB-Toolbag1 JB Industries JB Tool Bag
|
|
|
JB-Toolbag1 JB Industries JB Tool Bag
|
|
|
|
|
|
|
|
|
|
|
MSKIT3 JB Industries Basic Mini Split Kit
|
|
|
MSKIT3 JB Industries Basic Mini Split Kit
|
|
|
|
|
|
|
|
|
|
2189 KD Tools Tubing Bender
|
|
|
Bend 3/16, 1/4, 5/16 and 3/8_ copper and steel tubing.
|
|
|
|
|
|
|
|
|
|
11575 JB Industries La-co Heat-Seal Stik - 3/8 Oz. (Each)
|
|
|
Ideal for use on high and low side of refrigeration systems, the heat-seal stik can be used on aluminum, copper, other metals, glass, and ceramics. Sticks, melts, seals, and cures in one 90 second operation. One part epoxy, there is no mixing or measuring needed. Sealing temperature is up to 350° F (177° C) and pressures to 450 psi (31 bar).
|
|
|
|
|
|
|
|
|
|
96822 JB Industries Red Valve Action Paint Marker - Each
|
|
|
The New Markal® Valve Action® Paint Marker marks with real paint leaving permanent, durable, highly visible marks. It can be used for parts identification, quality control marking, layout and cut lines and color coding on almost any non-porous surface. With a new, faster drying, low chlorides, Xylene-free paint, the tough new Dura-Nib tip and the convenient ClipGrip cap.
|
|
|
|
|
|
|
|
|
|
96823 JB Industries Black Valve Action Paint Marker - Each
|
|
|
The New Markal® Valve Action® Paint Marker marks with real paint leaving permanent, durable, highly visible marks. It can be used for parts identification, quality control marking, layout and cut lines and color coding on almost any non-porous surface. With a new, faster drying, low chlorides, Xylene-free paint, the tough new Dura-Nib tip and the convenient ClipGrip cap.
|
|
|
|
|
|
|
|
|
|
44000 Lisle Tubing Bender
|
|
|
Easy to use with one end connected - or can be mounted in vise.
|
|
|
|
|
|
|
|
|
|
71475 Mastercool Universal Hydraulic Flaring Tool Set
|
|
|
71475 Mastercool Universal Hydraulic Flaring Tool Set. This kit fabricates Push Connect 1/4, 5/16 and 3/8”; GM Fuel Line Flare, Brake Lines and Transmission 5/16 and 3/8”; Flare/Double Flare 3/16, 1/4, 5/16, 3/8 and 1/2”; Metric Bubble Flare 4.75, 6, 8, and 10mm. Comes in a custom molded box.
|
|
|
|
|
|
|
|
|
|
71500 Mastercool Hydra-Krimp Hose Crimping Tool
|
|
|
Mastercool’s patented 71500 “Hydra – Krimp” makes crimping barbed and beaded fittings as easy as 1 – 2 – 3! The lightweight hand-held hydraulic press is very portable and ideal for shop and field applications. The kit comes with a complete set of dies covering hose sizes #6, #8, #10, #12 and reduced barrier #6, #8, #10 and #12. The dies snap quickly into the press fixture requiring no pins or screws. (patent# 6,324,884) Kit comes in a custom molded case.
|
|
|
|
|
|
|
|
|
|
71550 Mastercool Manual Style Hose Crimper
|
|
|
Manual Style Hose Crimper
|
|
|
|
|
|
|
|
|
|
70027 Mastercool Tube Cutter For 1/8" To 5/8" O.D. Tubing
|
|
|
Mastercool 70027 Mini Tube Cutter for 1/8 to 5/8" O.D. Tubing (1/8 - 1/2" Nominal).
|
|
|
|
|
|
|
|
|
|
70033 Mastercool Heavy Duty Tube Cutter 1/8" To 1 1/8" O.D.
|
|
|
The Mastercool 70033 Heavy Duty Tube Cutter for 1/8 to 1 1/8" O.D. Tubing (1/4 to 1" Nominal).
|
|
|
|
|
|
|
|
|
|
70092 Mastercool Cutting Flaring & Double Flaring Kit In Plastic Case
|
|
|
The Mastercool 70092 45º Flaring, Double Flaring & Cutting Tool Set includes heavy duty tube cutter 70033, standard 45º flaring tool 70051 and five double flaring adapters 70192.
|
|
|
|
|
|
|
|
|
|
|
71097-13 Mastercool 3/16" Die Set
|
|
|
3/16" Die Set
|
|
|
|
|
|
|
|
|
|
|
71475-4M Mastercool 4.75mm Adapter
|
|
|
4.75mm Adapter
|
|
|
|
|
|
|
|
|
|
70029 Mastercool Tube Cutter For 3/8" To 1 1/8" O.D. Tubing
|
|
|
Tube Cutter For 3/8? To 1 1/8? O.D. Tubing
|
|
|
|
|
|
|
|
|
|
70030 Mastercool 1/4" To 7/8" Ratchet Cutter
|
|
|
Use the Mastercool 70030 Ratchet Style Tube Cutter when you don't have swing room, ratchet action allows cutting all the way around the tubing easy (1/4 to 7/8" O.D. Tubing).
|
|
|
|
|
|
|
|
|
|
70031 Mastercool 5/16" To 1 1/8" Ratchet Cutter
|
|
|
Use the Mastercool 70031 Ratchet Style Tube Cutter when you don't have swing room, ratchet action allows cutting all the way around the tubing easy (5/16 to 1 1/8" O.D. Tubing).
|
|
|
|
|
|
|
|
|
|
|
70034 Mastercool Cutter Wheel For 70029 70033 70035 And 70037 (10 Per Bag)
|
|
|
Cutter Wheel For 70029 70033 70035 And 70037 (10 Per Bag)
|
|
|
|
|
|
|
|
|
|
70035 Mastercool Heavy Duty Tube Cutter 1/4" To 1-5/8" O.D.
|
|
|
The Mastercool 70035 Heavy Duty Tube Cutter for 1/4 to 1 5/8" (1/4 to 1 1/2" Nominal).
|
|
|
|
|
|
|
|
|
|
70037 Mastercool Tube Cutter 1/4 To 2 5/8" Chrome (6-66mm)
|
|
|
The Mastercool 70037 Sliding Ratchet Tube Cutter for 1/4 to 2 5/8" (6mm to 66 mm) O.D. Tubing (1/4 to 2 3/4" Nominal), Triple Chrome Plated.
|
|
|
|
|
|
|
|
|
|
70038 Mastercool Tube Cutter 1 1/4" To 3 1/2" (32-89 mm)
|
|
|
The Mastercool 70038 Sliding Ratchet Tube Cutter for 1/4 to 3 1/2" O.D. Tubing (1/4 to 1 1/2" Nominal).
|
|
|
|
|
|
|
|
|
|
70040 Mastercool All-In-One Swaging Punch Chrome Finish
|
|
|
The Mastercool 70040 All-In-One Swaging Punch. Nickel-chrome finish. Swages 1/4", 5/16", 3/8", 1/2" and 5/8". Enlarge one end of copper tubing to accept piece of original size tubing, then solder together like a fitting. Tools are heat treated for durability.
|
|
|
|
|
|
|
|
|
|
|
70041 Mastercool Single Size Swaging Punch Swages 1/4" Tubing
|
|
|
Mastercool 70041 Single Size Swaging Punch. Swages 1/4" Tubing (Length 1/8")
|
|
|
|
|
|
|
|
|
|
|
70042 Mastercool Single Size Swaging Punch Swages 5/16" Tubing
|
|
|
Mastercool 70042 Single Size Swaging Punch. Swages 5/16" Tubing.
|
|
|
|
|
|
|
|
|
|
|
70043 Mastercool Single Size Swaging Punch Swages 3/8" Tubing
|
|
|
Mastercool 70043 Single Size Swaging Punch. Swages 3/8" Tubing (Length 1/4").
|
|
|
|
|
|
|
|
|
|
|
70044 Mastercool Single Size Swaging Punch Swages 1/2" Tubing
|
|
|
Mastercool 70044 Single Size Swaging Punch. Swages 1/2" Tubing (Length 3/8").
|
|
|
|
|
|
|
|
|
|
|
70045 Mastercool Single Size Swaging Punch Swages 5/8" Tubing
|
|
|
Mastercool 70045 Single Size Swaging Punch. Swages 5/8" Tubing (Length 1/2").
|
|
|
|
|
|
|
|
|
|
|
70046 Mastercool Single Size Swaging Punch Swages 3/4" Tubing
|
|
|
Mastercool 70045 Single Size Swaging Punch. Swages 3/4" Tubing (Length 5/8").
|
|
|
|
|
|
|
|
|
|
|
70047 Mastercool Single Size Swaging Punch Swages 7/8" Tubing
|
|
|
Mastercool 70045 Single Size Swaging Punch. Swages 7/8" Tubing (Length 3/4").
|
|
|
|
|
|
|
|
|
|
70048 Mastercool Set Of 5 Swaging Punches 1/4, 5/16, 3/8, 1/2 and 5/8"
|
|
|
Mastercool 70048 Set Of 5 Swaging Punches for 1/4", 5/16", 3/8", 1/2" and 5/8" O. D. tubing.
|
|
|
|
|
|
|
|
|
|
70049 Mastercool Flaring Bar and Set Of 5 Swaging Punches 1/4 5/16 3/8 1/2 And 5/8"
|
|
|
Flaring Bar and Set Of 5 Swaging Punches 1/4, 5/16, 3/8, 1/2 And 5/8" O.D. tubing. Comes in box.
|
|
|
|
|
|
|
|
|
|
70051 Mastercool Standard Flaring Tool
|
|
|
The Mastercool 70051 Standard 45º Flaring Tool has a durable forged steel slip-on yoke. Flaring bar is hardened, highly polished and nickel chrome plated. Auto centering yoke features bearing driven hardened cone for easy flaring. For 7 sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" O.D. tubing.
|
|
|
|
|
|
|
|
|
|
|
70051-M Mastercool Metric Flaring Tool
|
|
|
Metric Flaring Tool
|
|
|
|
|
|
|
|
|
|
70052 Mastercool Sliding Die-Block Flaring Tool
|
|
|
The Mastercool 70052 Sliding Die-Block 45º Flaring Tool is uniquely designed flaring cone flares and burnishes in one easy operation. Slide-on yoke is simple to use. Hardened multi-size flaring bar speeds flaring time. Flares and burnishes 6 sizes: 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8" O.D. tubing.
|
|
|
|
|
|
|
|
|
|
70053 Mastercool Flaring And Swaging Adapter Tool Kit
|
|
|
The Mastercool 70053 45º Flaring And Swaging Tool Set has a durable forged steel slip-on yoke. Bars are chrome plated, hardened steel. Swages in close quarters where punch style cannot be used. Includes custom plastic carrying case. 45º Flaring & Swaging Tool Set includes: Two Flaring Bars cover 9 sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4" O.D. tubing Five Swaging Adapters cover 7 sizes: 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4" O.D. tubing.
|
|
|
|
|
|
|
|
|
|
|
70054 Mastercool Wide Range 45Deg Flaring Tool Set
|
|
|
The Mastercool 70054 Wide Range Flaring Tool Set has a rugged forged steel slip-on yoke. Flaring bars are hardened, highly polished and nickel chrome plated. Flares 9 sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4" O.D. tubing.
|
|
|
|
|
|
|
|
|
|
70056 Mastercool Large Capacity 45º Flaring Tool
|
|
|
The Mastercool 70056 Large Capacity 45º Flaring Tool flares large tube sizes. Hard chrome plated, swivel flaring cone makes flaring quick and easy. Flaring bar is hardened and nickel chrome plated. Flares 4 sizes: 5/8", 3/4", 7/8" and 1" O.D. tubing.
|
|
|
|
|
|
|
|
|
|
70057 Mastercool 45º Eccentric Cone Flaring Tool W/6 Sizes And Plastic Box
|
|
|
The Mastercool 70057 45º Eccentric Cone Flaring Tool flares 6 Sizes: 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4" O.D. Tubing.
|
|
|
|
|
|
|
|
|
|
|
70057-M Mastercool Eccentric Cone Flaring Tool W/7 Sizes And Plastic Box
|
|
|
Eccentric Cone Flaring Tool W/7 Sizes And Plastic Box
|
|
|
|
|
|
|
|
|
|
70058 Mastercool Eccentric Flaring Tool Complete W/Cutter Deburring Tool & Plastic Box
|
|
|
Eccentric Flaring Tool Complete W/Cutter Deburring Tool & Plastic Box
|
|
|
|
|
|
|
|
|
|
|
70058-M Mastercool Eccentric Metric Flaring Tool Complete W/Cutter Deburring Tool & Plastic Box
|
|
|
Eccentric Metric Flaring Tool Complete W/Cutter Deburring Tool & Plastic Box
|
|
|
|
|
|
|
|
|
|
|
70059 Mastercool Eccentric Flaring Tool - Flare 6 Sizes 1/4 3/8 1/2 5/8 3/4 7/8
|
|
|
The Mastercool 70059 45º Eccentric Flaring Tool flares 6 Sizes 1/4, 3/8, 1/2, 5/8, 3/4 and 7/8" O. D. tubing.
|
|
|
|
|
|
|
|
|
|
|
70060 Mastercool 45º Eccentric Flaring Tool Kit
|
|
|
The Mastercool 45º Eccentric Flaring Tool Kit includes 70059 Eccentric Flaring Tool, 71685 Inner-Outer Reamer, 70033 Heavy Duty Tube Cutter for (1/8” – 1 1/8”) 4 to 28mm.
|
|
|
|
|
|
|
