11487 Titan Mini Tubing Bender: Bend soft thin walled tubing like copper, brass and there are others, bends tubing up to 5/16" or 8mm outside diameter.

11488 Titan Tubing Bending Pliers: Bend soft thin walled tubing like copper, brass and there are others, bends tubing sized 3/16", 1/4", 5/16" or 3/8" outside diameter.

11489 Titan 180 Degree Tubing Bender: Bend soft thin walled tubing like copper, brass and there are others, bends tubing sized up to 3/8" outside diameter. With a calibration gauge for smooth radius bends up to 180 degrees. Bends copper, brass and other thin walled tubing. Designed for 1/8", 3/16", 1/4" and 3/8" O. D. tubing

HT666 3-In-1 Tubing Bender 180.  180 Degree & Calibrated Mark Angle for 0-180 Degree. Fully Aluminum Alloy Body with Shiny Black Finish. Bending for Copper, Aluminum, and other Soft Tubing. For tubing OD's 1/4", 5/16", 3/8". Open Side Slips on Tubing at any Point - Makes Bending Fast and Accurate.

3 in 1 Lever Tube Bender 180 Degree Size: 1/4" 5/16" & 3/8": This tube bender will allow you to bend 1/4", 5/16" and 3/8" tubing up to 180 degree angles with index marks for the most accurate bends.

Bend 3/16", 1/4", 5/16", and 3/8" diameter tubing without kinking. Place tubing in groove and turn the handle to bend. Heavy-duty construction provides years of service.

51502 Titan 4-in-1 Quick Change Tube Bender Pliers. Bends 3/16, 1/4, 5/16, and 3/8 Inch outside diameter of brass, copper, steel or aluminum tubing. Satin Chrome Finish.

51503 Titan Mini Tubing Bender 1/8" 3/16" 1/4". Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees. Use with Brass, Copper, Steel, or Aluminum. Compact for limited accessibility applications.

The Mastercool 70061 Lever Type Tube Bender for 1/4" O.D. (Nominal Size 1/8"), with a radius to center of tube of 9/16".

The Mastercool 70062 Lever Type Tube Bender for 5/16" O.D., with a radius to center of tube of 11/16".

The Mastercool 70063 Lever Type Tube Bender for 3/8" O.D. (Nominal Size 1/4"), with a radius to center of tube of 15/16".

The Mastercool 70064 Lever Type Tube Bender for 1/2" O.D. (Nominal Size 3/8"), with a radius to center of tube of 1 1/2".

The Mastercool 70065 Lever Type Tube Bender for 5/8" O.D. (Nominal Size 1/2"), with a radius to center of tube of 2 1/4".

The Mastercool 70066 Lever Type Tube Bender for 3/4" O.D. (Nominal Size 5/8"), with a radius to center of tube of 3".

The Mastercool 70067 Lever Type Tube Bender for 7/8" O.D. (Nominal Size 3/4"), with a radius to center of tube of 3".

4-In-1 Lever Style  Tube Bender is an all metal multi-purpose 180º Tube Bender for 3/16, 1/4, 5/16 and 3/8” O.D. Tubing.

The Mastercool 70070 "Ratchet Style" Tube Bender Kit is a hand-operated ratchet design that bends 3/8, 1/2, 5/8, 3/4 and 7/8” O.D. soft tubing easily. Includes heavy duty tube cutter for (1/8 – 1 1/8” O.D. tubing), inner-outer reamer for (3/16 – 1 1/2” O.D. tubing) and it comes in custom molded case.

Spring Type Bender For Soft Copper Or Aluminum 1/4" O.D. Tubing

Spring Type Bender For Soft Copper Or Aluminum 5/16" O.D. Tubing

Spring Type Bender For Soft Copper Or Aluminum 3/8" O.D. Tubing

Spring Type Bender For Soft Copper Or Aluminum 1/2"O.D. Tubing

Spring Type Bender For Soft Copper Or Aluminum 5/8" O.D. Tubing

The Mastercool 70076 Spring Style Tube Bender Set consists of 5 benders for 1/4 5/16 3/8 1/2 And 5/8" O.D. tubing.

Spring Type Bender For Soft Copper Or Aluminum 3/4" O.D. Tubing

BS-10 JB Industries Bending Spring For 5/8" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

BS-12 Bending Spring For 3/4" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

JB Industries Bending Spring For 7/8" OD Tubing
Ideal for irregular bends, these spring type benders are available in single springs or packaged sets.

BS-4 Bending Spring For 1/4" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

BS-5 Bending Spring For 5/16" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

BS-55 1/4" 5/16" 3/8" 1/2" 5/8" Bending Springs Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

BS-6 JB Industries Bending Spring For 3/8" OD Tubing  Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

BS-7 Bending Spring For 7/16" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

BS-77 JB Industries Tube Bending Springs In Pouch All 7 Sizes Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

BS-8 JB Industries Bending Spring For 1/2" OD Tubing Ideal for irregular bends, these spring type benders are available in single springs and packaged sets. Used for soft copper, aluminum, brass, and steel.

BTB300 CPS Blackmax Ratcheting Tube Bender With Reverse Bend 1/4" - 7/8". Introducing BlackMAX tubing tools- a new line of unique featured, premium grade, and hard-working tubing tools from CPS. Used for cutting, deburing, flaring, expanding and bending soft copper and aluminum tubing. BlackMAX tubing tools also include a line of 2 and 3 jaw gear pullers. Premium form, function and ergonomics at affordable prices. Try them today and see the difference! Premium Ratcheting.

BTBX12 Aluminum Mandrel (1/2") for BTB300

BTBX14 Aluminum Mandrel (1/4") for BTB300

BTBX34 Aluminum Mandrel (3/4") for BTB300

BTBX38 Aluminum Mandrel (3/8") for BTB300

BTBX516 Aluminum Mandrel (5/16") for BTB300

BTBX58 Aluminum Mandrel (5/8") for BTB300

BTBX78 CPS Aluminum Mandrel (7/8") for BTB300

BTBXA1 Replacement Shoe Arm With 1/4"-3/8" Shoes BTB300

BTBXA2 CPS Shoe Arm 1/2"-7/8" (12mm-22mm) Shoes

BTBXH CPS Ratchet Mechanism For BTB300 Blackmax Ratcheting Tube Bender (For Imperial Or Metric) fits BTB300 CPS Blackmax Ratcheting Tube Bender With Reverse Bend 1/4" - 7/8"

BTBXR1 CPS Replacement Reverse Bender Mandrel Arm (Imperial & Metric)

BTBXR2 CPS Replacement Reverse Bender Shoe Arm

CBM516 Hilmor Compact Tube Bender Mandrel 5/16" 1839036

Maxi tube bender set for 3/8'', 1/2'', 5/8'', 3/4'', and 7/8'' soft copper and aluminum. Exact bending up to 90 degrees. Can be used in plumbing and heating installations, refrigeration, climate control, floor heating, and hydraulic systems. The open bending frame allows for the production of repeated alternate angled bends. The smooth-running feed lever is sealed in restricted places and for one handed operation. The side lever gives a quick release and reset of bending former. set includes basic tool, bending support, bending formers for 3/8'', 1/2'', 5/8'', 3/4'', 7/8'', a a steel carrying case.

RT24114 Tube Bender Set

Tube bender set for 1/4'', 5/16'', 3/8'', 1/2'' soft copper and aluminum. Exact bending up to 90º degrees. Special adjustments for small pipe diameters makes this ideal for refrigeration, air conditioning, oil supply, automotive, and pneumatic or hydraulic systems. The mechanical ratchet feed provides the ability for rapid and precise bending. The tooth rack with bayonette catch makes the bending formers quick and easy to change. The open bending frame allows for the production of repeated alternate angle bends. Set includes basic tool, bending formers for 1/4'', 5/16'', 3/8'', and 1/2'', and carrying case.

Tube bending set for 1/2'', 5/8'', and 7/8'' soft and hard copper, thin-walled coated copper, aluminum, brass, precision steel, and coated seamless stainless steel tubes. Exact cold bending up to 180º degrees. The unique design provides bending without deforming the pipe. The patented anti-stick system requires 42% less effort due to the lower friction and optimum distribution of the bending spray. The combination of guide shoe and bending former reduces the effort in bending without deformation or wrinkles. This base plate can be attached with additional handle for free hand bending up to 5/8'' diameter. The set includes bending formers for 12'', 5/8'' and 7/8'', bending spray and a steel carrying case.

Standard tube bender for 5/16'' OD soft copper and aluminum. Radius 0.95 inches, Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation.

Standard tube bender for 5/8'' OD soft copper and aluminum. Radius 2.28 inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation.

Standard tube bender for 1/4'' OD soft copper and aluminum. Radius 0.71 inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation.

Standard tube bender for 3/8'' OD soft copper and aluminum. Radius 1.18 inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation.

The RT25142 Pro tube bender for 1/2'' OD semi-hard / Hard copper. Radius 1/2" inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation. The light construction results in fatigue-free hand operation. The clamp mechanism better holds the tube and enables the bending of even the shortest of tube pieces. The Tube Bender Pro is for 1/2" and 3/4" semi-hard and hard copper pipes and features a case iron body for longer life along with self adjusting shoe.

Mini tube bender for 1/4'', 5/16'', and 3/8'' OD soft copper, brass, and aluminum. Ideal for refrigeration, climate control, oil supply, automobile, hydraulic, and air pressure systems. Exact, two-handed bending up to 180º degrees. Minimum measurement and bending radius display on former for exact bending.

The RT25913 Pro tube bender for 1/2'' OD semi-hard / Hard copper. Radius 5/8" inches. Exact bending up to 180º degrees. Bending radius display on former for exact bending. Clamp mechanism for tighter tube hold to bend shorter tube pieces. Lightweight construction provides fatigue-free hand operation. The light construction results in fatigue-free hand operation. The clamp mechanism better holds the tube and enables the bending of even the shortest of tube pieces. The Tube Bender Pro is for 1/2" semi-hard and hard copper pipes and features a case iron body for longer life along with self adjusting shoe.

RT25914 JB Industries Standard Tube Bender 3/4" OD. Tube bender pro for 3/4" OD radius for semi-hard and hard copper pipes and features a case iron body for longer life along with self adjusting shoe. JB is the exclusive distributor of the high quality German engineered tubing tools from Rothenberger. Rothenberger uses only the highest quality materials set against the strictest German standards to render the best and most reliable tools in the marketplace. Backed by a 24 month over-the-counter warranty, JB stands behind these products as if they were putting the JB name on them. Once you get your hands on these tools, you will see why Rothenberger tools are Just Better.

RT52000D JB Industries Counter Display (10 RT52000) - 10 PACK PIPE SHEAR DISPLAY - This pipe shear precisely cuts PVC, PP, PE, PB, PEX, CPVC, and PVDF. These shears are the finest you can find in the market. The quick release lever provides automatic opening of the blade at the push of a button. Ideally meshed cutting curve provides for minimum effort during the cutting operation.

Universal multibender for 1/2'', 5/8'', 3/4'', and 7/8''. Ideal for soft copper and aluminum.

The CPS TB04 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight 9/16" radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely.

The CPS TB05 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless  steel.

The CPS TB06 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless  steel.

The CPS TB08 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless  steel.

The CPS TB10 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless  steel.

The CPS TB12 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement. Wide hook grips tubing securely. Applicable materials: Soft copper, aluminum, brass, steel, stainless  steel.

Replacement Hook, Screw and Washer for CPS TB12.

The CPS TB14 is an Open side type tubing bender which slips over tube at any point. Makes smooth tight radius bends up to 180° with minimum effort and no scoring or flattening of tubing. Calibrated to show angle of bend for accurate tubing placement.

PRO-SET Universal Ratcheting Tube Bender for soft copper. aluminum, and light wall hydraulic tubing from 3/8" (6mm) to 7/8" (22mm). Includes Reamer, Premium Pipe Cutter (TC274), and Case.

The TB368 is a triple head, all-metal lever type tube bender for 1/4″, 5/16″, 3/8″ (6, 8, 10mm) O.D. soft copper, aluminum and thin wall steel tubing. Creates smooth, tight radius bends up to 90° with minimal effort and without scoring or flattening of the tube. Engraved bend angles are easy to view. Wide hook securely grips tubing.

1/4" Spring Tube Bender

5/16" Spring Tube Bender

3/8" Spring Tube Bender

1/2" Spring Tube Bender

5/8" Spring Tube Bender

3/4" Spring Tube Bender

Small Replacement Bar for CPS TB250.

Large Replacement Bar for CPS TB250.

3/8'' (10mm) Replacement Mandrel for CPS TB250.

1/2'' (14mm) Replacement Mandrel for CPS TB250.

5/8" (16mm) Replacement Mandrel for CPS TB250.

3/4" (19mm) Replacement Mandrel for CPS TB250.

7/8" (22mm) Replacement Mandrel for CPS TB250.

1/4" (6mm) Replacement Mandrel for CPS TB250.

5/16" (8mm) Replacement Mandrel for CPS TB250.

Replacement Ratchet Mechanism for CPS TB250.