|
|
|
|
|
|
0045 Mo-Clamp Angle Bite Clamp
|
|
|
 Mo-Clamp 0045 Angle Bite Clamp - The Angle Bite is a self-cleaning, self-tightening clamp with a gator tooth design and a 45 degree head for those hard-to-pull areas, such as the Mercedes 107 front chassis rail. Drop-forged wedge for extra durability and long life.
|
|
|
|
|
|
|
|
|
|
0054 Mo-Clamp Mini Spring Clamp
|
|
|
Mo-Clamp 0054 Mini Spring™ Clamp - Spring loaded for easy opening. Includes Oval Loop for use with Slip Hook for easy hook-up. For light sheet metal in those tight places. Cross-hatch tooth design for an aggressive bite. Clamp has raised "ears" to hold bolts stationary, for easy one-handed tightening.
|
|
|
|
|
|
|
|
|
|
0100 Mo-Clamp B Clamp
|
|
|
Mo-Clamp 0100 B® Clamp - Self-Tightening. The bodyman's right arm. It grabs 2Ľ" (57 mm) of metal, making it ideal for hard pulls on heavy metal or frame. Original wedge. Original straight cut tooth design.
|
|
|
|
|
|
|
|
|
|
0200 Mo-Clamp C Clamp
|
|
|
Mo-Clamp 0200 C™ Clamp - Self-Tightening. Its 11/2" (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Original straight cut tooth design.
|
|
|
|
|
|
|
|
|
|
0205 Mo-Clamp Dyna-Mo C Body Clamp
|
|
|
Mo-Clamp 0205 Dyna-Mo C™ Clamp - New generation of Mo-Clamps. Self-tightening. Great for getting over lips or edges. Drop-forged round wedge to keep the twist out of chain, aggressive cross-hatch tooth design, spring-loaded for easy opening.
|
|
|
|
|
|
|
|
|
|
0250 Mo-Clamp Mini-C Clamp
|
|
|
Mo-Clamp 0250 Mini C™ Clamp - Self-tightening. Small, light, versatile. Has a minimum of 1 1/2" (38mm) throat clearance to reach around flanges, cowls, pinch welds and lips. Butts against panels where only narrow bite is available. Original wedge. Original straight cut tooth design.
|
|
|
|
|
|
|
|
|
|
0300 Mo-Clamp Jr. Clamp
|
|
|
Mo-Clamp 0300 JR™ Clamp - One of Mo-Clamp's original self-tightening clamps. A must for every body man. 1˝" wide bite for aggressive pulling. Original wedge. New angled tooth design.
|
|
|
|
|
|
|
|
|
|
0305 Mo-Clamp Dyna-Mo Jr. Body Clamp
|
|
|
Mo-Clamp Dyna-Mo™ JR Clamp - New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggressive cross-hatch tooth design, spring-loaded for easy opening.
|
|
|
|
|
|
|
|
|
|
0400 Mo-Clamp W Clamp
|
|
|
Mo-Clamp 0400 W® Clamp - Self-Tightening. The Super Clamp for the tough jobs. Ultra-wide gripping surface. Grabs 4Ľ" of metal. Original wedge. Original straight cut tooth design.
|
|
|
|
|
|
|
|
|
|
0405 Mo-Clamp Dyna-Mo W Clamp
|
|
|
Mo-Clamp 0405 Dyna-Mo™ W Clamp - New generation of Mo-Clamps. Self-Tightening. Wider tooth surface to grab more thin metal without tearing. Drop-forged round wedge to keep twist out of chain and aggressive cross-hatch tooth design.
|
|
|
|
|
|
|
|
|
|
0452 Mo-Clamp 7-Ton Flash Clamp
|
|
|
Mo-Clamp 0452 Flash Clamp™ 7-Ton Clamp - Spring-loaded operation makes each clamp easy to use. Mo-Grip surface and pivoting head allows for a secure grip on most surfaces. Heat-treated investment cast jaws provide years of effective pulling power. Drop-forged wedge. Jaws can be easily replaced.
|
|
|
|
|
|
|
|
|
|
0480 Mo-Clamp 135ş Swivel Body Clamp
|
|
|
Mo-Clamp 0480 135 - Degree Swivel Clamp - New generation of Mo-Clamps. Self-tightening. Provides multi-angle pulling from a single clamp. This clamp allows the drop-forged round wedge to move within the clamp's channel to provide the exact angle of pull needed - while allowing it to pivot to avoid twists in the chain.
|
|
|
|
|
|
|
|
|
|
0550 Mo-Clamp T.O. (Tight Opening) Body Clamp
|
|
|
Mo-Clamp 0550 T. O. (Tight Opening) Clamp - Mo-Clamp's new design Tight Opening Clamp has all the same gripping dimension requirements as the old design. Redesigned and strengthened with our totally new screw drive mechanism. Still a full 3 ton capacity. Still able to reach core support and upper sheet metal areas where no other can. Perfect for small pick-up frame rails.
|
|
|
|
|
|
|
|
|
|
0655 Mo-Clamp Dyna-Mo Box Clamp
|
|
|
Mo-Clamp 0655 Dyna-Mo Box™ Clamp - These heat-treated jaws reach around flanges and other obstructions to get a grip on hard-to-reach surfaces. Severe duty tooth design for aggressive pulling power.
|
|
|
|
|
|
|
|
|
|
0660 Mo-Clamp Long Nose Clamp
|
|
|
Mo-Clamp 0660 Long Nose™ Clamp - Similar to the popular #0300 Jr® Clamp, the Long Nose is self-tightening and includes the original wedge. Cross-hatch tooth design, spring loaded for easy opening, deeper reach for hard-to- get-to areas.
|
|
|
|
|
|
|
|
|
|
0670 Mo-Clamp Baby Box Clamp
|
|
|
Mo-Clamp 0670 Baby Box™ Clamp - Self-tightening. Great for single-lip flanges and inside frame horns. Original wedge; cross-hatch tooth design; spring-loaded for easy opening. Throat clearance of 1 1/2" high (38 mm), 1 1/4" deep (32 mm).
|
|
|
|
|
|
|
|
|
|
0750 Mo-Clamp Lip Grip With Side Pull Bracket
|
|
|
Mo-Clamp 0750 Lip Grip™ with Side Pull - Multi-purpose clamp with gator teeth for sure, non-slip pulls on any lip. Use the Lip Grip as a sandwich clamp on quarter panels or floor sections. The chain loop permits pulling at any angle. Side pull bracket adds a 90-degree angle for two-directional pulling.
|
|
|
|
|
|
|
|
|
|
0800 Mo-Clamp Tac-N-Pull With Pull Plates
|
|
|
Mo-Clamp 0800 Tac-N-Pull™ With Plates - For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch. Includes two 3" plates, two 11/4" plates, and two 1" plates.
|
|
|
|
|
|
|
|
|
|
0801 Mo-Clamp 1" Tac-N-Pull Replacement Plate
|
|
|
1" Tac-N-Pull Replacement Plate
|
|
|
|
|
|
|
|
|
|
0802 Mo-Clamp 1 1/2" Tac-N-Pull Replacement Plate
|
|
|
1 1/2" Tac-N-Pull Replacement Plate
|
|
|
|
|
|
|
|
|
|
0803 Mo-Clamp 3" Tac-N-Pull Replacement Plate
|
|
|
Replacement adaptor plates for the -0800 3” pull plate.
|
|
|
|
|
|
|
|
|
|
0805 Mo-Clamp Tac-N-Pull Replacement Plate Kit
|
|
|
Mo-Clamp 0805 Tac-N-Pull "PLATES ONLY" - For hard-to-hold pulls. Tack weld one of the reusable plates. Attach clamp and pull. Break tack weld with a grinding cut-off wheel or cutting torch.
|
|
|
|
|
|
|
|
|
|
1000 Mo-Clamp Handy Hook
|
|
|
Mo-Clamp 1000 Handy Hook™ - A great time saver with Mo-Clamp's easy hook-up system. No chain is too long and no hooks are needed on the chain. Alloy heat-treated steel. Pulling slots can be used with Hole Pull Adapters (#0900). Designed for use with 3/8" chain.
|
|
|
|
|
|
|
|
|
|
1100 Mo-Clamp Handy Link
|
|
|
Mo-Clamp 1100 Handy Link™ - Chain too long? Make it shorter! Chain too short? Make it longer! Alloy heat-treated steel. Pulling slots can be used with Hole Pull Adapers (#0900). Designed for use with 3/8" chain.
|
|
|
|
|
|
|
|
|
|
1250 Mo-Clamp Panel Puller
|
|
|
Mo-Clamp 1250 Panel Puller™ - The Panel Puller is light and easy to use with a slide hammer or pulling post. Use the Panel Puller on fender openings, deck lids, door posts and other openings. Heat-treated alloy steel.
|
|
|
|
|
|
|
|
|
|
1300 Mo-Clamp Sill Hook
|
|
|
Mo-Clamp 1300 Sill Hook™ - One of the handiest tools in the shop for a quick pull almost anywhere. New round opening allows for pulling with a slip hook. New casting process makes for a tighter grain structure, resulting in more strength. The original straight-cut tooth design pattern is machined for superior gripping and pulling power. Sill Hook end is 2 1/2” wide.
|
|
|
|
|
|
|
|
|
|
1320 Mo-Clamp Slim Line Sill Hook
|
|
|
Mo-Clamp 1320 Slim Line Sill Hook™ - Use this new hook from Mo-Clamp to pull front hinge pillars, center pillars posts, rear hinge sections or any location where you need a broad, thin pulling surface. Made from Mo-Clamp Tru-Tuff© drop-forged, heat-treated alloy steel with a pulling capacity of a full 4 tons. Heavy duty eye nut allows easy connection with Mo-Clamp chain and slip hooks.
|
|
|
|
|
|
|
|
|
|
1350 Mo-Clamp Versa Hook
|
|
|
Mo-Clamp 1350 Versa Hook™ - The Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Original straight-cut tooth design. Versa Hook end is 2 1/2" wide.
|
|
|
|
|
|
|
|
|
|
1850 Mo-Clamp Inline Sllider Body Clamp
|
|
|
The MoClamp “InLine Slider” TM self-tightening clamp is made of heat-treated Tru-Tuff steel alloy.
|
|
|
|
|
|
|
|
|
|
2400 Mo-Clamp 3MA Strut Multi-Adapter Plate
|
|
|
Mo-Clamp Multi-Adapter Plate™ - Designed for a wide variety of strut towers.
|
|
|
|
|
|
|
|
|
|
3071 Mo-Clamp Mo-Ty Anchor Pot
|
|
|
Mo-Clamp 3071 Mo-Ty™ Chain Anchor Pot - The harder you pull, the firmer it wedges. Allows full 360 degrees of pull without chain touching floor. Can be removed and installed in a different location. When correctly installed, top is flush with floor when not in use. Can be easily cleaned by lifting top. a 3 1/2" (89mm) cored hole is required in concrete floor.
|
|
|
|
|
|
|
|
|
|
3100 Mo-Clamp 4 Pc. Sheet Metal Hook Set
|
|
|
Mo-Clamp 3100 Sheet Metal Hook™ (Swivel Head Set of 4) - Alloy heat-treated hooks increase pulling options. May be used with #0810 and #0820 Hole Pull Plates to pull, or use in combination with clamps. Set includes one each of #3110, #3120, #3130, and #3140.
|
|
|
|
|
|
|
|
|
|
3110 Mo-Clamp Small Flat Nose Sheet Metal Hook
|
|
|
Alloy heat-treated hooks increase pulling options. May be used wtih Hole Pull Plates (#0810 & #0820) to pull, or use in combination with clamps.
|
|
|
|
|
|
|
|
|
|
3120 Mo-Clamp Small Round Nose Sheet Metal Hook
|
|
|
Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (-0810 & MCL-0820) to pull, or use in combination with clamps.
|
|
|
|
|
|
|
|
|
|
3130 Mo-Clamp Large Flat Nose Sheet Metal Hook
|
|
|
Alloy heat-treated hooks increase pulling options. May be used with Hole Pull Plates (#0810 & #0820) to pull, or use in combination with clamps.
|
|
|
|
|
|
|
|
|
|
4010 Mo-Clamp Frame Rack Unibody Clamp
|
|
|
Bar holes designed for three ways of pulling, using Shackle (#4044) and Oval Loop (#4043).
|
|
|
|
|
|
|
|
|
|
4020 Mo-Clamp Four Way Pull Clamp
|
|
|
Includes Shackle (#4044) and Oval Loop (#4043). Clamp has recessed pockets to hold bolts stationary for easy tightening.
|
|
|
|
|
|
|
|
|
|
4021 Mo-Clamp Frame Rack Dyna-Mo #1
|
|
|
One pair Frame Rack Dyna-Mo jaws with 7" draw bar, one side pull bracket, shackle and oval loop.
|
|
|
|
|
|
|
|
|
|
4030 Mo-Clamp Three-Way Pull Clamp
|
|
|
Includes Oval Loop (#4043). Clamp has recessed pockets to hold bolts stationary for easy tightening.
|
|
|
|
|
|
|
|
|
|
4035 Mo-Clamp Angle Bracket
|
|
|
Bolt to surface for a 90-degree straight pull, or use with #4030 3-Way Pull Clamp, #4025 pair of Frame Rack Jaws, or #4010 Frame Rack Unibody Clamp.
|
|
|
|
|
|
|
|
|
|
4043 Mo-Clamp Oval Loop
|
|
|
Mo-Clamp 4043 Oval Loop - Replacement part.
|
|
|
|
|
|
|
|
|
|
|
4045 Mo-Clamp 5/8" X 3-1/2" Bolt, Nut Washer
|
|
|
5/8" x 3-1/2" Bolt, Nut & Washer.
|
|
|
|
|
|
|
|
|
|
4048 Mo-Clamp Many Hole Wide Draw Bar
|
|
|
Mo-Clamp 4048 Many Hole Wide Draw Bar™ - Great for bolting to a frame, unibody rail or to other places to make a secure pull.
|
|
|
|
|
|
|
|
|
|
4050 Mo-Clamp Multi Angle Clamp
|
|
|
The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc.
|
|
|
|
|
|
|
|
|
|
4058 Mo-Clamp Mac II Multi-Angle Clamp
|
|
|
Mo-Clamp 4058 MAC-2 Multi Angle Clamp - New style features cross-hatch tooth pattern which holds well with less distortion of metal.
|
|
|
|
|
|
|
|
|
|
4110 Mo-Clamp Single Claw Hook
|
|
|
Mo-Clamp Single Claw Hook - Drop forged! Use as an accessory with draw bars or chain. Use a pair with Triangle or Oval Loop as a chain shortener, double hook, bumper hook. Designed for use with 3/8" chain.
|
|
|
|
|
|
|
|
|
|
4120 Mo-Clamp Double Claw Hook
|
|
|
Mo-Clamp 4120 Double Claw Hook - For use as a chain shortener, chain connector or double hook.
|
|
|
|
|
|
|
|
|
|
4145 Mo-Clamp Double Grab Hook Assembly
|
|
|
Mo-Clamp 4145 Double Grab Hook™ - For quick shortening of a ⅜" chain. Another time saving tool. Usually several is a good thing.
|
|
|
|
|
|
|
|
|
|
4146 Mo-Clamp Grab/Slip Hook Combo
|
|
|
Mo-Clamp Grab-Slip Combo™ - Grab hook on one end; slip hook on the other. For hooking into clamps or pull rings. Fast hook-up to any section of ⅜" chain. Grab hook on one end; slip hook on the other.
|
|
|
|
|
|
|
|
|
|
4150 Mo-Clamp Double Looper
|
|
|
Mo-Clamp 4150 Double Looper™ - Two #4110 Single Claw Hooks with #4052 Triangle. Grabs bumpers or panels. Easy ⅜" chain connection. Triangle allows for center pull.
|
|
|
|
|
|
|
|
|
|
|
5130 Mo-Clamp 3/4" X 5" Bolt & Nut For C
|
|
|
3/4" x 5" Bolt & Nut For C.
|
|
|
|
|
|
|
|
|
|
|
5225 Mo-Clamp 1/2" X 2 1/4" Bolt, Nut & Washer
|
|
|
1/2" x 2-1/4" Bolt, Nut & Washer For Mity Bite & Lip Grip.
|
|
|
|
|
|
|
|
|
|
|
5246 Mo-Clamp 1/2" X 3" Nut, Bolt, Washer & Spring For 0205
|
|
|
1/2" x 3" Nut, Bolt, Washer & Spring for #0205.
|
|
|
|
|
|
|
|
|
|
5247 Mo-Clamp 1/2" X 2 1/2" Nut, Bolt, Washer & Spring For 0305 & 0405
|
|
|
1/2" x 2-1/2" Nut, Bolt, Washer & Spring for #0305 & #0405.
|
|
|
|
|
|
|
|
|
|
|
5335 Mo-Clamp 5/8" X 4 1/2" Bolt & Nut For 0250
|
|
|
5/8" x 4-1/2" Bolt & Nut For Mini-C.
|
|
|
|
|
|
|
|
|
|
|
5350 Mo-Clamp 5/8" X 3" Bolt & Nut For 0300
|
|
|
5/8" x 3" Bolt & Nut For JR.
|
|
|
|
|
|
|
|
|
|
|
5355 Mo-Clamp 5/8" X 4 1/2" Nut, Bolt & Washer For 4020
|
|
|
5/8" x 4-1/2" Nut, Bolt & Washer for #4020.
|
|
|
|
|
|
|
|
|
|
|
5400 Mo-Clamp Nut & Bolt Replacement Pack
|
|
|
Mo-Clamp 5400 Bolt & Nut Replacement Pack - Most commonly used bolts, nuts, washers, and clevis pins. A diagram on the box helps you immediately locate the part you need. Mo-Clamp bolts have special grades of material and are heat-treated to our Specifications. Contains Grade 5 and Grade 8 bolts specific to individual Mo-Clamp tools.
|
|
|
|
|
|
|
|
|
|
5616 Mo-Clamp Door Post Puller/Twister
|
|
|
Mo-Clamp 5616 Door Post Puller / Twister™ - Designed to put a twist in your pull with its V-shaped gusset. There are three positions from which to pull. For use on bolt-type hinge pillars.
|
|
|
|
|
|
|
|
|
|
5623 Mo-Clamp Hinge Plate
|
|
|
Mo-Clamp 5623 Hinge Plate™ - Use in existing holes in frame structures or body panels. Comes with 3/8" Shackle (#5626) for angle pulls.
|
|
|
|
|
|
|
|
|
|
5710 Mo-Clamp Mo-Block Dolly
|
|
|
Mo-Clamp 5710 Mo-Block Dolly™ - Straighten frame rails in about 80% of front-end damage cases. Inserted into the frame rail pocket, the dolly straightens the high strength, low-alloy metal easily and quickly. Dolly design keeps hands and fingers safely away from the impact area.
|
|
|
|
|
|
|
|
|
|
5711 Mo-Clamp Mo-Wedge
|
|
|
Mo-Clamp 5711 Mo-Wedge™ - High impact polycarbonate plastic. Great for spreading damaged body panels. Used with Mo-Block Dolly for straightening out the rail pocket.
|
|
|
|
|
|
|
|
|
|
5800 Mo-Clamp G Body Clamp
|
|
|
Mo-Clamp 5800 G Clamp™ - Easier pulling with multiple pulling angles. Has a throat opening of 4 inches allowing plenty of room to get over, around and behind the damage. And the moveable shackle means more versatility. Made of heat-treated alloy steel for extra strength. Includes swivel pad.
|
|
|
|
|
|
|
|
|
|
5802 Mo-Clamp Jumbo G Clamp
|
|
|
Mo-Clamp 5802 Jumbo G Clamp™ - Has a throat opening of 7 inches to get over, around and behind the damage. Multiple holes allow for various angle pulls. Includes swivel pad. Optional (sold separately) #4059 ⅝" Screw Pin Shackle adds even more versatility.
|
|
|
|
|
|
|
|
|
|
5810 Mo-Clamp Pull Down Assembly
|
|
|
Mo-Clamp 5810 Down-Pull Assembly™ - For straight down or angled pulling. Works with pulling towers and bench systems. Large 5 inch wheel prevents undue chain wear. Secured with 1 inch heat-treated pin. When used with the #5811 Block Pulley Adapter it offers horizontal pulls.
|
|
|
|
|
|
|
|
|
|
5815 Mo-Clamp Down Pulley/Snap Block Assembly
|
|
|
Mo-Clamp 5815 Down Pulley / Snap Block Assembly™ - A combination of the #5810 Down Pulley Assembly and the #5811 Block Pulley Adapter it is perfect for horizontal pulls.
|
|
|
|
|
|
|
|
|
|
5830 Mo-Clamp Saddle Mate
|
|
|
Mo-Clamp 5830 Saddle Mate™ - For use with your Selsun™ Air Jack. Unique formed shape gives the Saddle Mate superior strength. Custom die form to fit 99-percent of all automobiles.
|
|
|
|
|
|
|
|
|
|
5900 Mo-Clamp Mini-Bite With Pull Ring
|
|
|
Mo-Clamp 5900 Mini-Bite™ with Pull Ring - The reversible Mini-Bite™ Clamp is designed to get around lips and corners for strong pulls and to pull narrow seams and lips. Cross-hatch tooth design assures a firm grip. Designed for use with a 3/8" chain.
|
|
|
|
|
|
|
|
|
|
6008 Mo-Clamp 3/8" X 8' Chain With Grab Hook
|
|
|
Mo-Clamp 6008 3/8" x 8' Frame Chain™ - Mo-Clamp chain is manufactured in accordance with the NACM Specification for chain, ASTM Standard A391 and ASTM Standard A413 for grade 70 carbon steel chain. Mo-Clamp chain is protectively plated with yellow dichromate. 6210 ⅜" Alloy Clevis Grab Hook included.
|
|
|
|
|
|
|
|
|
|
6009 Mo-Clamp 3/8” X 8’ Frame Straightening Chain With Grab Hook
|
|
|
3/8” X 8’ Frame Straightening Chain With Grab Hook
|
|
|
|
|
|
|
|
|
|
6010 Mo-Clamp 3/8" X 10' Chain With Grab Hook
|
|
|
Mo-Clamp 6010 3/8" x 10' Frame Chain™ - Mo-Clamp chain is manufactured in accordance with the NACM Specification for chain, ASTM Standard A391 and ASTM Standard A413 for grade 70 carbon steel chain. Mo-Clamp chain is protectively plated with yellow dichromate. 6210 ⅜" Alloy Clevis Grab Hook included.
|
|
|
|
|
|
|
|
|
|
6012 Mo-Clamp 3/8" X 12' Frame Straightening Chain With Grab Hook
|
|
|
Mo-Clamp 6012 3/8" x 12' Frame Chain™ - Mo-Clamp chain is manufactured in accordance with the NACM Specification for chain, ASTM Standard A391 and ASTM Standard A413 for grade 70 carbon steel chain. Mo-Clamp chain is protectively plated with yellow dichromate. 6210 ⅜" Alloy Clevis Grab Hook included.
|
|
|
|
|
|
|
|
|
|
6210 Mo-Clamp 3/8” Alloy Clevis Grab Hook
|
|
|
Mo-Clamp 6210 3/8” Alloy Clevis Grab Hook™ - Replacement hook for the #5811 Block Pulley Adapter. Hook includes clevis pin and rue clip.
|
|
|
|
|
|
|
|
|
|
6250 Mo-Clamp 3/8" Super Alloy Clevis Slip Hook
|
|
|
Mo-Clamp 6250 3/8" Super Alloy Clevis Slip Hook™
|
|
|
|
|
|
|
|
|
|
6300 Mo-Clamp Nylon Sling
|
|
|
Mo-Clamp 6300 Nylon Sling™ - Protects area where chain may damage structure. Can be made into a cinch. 30" long and 3" wide.
|
|
|
|
|
|
|
|
|
|
6302 Mo-Clamp 30” Sling With Pear & Triangle
|
|
|
Mo-Clamp 6302 Sling with Pear & Triangle™ - Protects finish from mars. Wraps around and protects pillars while spreading the force. Forged pull loops for exceptional toughness.
|
|
|
|
|
|
|
|
|
|
6305 Mo-Clamp GM "R" Hook 5/16"
|
|
|
Mo-Clamp 6305 GM "R" Hook™ with Chain - Original shipping tie down for GM vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
|
|
|
|
|
|
|
|
|
|
6306 Mo-Clamp GM "R" Hook 3/8"
|
|
|
Mo-Clamp 6306 GM "R" Hook™ with Chain - Original shipping tie down for GM vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
|
|
|
|
|
|
|
|
|
|
6309 Mo-Clamp GM "R" Hook With Grab Hook
|
|
|
Mo-Clamp 6309 GM "R" Hook™ with Grab Hook - Original shipping tie down for GM vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
|
|
|
|
|
|
|
|
|
|
6310 Mo-Clamp Ford "T" Hook 5/16"
|
|
|
Mo-Clamp 6310 Ford "T" Hook™ with Chain - Original shipping tie down for Ford vehicles. Excellent around the frame machine to help hold a frame while diamond is being pulled.
|
|
|
|
|
|
|
|
|
|
6314 Mo-Clamp M Hook W/ Chain
|
|
|
Works on most full-frame vehicles for a tie-down.
|
|
|
|
|
|
|
|
|
|
6350 Mo-Clamp Cable Sling
|
|
|
Mo-Clamp 6350 Cable Sling™ - Wrap around pulls. Can be used as a choker.
|
|
|
|
|
|
|
|
|
|
6400 Mo-Clamp Regular Deep Hook Set
|
|
|
Mo-Clamp 6400 Regular Deep Hook Set™ - For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. #210030 Small Bracket (2" x 3") and #210020 Large Bracket (2" x 9") included.
|
|
|
|
|
|
|
|
|
|
6410 Mo-Clamp Jumbo Deep Hook Set
|
|
|
Mo-Clamp 6410 Jumbo Deep Hook Set™ - For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. #210030 Small Bracket (2" x 3") and #210020 Large Bracket (2" x 9") included.
|
|
|
|
|
|
|
|
|
|
6420 Mo-Clamp Mini-Deep Hook
|
|
|
Mo-Clamp 6420 Mini Deep Hook Set™ - For fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. Includes #210060 Horizontal Bracket and #210070 Vertical Bracket. Brackets are interchangeable with the #6400 Regular Deep Hook Set and #6410 Jumbo Deep Hook Set.
|
|
|
|
|
|
|
|
|
|
|
850019 Mo-Clamp Blk Plastic Thumb Screw
|
|
|
Mo-Clamp 850019 Black Thumb Screw - Replacement part for 7000 and 7001 Tram Gauges.
|
|
|
|
