100385 Robinair Power Cord Strain Relief / Heyco Bushing
Robinair Power Cord Strain Relief Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord. Securely anchors, insulates, and protects cables at panel entry points.
114748 Robinair Hose Gaskets For 1/4 And 1/2 ACME Hoses (Each)
These gaskets fit 1/4" flare and 1/2 ACME standard hose fittings. If you are doing maintenance on you unit it's a good idea to replace these as well as they become crushed over time resulting in poor flow or restriction due to swelling. These are standard for some other vendors hoses as well.
Discontinued See 40083
121909 Robinair Power Cord Bracket
Robinair Power Cord Bracket. "U" shaped metal bracket that holds the strain relief bushing and power cord in place at entry point of unit.
123787 Robinair Discharge Oil Coalescing Element
123787 Robinair Discharge Oil Coalescing Element separates oil from vapors in the discharge gas stream so it can be returned back to the compressor. This filter can become plugged when a compressor fails from a burn out or overheating due to waxes normally found in refrigerants.
13172 Robinair Filter Pump Oil Maintenance Kit With 34724 Filter
Keep recovery and recycling units operating at peak efficiency with a convenient maintenance kit. Contains one quick change filter-drier to be used on either R-12 or R-134a stations, and one 16 ounce bottle of our Premium High Vacuum Pump Oil. Designed for newer units manufactured after 1998.
13203 Robinair Premium High Vacuum Pump Oil Quart Bottle
Robinairís "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time.
13204 Robinair Premium High Vacuum Pump Oil Gallon Bottle
Robinairís "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time. Robinair "High Vacuum Pump Oil" has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oilís purity, thinning it and reducing the pumpís ability to reach a deep vacuum.
16103 Robinair 10 In. Pneumatic Wheel Foam Filled Replaces 19823
Robinair 10" Heavy Duty Foam Filled Pneumatic wheel for Sidewinder style Cart units. Replaces 19823. No more flat tires. Deep tread design for no slip traction even on wet or oily floors. A tubeless design with long air stems provide easy inflation and long life.
16214 Robinair Calibration Weight
Robinair Calibration Verification Weight (1.18lbs.). Easily maintain your units accuracy with this handy calibration weight. Ships with each new unit. This is a factory part, calibrated for accuracy.
19639 Robinair Gauge Lens For RA19786 RA19787
19639 Robinair Gauge Lens For RA19786 RA19787. Clear protective cover for the high side and low side gauges. See individual Gauges for a replacement.. Made of durable acrylic for long life, used on both Low and High side gauges. (this gauge lens does not have the needle used for Min / Max reading for monitoring pressure swing on air conditioning systems).
19740 Robinair Source Tank Filter For 134A
19740 Source Tank Filter For 134A units. Protect your investment from debris and harmful elements from tank manufacturing processes. Metal debris can foul solenoids causing unnecessary repairs and equipment failures. Install this filter on the hose end of your tank add hose to protect your machine. 100 mesh screen is replaceable or cleanable. 1/2" Female ACME X 1/2" Male ACME fittings Installs inline of tank fill hose.
19823 Robinair 10 In. Pneumatic Wheel
Robinair 10" Heavy Duty Foam Filled Pneumatic wheel for Sidewinder style Cart units. Deep tread design for no slip traction even on wet or oily floors. A tubeless design with long air stems provide easy inflation and long life.
Discontinued See 16103
34215 Robinair Printer Paper 3 Pack
Printer Paper (2.35" Wide) 3 Pack For ACR2000 342000 ACR2005, Single Rolls of thermal paper for printers on advanced recovery units. When paper breaks down and your printer exhibits signs of not properly printing, try replacing the roll first.
34724 Robinair Recovery Recycling Unit Filter Drier
The 34724 Robinair filter drier has been specifically formulated to trap acid and particulates and is formulated to remove water from the refrigerant. DO NOT accept look alike or knock off filters. You must change the filter-drier to assure adequate moisture and contaminant removal. Typically, you can recycle up to 300 pounds (136 kilograms) of R-134a or 600 pounds (272 kilograms) of refrigerant between filter changes (depending on your model). To help you know when youíve reached that point, the unit displays the warning message prompting you to change the filter drier.
518638 Robinair 15 Amp Magnetic Circuit Breaker
518638 Robinair 15 Amp Magnetic Circuit Breaker provides protection of main electrical input. Single Pole 15 Amps 125-250 AC. Mounts Via Snap In Bezel. Terminal Connection 0.250 Spade terminals.
539007 Robinair Tank Fill Hose With 1/2 ACME QuickSeal Fitting
Robinair Premium Refrigerant Charging Hoses are built for long life and dependability. A strong, six-sided crimp provides a reliable connection between the hose and the barb, even at maximum pressure. Enviro-Guard Hose Quick Seal Fittings prevent any refrigerant loss when disconnecting hoses from fittings eliminating harmfull refrigerant burns.
Discontinued See 567272
539649 Robinair SD Card Reader Circuit Board
SD Card Reader Circuit Board allows units to be upgraded via a system card or implements changes or enhancements to the operation of the unit such as 34411-A Robinair Vehicle Information Database 2008 Update For 34788 Units.Easily installs, does not include cable. (pay attention to the numbering of the cable terminals when removing damaged card slot).
540066 Robinair Calibration Weight 34988 34788 34288
Robinair Calibration Verification Weight for 34988 34788 and 34288 units. Easily maintain your units accuracy with this handy calibration weight. Ships with each new unit. This is a factory part, calibrated for accuracy.
567272 Robinair Tank Fill Hose With Inline Filter 1/2 ACME QuickSeal Fitting
567272 Robinair Tank Fill Hose With Inline Filter provides protection of debris in virgin supply tanks from contaminating your machine. 1/2 ACME QuickSeal Fitting. Robinair Premium Refrigerant Charging Hoses are built for long life and dependability. A strong, six-sided crimp provides a reliable connection between the hose and the barb, even at maximum pressure. The coupler nuts are deeply knurled for quick finger-tightening. Enviro-Guard Hose Quick Seal Fittings prevent any refrigerant loss when disconnecting hoses from fittings eliminating harmful refrigerant burns.
62242 Robinair 240" Low Side Blue Enviro-Guard System Hose R134A
Blue 240" Enviro-Guard Hose for Automotive R-134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. Clearly marked for R-134a. 740 psi working pressure, 3700 psi burst pressure.
62246 Robinair 240" High Side Red Enviro-Guard System Hose R134A
Red 240" Enviro-Guard Hose for Automotive R-134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. Clearly marked for R-134a. 740 psi working pressure, 3700 psi burst pressure.
RA19427 Robinair High Pressure Switch
High Pressure Switch If pressure inside the unit exceeds 435psi, the switch opens, stopping all functions of unit. NOTE: Switch opens at 435psi +/- 10psi and resets at 320psi +/- 20psi.
RA19786 Robinair Low Side Gauge - Generic
Low Side Gauge - Generic Used to monitor the suction pressure of the vehicle being serviced. 1/8" female pipe connection back tap. -30hg-0 To 0-125 PSI Range, 350 PSI Retard, PSI, Kpa, Bar Pressure Scales On Face. Includes Mounting Hardware, Loctite sealant, Instructions.
RA19787 Robinair High Side Gauge - Generic
High Side Gauge - Generic Used to monitor the discharge pressure of the vehicle being serviced. 1/8" female pipe connection back tap. 0-500 PSI Range, PSI, Kpa, Bar Pressure Scales On Face. Includes Mounting Hardware and Instructions.
RA19916 Robinair Fastener & Seal Kit For Servicing A/C Units
Fastener Seal and hardware kit for Robinair recovery units is a service provider must have. This kit contains 38 of the most requested hardware and small maintenance items on most Robinair machines many of which are difficult or impossible to find by themselves, including gaskets seals, bolts and screws, pneumatic fittings, door latches, Torx screws, flare gaskets and other hard to find or specific related items. 3/8 Hose Gasket, 1/4 Fl Copper gasket, O'Rings, Screws Torx, Speed Nuts, Tinnerman U Clip, 1/2 Acme Jam nut, Pneumatic Fittings, Pan Head screws, Grommets, Door Latch Receptacle, Connector, Plastite connector, Bezel 7002K / 700Z, Door Latch Spring, Injector Bulkhead Fitting, Oil Injector Cap And Bulkhead Fitting, Vacuum Pump Fill Caps, Shreader Cores. Housed in a Double sided flip top case with extra space for other items.
RA20002 Robinair Scale / Magnet
Scale / Magnet Sends a signal to the main board for accurate weight readings during charging and recovery. Magnet is used to attach a calibrated steel ball underneath the unit for checking the scale's accuracy.
RA20020 Robinair Compressor For 34788 34288 34988 Units
115 Volt Cubigel Compressor for 34788, 34288, 34988 units. Includes all hardware and electrical for a complete install. Additional Plastic tubes and compression rings (RA20006, RA20005) may be necessary to complete the install. Inspect all fittings for leaks before running unit.
RA20057 Robinair Alignment Tool
RA20057 Robinair Alignment Tool for RA20056 Load Cell, when installing the load cell this tool is needed to ensure proper alignment.
RA20058 Robinair 34788-ACR2000 Hose Flush Update Kit
RA20058 Robinair 34788 / ACR2000-ACR2005 Hose Flush Update Kit. This update applies to All ACR200 ACR2005 & 34788 units. All 34788 units manufactured July 2008 already have this feature. When adding the Hose Flush feature, the software in your 34788 unit must be 1.092 or newer. Please Call for assistance for updating your software.
RA20069 Robinair Control Board
RA20069 Robinair Control Board. User interface for controlling refrigerant recovery, recycling, recharging, and other functions of the unit. Installation of this part requires a service centers assistance to install properly.
RA20070 Robinair Relay Board New Style
Relay Board Controls power to internal components 110v and 12v output. The RA20070 relay board requires software that is unique to this board and is not compatible with previous relay board software or units. Service Center install only.
RA20088 Robinair Internal Storage Vessel (Domestic)
RA20088 Robinair Internal Storage Vessel (Domestic units only, AirCom Version). Includes all valves, fittings and solenoid for complete install. Due to changes in manufacturing this tank may not be the same as the vessel in your machine. This should only be installed by an authorized service center to ensure proper fitment and calibration of your unit.