110928 Robinair ISO Valve Handle For 15368 Isolation valve on 15400 15600 pumps . Vacuum Isolation Valve Assembly For 15400 / 15600 / 15434 Series Vacuum Pumps. Isolates the pumping section from the system being evacuated to prevent air from entering the system while checking vacuum level or leak testing with a micron gauge.

110973 Robinair Operating Manual For 15400 15600 Vacuum Pump. This is the original factory manual shipped with your unit. Available as Hard Copy and a download PDF file when you check out. You will receive both.

112226 Robinair Gas Ballast with Gasket For Rotary Vane Vacuum Pumps

117680 Robinair Oil Level Sight Glass 15/16 - 20 UNEF For 15600 15400 15434 15120 model pumps.

13067 Robinair High Vacuum Grease is a silcone based lubricant designed for high vacuum assembly applications. A stiff, nonmelting silicone lubricating material used to lubricate synthetic and silicone rubber gaskets being used in high temperature applications. High Vacuum Grease resists mineral oils and common gases and works well for a setting gel to capture o-rings during assembly.

Coupler - 4,6 and 10 CFM Vacuum Pumps. Accommodates 5/8" & 1/2" Shaft Motors

Oil Drain Fitting & Cap Replaces 48116

Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time.

Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time. Robinair "High Vacuum Pump Oil" has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil’s purity, thinning it and reducing the pump’s ability to reach a deep vacuum.

Module Cover And Gasket For 15400 & 15600 Series Vacuum Pumps. Replaces original cover if found to be leaking or damaged from drop.

Vent Bolt - 15400 / 15600 Series Vac Pumps

Inlet Tee 1/4" Male Flare X 1/2" Male Flare. Includes Caps.

Motor & Power Cord For 15400 / 15434

Robinair Handle Power Cord Switch Assembly 15400 - 15600 Series Pumps. Kit includes Handle, Power Cord, Switch, butt connectors, screws for mounting and o-rings for the exhaust vent banjo bolt.

Seal Kit For 15400 / 15600 Series Vacuum Pumps, Includes shaft seal protector and seal install tool. Rebuilds the ISO Valve seals, main shaft seal, Pump housing seals and exhaust seals.

Isolates the pumping section from the system being evacuated to prevent air from entering the system while checking vacuum level or leak testing with a micron gauge.

Base & Foot Assembly For 15400 / 15600 / 15434 Series Vacuum Pumps

Motor & Power Cord For 15600 Vacuum Pump

Oil Fill Plug For 15400 / 15600 Vacuum Pumps

Robinair Vacuum Pumps are engineered specifically to meet your A/C maintenance needs and to give you trouble-free operation. Take advantage of our years of experience and know-how developing pumps to help you do your job faster and better. Designed for use on A/C-R systems using CFCs, HCFCs, and HFCs in conjunction with mineral oil, ester oil, alkylbenzene oil and PAG oil as lubricants. Do not use with ammonia or lithium bromide systems; not for use with flammable refrigerants.

15495 Robinair Combination Inlet Tee For R-12 And R-134a For 15400 15600 Series Vacuum Pumps. Convert your pump to R-12 and R-134a. Solid brass “tee” replaces inlet fittings on pump; includes a branch with a ¼" MFL fitting for R-12 (and other refrigerants) and a branch with ½" Acme fitting for R-134a.

Forward Pumping section for 4 CFM Vacuum Pumps. Includes Pump, Iso Valve Installed, drain fitting and oil fill cap. For model 15400.

Forward Pumping section for 6 CFM Vacuum Pumps. Includes Pump, Iso Valve Installed, drain fitting and oil fill cap. For model 15600.

ROBINAIR 6 CFM 2 STAGE ROTARY VANE VACUUM PUMP Thoroughly evacuate todays tighter systems with their increased sensitivity to contaminants. Iso-Valve isolates pump from system, making it easy to measure rate of rise.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 6). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

QUICK SEAL Caps,1/4" Sae Flare (Pkg. Of 25). Extra long skirting allow for a deep gasket, shallow "o-ring" type caps can actually depress cores causing leaks when over tightened. The gaskets in these are also replaceable, See 40083 for replacements. Features a core tool on the cap for convenience.

1/2" Flare Cap

48116 Robinair Vacuum Pump Oil Drain Kit Replaced with 13193

1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.

RT200R Refrigeration Technologies NYLOG RED (CFC/HCFC Mineral or AB). NYLOG gasket and thread sealant renders a strong, flexible, lubricative glaze that prevents high pressure leakage through refrigeration gaskets and threaded fittings. NYLOG never hardens and always remains temperature and vibration resilient. Nylog Red is recommended for Mineral or Alkyl Benzene Systems

RT200RP Refrigeration Technologies NYLOG RED (CFC/HCFC Mineral or AB) (2-Pack). NYLOG gasket and thread sealant renders a strong, flexible, lubricative glaze that prevents high pressure leakage through refrigeration gaskets and threaded fittings. NYLOG never hardens and always remains temperature and vibration resilient. Nylog Red is recommended for Mineral or Alkyl Benzene Systems