Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Welder Parts - MIG > 117-078-100 83156 Century 155GL Flux 105 Amp Cold

117-078-100 83156 Century 155GL Flux 105 Amp Cold


Notes on Gun Liners:
If the gun has a red trigger, the steel liner is pn 334-468-666. If the gun has a black trigger and TWECO on the side of the handle, it uses liner KP1937-3
117-078 Replacement Parts List
Item No.
Customer #
Description
1
246-260-000
Heat Potentiometer, 10K, 1/4 Watt
2
216-100-000
Fan Motor
3
410-900-XXX
Front Panel
4
541-057-000
Strain Relief
5
238-223-666
Cable Assembly
6
246-107-000
Knob
7
246-423-000
Power Switch, DPST Lighted
8
238-593-000
10' Mig Gun (Used on units built after 01/01/2001)

238-566-000
10' Mig Gun (Used on units built from 05/02/1999 to 12-31-2000)

238-507-000
6' Mig Gun (Used on units built before 05/03/1999)
9
410-869-XXX
Control Panel
10
880-460-666
(880-569-666) Wire Speed Control
11
880-414-888
Transformer
12
410-865-XXX
Left Side Panel
13
312-295-666
Side Latch with Clip
14
246-414-000
Terminal Block
15
880-406-666
Drive Motor with Gearbox

310-187-000
Steel Drive Roller, 0.024 / 0.030 / 0.035

880-427-666
Neoprene Drive Roller for Aluminum
16

Tension Kit Less 312-110-666
17

Spindle
18
410-867-XXX
Center Panel
19
880-411-666
Circuit Board with Heat Sink
20
216-102-000
Thermostat
21
213-035-000
Capacitor, 59,000 uf, 40 Volt DC
22
880-413-666
Heat Pot. with Harness
23
253-333-666
Push In Union Fitting (5/32")
24
248-329-666
Power Cord
25
512-215-666
Bushing
26
239-074-666
Strain Relief
27
245-145-666
25 Ohm, 50 Watt Resistor
28
312-296-666
Handle
29
410-864-XXX
Right Side Panel
30
246-258-666
24 Volt DC Relay (Only on units before 01/01/2001
31
880-431-000
Base
32
246-248-000
880-426-000 Thermal Protector
33
412-635-010
Tank Bracket
34
334-460-001
Regulator (Not Shown)
35
059-217-040
40" 5/32" Gas Hose (Not Shown)
36
43090
0.025 Contact Tip (Not Shown)
37
43100
0.030 Contact Tip (Not Shown)
38
43110
0.035 Contact Tip (Not Shown)
39
43480
Steel Welding Nozzle (Not Shown)
40
312-110-666
Wire Spool Adapter (Not Shown)
41
239-010-102
Ground Clamp (Not Shown)
Sort By:
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031) 239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

Discontinued
253-333-000 Fitting, Union 5/32 253-333-000 Fitting, Union 5/32

Gas Hose Fitting, For 5/32" hose  with Female Tube fittings on both ends. If you need gas hose see s26399-28. For regulators see 334-438-000 or 334-460-001.

Price $27.91
253-406-666 Hose Connector 1/4" MPT X 5/32" Tube Press In 253-406-666 Hose Connector 1/4" MPT X 5/32" Tube Press In

253-406-666 Hose Connector 1/4" MPT X 5/32" Tube Press In

Price $14.88
310-187-666 Drive Roller .024/.030/.035 310-187-666 Drive Roller .024/.030/.035

310-187-666 Drive Roller .024/.030/.035

Price $39.95
334-474-666 Tweco Trigger 2010-2095 334-474-666 Tweco Trigger 2010-2095

334-474-666 Tweco Trigger 2010-2095 For older 238-566 and 238-567 Mig guns.

Price $10.95
334-476-666 Steel Liner .023 - .035 334-476-666 Steel Liner .023 - .035

334-476-666 Steel Liner .023 - .035

Discontinued See KP45-40-15
880-406-001 Gearmotor / Drive Assembly  .024.  Replaces part numbers 880-382-000, 880-382-001, 880-382-666, 880-406-000, 880-406-666 880-406-001 Gearmotor / Drive Assembly .024

Gearmotor / Drive Assembly  .024.  Replaces part numbers 880-382-000, 880-382-001, 880-382-666, 880-406-000, 880-406-666

Price $175.00
880-411-666 Circuit Board/Rectifier  Assembly 880-411-666 Circuit Board/Rectifier Assembly

Circuit Board / Heatsink assembly. Used on 117-077 2155 Solar 90 amp mig, 30-125 infinite amp range,cold, 83137 Century, 135GS mig 90 amp, 83136 Century, 135GL, 83155 Century, 155GS Mig, 83156 Century, 155GL Flux

Price $150.00
KP35-40-15 Lincoln Electric Steel Liner .023 - .035 KP35-40-15 Lincoln Electric Steel Liner .023 - .035

KP35-40-15 Lincoln Electric Steel Liner .023 - .035, Replaces Part# 334-476-666, KP2013-1, KP1937-3.

Price $29.75
Portable Wire Feed Welder Owners Manual Wire Feed Welder Owners Manual

This Operators manual provides specific information for your model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your Welder. This document is provided as a download PDF format. We suggest you save it to your computer for future reference.
Model Coverage: 117-078, 83155, 83156, 20559, Migmaster 150

Price $8.00
   
 
117-078-100 83156 Century 155GL flux 105 amp cold