C-1012/2S Christie Automotive Battery Charger Repair Parts
![]()
| Part No. | Description | Qty | Cross Ref. |
| 079-344-000 | Connector 1 6pt Molex | 2 | 524716-007 |
| 214-008-666 | SCR Assembly w/instructions | 2 | 130101-002 |
| 238-662-000 | Cable 1 6/2 SPT-2 Black | 7 | 511116-008 |
| 245-125-000 | Fuse 20 amp Blade Type | 2 | 546120-001 |
| 246-008-666 | Knob 1 1/4 dia. Pointer | 2 | 520570-044 |
| 246-430-666 | Timer3 hr 24v | 2 | 581130-006 |
| 246-435-100 | Switch Assy Rotary w/Resistors | 2 | 130032-001 |
| 246-439-000 | Switch SPST Lighted Rock | 2 | 578900-041 |
| 246-532-000 | Knob, 24 hour timer | 2 | 520570-037 |
| 247-129-000 | Voltmeter, 25v. Snap-in | 2 | 536221-205 |
| 247-142-000 | Ammeter 15a Snap-in | 2 | 535711-215 |
| 248-358-000 | Power Cord #18 w/plug | 1 | 526030-012 |
| 249-055-666 | Clamp, 50 Amp w/black insulator | 2 | 597700-214 |
| 249-089-666 | Clamp, 50 Amp w/red insulators | 2 | 597700-213 |
| 312-331-000 | Fuseholder, Blade Type | 2 | 546301-001 |
| 312-353-000 | Spacer .190x.375x.750, nylon | 2 | 100126-024 |
| 541-011-000 | Strain Relief 5KN-4 | 2 | 518108-011 |
| 541-012-000 | Strain Relief SR6N3-4 5/8 | 1 | 518110-004 |
| 753-991-000 | DecalMC1012/2 Timer Switch | 1 | 000019-001 |
| 865-856-666 | PCB Assy. Rev A, Calibrate | 2 | 130024-001 |
| 865-859-000 | Transformer 1012 | 2 | 130022-001 |
Calibration:Calibrate the open circuit voltage to 22 volts d.c. by adjusting R21 on the PCB.
Calibrate the short circuit current to 9 amps with the current selector (amp hour) switch in the high position by adjusting R27 on the PCB.
The five switch positions should be approximately 1 a., 1.5 a., 4 a., 6 a./ and 9 a.
