690-129 Goodall Cover Latch. Note: Includes latch only; Goodall 70-513 Strike sold separately. Requires drilling for mounting hole location.

Generator Pulley for use on all Start-All generators

70-333 Goodall Brush Arm & Spring (Old Style Generators)

70-374 Goodall Commutator End Plate (Old Style With Bronze Bearing Oiler). This is not to be fitted with newer style ball bearing generators.

70-385 Goodall Armature Dual Ball Bearing

70-390 Goodall Terminal Stud Brush Holder Package (Old Style Grounded Generators) See parts 70-333 brush arm & spring and 70-046 brush.

70-483S GoodAll Switch Assembly (11-610). If purchasing this switch for older two regulator units or when out of stock you may want to upgrade to the new style regulator kit 61-785.

70-600-K GoodAll Regulator / Voltage Control has been discontinued. For a replacement see these upgrade kits.
61-812 Upgrade Voltage Control Kit to New Style, 11-712
61-813 Upgrade Voltage Control Kit to New Style, 11-708KVC
61-786 Upgrade Voltage Control Kit to New Style, 11-922
61-784 Upgrade Voltage Control Kit to New Style, 11-620
61-785 Upgrade Voltage Control Kit to New Style, 11-610

71-535 GoodAll Diode Plate Assembly (11-620)

71-958 GoodAll Air Pressure Gauge (0-200psi)

77-321S GoodAll Resistor Assembly

79-373 Goodall Field Coil For Older Generators. (Same as 79-398)

79-375S Goodall Generator Dual Ball Bearing Case Ground

79-375S-CR GoodAll Factory Rebuilt Generator B/B Ground Thru Case

79-392 GoodAll Brush Plate Assembly (79-371 Gen.)

Commutator End Plate for Bearing

79-396 GoodAll Brush Lead & Terminal, Carbon (79-371 Gen.)

79-398 Goodall Field Coil For 79-371 Generator

79-399 Goodall Ball Bearing For Generators (79-373, 79-375, 79-406)

79-400S Goodall Spring Set (for 79-371, 373, 375, 406)

79-405 GoodAll Brush Set, Carbon (79-375 generator)

79-411 GoodAll Insulator kit

79-500S Goodall Generator, Case Ground, 500 series

830-518 Goodall Voltmeter 0-18 Volts D.C. (71-506S)

830-520 Goodall Ammeter 300 Amp 11-610 11-620 (71-520S) with color indication for 11-610 11-620 11-900 series units. Replaces 70-447S & 830-447S.

860-224 Goodall Solenoid (77-181S1). Heavy duty solenoid rated for continuous duty. Do not replace with off brand or non specific units rated for starter duty. Also ideal for remote control of power circuits on battery charging systems, low-voltage DC motor generator sets, golf carts, and in-plant lift trucks.

880-205 Goodall Solenoid Copper Strap

880-408 GoodAll Brush (Each)

890-079 GoodAll Switch Assy 11-602 Switch assembly for the following units with one voltage control module*: 11-601, 11-602, 11-605, 11-607, 11-608, 11-610, 11-611, 11-612, 11-802. *For units with two voltage control modules, see our upgrade kits to bring your unit up to the current technology standards. Replaces 70-483S

890-321 Goodall Resistor Assembly

890-436 Goodall Cable Clamp Assembly 30 Foot Duplex 1/0 Gauge (70-436S)