#10 1/2" Pan Head A2 Phillips Head Stainless Steel Sheet Metal Screw 20 Pack. Replace those unsightly rusting, loose or missing cabinet screws with our Stainless screws for a neat finish. Oversized to accommodate loose cabinet or stripped holes.

8' 6AWG Welding Wire Lead Set with heavy duty polished clamps featuring coated clamp handles. a 50 lb. Jaw Strength provides positive connections and color coded wires make for easy identification. These even have molded strain relief built on the cables. Ring terminal connections make installation a snap.

238-260-666 Century Positive Cable & Clamp Assembly 6ga 106" for Century / Solar battery chargers. Universal Style for other chargers. Booster Clamp features 6 Gauge solid copper wire, dual power jaws for better conductivity with a braided internal power crossover strap (distributes full power to both jaws), heavy duty construction for durability and long life.

238-261-666 Century Negative Cable & Clamp Assembly 6ga 106" for Century / Solar battery chargers. Universal Style for other chargers. Booster Clamp features 6 Gauge solid copper wire, dual power jaws for better conductivity with a braided internal power crossover strap (distributes full power to both jaws), heavy duty construction for durability and long life.

246-041-666 Universal Selector Knob with set screw for controls with 1/4" Stem. Replaces all knobs with 1/4" diameter shaft. Fits 1/2 shaft and 3/4 style shaft stems.

Mini snap-in paddle handle rocker switch with are single pole double throw momentary contact arrangement ON-OFF-(ON) momentary and a 10 amp rating.

246-243-000 Circuit Breaker 12 Volt 50 Amp (578800-050). Universal Breaker replaces many older unit parts.

120 Minute mechanical timer with knob. 120 minute total time two 1/4 spade terminal connections, no finish bell. Replaces older timer 246-337-000, 246-167-000, 246-167-666. Mounting on your timer may be different than the replacement, inspect your unit before purchase, some older units may have had electric timers which may require rewiring. (Includes Screws)

Battery Charger Circuit Breaker. Dual 12 Volt 50 Amp, Single Pole Thermal Type Breaker (Paired), Bracket Type Mounting, 10-32 Studs.

247-058-666 Voltmeter Vertical 0-40 Volt

247-075-666 Ammeter Vertical 0-60 Amp Range. Features easy snap-in installation. Green Red Charge Rate face. 0-60 Amp range and bolt through induction pick-up for greater accuracy.

CORD POWER 18/3 7FT

Clamps Positive & Negative. Screw Type Connection for ring terminal cables to anchor wire for solderless connection. Dual Hot Jaws for better power distribution. Includes Phillips anchor screws. Does not include hardware for cables, (ring terminals, solder etc...).

Black Negative Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.

Red Positive Booster Clamp features full power jaws (distributes full power to both jaws), heavy duty construction for durability and long life, solid copper jaws for better conductivity, and a braided internal power crossover strap instead of wire for even power to the jaws.

412-751-666 Chrome Battery Charger Handle. Replaces 442-020-166 and other older Century / Solar Handles

442-020-166 Century Battery Charger Handle. Flat side black painted finish.

51-236 Goodall 250 Amp Heatsink Rectifier Kit 60 Amp Continuous Duty, 12 Diode Daisy Wheel Design. Extra Long center studs for thick transformer lead wires.

512-127-000 Rectifier Insulator Standoff. Connects to the back wall of the charger chassis to provide a mount for the rectifier.

865-638-100 Voltmeter Testmeter Vertical 0-18 Volt Alt Charge Face. 0-18 Volts DC Range Scale, Alternator Low / High / OK Scale, Percent Of Charge Scale, Vertical Display, 4 Point Snap In Mount, 1/4" Quick Disconnect Terminals, Circuit Board Attached & Calibrated, Includes Instructions. Replaces 865-512-100.

Voltmeter Testmeter Horizontal features easy snap-in installation, no tools required. Displays. Battery charge level scale, battery Condition Meter, Alternator test scale Bad Weak Good Scale. 1/4" Spade Terminal Connections make installation a snap. Displays both 6 and 12 Volt Systems.

865-682-666 Heatsink Rectifier.  Product as pictured.  Does not include any mounting hardware (512-127-000).

Snap-In installation, no tools required. 0-20 Volt Range, 0-100% Charge Scale, Alternator Test Scale, Reverse Polarity Indicator Light (Red), Charge Complete Indicator (Green) 247-120 Meter & Circuit Board, 1/4" Spade Terminal Connections.

Voltmeter Testmeter Horizontal features easy snap-in installation, no tools required. Displays. Battery charge level scale, battery Condition Meter, Alternator test scale Bad Weak Good Scale. 1/4" Spade Terminal Connections make installation a snap. Displays both 6 and 12 Volt Systems.

TJ1-120MB Universal Mechanical 2 Hour Timer With Finish Bell. Mechanically controls charging in timed Mode, has "Hold" for manual un-timed charging. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept 1/4" Quick Disconnect terminals. Includes mounting screws. Replaces many older mechanical timers.