Century Drive Roller Key Set. For use with Mig welders made by Century Mfg Co. Set includes both flat stock and woodruf keys for most welders, use when buying a new drive roller. Some older units had the key made into the drive roller, the new style drives rollers are slotted and require a woodruf key to lock them to the shaft.

Capacitor for Century and other Welders. Replaces Marquette 40400027

216-062-666 Triac Relay 75 amp

Replaces 216-063-000, 216-067-000, 216-072-000, 216-085-366, 216-085-666. For fan blade see 316-010-000.

221-006-666 Century Drive Transistor for 860-614-666 Circuit Board.

238-283-100 Mig Gun Assembly 10'

15' HD Mig Gun with Century rear end.  Rating: 225 amps with C25 gas, 240 amps with CO2 @ 60% duty cycle. Can be used on the following models: 117-009 Century Maintenance Mig, 117-018 Century 225 (Matco WF225, Mac WS225), 117-023 Solar 2225, 117-024 Snap-On YA240, 117-035 Solar 2225, 117-042 Century 83225 (Dayton 5Z136/A/B, Marquette M02225, Matco WF225a, Mac WS225K), 117-046 Century 83226 Cutting Mig, 117-056 Snap-On YA205B), 117-062 Snap-On YA240B (Matco WFW250)

12' HD Mig Gun with Century rear end. Rating: 225 amps with C25 gas, 240 amps with CO2 @ 60% duty cycle. Can be used on the following models: 117-009 Century Maintenance Mig, 117-018 Century 225 (Matco WF225, Mac WS225), 117-023 Solar 2225, 117-024 Snap-On YA240, 117-035 Solar 2225, 117-042 Century 83225 (Dayton 5Z136/A/B, Marquette M02225, Matco WF225a, Mac WS225K), 117-046 Century 83226 Cutting Mig, 117-056 Snap-On YA205B), 117-062 Snap-On YA240B (Matco WFW250)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key.

312-045-666 Front Panel Female Receptacle Kit for many Century made welders. For matching male plugs see part # 239-052-908. Replaces part # 312-028-100.

334-252-000 Conductor Tube #90031 Mig Gun

Century Drive Roller .024 .030 .035 in. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key, 071-014-908 Century Drive Roller Key Set.

860-614-666 Circuit Board  W/ Drive Transistor. Replaces the 860-614-000 and the 510-045-000.

860-616-908 Century Composite Aluminum Drive Roller 43240. (860-908-002) For use with soft welding wire in all Mig welders made by Century Mfg Co.

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack). Same as KP11-30, KP2039-2B1, M15523, Mig030.  Replaces Century and Marquette Part Numbers: 4310, 43100, 334-160-000, M15523, KP11-30 & Others. Used on Century made welders model 117-001 to 117-090.

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

KH726 Lincoln Nozzle, Flux-Cored (each)

KP11-45 Lincoln .045" Tweco Style Mig Contact Tip (Sold Each) Replaces KH713, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

KP21-62-FAS Lincoln Nozzle, Spot (each).Lincoln Electric/Century Spot Welding Nozzle (1 pack). Replaces part numbers 4329, 43290, 334-211-000, 334-211-100, 334-211-500, 334-211-908, KH727, KP1956-1, Magnum 100L, Tweco 21-62-FAS.

KP21T-50 Lincoln Nozzle, Fixed Recess .505 in (12.8 mm) inner diameter. The nozzle protects threads and openings during the MIG welding process, directs shielding Gas around the tip and MIG wire for protection. Use when welding with shielding Gas only. Steel Welding.

KP21T-62 Lincoln Nozzle, Aluminum (each). Century Aluminum Nozzle (1 pack). Replaces part numbers 4330, 43330, 334-210-000, 334-210-100, 334-210-300, 334-210-500.