1/4" FNPT, for large bore valves

1/4" Barb M-Style W/Drag Guard

P-style couplers are HD steel with eight locking balls, Max inlet pressure: 300 PSI, SCFM: 68

G- style couplers are 1/2" basic size, steel, max. inlet pressure: 300 PSI, SCFM: 99

G- style couplers are 1/2" basic size, steel, max. inlet pressure: 300 PSI, SCFM: 99

1819 Milton Industries "G" Style 3/8" Male NPT Plug. 1/2” basic flow size, Maximum inlet pressure: 300 PSI, G-Style couplers are steel plated to resist rust, Maximum temperature: 250° F, G-Style plugs are case hardened steel, plated to resist rust, Air flow: 99 SCFM, Also known as “1/2" flow T-Style®", Seals: Buna-N

G- style plugs are case hardened steel

1/4" Female Body H-Style

H- style couplers are steel, Max. inlet pressure: 300 PSI, SCFM: 67

3/8" Male Plug H-Style

3/8" Female Plug H-Style

H- style plugs are case hardened steel

G- style plugs are case hardened steel

G- style plugs are case hardened steel

G- style plugs are case hardened steel

G- style plugs are case hardened steel

19304 Titan 3 Way Composite Coupler Universal Style Accepts A Style: ARO 210 style, M Style: Milton or Industrial style, T Style: Tru-Flate / Parker Automotive style. 3-Way Composite Coupler - Female: This coupler will accept the three most popular nipple styles, it is light and durable with nylon construction and can has a maximum working pressure of 210 PSI.

19305 Titan AMT 3-Way Composite Coupler - Male: This coupler will accept the three most popular nipple styles, it is light and durable with nylon construction and can has a maximum working pressure of 210 PSI.

19320 Titan Thread Seal Tape

19322 Titan 2pc I/M Steel Male Plugs: This item provides you with two steel 1/4" NPT male quick-connect fittings.

19325 Titan 2pc I/M Steel Female Plugs: This item provides you with two steel 1/4" NPT female quick-connect fittings.

19326 Titan I/M Steel Female Coupler: This is the quick-connect for the end of air hoses and is compatible with plug equipped accessories.

19327 Titan Swivel Plug: This swivel plug is for those tools that are not always convenient to have a fixed hose position / angle so you can get to those tricky spots.

19329 Titan Thread Seal Tape (10 Pack)

19330 Titan 4pc I/M Connector Kit: This all steel kit has one 1/4 inch female coupler, one 1/4 inch male plug, one 1/4 inch female plug and one 1/4 inch double male connector.

19333 Titan 5pc I/M Coupler and Plug Set: This set lets you put a quick connector on one hose end and receptacles on up to four accessories.

19343 Titan I/M Steel Male Coupler: This item has a male connector for screwing in to the hose end allowing the use of air tools and accessories equipped with quick connect plugs.

19345 Titan 3/8in Hose Mender: This hose mender kit has enough hardware to repair two breaks in a 3/8" I. D. hose or hoses. It comes with two double male ended brass hose fittings and four hose clamps. Get yours today and repair those partially or totally cut hoses and save some of your hard earned money.

19346 Titan 3/8in Hose Ends: This hose end kit has enough hardware to repair two breaks in a 3/8" I. D. hose ends. It comes with two double male ended brass hose fittings and two hose clamps. Get yours today and repair those partially or totally cut hoses and save some of your hard earned money.

19361 Titan Double Male Connector

19369 Titan 1/4in Swivel Connector: Prolong the life of your air hoses by installing this swivel connector. Prevents kinks and twisting that shortens the life of air hoses and it has an air flow knob to reduce or shut off flow of air to the hose or tool dependent on installation location.

19430 Titan 2pc A Style Female Plugs

19431 Titan 2pc A Style Male Plugs

19432 Titan 2pc T Style Female Plugs

19433 Titan 2pc T Style Male Plugs

19434 Titan 1/4in Hose Mender KIt

19437 Titan Universal Coupler

19439 Titan 1/4in NPT Tee Fitting

19440 Titan 1/4in Male to 1/4in Female Coupling

19441 Titan 1/4in Female to 1/4in Female Coupling

Control air pressure as needed. Designed with four position on-off detent stops. Openings: 1/4" NPT Male x 1/4" NPT Female. Not a shut-off valve. Brass construction resists oxidation.

3 Way Air Swivel

45207 Titan 20pc Hose Clamp Assortment

Dual-Head Chuck Free flowing for tire changers only, not for inflator gages

For dual and straight head chucks

1/4" Female Grip Chuck (Free flowing for tire changers non sealing)

1/4" M. End, 5/16" ID Hose

1/4" Coupler Set

Increased air flow efficiency conserves compressed air and increases pneumatic power to each line running off the air compressor.

Increased air flow efficiency conserves compressed air and increases pneumatic power to each line running off the air compressor.

Increased air flow efficiency conserves compressed air and increases pneumatic power to each line running off the air compressor.

Increased air flow efficiency conserves compressed air and increases pneumatic power to each line running off the air compressor.

Hose Mender, 3/8" ID Hose

M. Hex Nipple, 1/2"X1/2" NPT

Straight head 1/4" FNPT

1/4" Female Air Chuck

"M" style couplers are brass with brass sleeves, max. inlet pressure:300PSI, max temp.:250°F, air flow: 40 SCFM

"M" style couplers are brass with brass sleeves, max. inlet pressure:300PSI, max temp.:250°F, air flow: 40 SCFM

"M" style couplers are brass with brass sleeves, max. inlet pressure:300PSI, max temp.:250°F, air flow: 40 SCFM

"M" style couplers are brass with brass sleeves, max. inlet pressure:300PSI, max temp.:250°F, air flow: 40 SCFM

"M" style plugs are case hardened steel, plated to resist rust

“A” Style ARO “210” Style 1/4” Basic Size Push type, steel, plated to resist rust, max.inlet pressure: 300 PSI, max.temp.: 250°F, Air flow: 34 SCFM

"T" style plugs are case hardened steel, plated to resist rust

"T" style plugs are case hardened steel, plated to resist rust

"T" Style coupler bodies are brass, max. inlet pressure: 300 PSI, max. temp. 250°F, Air Flow 40 SCFM

"T" Style coupler bodies are brass, max. inlet pressure: 300 PSI, max. temp. 250°F, Air Flow 40 SCFM

'L' Style 1/4 NPT Male Plug

1/4" Female Plug L-Style

"L" Style couplers are push type, steel, plated to resist rust. Max. inlet pressure:300 PSI, max. temp.: 250°F, Air Flow: 32 SCFM

Chicago Pneumatic Air Flex Fitting 1/2" Npt - This air flex swivel connector reduces hose rigidity, allowing the hose to remain in the optimum position and reduces hose kinks. This also increases comfort of use, safety and it even reduces the risk of tendonitis.

Chicago Pneumatic Air Flex Fitting 1/4" Npt - This air flex swivel connector reduces hose rigidity, allowing the hose to remain in the optimum position and reduces hose kinks. This also increases comfort of use, safety and it even reduces the risk of tendonitis

Chicago Pneumatic Air Flex Swivel Connector 3/8" NPT - This air flex swivel connector reduces hose rigidity, allowing the hose to remain in the optimum position and reduces hose kinks. This also increases comfort of use, safety and it even reduces the risk of tendonitis.

Never fight an air hose again! For use with most air tools - Grinders, Sanders, Glue Guns, Staple Guns, Drills, Buffers, etc. The Dynaswivel is a universal-joint that connects portable air tools to an air line. It improves tool maneuverability, minimizes operator fatigue and extends hose life. Non-marring composite construction. Swivels 360 Degrees At Two Pivot Points allowing the air hose to drop directly to the floor while providing superb tool handling.

1/4_ NPS (F)

Hose Conn (1/4 Nps F)

P-style couplers are HD steel with eight locking balls, Max inlet pressure: 300 PSI, SCFM: 68

P-style couplers are HD steel with eight locking balls, Max inlet pressure: 300 PSI, SCFM: 68

"P" Style plugs are case hardened steel plated to resist rust

"P" Style plugs are case hardened steel plated to resist rust

1/4 in. Male Plug P-Style 2/cd

"P" Style plugs are case hardened steel plated to resist rust

H- style couplers are steel, Max. inlet pressure: 300 PSI, SCFM: 67

H- style couplers are steel, Max. inlet pressure: 300 PSI, SCFM: 68

G- style plugs are case hardened steel

G- style plugs are case hardened steel

"H" Style coupler bodies are steel, plated to resist rust. Max. inlet pressure: 300 PSI, Max. temp.: 250°F, Air Flow: 67 SCFM.

"H" Style coupler bodies are steel, plated to resist rust.Max. inlet pressure: 300 PSI, Max. temp.: 250°F, Air Flow: 67 SCFM.

"H" Style coupler bodies are steel, plated to resist rust.Max. inlet pressure: 300 PSI, Max. temp.: 250°F, Air Flow: 67 SCFM.

"H" Style plugs are case hardened steel plated to resist rust.

"H" Style plugs are case hardened steel plated to resist rust.

"H" Style plugs are case hardened steel plated to resist rust.

S184 Milton Industries Turbo Siphon Spray Cleaning Blow Gun (225 Max PSI). Keep your workshop, engines, gutters, and/or other desired areas clean with this Turbo siphon spray-cleaning blow gun, using compressed air with water, solvent cleaners, or liquids of your choice to clean heavier soiled surfaces and remove other unwanted messes. This versatile air tool can also be used to apply protective coatings or even remove grease, dirt, grimy sludge buildup in engines, and makes an essential tool for truck drivers, shops, garages, farming/agricultural and industrial use. Air inlet offers maximum flow for easy clean up and blowing off heavy shavings and chips to messy gutters. Meets OSHA standards 1910.242(B) compliance.

"H" Style plugs are case hardened steel plated to resist rust.

One each 715 coupler, three 727 male plugs and one 728 female plug

One each 715 coupler, three 727 male plugs and three 728 female plug

5 Piece A-Style Coupler Kit

Complete skin packed starter kit of Milton accessories needed for a multitude of compressed air functions. Inflating and checking tire pressure, inflating sports equipment, blowing debris, mending and connecting hoses, quick connection of air tools. Ideal for “Do-it-yourself”, small repair shop, mobile repair & maintenance.

5 pc. M-Style 3 in 1 Manifold Kit

Dual head, 1/4" FNPT

Safety grip chuck clip fits all standard single head air chucks

Dual head straight foot, for inner duals, both ends lock on threads, 1/4 FNPT

Male air chuck, 1/4 ID hose barb

S696 Milton KWIK Grip safety chuck, 1/4" NPT

European Style chuck clip, 1/4" ID hose barb.

S697-2 Milton Industries European Style Air Chuck With Grip Chuck Clip. European Style unique design allows chuck to easily clip on to valve thread for hands free tire inflation. Easy on style air chuck - press down on handle, push onto tire valve thread and release handle to grip thread. Maximum pressure of up to 150 PSI. Chuck clips on to tire valve.

Chuck clip with female chuck, 1/4" NPT

Female single head chuck, 1/4" NPT

“M” style couplers are brass with brass sleeves, max. inlet pressure: 300PSI, max temp.: 250°F, air flow: 40 SCFM

“M” style couplers are brass with brass sleeves, max. inlet pressure: 300PSI, max temp.: 250°F, air flow: 40 SCFM

“M” style couplers are brass with brass sleeves, max. inlet pressure: 300PSI, max temp.: 250°F, air flow: 40 SCFM

"M" style couplers are brass with brass sleeves, max. inlet pressure:300PSI, max temp.:250°F, air flow: 40 SCFM

“M” style plugs are case hardened steel, plated to resist rust

“M” style plugs are case hardened steel, plated to resist rust

"M" style plugs are case hardened steel, plated to resist rust

"M" style plugs are case hardened steel, plated to resist rust

AMT are push type couplers with drag guard. HD brass, accepts A M & T style plugs

"M" style couplers are brass with brass sleeves, max. inlet pressure:300PSI, max temp.:250°F, air flow: 40 SCFM

"V" Style Hi Flow couplers and plugs are specifically designed for use with HVLP spray guns.

"V" Style Hi Flow couplers and plugs are specifically designed for use with HVLP spray guns.

"V" Style Hi Flow couplers and plugs are specifically designed for use with HVLP spray guns.

1/4 in. F. Body & M. Plug A-Style

“A” Style ARO “210” Style 1/4” Basic Size Push type, steel, plated to resist rust, max.inlet pressure: 300 PSI, max.temp.: 250°F, Air flow: 34 SCFM

1/4 in. Male Body A-Style

“A” Style plugs are case hardened steel, plated to resist rust

“A” Style plugs are case hardened steel, plated to resist rust

"T" Style coupler bodies are brass, max. inlet pressure: 300 PSI, max. temp. 250°F, Air Flow 40 SCFM

"T" style plugs are case hardened steel, plated to resist rust

"T" style plugs are case hardened steel, plated to resist rust

“T” Style coupler bodies are brass, max. inlet pressure: 300 PSI, max. temp. 250°F, Air Flow 40 SCFM

"T" Style coupler bodies are brass, max. inlet pressure: 300 PSI, max. temp. 250°F, Air Flow 40 SCFM

“L” Style couplers are push type, steel, plated to resist rust. Max. inlet pressure: 300 PSI, max. temp.: 250°F, Air Flow: 32 SCFM

“L” Style plugs are case hardened steel, plated to resist rust

“L” Style plugs are case hardened steel, plated to resist rust

Variable Angle Swivel 1/4 in. MNPT x 1/4 in.

Variable Angle Swivel 1/4 in. MNPT x M-Style

Variable Angle Swivel 1/4 in. MNPT x A-Style

“M” Style Female Push Button Safety Coupler

“M” Style Male Push Button Safety Coupler

“A” Style Female Push Button Safety Coupler

“A” Style Male Push Button Safety Coupler