Coaxial Cable Stripper. Strips and cuts cables: RG6/RG6-OS/RG59. Provides one-step preparation for drop cables. Cassette blades require no adjustment and remove the proper length of jacket. Stripping cassette contains pre-set SK5 cutting blades and depth gauge.

4275-001 QuickCutter 1 Cable Cutter (9" Length) - These forged steel cable cutters have ergonomic insulated grips and can cut cables up to 2/0 gauge. They come with a 6 month warranty.

Knipex Diagonal Wire Cutters require 21% less effort than conventional cutters due to lever ratio, cutting edge angles and ergonomic handles.  Made from oil tempered chrome vanadium steel with induction hardened 64HRC cutting blades. 7401180 High Leverage Diagonal Cutters can cut up to .149" wire.

Knipex Diagonal Wire Cutters require 21% less effort than conventional cutters due to lever ratio, cutting edge angles and ergonomic handles.  Made from oil tempered chrome vanadium steel with induction hardened 64HRC cutting blades. 7401250 High Leverage Diagonal Cutters can cut up to .165" wire. Fixed forged-on-axle for durability and long tool life. Two piece joint versus using pins eliminates slopiness of joint.

The choice of material (Chrome Vanadium), lever ratio and cutting edge angle mean that KNIPEX - High Leverage Diagonal Cutters are particularly designed for the cutting of hard wires. Fixed, forged-on axle for work under continuous stress. Requires 21% less effort. Cutting a medium hard wire of 2.0 mm dia. High Leverage Diagonal Cutter (length 160 mm) requires a handforce of only 293 N (29.3 kp) instead of 370 N (37.0 kp) with a common Diagonal Cutter of the same length.

8" Lever Action Mini Bolt Cut. Precision cutting edges for soft and hard wire as well as piano wire. Cuts components like bolts, nails, rivets, etc. up to 5.2 mm dia. Exceptional cutting performance with minimum effort because of unsurpassed effective lever action design. Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC. Chrome vanadium heavy-duty steel, forged, oil-hardened.

For medium hard wire cables up to 6mm diameter, e.g. bowden cords, but also for cables and steel rods . Blade hardness approximately 62HRc. Cuts without burr, special blade geometry prevents the wire splaying with opening spring and latch. Cutting head forged. Head polished, handles plastic coated.

10" High Leverage CTr Cutter