Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Welder Parts - MIG > 117-051 WFWMDP Matco 110 amp MIG welder (phase-control)

117-051 WFWMDP Matco 110 amp MIG welder (phase-control)



117-051 Replacement Parts List
Item No.
Lincoln #
Customer #
Description
1

880-188-888
Main Transformer
2

880-215-888
Reactor Coil
3

880-225-666
Wire Harness
4
880-217-666
880-217-666
Main Circuit Board
5
216-053-666
216-053-666
Thermal Protector
6
S13490-109
213-035-666
Capacitor
7
216-087-666
216-087-666
Fan Motor
8

411-072-666
Fan Bracket
9

316-009-666
Fan Blade
10
S18414-1
239-159-666
AC Receptacle
11

246-116-666
Fuse Holder


245-060-000
Fuse Only, BAN30 or BLN30
12

860-523-666
Bleeder Resistor
13
S18475
248-226-666
Power Cord


4040,
248-227-100
Power Cord for 20 Amp Setting
14
216-086-666
246-212-666
Gas Solenoid
15
312-066-666
312-066-666
Bolt, Spindle, Spring, Washer & Wing Nut
16
312-110-666
312-110-666
Spool Adapter
17

330-029-666
Spring
18

081-055-666
Bolt with Washer & Nut
19

239-123-000,
239-208-000
Inlet Guide Tube
20
310-122-500
4323
0.024 / 0.030 / 0.035 Drive Roller


4347,
310-154-000
0.045 Serrated Drive Roller
21

312-107-000
Tension Arm Only
22
880-130-666
880-130-666
Drive Base Assembly with Arm
23
412-465-666
412-465-666
Gun Connector Block
24

412-464-666
Copper Jumper
25

410-651-010
Drive Deck
26

880-227-666
Gun Wire Harness
27
216-079-666
216-079-666
Drive Motor with Gearbox
28

410-650-010
Back Panel
29
246-258-666
246-258-666
Relay
30

410-648-666
Base
31
880-219-666
880-219-666
Wire Speed Cointrol with PCB
32

246-260-000
(245-108-666)
Potentiometer, 10K, 1/4 Watt
33

410-649-030
Front Panel
34

880-187-666 Spot-Stitch Wire Harness
35

880-214-666 Spot Stitch PCB
36

880-218-666 Brake Resistor
37

246-139-666 Knob, 1-3/16"
38

246-140-666 Knob, 1-1/2"
39
246-259-666
246-259-666
Rocker Switch, 90 / Off / 110
40
312-045-666
312-046-666
Receptacle Assembly
41

248-320-666
Polarity Jumper Cable
42

238-009-500
Ground Cable with Plug & Clamp 12' (Not Shown)
43
239-292-666
41001,
239-010-301
Ground Clamp (Not Shown)
44

246-103-666
Hood Handle (Not Shown)
45
238-155-000
4320
10' Mig Gun (less tip and nozzle) (Not Shown)
46
334-303-001
334-286-666
Gas Regulator (Not Shown)
47
059-245-666

Gas Hose (Not Shown)
Sort By:
059-245-666 Hose, Gas 059-245-666 Hose, Gas

059-245-666 Hose, Gas

Price $31.76
071-014-908 Century Drive Roller Key Set 071-014-908 Century Drive Roller Key Set

Century Drive Roller Key Set. For use with Mig welders made by Century Mfg Co. Set includes both flat stock and woodruf keys for most welders, use when buying a new drive roller. Some older units had the key made into the drive roller, the new style drives rollers are slotted and require a woodruf key to lock them to the shaft.

Discontinued
081-055-666 Screw With Washer & Nut 081-055-666 Screw With Washer & Nut

081-055-666 Screw With Washer & Nut

Discontinued
131-211-100 Mig Gas Conversion Kit 2111 131-211-100 Mig Gas Conversion Kit 2111

131-211-100 Mig Gas Conversion Kit 2111. Includes fixed regulator, 24 Volt Solenoid, Gas hose and clamps, fittings for hose and welder.

Discontinued
131-211-200 Mig Gas Regulator & Hose Kit 131-211-200 Mig Gas Regulator & Hose Kit

131-211-200 Mig Gas Regulator & Hose Kit. Includes fixed regulator, Gas hose and clamps, fittings for hose and welder.

Discontinued
216-041-666 115 Volt Fan Motor Open Frame Design 216-041-666 115 Volt Fan Motor Open Frame Design

115 Volt Fan Motor Open Frame Design. Clock Wise Shaft End, mechanically reversible for universal applications.

Discontinued See 610190
216-053-666 Thermal Breaker 216-053-666 Thermal Breaker

216-053-666 Thermal Breaker

Price $66.52
216-079-666 24 Volt Drive Motor 216-079-666 24 Volt Drive Motor

216-079-666 24 Volt Drive Motor

Discontinued
216-087-666 115 Volt Fan Motor W/ Leads 216-087-666 115 Volt Fan Motor W/ Leads

216-087-666 115 Volt Fan Motor W/ Leads

Discontinued See ASO610190
238-009-500 Century Ground Cable & Clamp 12 Foot (4007) 238-009-500 Century Ground Cable & Clamp 12 Foot (4007)

238-009-500 Century Ground Cable & Clamp 12 Foot 2 Gauge cable with Dinse Type Machine Plug (4007)

Discontinued
Gun, Mig 130 Amp 10 Ft. The 238-155-000 replaces: 238-224-000, 238-224-100, 238-155-100, 123-155-500, 4320 238-155-000 Gun, Mig 130 Amp 10 Ft

Gun, Mig 130 Amp 10 Ft. The 238-155-000 replaces: 238-224-000, 238-224-100, 238-155-100, 123-155-500, 4320

Discontinued
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031) 239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

Discontinued
245-108-666 Potentiometer 10k Ohm 245-108-666 Potentiometer 10k Ohm

245-108-666 Potentiometer 10k Ohm

Discontinued See 246-260-000
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. 246-086-666 Century Solenoid 24 Volt Air Service

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

Price $115.85
246-258-666 Relay, 24 Volt 246-258-666 Relay, 24 Volt

246-258-666 Relay, 24 Volt

Price $53.25
246-259-666 Rocker Switch DPDT Center Off 246-259-666 Rocker Switch DPDT Center Off

246-259-666 Rocker Switch DPDT Center Off. Rocker Switch, DPDT, Center Off used on the following Century welders: 117-051 (Century 83110, Century 83111, Solar 2150, Dayton 3Z913E, Dayton 3Z913F, Matco WFWMDP), 117-052 (Century 83105), 117-053 (Solar 2140, Sears Craftsman 20549), 117-055 (Matco WFFC), 117-058 (Snap-On YA217A), 117-059 (Snap-On YA219C, Matco WFW140), 117-061 (Century Powermate 83100, 117-064 (Century Powermate 83101)

Price $79.89
246-260-000 Potentiometer 10K Ohm 246-260-000 Potentiometer 10K Ohm

246-260-000 Potentiometer 10K Ohm

Discontinued
246-326-666 Century Gun Connector Knob 246-326-666 Century Gun Connector Knob

246-326-666 Century Gun Connector Knob

Price $11.95
310-119-500 Century Steel Drive Roller .030 .035 .045 4341 310-119-500 Century Steel Drive Roller .030 .035 .045 4341

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Discontinued
310-122-500 Century Steel Drive Roller .024 .030 .035 4323 310-122-500 Century Steel Drive Roller .024 .030 .035 4323

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Price $23.70
310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. 310-154-500 Century Steel Serrated Drive Roller .045 4347

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key.

Discontinued See 310-119-500
312-045-666 Receptacle Assembly 312-045-666 Receptacle Assembly

312-045-666 Front Panel Female Receptacle Kit for many Century made welders. For matching male plugs see part # 239-052-908. Replaces part # 312-028-100.

Price $74.50
312-066-666 Spindle 312-066-666 Spindle

Spindle assembly. 246-363-000 Knob, 081-055-666 Bolt Washer, 330-029-666 Spring, 312-193-000 Spindle. Spool adapter (312-110-666) is not included in this kit.

Discontinued
312-110-666 Adaptor, Spool 312-110-666 8" Spool Adapter

312-110-666 8" Spool Adapter. 8" spool adapter for Century made welders. Works with spindles 312-076-666 or 312-066-666. For 8" spool adapter for Lincoln Electric made welders see part # KH720

Price $15.04
334-203-000 Nozzle, 1/2 Id 334-203-000 Nozzle, 1/2 Id

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders.

Price $4.00
334-221-000 Trigger, Mig Gun 334-221-000 Trigger, Mig Gun

334-221-000 Trigger, Mig Gun

Price $39.50
334-227-000 Tube, Conductor Large Id 334-227-000 Tube, Conductor Large Id

334-227-000 Tube, Conductor Large Id

Price $61.55
334-228-000 Diffuser, Gas Mig Gun Large Id 334-228-000 Diffuser, Gas Mig Gun Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Discontinued see KP35-50
334-303-001 Regulator, Gas 7-35 Cfh 334-303-001 Regulator, Gas 7-35 Cfh

334-303-001 Regulator, Gas 7-35 Cfh

Price $210.89
412-465-666 Mig Gun Connector Block 412-465-666 Mig Gun Connector Block

Mig Gun Connector Block

Price $77.08
860-616-908 Century Composite Aluminum Drive Roller 43240 860-616-908 Century Composite Aluminum Drive Roller 43240

860-616-908 Century Composite Aluminum Drive Roller 43240. (860-908-002) For use with soft welding wire in all Mig welders made by Century Mfg Co.

Price $42.50
880-130-666 Drive Deck 880-130-666 Drive Deck with Arm

880-130-666 Drive Deck

Price $99.99
880-217-666 Circuit Board/Heatsink Assembly 880-217-666 Circuit Board/Heatsink Assembly

880-217-666 Circuit Board/Heatsink Assembly

Discontinued
880-219-666 Circuit Board Assembly, Speed Control 880-219-666 Circuit Board Assembly, Speed Control

880-219-666 Circuit Board Assembly, Speed Control

Price $99.99
KH525 Lincoln 300 Amp Ground Clamp KH525 Lincoln 300 Amp Ground Clamp

The Lincoln Electric 300 Amp Grounding Work Clamp is designed to complete electrical circuits to help promote a positive welding arc. This clamp features wide-grip jaws to help ensure a firm connection. Helps ground your work to be welded to a good electrical (ground) earth. Will take cable sizes up to #2/0. Cable (not included) connects directly to jaws. Ensures that the work cable makes a good electrical connection with the metal being welded. Jaws have a heavy duty spring that compresses the jaws tightly against the metal object. 1-year warranty.

Price $6.30
KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023 KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack)

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack) KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack)

KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack). Same as KP11-30, KP2039-2B1, M15523, Mig030.  Replaces Century and Marquette Part Numbers: 4310, 43100, 334-160-000, M15523, KP11-30 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH712 Lincoln .035" Tweco Style Mig Contact Tip (10 Pack)

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

Discontinued See KP11-45
KH727 Lincoln Nozzle, Spot Weld (each) KH727 Lincoln Nozzle, Spot Weld (each)

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS.

Price $15.75
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KP11-45 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)

KP11-45 Lincoln .045" Tweco Style Mig Contact Tip (Sold Each) Replaces KH713, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

Price $7.50
KP35-50 Diffuser, Gas Mig Gun Large Id KP35-50 Diffuser, Gas Mig Gun Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Price $15.99
KP45-40-15 Mig Gun Liner .035 - .045 15Ft Steel KP45-40-15 Mig Gun Liner .035 - .045 15Ft Steel

Mig Gun Liner .035 - .045 15Ft, For most Century Solar and small Lincoln welders. Replaces KP1937-1, 4331, 334-229, 334-373 Steel Liners. For Aluminum See KP1959-1 (4325, 334-230, 334-374) - Teflon Liner.

Price $25.56
S18475 Power Cord (248-226-000, 248-227-000, 4040) S18475 Power Cord (248-226-000, 248-227-000, 4040)

S18475 Power Cord for the following Century Welders & Lincoln Welders. 117-051, 117-052, 117-058, 117-059, 117-061, 117-064 and others. Does not have ears for retaining screws. Replaces 248-226-000, 248-227-000, 4040

Discontinued
   
 
117-051 WFWMDP Matco 110 amp MIG welder (phase-control)