Ingersoll-Rand 2161 3/4" Drive Air Impact Wrench Repair Parts

You are here: Home > Air Tool Repair Parts > Ingersoll-Rand Air Tool Repair Parts > Ingersoll-Rand 2161 3/4" Drive Air Impact Wrench Repair Parts

Ingersoll-Rand 2161 3/4" Drive Air Impact Wrench Repair Parts

IR 2161 Parts List
Item	Part Number	Part Description	IR Equivalent
		Motor Housing Assembly	2161-A40
1		Motor Housing	2161-B40
2	8208	Throttle Valve Seat	DG230-303
3	8585	Trigger Assembly	2161-A93
4	8104	Throttle Valve	2921-302
5	8803	Throttle Valve Spring	2161-51
6	8628	Air Strainer Screen	834-61
7	8179	Inlet Bushing Assembly	2161-A465A
8	8801	Inlet Bushing O-Ring	AF120-290
9	8804	Muffler Element	202-311
10	8802	Retaining Ring	2161-118
11	8805	Exhaust Deflector	2161-23
12	8586	Backcap Bolt (4)	2161-638
13	8588	Backcap Gasket	2161-739
		Backcap Assembly	2161-A102
14	8181	Backcap	2161-102
15	8182	Grease Fitting	R1-188
16	8183	Reverse Lever	2161-658
17	8184	Reverse Lever Snap Ring	2161-28
18	8185	Reverse Lever Spring	2161-278
19	8186	Motor Clamp Washer	2161-207
20	8038	Rear Rotor Bearing	4E-510
21	8825	Rear End Plate	2161-12
21A	8171	Locating Pin	2920-74
22	8429	Rotor	2910B-53
23	2157	Vane Packet (set of 6 Vanes)	2910-42-6
24	9469	Cylinder Dowel (2)	JC3350-538

25	9468	Cylinder	2161-3
26	8824	Front End Plate	2161-11
27	8037	Front Rotor Bearing	834-24
28		Reverse Valve O-Ring	023446
29		Reverse Valve	2161-329
30	9357	Hammer Frame Washer	2161-706
31	8415	Hammer Frame	2910-703A
32	9661/8694	Hammer	2161-724
33	8416	Hammer Pin (2)	2910-704
34	8589	Hammer Case Gasket	2161-36
35		Hammer Case Assembly
	8190	for 2161P and 2171P	2161-A727
		for 2161P-EU and 2171P-EU	2161-EU-A727
36	9433	Hammer Case Bushing	2161-641
37		Warning Label
		for 2161P and 2171P	WARNING-2-99
		for 2161P-EU and 2171P-EU	EU-99
38		Anvil
	8177/8192/8223	3/4” square drive	260-726
	8193	1” square drive	1711B-826
39		Socket Retainer
	8093/8284	for 3/4” square drive (2161P)	RR10034S
	8661/8627	for 1” square drive (2171P)	RR10015S
40		Hanger Kit	2161-366
41		Piped-Away Exhaust	2161-123

Century Tool & Equipment is in no way affiliated with the above manufacturers. The parts advertised for sale are not always genuine parts, but are parts made for or by Century Tool & Equipment. Reference to said numbers are for your convenience only. We reserve the right to substitute genuine parts in place of Century Tool & Equipment parts.

Sort By:

Page of 1

100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools

100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools

Discontinued See 105-1LB

1 lb. Can tool lube. Standard-duty impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

105-1Lb Ingersoll-Rand 1 Lb. Metallic Housing Impact Wrench Grease

105-1Lb Ingersoll-Rand 1 Lb. Metallic Housing Impact Wrench Grease

Price $27.80

105-1Lb Ingersoll-Rand 1 Lb. Metallic Housing Impact Wrench Grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube

105-4T Ingersoll-Rand Metallic Housing Grease 4 oz. Tube

Price $14.03

105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube. Metallic housing impact wrench grease. For use with GTH-1 grease gun.

105-4T-6 Ingersoll Rand Metallic Housing Grease Pack (6 Pack)

105-4T-6 Ingersoll-Rand Metallic Housing Grease Pack (6 Pack)

Price $61.05

Box of 6 4 oz. Tubes of IR Number 105 Grease. Metallic housing impact wrench grease. For use with GTH-1 grease gun. (6 Pack) 1.

105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing

105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing

Price $36.80

Ingersoll Rand Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease

115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease

Price $17.71

1 lb. Can tool lube. Composite housing impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

115-4T Ingersoll Rand Composite Grease 4 oz. Tube

115-4T Ingersoll-Rand Composite Grease 4 oz. Tube

Price $11.44

115-4T Ingersoll Rand Composite Grease 4 oz. Tube. Composite housing impact wrench grease. For use with GTH-1 or other grease gun.

115-4T-6 Ingersoll-Rand Composite Grease 4 oz. Tube (6 Pack)

115-4T-6 Ingersoll-Rand Composite Grease 4 oz. Tube (6 Pack)

Price $61.05

115-4T Ingersoll Rand Grease 4 oz. Tube. Composite housing impact wrench grease. For use with GTH-1 grease gun. (6 Pack)

115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit

115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit

Price $36.80

115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

2145QIMAX Ingersoll-Rand 3/4” Air Impact Wrench

2145QIMAX Ingersoll-Rand 3/4” Air Impact Wrench

Price $584.95

The new Ingersoll Rand 2145QiMAX 3/4" Drive Impactool™ delivers incredible performance and industrial-grade durability in an impact wrench. Plus, its efficient air motor reduces air consumption to save you money. Perfect for the most demanding applications, such as truck and bus service, construction and agricultural equipment maintenance, as well as the MRO market.

2157 2910-42 Rotor Vane Equivalent Sold Each

Price $2.64

2157 2910-42 Rotor Vane Equivalent - The original part 2910-42-6 (6 pack) is now gone and these are Sold Each.

2161-11 Front End Plate (Genuine Ingersoll-Rand Part)

2161-11 Ingersoll-Rand Front End Plate

Price $89.18

2161-11 Front End Plate (Genuine Ingersoll-Rand Part)

2161XP Ingersoll-Rand 3/4” Ultra-Duty Air Impact Wrench

2161XP Ingersoll-Rand 3/4” Ultra-Duty Air Impact Wrench

Price $764.10

The IR2161XP combines an enhanced twin hammer mechanism, ergonomic design, and a 360° swivel inlet with a high efficiency air motor to create the most powerful 3/4”Impact in the Automotive Industry.

8037 834-24 Bearing Equivalent

Price $7.28

8037 834-24 Bearing Equivalent

8038 4E-510 Bearing Equivalent

Price $4.98

8038 4E-510 Bearing Equivalent

8093 908B5-918 Socket Retainer 3/4" Equivalent

8093 908B5-918 Socket Retainer 3/4" Equivalent

Price $2.00

8093 908B5-918 Socket Retainer 3/4" Equivalent

8104 DG230-302/2921-302 Throttle Valve

Price $8.12

8104 DG230-302/2921-302 Throttle Valve

8171 2920-74 End Plate Dowel

Price $4.95

8171 2920-74 End Plate Dowel

8177 2161XP-626 Anvil

Price $127.25

8177 2161XP-626 Anvil

8179 2161-A465 Inlet Bushing (Course) Equivalent

8179 2161-A465 Inlet Bushing (Course) Equivalent

Price $21.45

8179 2161-A465 Inlet Bushing (Course) Equivalent

8181 2161-102 Backcap

Price $90.75

8181 2161-102 Backcap

8182 R1-188 Grease Fitting (Zerk fitting)

8182 R1-188 Grease Fitting

Price $3.55

8182 R1-188 Grease Fitting

8183 2161-658 Reversing Lever

Price $21.22

8183 2161-658 Reversing Lever

8184 2161-28 Reversing Lever Snap Ring

Price $4.00

8184 2161-28 Reversing Lever Snap Ring

8185 2161-278 Reversing Lever Spring

Price $4.00

8185 2161-278 Reversing Lever Spring

8186 2161-207 Motor Clamp Washer

Price $4.95

8186 2161-207 Motor Clamp Washer

8190 2161-A727 Hammer Case Assembly

Price $277.91

8190 2161-A727 Hammer Case Assembly

8192 2161XP-626-6 6" Extended Anvil

Price $237.60

8192 2161XP-626-6 6" Extended Anvil

8193 2080-726 1" Anvil

Price $167.59

8193 2080-726 1" Square Drive Anvil

8208 DG230-303/295-303 Throttle Valve Seat

8208 DG230-303/295-303 Throttle Valve Seat

Price $4.10

8208 DG230-303/295-303 Throttle Valve Seat

8223 1710-A626A 3/4" Drive Anvil

Price $95.70

8223 1710-A626A 3/4" Drive Anvil

8284 AF120-289 Socket Retainer O-ring 3/4"

8284 AF120-289 Socket Retainer O-ring 3/4"

Price $0.65

8284 AF120-289 Socket Retainer O-ring 3/4"

8415 2910-A703 Hammer Frame With Pins

Price $156.75

8415 2910-A703 Hammer Frame With Pins

8416 2910-704 Hammer Pin (Each)

Price $10.31

8416 2910-704 Hammer Pin (Each)

8429 2910B-53 Ingersoll-Rand Rotor

Price $249.95

8429 2910B-53 Ingersoll-Rand Rotor

8585 2161-A93 Trigger

Price $30.11

8585 2161-A93 Trigger

8586 2161-638 Backcap Bolt

Price $4.00

8586 2161-638 Backcap Bolt

8588 2161-739 Backcap Gasket

Price $4.13

8588 2161-739 Backcap Gasket

8589 2161-36 Hammer Case Gasket

Price $3.00

8589 2161-36 Hammer Case Gasket

8627 R4-210 Socket Retention O-ring 1" Drive

8627 R4-210 Socket Retention O-ring 1" Drive

Price $2.00

8627 R4-210 Socket Retention O-ring 1" Drive

8628 834-61 Stainless Steel Air Strainer

8628 834-61 Stainless Steel Air Strainer

Price $9.78

8628 834-61 Stainless Steel Air Strainer

8694 2925-724 Hammer

Price $92.40

8694 2925-724 Hammer

8801 AF120-290 Seal

Price $3.86

8801 AF120-290 Seal

8802 2161-118 Retaining Ring

Price $1.42

8802 2161-118 Retaining Ring

8803 2161-51 Spring

Price $2.38

8803 2161-51 Spring

8804 202-311 Silencer

Price $2.60

8804 202-311 Silencer

8805 2161-23 Deflector

Price $6.11

8805 2161-23 Deflector

8824 2161-11 Front end plate

Price $77.55

8824 2161-11 Front end plate

8825 2161-12 Rear end plate

Price $77.55

8825 2161-12 Rear end plate

9357 2161-706 Washer

Price $6.19

9357 2161-706 Washer

9433 2161-641 Bushing

Price $53.74

9433 2161-641 Bushing

9468 2161-3 Cylinder

Price $113.85

9468 2161-3 Cylinder

9469 JC3350-538 Roll pin

Price $2.88

9469 JC3350-538 Roll pin

9661 2161-724 Hammer

Price $118.80

9661 2161-724 Hammer

9934 2161-TK2 Ingersoll-Rand Tune Up Kit Equivalent

Price $59.40

2161-TK2 Tune-up Kit. Used On Ingersoll-Rand Models 2161, 2161XP. The kit contains: Rotor Vanes, Bearings, Socket Retainer, Throttle Valve, Reverse Lever Snap Ring, Reverse Lever Spring, Socket Retainer O-Ring, Throttle Valve Seat, Backcap Gasket, Hammer Case Gasket, Air Strainer, Retaining Ring, Spring, Silencer and O-Rings.

9976 2171-TK2 Ingersoll-Rand Tune Up Kit Equivalent

Price $59.40

9976 2161-TK2 Tune-up Kit. Used On Ingersoll-Rand Models 2161, 2161XP. The kit contains: Rotor Vanes, Bearings, Socket Retainer, Throttle Valve, Reverse Lever Snap Ring, Reverse Lever Spring, Socket Retainer O-Ring, Throttle Valve Seat, Backcap Gasket, Hammer Case Gasket, Air Strainer, Retaining Ring, Spring, Silencer and O-Rings.

GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease.

GTH-1 Ingersoll-Rand Grease Tube Head

Price $19.87

GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease.

R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings

R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings

Price $14.50

Ingersoll Rand R000A2-228 Push-type hand grease gun for flush-type fittings, holds up to 3 oz of grease.