40426 Robinair 1/4" Flare Access Solder Union 3/16" ID (6 Pack). The Robinair 40426 is a solder union type access fitting. 1/4" Male Flare x 3/16" I.D. Comes with 40535 Valve Core Remover.

40427 Robinair 1/4" Flare Access Solder Union 1/4" ID (6 Pack) for connecting to a 1/4" copper tube or 3/8" OD shoulder for soldering to a 3/8 ID fitting. Comes with 40535 Valve Core Remover.

Three pack of 1/4'' ODS x 1/4'' SAE valve cap and core x 3/8'' ODF forged brass braze tee. Valve machined to exceed the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Made in the USA.

Three pack of 5/16'' ODS x 1/4'' SAE valve cap and core x 3/8'' ODF forged brass braze tee. Valve machined to exceed the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Made in the USA.

Three pack of 3/8'' ODS x 1/4'' SAE valve cap and core x 3/8'' ODF forged brass braze tee. Valve machined to exceed the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Made in the USA.

Three pack of 1/2'' ODS x 1/4'' SAE valve cap and core x 3/8'' ODF forged brass braze tee. Valve machined to exceed the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Made in the USA.

Three pack of 1/4'' FE SAE Unions with flare nuts made in the USA. Valve core pre-torqued to ARI specifications. Add multiple ports with just one fitting. The flare connections offers a safe, simple installation without the need for brazing. All flare ends are tapped to receive access cores. One core and cap are packaged with each valve.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

Three pack of 1/4'' FE SAE tees with nuts. Add multiple ports with just one fitting. The flare connections offer a safe, simple installation without the need to brazing. All of the flare ends are tapped to receive access cores. One core and cap are packaged with each valve.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

1/4'' FE SAE swivel nut x access swivel cross with depressor made in the USA. Add multiple ports with just on fitting. The swivel flare connections offer a safe, simple installation without the need for brazing. All of the flare ends are tapped to receive access cores. One core and cap are packaged with each valve.

1/8'' MPT x 1/4'' SAE access fitting cross. Add multiple ports with just one fitting. The swivel flare connections offer a safe, simple installation without the need for brazing. All of the flare ends are tapped to receive access cores. One core and cap are packaged with each valve.

1/8'' MPT x 1/4'' SAE access fitting cross. Add multiple ports with just one fitting. The swivel flare connections offer a safe, simple installation without the need for brazing. All of the flare ends are tapped to receive access cores. One core and cap are packaged with each valve.

Three pack of 1/4'' ODS forged brass braze run access tees made in the USA. One core and cap are packaged with each valve.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material. 1/4 In Access Valve, Multi-Step 3/16 In, 1/4 In, 3/8 In Steps

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material. 1/4 In Access Valve, Multi-Step 3/16 In, 1/4 In, 3/8 In Steps

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

JB’s American made Brass SAE 45° flared tube fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.

1/2'' ACME thread union for 1/8'' NPTF made in the USA. Also used as a replacement ACME intake on JB Industry's older manifolds (M5 through M9 series).

1/2'' ACME thread union for 1/4'' NPFT made in the USA.

1/2'' ACME thread union for 3/8'' NPTF Union made in the USA.

AF-13455 JB Industries 1/2" Acme Male x 1/4" Female SAE Half Union. Made in the USA.

Six-pack solder access valves. 1/4'' Outer-Diameter and 3/16'' Inner-Diameter.

6 pack of multi-step solder access valves. 1/4'' SAE with valve core and cap. 3/8'' outer-diameter steps with 3/16'' inner-diameter.

One-hundred pack of multi-step solder access valves. 1/4'' SAE with valve core and cap. 3/8'' outer-diameter steps with 3/16'' inner-diameter.

Six-pack of multi-step solder access valves. 1/4'' SAE with valve core and cap. 5/16'' outer-diameter steps with 1/8'' inner-diameter.

One-hundred pack of multi-step solder access valves. 1/4'' SAE with valve core and cap. 5/16'' outer-diameter steps with 1/8'' inner-diameter.

Six pack of solder 1/4'' SAE access valves with 3/8" outer-diameter and 1/4'' inner-diameter.