1/4'' FE SAE swivel nut x access swivel cross with depressor by JB (A31520). Add multiple ports with just on fitting. The swivel flare connections offer a safe, simple installation without the need for brazing. All of the flare ends are tapped to receive access cores. One core and cap are packaged with each valve.

Highest Quality on the Market
Made using the highest level of brass consisting of 65% copper and 35% zinc. This gives our access fittings a high tensile strength while resisting corrosion. Machined to exceed the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Has generous counter bores to allow for the removal of the core if the flare becomes damaged. Pipe connection has internal braze cups for dip tube applications. All valves are equpped with cap and one valve core (braze type, loosely assembled. Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalies, and diluted mineral acids. Temperature range is from -40º to +250º degrees Fahrenheit.

Made in the USA
Machined by JBI in their Aurora, Illinois factory. Many import fittings use less quality brass with lower copper content and have a higher failure rate.

Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov