Robinair Power Cord Strain Releif Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord. Securely anchors, insulates, and protects cables at panel entry points.

10233 Robinair Inlet Filter Screen used on 34788NI, 34788, 34988 Recovery units & 567272 Robinair Tank Fill Hose.

High Side Docking Spud for all sidewinder style carts

112699 Robinair Oil Injector O-Ring

114692 Robinair Oil Bottle Cap for Oil Inject / Drain bottle, for 8 - 12 ounce oil injector bottles. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Don'T forget extra bottles (115642) for storing different oil types.

114693 Robinair Oil Bottle Cap (Less Liner With Holes) For Oil Injectors

DISCONTINUED - See replacement bottle 19103

12oz. Graduated Oil Drain - Oil Injector Bottle. 12oz Capacity in 1/2oz graduations and 360 Milliliters in 10 Milliliter graduations, for dispensing oil via an injector or for measuring oil removed during refrigerant recovery process. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Don forget extra caps (114692) for storing different oil types.

DISCONTINUED - See 19103 Bottle & Cap, and 112699 O-Ring


12oz. Graduated Oil Injector Bottle. 12oz Capacity in 1/2oz graduations and 360 Milliliters in 10 Milliliter graduations. For storing alternative oils for injection & for dispensing oil via an injector or for measuring oil removed during refrigerant recovery process. Durable plastic resists oils and dyes and most chemicals. Easily cleaned for long life. Includes cap & Level O-ring.

121829 Robinair 1/4-20 3/4" Pan Torx Screw (Each)

121829-PK5 Robinair 1/4-20 3/4" Pan Torx Cabinet Screw (5 Pack)

Robinair Velcro Refrigerant Tank Strap

Robinair Sidewinder Front Cabinet Panel. Fits all "Sidewinder" style carts. Installs in minutes with torx type screws (not included).

Power Cord 15' Euro Colors Power Cord 15' Supplies main power to the unit.

123785 Robinair Discharge Oil Coalescing Filter O-Ring

123786 Robinair Discharge Oil Filter Canister O-Ring

123787 Robinair Discharge Oil Coalescing Element separates oil from vapors in the discharge gas stream so it can be returned back to the compressor. This filter can become plugged when a compressor fails from a burn out or overheating due to waxes normally found in refrigerants. If you are replacing the compressor in your recovery unit, we suggest you also replace this filter. (Does not include sealing O-ring 123785 or canister seal 123786)

124023 Robinair Vacuum Pump Oil Fill Cap

Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time.

Robinair "High Vacuum Pump Oil" has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil’s purity, thinning it and reducing the pump’s ability to reach a deep vacuum.

Robinair’s "High Vacuum Pump Oil" is engineered to maintain maximum viscosity at high running temperatures and to improve cold weather starts. Laboratory tests prove that Robinair "High Vacuum Pump Oil" is more thermally stable in comparison to other leading brands, which means it resists breaking down due to heat for a longer period of time. Robinair "High Vacuum Pump Oil" has a lower moisture content than other oils, thanks to our special packaging and handling procedures. Moisture degrades the oil’s purity, thinning it and reducing the pump’s ability to reach a deep vacuum.

Robinair 10" Heavy Duty Foam Filled Pneumatic wheel with bearings for Sidewinder style Cart units. Replaces 19823. No more flat tires. Deep tread design for no slip traction even on wet or oily floors. A tubeless design with long air stems provide easy inflation and long life. Additional hardware for the unit is a Cotter Pin 1/8" Diameter X 1" Long & Flat Washer 1/2" I.D.

Robinair Calibration Verification Weight (1.18lbs.). Easily maintain your units accuracy with this handy calibration weight. This is a factory part, calibrated for accuracy.

Protect your investment with a heavy-duty vinyl dust cover. Features corded seams for durability; medium gray color with Cool-Tech logo.

Protect your investment with a heavy-duty vinyl dust cover. Features corded seams for durability; medium gray color with Cool-Tech logo.

17773 Robinair O-Ring For R-134a Quick Seal Fittings (2 Pack). Fits the internal face of the quickseal fitting on 134A hoses for recovery equipment, gauge set hoses and tank fill hoses with 1/2" ACME fittings.

QUICK SEAL O-Ring Set (6 Pack), O-Rings made of durable silicone rubber for resilience and long life.  fits all 1/4" Flare Quickseal Hose Ends.

Lowside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems. The quick-connect design has an integral safety sleeve, which protects against injury and refrigerant loss if the coupler is disconnected under pressure. The compact design easily fits into tight quarters, which is especially handy for retrofits. Six-ball couplers provide a more stable grip on the fitting than do couplers with four balls.

Highside Service Coupler 134a. Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems. The quick-connect design has an integral safety sleeve, which protects against injury and refrigerant loss if the coupler is disconnected under pressure. The compact design easily fits into tight quarters, which is especially handy for retrofits. Six-ball couplers provide a more stable grip on the fitting than do couplers with four balls.

Field service couplers connect to our special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems. The quick-connect design has an integral safety sleeve, which protects against injury and refrigerant loss if the coupler is disconnected under pressure. The compact design easily fits into tight quarters, which is especially handy for retrofits. Six-ball couplers provide a more stable grip on the fitting than do couplers with four balls.

12oz. Graduated Oil Drain Bottle including plastic cap

Replacement oil drain bottle used on the 34788NI, 34988NI, 34888HD and 17800C ACS machines.

Robinair 10" Heavy Duty Pneumatic wheel for Sidewinder style Cart units. Deep tread design for no slip traction even on wet or oily floors. A tubeless design with long air stems provide easy inflation and long life.

19867 Robinair Oil Injector Repair Kit. For all "Side-Winder" Style Recovery Units. Includes all necessary components to rebuild broken or missing oil injector bottle assemblies.

34722 Set of Red/Blue 9’ Enviro-Guard Hoses for Automotive R-134A. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. Clearly marked for R-134a. 740 psi working pressure, 3700 psi burst pressure.

The 34724 Robinair filter drier has been specifically formulated to trap acid and particulates and is formulated to remove water from the refrigerant. DO NOT accept look alike or knock off filters. You must change the filter-drier to assure adequate moisture and contaminant removal. Typically, you can recycle up to 300 pounds (136 kilograms) of R-134a or 600 pounds (272 kilograms) of refrigerant between filter changes (depending on your model). To help you know when you’ve reached that point, the unit displays the warning message prompting you to change the filter drier.

Magnetic Circuit Breaker provides protection of main electrical input. Single Pole 15 Amps 125-250 AC. Mounts Via Snap In Bezel. Terminal Connection 0.250 Spade terminals.

Oil Injector Steel Cap & Bulkhead Fitting used to attach the oil injector bottle to the unit, allowing user to inject oil into vehicle being serviced.

Oil Injector Cap used to attach the oil injector bottle to the unit, allowing user to inject oil into vehicle being serviced.

539024-2 Robinair Enclosure Swivel Top - Rear

Robinair Display Head SD Card Reader Cover. For 34288 / 34788 refrigerant recovery units.

Tank Temperature Probe senses refrigerant temperature for purge process.

Operating Manual for 34788 Recovery, Recycling, Recharging Unit. This a PDF Copy of the original factory manual shipped with your unit, Version "E". Available as a download PDF file when you check out.

539668 Robinair Suction Accumulator Canister O-Ring

Robinair Calibration Verification Weight for 34988 34788 and 34288 units (1.18lbs.). Easily maintain your units accuracy with this handy calibration weight. Ships with each new unit. This is a factory part, calibrated for accuracy.

541384 Robinair 9 Foot Enviro-Guard High Side Hose For 34788 34288 34134Z Units. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. Clearly marked for R-134a. 740 psi working pressure, 3700 psi burst pressure. Fittings are 7/16" Flare x 14MM Hose for Automotive R-134a.

541385 Robinair 9 Foot Enviro-Guard Low Side Hose For 34788 34288 34134Z Units. Enviro-Guard Hoses for Automotive R-134a. Enviro-Guard Hoses are constructed of special barrier material which prevent virtually any permeation of refrigerant, yet remains flexible. Meet all specifications for low permeation construction. Clearly marked for R-134a. 740 psi working pressure, 3700 psi burst pressure. Fittings are 7/16" Flare x 14MM Hose for Automotive R-134a.

DISCONTINUED - See Robinair 16214

Robinair Calibration Verification Weight (1.18lbs.). Easily maintain your units accuracy with this handy calibration weight. Ships with each new unit. This is a factory part, calibrated for accuracy.

557648 Robinair 34724 Filter O-Ring Small

557649 Robinair 34724 Filter O-Ring Large

DISCONTINUED

567272 Robinair Tank Fill Hose With Inline Filter provides protection of debris in virgin supply tanks from contaminating your machine. 1/2 ACME QuickSeal Fitting. Robinair Premium Refrigerant Charging Hoses are built for long life and dependability. A strong, six-sided crimp provides a reliable connection between the hose and the barb, even at maximum pressure. The coupler nuts are deeply knurled for quick finger-tightening. Enviro-Guard Hose Quick Seal Fittings prevent any refrigerant loss when disconnecting hoses from fittings eliminating harmful refrigerant burns.

Main Power Switch Controls the power between the power cord and the main board.

Caster 5" X 2" Swivel wheels mounted beneath unit for mobility.

Main Power Switch Controls the power between the power cord and the main board.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

The internal fittings used in the manifold block style machines use o-ring bubble fittings instead of flare fittings and require o-ring replacements to seal properly. (10 Pack)
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Caster 5" X 2" Swivel wheels mounted beneath unit for mobility.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Door Latch Kit Sidewinder Cabinets Device that contains spring, latch, retainer, and receptacle that holds door closed.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Low Side Gauge - Generic Used to monitor the suction pressure of the vehicle being serviced. 1/8" female pipe connection back tap. -30hg-0 To 0-125 PSI Range, 350 PSI Retard, PSI, Kpa, Bar Pressure Scales On Face. Includes Mounting Hardware, Loctite sealant, Instructions.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

High Side Gauge - Generic Used to monitor the discharge pressure of the vehicle being serviced. 1/8" female pipe connection back tap. 0-500 PSI Range, PSI, Kpa, Bar Pressure Scales On Face. Includes Mounting Hardware and Instructions.

NOTE: No longer works with the Robinair 34788 without modifications to the mounting bolts (new gauge mounting bolts are too short to reach mounting bracket)

Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Repair kit with Oil Injector Caps (20) and bulkhead fitting (10) Used to attach the oil injector bottle to the unit, allowing user to inject oil into vehicle being serviced. For individual Parts See 523148
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

3/8" High Pressure Tube 18" (each). Always use new tubing and 20006 ferrules when installing a new compressor.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA20006 Robinair 3/8" Ferrule And Nut (each)
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA20007 Robinair 1/4 Ferrule And Nut (each)
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Ferrule & Nut 1/8" (sold each)

Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

12 Volt Dc Discrete Solenoid
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

12 Volt DC Manifold Solenoid.
*If using on Models 34288 or EEAC324 units, Re-install the old coil with this new solenoid body.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

User interface for controlling refrigerant recovery, recycling, recharging, and other functions of the unit. Installation of this part requires a service centers assistance to install properly.

Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA20013 Robinair Relay Board
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

Vacuum Relief Check Valve
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA20019 Robinair Vacumaster Brass Oil Fill Plug & Seal

Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA20031 Robinair 1.5 CFM Vacuum Pump pulls moisture and air from the system to which the unit is attached.
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.

RA30047 Robinair Tank Temperature Probe
Robinair does not warrant any "RA" repair item not installed by an Authorized Service Center.