View CartMy Account / Order StatusHelp

Join our mailing list!



(Your shopping cart is empty)
You are here: Home > Battery Charger Parts > Schumacher Battery Charger Repair Parts > PSW-3060 Schumacher Battery Charger Parts List

PSW-3060 Schumacher Battery Charger Parts List


There are several versions of production on this unit, the diagram only shows the most current production unit.
Please review all product codes carefully before making a selection.
ITEM NO. PART NUMBER DESCRIPTION QTY.
5 1199004366 BRACKET. WHEEL CHARGER AXLE 2
6 0099000472 AXLE WITH HOLES 3/8' DIA GALV 1
7 0099000471 WHEEL 7 X 1.75 IN BRICK TRD 3'8 BORE BLK 2
8 5112405246 SCREW 10-24 x 5/8 SELF TAP 1
9 5181804304 SCREW. 8-18 x 1/2. TRUSS HEAD. TYPE AB 24
10 5199000406 SCREW 1/4-28x0.375 SL HHMS ETW SZP 2
11 5152006296 BOLT 1/4-20 x 3'4 HEX WASHER HEAD 2
12 5200000004 NUT 1/4-20 KEPS HEX ZINC PLATING 2
13 2100800010 RIVET POP .125 DIA. .203 LENGTH 5
14 2100800011 RIVET. POP. 3/16" X 5/16’ LONG 9
15 3599000412 HANDLE BLACK PRO SERIES 1
16 0099000094 TIMER 135 MINUTE 1
17 5100000005 SCREW M3x5.5 HHMS SZP 2
18 0499000058 ROTARY SWITCH 6 POSITION 1
19 0099000269 KNOB FOR 1/4’ SWITCH SHAFT 1
20 0099000270 KNOB. PT-BP20 ,25x.156 spring 1
21 4999001230 FAN W/ CONNECTOR SE-1555A 2
22 3799100016 FRONT. PANEL. SIS. PSW-3080-1 1
23 5399100146 METER. PRIME 0- 60A PLUS ES 1
24 3999000111 CIRCUIT BREAKER 120 AMP 32 VOLT 1
25 0093028740 XFORMER. ALUM. 4/30/60/300A. 6/12V. AL 1
26 5399200017 METER. LARGE PANEL 6-12 VOLT 1
27 0499000050 SWITCH ROCKER SPDT ON-ON 16 AMP 1
28 0499000086 TEST SWITCH DPDT 1
29 1799000237 HEATSINK. ALUMINUM. FOR DUAL FAN CONTROL 1
30 2299001651 ASSY H/S 4 HOLE 4PFD 4 LDS 2 PB 1
31 2299002070 ASSY DUAL FAN CONTROL 12V 1
32 3999000033 BREAKER. CIRCUIT. 50AMP. 12VOLT 1
33 5200000005 NUT 6-32 X 5/16 KEPS HEX ZINC PLATING 1
34 5199000156 SCREW 6-32 x 5/16 PAN HEAD STEEL 1
35 5200000007 NUT. 10-32. HEX STEEL KEPS. ZINC 2
39 0000000710 COTTER PIN 2
40 0000000711 ROD FIBERGLASS BLK .375’X 13.625" 1
41 0099000474 HUB. BLACK. COVER FOR 471 TIRE 2
45 0600000342 PARALLEL CONNECTOR SPLICE 2
48 0090026168 LINECORD. SJTOW 14-3 . 122" .25/.25/R 1
49 1199005112 BRACKET WHEEL CHARGER FOOT BLK 7" WHL 1
54 3799000656 LOAD TESTER BASE. SE-8050. PLATED 1
55 3799000666 LOAD TESTER COVER. SE-8050. PLATED 1
56 3899001362 NEGATIVE CABLE CLAMP ASSEMBLY RED 4 GAUGE 80" 1
57 3899001363 POSITIVE CABLE CLAMP ASSEMBLY RED 4 GAUGE 86" 1
58 5113204246 SCREW 10-32x0.5 SL HHST FLW SZP 2
59 5152006246 SCREW 1/4-20x0.75 SL HHST FLW SZP 2
60 5181803269 SCREW 8-18x0.375 HHST FLW SBZP 4
69 62940800177 JUMPER KIT. PSW-3060-1 1
Sort By:
Page of 1
0090026166 Schumacher 115 Volt Power Cord SJTOW 14-3, 122" .25/.25/R Termination
0090026166 Schumacher 115 Volt Power Cord
Price $19.25

115 Volt Power Cord SJTOW 14-3, 122" .25 Quick Disconnect /.25 Quick Disconnect / Ring Terminal connectors more info
0099000045 Schumacher Knob For Selector Switches on SE Series Chargers
0099000045 Schumacher Knob For Selector Switches on SE Series Chargers
Discontinued See 6094K89

This Knob is for selector switches on SE Series chargers only, there are separate knobs for selector switches and timers. Please check your part numbers carefully. more info
0099000062 Schumacher 6" CW Fan Blade
0099000062 Schumacher 6" CW Fan Blade
Discontinued See 316-009-000

0099000062 Schumacher 6" CW Fan Blade. more info
0099000063 Schumacher Fan Motor Open Frame 115 Volt
0099000063 Schumacher Fan Motor Open Frame 115 Volt
Discontinued See 216-041-666

Fan Motor Open Frame 115 Volt more info
0099000094 Schumacher 135 Minute Timer Mechanical with Hold
0099000094 Schumacher 135 Minute Timer Mechanical with Hold
Discontinued See TJ1-120MHB

Mechanically controls charging in timed Mode with manual hold mode. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept 1/4" spade terminals. more info
0099000096 Knob For Timer Switches 1/4" OD 3/4 "D" Shaft
0099000096 Knob For Timer Switches 1/4" OD 3/4 "D" Shaft
Discontinued See 6094K89

0099000096 Knob For Timer Switches 1/4" OD 3/4 "D" Shaft, there are separate knobs for selector switches and timers. Please check your part numbers carefully. more info
0099000178 Schumacher 3.5" CCW Fan Blade
0099000178 Schumacher 3.5" CCW Fan Blade
Price $9.19

0099000178 Schumacher 3.5" CCW Fan Blade more info
0099000269 Schumacher Knob For Timer Switches on PS Series Chargers
0099000269 Schumacher Knob For Timer Switches on PS Series Chargers
Price $4.62

This Knob is for timers on PS Series chargers only with a 1/2 Shaft, there are separate knobs for selector switches with a 3/4 shaft. Please check your part numbers carefully. more info
0099000270 Schumacher Knob For Selector Switches on PS Series Chargers
0099000270 Knob For Selector Switches on PS Series Chargers
Discontinued

This Knob is for selector switches with a 3/4 Shaft only, there are separate knobs for timers with a half shaft. Please check your part numbers carefully. more info
0099000471 Wheel 7" X 1.75" Brick Tread For 3/8 Axle.
0099000471 Schumacher Wheel 7" Plastic For 3/8 Axle
Discontinued

0099000471 Wheel 7" X 1.75" hub thickness x 1/4" offset brick tread for 3/8 Axle. See 2199700006 for Axle end cap. more info
0099000472 Schumacher Battery Charger Axle 15-5/8" 3/8 Dia. With Cotter Pin Holes
0099000472 Schumacher Battery Charger Axle 15-5/8" 3/8 Dia. With Cotter Pin Holes
Discontinued

0099000472 Schumacher Battery Charger Axle 15-5/8" 3/8 Dia. With Cotter Pin Holes more info
0099000474 Wheel Hub Cap For Wheel (Sold Each)
0099000474 Schumacher Wheel Hub Cap For Wheel (Sold Each)
Price $1.85

0099000474 Wheel Hub Cap For Wheel (Sold Each) more info
0499000050 Schumacher Rocker Switch 2 Position Switch 3 Terminal On-On
0499000050 Schumacher Rocker Switch 2 Position Switch 3 Terminal On-On
Discontinued See 246-176-666

0499000050 Schumacher Rocker Switch 2 Position Switch 3 Terminal On-On more info
0499000058 Schumacher 6 Position Rotary Selector Switch
0499000058 Schumacher 6 Position Rotary Selector Switch
Discontinued

6 Position Rotary Selector Switch, 7 wire new style. more info
0499000086 Schumacher 2 Position Switch
0499000086 Schumacher 2 Position Switch
Price $14.65

0499000086 Schumacher 2 Position Switch more info
1199005112 Schumacher Metal Foot
1199005112 Schumacher Metal Foot
Price $5.73

1199005112 Schumacher Foot, Metal, no hardware included. For 8" Wheeled units. more info
2199700006 Axle End Cap .375 Dia Axle (Pair)
2199700006 Schumacher Axle End Cap .375 Dia Axle (Pair)
Price $4.50

Axle End Cap Fits .375 (3/8") Diameter Axle, Sold as a Pair, Can be used on any 3/8" Axle to secure wheels. more info
2299001173 Raddital Rectifier Heatsink Kit
2299001173 Schumacher Heatsink Rectifier Assembly
Discontinued

2299001173 Raddital Rectifier Heatsink Kit, 300 Amp Cycle Duty, 70 Amp Continuous Duty, 8 Diode Ceramic Insulated Spider Design. more info
2299001378 Schumacher Battery Charger Wheels - Handle - Hardware Kit
2299001378 Schumacher Battery Charger Wheels - Handle - Hardware Kit
Discontinued

Discontinued See individual items 2299001378 Schumacher Battery Charger Wheels - Handle - Hardware Kit For Models PSW-2550, PSW-3060, PSW-61224. 3599000474 Handle, 0099000471 Wheels, 1199005112 Foot, 0099000472 Axle. more info
2299001587 Schumacher Heatsink Rectifier Assembly
2299001587 Schumacher Heatsink Rectifier Assembly
Discontinued See 2299001651

Heatsink Rectifier Assembly, requires no soldering to install. Includes 9" leads. Used on newer style units. Heavy Duty design for greater reliability. 1/4" spade terminal leads make installation a snap. more info
2299001651 Schumacher Heatsink Rectifier Assembly
2299001651 Schumacher Heatsink Rectifier Assembly
Discontinued

Heatsink Rectifier Assembly, requires no soldering to install. Includes 9" leads. Used on newer style units. Heavy Duty design for greater reliability. 1/4" spade terminal leads make installation a snap. *(fan speed control board sold separately) more info
2299002058 Schumacher 12 Volt Fan Motor 80mm X 80mm X 25mm
2299002058 Schumacher 12 Volt Fan Motor 80mm X 80mm X 25mm
Discontinued

Fan Motor provides cooling for the unit. 80mm X 80mm X 25mm 12volt DC quite design keeps noise to a minimum. If equipped, check your 2299002070 Schumacher 12volt DC Fan Speed Controller for possible fault as well. more info
2299002070 Schumacher 12 Volt DC Dual Fan Motor Control Board
2299002070 Schumacher 12 Volt DC Dual Fan Motor Control Board
Discontinued

12 Volt DC Dual Fan Motor Control Board. Mounts to the rectifier, fans plug into the board sockets. Requires removal of heat-sink from old board and riveted to this when installing. We recommend the purchase of 240000077 Silicone Heat Transfer Compound for proper heat transfer. more info
246-176-666 Switch 2 Position Rocker 16 Amp SPDT
246-176-666 Switch 2 Position Rocker 16 Amp SPDT
Price $12.46

SPDT Switch 16 amp Rating Snap-in mount no tools required to install, 1/4 Spade terminals. Original OEM Part Every Time more info
246-243-000 Circuit Breaker 12 Volt 50 Amp (578800-050)
246-243-000 Circuit Breaker 12 Volt 50 Amp (578800-050)
Price $4.50

246-243-000 Circuit Breaker 12 Volt 50 Amp (578800-050). Universal Breaker replaces many older unit parts. more info
316-009-000 Fan Blade 6" 4 Blade CW
316-009-000 Fan Blade 6" 4 Blade CW
Price $12.85

Fan Blade 6" 4 Blade CW. Same as 130007-001 Christie more info
3199100028A 75 Amp 400 Volt Positive Diode (Anode On Lead)
3199100028A Schumacher 75 Amp 400 Volt Positive Diode (Set Of 4)
Discontinued

3199100028A 75 Amp 400 Volt Positive Diode (Anode On Lead). Press in diode, used in a wide array of applications. Once installed in the heat-sink these may require soldering to install onto transformer taps.
Use caution when replacing diodes always verify polarity or damage to equipment or self may result. Century Tool & Equipment assumes no responsibility for loss, damage or personal injury due to the miss-application of any electrical component. Purchase of this item agrees to said statement. This item should only be installed by a qualified and experienced electrician.
more info
3599000412 Schumacher Battery Charger Handle Round Steel Black Flat sides
3599000412 Schumacher Battery Charger Handle Round Steel Black Flat sides
Discontinued

3599000412 Schumacher Battery Charger Handle Round Steel Black Flat sides more info
3899001359 Schumacher Positive Output Cable And Clamp Red 4 AWG
3899001359 Schumacher Positive Output Cable And Clamp Red 4 AWG
Discontinued

Positive Output Cable And Clamp Red 4 AWG Welding wire 84" long, parrot jaw clamp. more info
3899001360 Schumacher Negative Output Cable And Clamp Black 4 AWG
3899001360 Schumacher Negative Output Cable And Clamp Black 4 AWG
Discontinued

Output Cable And Clamp Black 4 AWG Welding wire 79" long, parrot jaw clamp. more info
3899001362 Schumacher Output Cable And Clamp Black 4 AWG Welding wire 80" long, parrot jaw clamp.
3899001362 Schumacher Negative Output Cable And Clamp Black 4 AWG
Discontinued

Output Cable And Clamp Black 4 AWG Welding wire 80" long, parrot jaw clamp. more info
3899001363 Schumacher Positive Output Cable And Clamp Red 4 AWG
3899001363 Schumacher Positive Output Cable And Clamp Red 4 AWG
Discontinued

3899001363 Schumacher Positive Output Cable And Clamp Red 4 AWG Welding wire 86" long, parrot jaw clamp. more info
3999000033 Schumacher 12 Volt 50 Amp Circuit Breaker
3999000033 Schumacher 12 Volt 50 Amp Circuit Breaker
Price $15.24

12 Volt 50 Amp Circuit Breaker more info
3999000111 Circuit Breaker DC 120 Amp 32 Volt
3999000111 Circuit Breaker DC 120 Amp 32 Volt
Discontinued

Circuit Breaker 32 Volt DC 120 Amp, Automatic Reset with Screw Terminal Tab Connectors, No Hardware Included. When ordering, it may be necessary to purchase a pair of the 5199000406 screws if replacing and older circuit breaker for retrofit. more info
413-002-000 Christie Automotive Battery Charger Axle 3/8 X 16" Threaded (118050-001)
413-002-000 Christie Automotive Battery Charger Axle 3/8 X 16" Threaded (118050-001)
Price $2.18

413-002-000 Christie Automotive Battery Charger Axle 3/8 X 16" Threaded (118050-001) more info
413-003-000 Christie Automotive Axle Nut Nylok 3/8 X 1 (515310-001)
413-003-000 Christie Automotive Axle Nut Nylok 3/8 X 1 (515310-001)
Price $0.25

413-003-000 Christie Automotive Axle Nut Nylok 3/8 X 1 (515310-001) more info
51-288 115 Volt Fan Motor With Fan Blade & Mount
51-288 115 Volt Fan Motor With Fan Blade & Mount
Price $55.50

51-288 115 Volt Fan Motor With Fan Blade & Mount. .195 diameter shaft. Your unit may not require the mount, in which case discard it. more info
5100000005 Timer Screw M3 X 5.5
5100000005 Timer Screw M3 X 5.5
Price $0.05

5100000005 Screw M3 X 5.5 For Original Timer more info
5399100146 Schumacher Ammeter Horizontal 0-60 Amp
5399100146 Schumacher Ammeter Horizontal 0-60 Amp
Discontinued See 5399100153

Ammeter Horizontal 0-60 AMP features easy snap-in installation, no tools required. Black Charge Rate face. 0-60 Amp range with start. Wire through induction pick-up for greater accuracy. more info
5399200017 Schumacher Volt Meter 6-12 Volt With Board
5399200017 Schumacher Volt Meter 6-12 Volt With Board
Price $24.65

Horizontal Panel Mount Volt Meter. 6-12 Volt Range, Battery Percent Of Charge Scale and Alternator Test Scale. Bad - Weak - Good. 4 Point Snap In Mount. 1/4" Spade Terminals. Circuit Board Installed. Can be used for older units as a universal replacement. Wiring: P1 -Common to breaker. P2 - To 6 Volt terminal on Switch. P3 - To 12 Volt terminal on Switch. more info
6094K89 Knob For Schumacher Battery Charger Selector Switches & Timers
6094K89 Knob For Battery Charger Selector Switches & Timers
Price $4.65

6094K89 Knob For Battery Charger Selector Switches & Timers. This Knob is for selector switches and timers, designed with 1/4" ID and a set screw for locking onto shaft. Suitable for all 1/4" shaft switches. Replaces Schumacher 0099000045 & 0099000096. more info
S29420-24 Century Battery Charger Clamp Holder
S29420-24 Century Battery Charger Clamp Holder
Price $14.85

S29420-24 Century Battery Charger Clamp Holder With Screws. Now you can stow your clamps in a safe place that doesn't get in the way, drag the ground or short out. Fits any round or flat bar battery charger handle. If using as a universal fit drilling two holes will be necessary. more info
TJ1-120MHB Universal Battery Charger 2 Hour Mechanical Timer
TJ1-120MHB Universal Battery Charger 2 Hour Mechanical Timer
Price $38.95
On Back Order (60 Days Out)

TJ1-120MB Universal Mechanical 2 Hour Timer With Finish Bell. Mechanically controls charging in timed Mode, has "Hold" for manual un-timed charging. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept 1/4" Quick Disconnect terminals. Includes mounting screws. Replaces many older mechanical timers. more info
   
 
Schumacher PSW-22, PSW-2035, PSW-2550, PSW-3060 & PSW-61224 Troubleshooting Guide
PROBLEM POSSIBLE CAUSE SOLUTION
No reading on the ammeter. Charger is not plugged in. Plug the charger into an AC outlet.
No power at the receptacle. Check for open fuse or circuit breaker supplying AC outlet.
Clips are not making a good connection to the battery. Check for poor connection to battery and frame. Make sure connection points are clean. Rock clips back and forth for a better connection.
Connections are reversed. Unplug the charger and reverse the clips.
Battery is defective (will not accept a charge). Have battery checked.
1.5, 2, 4 or 5 amp charge rate is being used. Ammeter may show no activity at the 1.5A, 2A, 4A or 5A charge rate.
Ammeter reading stays high. Battery is severely discharged. Continue charging battery for two more hours. If problem continues, have the battery checked.
Wrong battery voltage. Verify the voltage settings on the charger are correct.
Ammeter reads less than selected charge rate when charging a discharged battery. Extension cord is too long or wire gauge is too small. Use a shorter or heavier gauge extension cord.
Weak cell or sulfated plate in battery. A sulfated battery will eventually take a normal charge if left connected. If the battery will not take a charge, have it checked.
Battery is only partially discharged. Continue to charge the battery.
The charger is making an audible clicking sound. Circuit breaker is cycling. The settings may be wrong. Check the charger settings.
Battery is defective. Have the battery checked.
Shorted battery cables or clips. Circuit breaker cycles when current draw is too high. Check for shorted cables or clips and replace if necessary.
Severely discharged battery, but otherwise it is a good battery. The battery may not want to accept a charge due to a run-down state. Allow charging to continue until battery has a chance to recover sufficiently to take a charge. If more than 20 minutes, stop charging and have the battery checked.
Reverse connections at battery. Shut the charger off and correct the lead connections.
Charger makes a loud buzz or hum. Transformer laminations vibrate (buzz). No problem; this is a normal condition.
Shorted Diode Assembly or Output Rectifier Assembly (hum). Have charger checked by a qualified technician.
Short or no start cycle when cranking engine. Drawing more than the charger’s rated amps. Crank time varies with the amount of current drawn. If cranking draws more than the charger’s rated amps, crank time may be less than 3 seconds.
Failure to wait 3 minutes (180 seconds) between cranks. Wait 3 minutes of rest time before the next crank.
Clips are not making a good connection. Check for poor connection at battery and frame.
AC cord and/or extension cord is loose. Check power cord and extension cord for loose fitting plug.
No power at receptacle. Check for open fuse or circuit breaker supplying AC outlet.
The charger may be overheated. The thermal protector may have tripped and needs a little longer to reset. Make sure the charger vents are not blocked. Wait and try again.
Battery may be severely discharged. On a severely discharged battery, charge for 10 to 15 minutes in the manual charge rate to help assist in cranking.
Charger will not turn on when properly connected. AC outlet is dead. Check for open fuse or circuit breaker supplying AC outlet.
Poor electrical connection. Check power cord and extension cord for loose fitting plug.
The battery is connected and the charger is on, but is not charging. Clips are not making a good connection. Check for poor connection at battery and frame. Make sure connecting points are clean. Rock clips back and forth for a better connection.
Schumacher User Manual Link


When a charging problem arises, make certain that the battery is capable of accepting a normal charge. Double check all connections, AC outlet for a full 120-volts, charger clips for correct polarity and the quality of the connections from the cables to the clips and from the clips to the battery system. The clips must be clean.

When a battery is very cold, partially charged or sulfated, it will not draw the full rated amperes from the charger. It is both dangerous and damaging to a battery to force higher amperage into it than it can effectively use in recharging.

*Variations of models due to production changes and parts availability are not our responsibility *No refunds on electrical components *Service should be performed only by a qualified technician *Please read all supporting documentation and safety instructions
Century Tool & Equipment
4013 S. Old Hwy 94
St. Peters MO 63304
 About Us
 Let Us Repair It
 Privacy Policy
 Send Us Feedback