Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Welder Parts - MIG > 117-079-000 83170 Century 170GS mig 130 amp cold 220V

117-079-000 83170 Century 170GS mig 130 amp cold 220V



117-079 Replacement Parts List
Item No.
 		Customer #
 		Description
1
 880-052-666
 Heat & Wire Speed Controls with Potentiometers
2
 216-101-000
 Fan Motor
3
 410-924-XXX
 Front Panel
4
 541-057-000
 Strain Relief
5
 238-159-666
 Cable Assembly
6
 412-641-666
 Fan Guard
7
 246-107-000
 Knob
8
 246-424-666
 Switch
9
 238-593-000
 10' Mig Gun
(Used on units built after 01/01/2001, RED Trigger)

238-566-000
 10' Mig Gun
(Used on units built from 05/02/1999 to 12/31/2000, BLACK Trigger)

238-507-000
 10' Mig Gun
(Used on units built before 05/02/1999, RED Trigger,
Gas Diffuser has left-hand threads)
10
 410-869-XXX
 Control Panel
11
 880-416-888
 Transformer
12
 880-327-666
 Rectifier
13
 410-869-XXX
 Left Side Panel
14
 312-295-666
 Slide Latch with Clip
15
 246-414-000
 Terminal Block
16
 880-406-666
 Drive Motor with Gearbox

310-187-000
 Steel Drive Roller, 0.024 / 0.030 / 0.035

880-427-666
 Neoprene Drive Roller for Aluminum

S24355-6 Idle Roller (C609Z)

S24355-9 Wire Feed Tension Knob

S24355-10 Wire Feed Tension Spring

334-627-000 Inlet Guide Tube (cut to length 2.75")
17
 131-419-000 Tension Kit Less 312-110-666
18
 312-076-666 Spindle
19
 410-867-XXX Center Panel
20
 880-233-888,
880-041-888
 Dirve Transformer
21
 880-428-666
 Circuit Board with Heat Sink
22
 880-425-666
 Wire Harness
23
 213-041-000
 Capacitor, 98,000 mf, 40 Volt DC
24
 253-333-666
 Push in Union Fitting 5/32"
25
 248-330-666
 Power Cord, 12-3, 6' with 6-50 Plug
26
 512-215-666
 Bushing
27
 239-074-666
 Strain Relief
28
 245-145-666
 25 Ohm, 50 Watt Resistor
29
 312-296-666
 Handle
30
 410-864-XXX
 Right Side Panel
31
 216-055-666
 Triac Relay
32
 880-431-000
 Base
33
 246-428-000,
880-426-000
 Thermal Protector
34
 412-635-010
 Tank Bracket
34
 334-468-666
 Liner for Mig Gun with RED Trigger (Not Shown)
35
 334-476-666
 Liner for Mig Gun with BLACK Trigger (Not Shown)
36
 334-460-001
 Regulator (Not Shown)
37
 059-217-040
 5/32" Gas Hose (Not Shown)
38
 43090,
334-203-300,
KP2039-1B1,
M15522
 0.025 Contact Tip (Not Shown)
39
 43100,
334-160-300,
KP2039-2B1,
M15523
 0.030 Contact Tip (Not Shown)
40
 43110,
334-161-300,
KP2039-3B1,
M15524
 0.035 Contact Tip (Not Shown)
41
 43480,
334-203-300,
KP1942-1,
M15578
 Steel Welding Nozzle (Not Shown)
42
 312-110-666
 Wire Spool Adapter (Not Shown)
43
 41007
 Ground Clamp (Not Shown)
44
 KH600
 Helmet (Not Shown)
Sort By:
131-419-000 Century Spindle Tension Kit 131-419-000 Century Spindle Tension Kit

131-419-000 Century Spindle Tension Kit Hardware for the 312-076-666 spindle. Replaces part number 131-350-001.

Price $35.60
216-055-666 Relay Triac 40 Amp Replaces Marquette # 43700007 216-055-666 Relay Triac 40 Amp

Relay Triac 40 Amp Replaces Marquette # 43700007

Price $39.95
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031) 239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8” brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

Discontinued
246-041-666 Universal Selector Knob 246-041-666 Universal Selector Knob

246-041-666 Universal Selector Knob with set screw for controls with 1/4" Stem. Replaces all knobs with 1/4" diameter shaft. Fits 1/2 shaft and 3/4 style shaft stems.

Price $7.65
253-333-000 Fitting, Union 5/32 253-333-000 Fitting, Union 5/32

Gas Hose Fitting, For 5/32" hose  with Female Tube fittings on both ends. If you need gas hose see s26399-28. For regulators see 334-438-000 or 334-460-001.

Price $27.91
310-187-666 Drive Roller .024/.030/.035 310-187-666 Drive Roller .024/.030/.035

310-187-666 Drive Roller .024/.030/.035

Price $39.95
312-076-666 Spindle Arm for Century / Lincoln Welders 312-076-666 Spindle Arm for Century / Lincoln Welders

312-076-666 Spindle Arm for Century / Lincoln Welders. See part # 131-419-000 for spindle tension kit or the 312-110-666 spool adapter to fit a 8" spool of wire to the same spindle.

Discontinued See 9SS31898-1
312-110-666 Adaptor, Spool 312-110-666 8" Spool Adapter

312-110-666 8" Spool Adapter. 8" spool adapter for Century made welders. Works with spindles 312-076-666 or 312-066-666. For 8" spool adapter for Lincoln Electric made welders see part # KH720

Price $15.04
334-203-000 Nozzle, 1/2 Id 334-203-000 Nozzle, 1/2 Id (Each)

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders.

Price $8.00
334-228-000 Diffuser, Gas Mig Gun Large Id 334-228-000 Diffuser, Gas Mig Gun Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Discontinued see KP35-50
334-474-666 Tweco Trigger 2010-2095 334-474-666 Tweco Trigger 2010-2095

334-474-666 Tweco Trigger 2010-2095 For older 238-566 and 238-567 Mig guns.

Price $10.95
880-406-001 Gearmotor / Drive Assembly .024. Replaces part numbers 880-382-000, 880-382-001, 880-382-666, 880-406-000, 880-406-666 880-406-001 Gearmotor / Drive Assembly .024

Gearmotor / Drive Assembly  .024.  Replaces part numbers 880-382-000, 880-382-001, 880-382-666, 880-406-000, 880-406-666

Price $175.00
880-427-666 Roller, Composite Drive 880-427-666 Roller, Composite Drive

880-427-666 Neoprene Drive Roller For Aluminum. Used on drive base assembly 880-406-001, 880-382-000, 880-382-001, 880-382-666, 880-406-000, & 880-406-666.

Price $39.50
ED030631 Lincoln Electric Welding Wire .030 ER70S-6 SUPERARC L-56 Mig 2# Spool ED030631 Lincoln Electric Welding Wire .030 ER70S-6 SUPERARC L-56 Mig 2# Spool

Mild Steel MIG Wire (AWS ER70S-6). Lincoln’s premium copper coated MIG wire, Super Arc® L-56 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. Super Arc® L-56 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trade-marks of Super Arc® L-56. Shielding gases include argon/carbon dioxide blends, argon/ oxygen blends, straight carbon dioxide, and three or four-part gas blends.

Price $11.36
ED030632 Lincoln Electric Welding Wire .035 ER70S-6 SUPERARC L-56 Mig 2# Spool ED030632 Lincoln Electric Welding Wire .035 ER70S-6 SUPERARC L-56 Mig 2# Spool

Mild Steel MIG Wire (AWS ER70S-6). Lincoln’s premium copper coated MIG wire, Super Arc® L-56 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. Super Arc® L-56 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trade-marks of Super Arc® L-56. Shielding gases include argon/carbon dioxide blends, argon/ oxygen blends, straight carbon dioxide, and three or four-part gas blends.

Price $6.32
KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023 KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack)

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH712 Lincoln .035" Tweco Style Mig Contact Tip (10 Pack)

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

Price $13.95
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

Discontinued See KP11-45
KH726 Lincoln Nozzle, Flux-Cored (each) KH726 Lincoln Nozzle, Flux-Cored (each)

KH726 Lincoln Nozzle, Flux-Cored (each)

Price $5.10
KH727 Lincoln Nozzle, Spot Weld (each) KH727 Lincoln Nozzle, Spot Weld (each)

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS.

Discontinued
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KP11-45 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)

KP11-45 Lincoln .045" Tweco Style Mig Contact Tip (Sold Each) Replaces KH713, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

Price $7.50
   
 
117-079-000 83170 Century 170GS mig 130 amp cold 220V