Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Welder Parts - MIG > 117-067 2160 Solar 130 Amp MIG Welder

117-067 2160 Solar 130 Amp MIG Welder


ITEM PART NO DESCRIPTION
1 880-324-888 Transformer Assembly W/Thermal Breakers
1 880-326-666 Thermal Breaker Only
2 880-233-888 Drive Transformer Assembly
3 410-755-000 Base
4 880-323-888 Reactor Assembly
5 880-327-666 Dual Sided Rectifier Assembly
6 213-041-666 Capacitor
7 216-086-666 Fan Motor
8 411-072-666 Fan Motor Mounting Bracket
9 316-014-666 Fan Blade
10 248-282-666 Power Cord
11 541-019-000 Bushing
12 860-523-666 Resistor Assembly
13 246-212-666 Solendid
14 312-066-666 Bolt, Spindle, Spring, Washer, 8, Wing Nut
15 312-110-666 Molded Adapter Spool
16 069-043-666 Spring, Washer & Wing Nut
18 239-123-666 Inlet Guide Tube
19 4323 Drive Roller (.024, .030, .035)
19 4347 Drive Roller (.045)
20 880-111-666 Drive Tensioner Assembly
21 880-112-666 Drive Base W/Nut
22 246-326-000 Knob
23 412-465-666 Gun Connector
24 412-464-666 Copper Jumper
25 410-699-010 Drive Deck
26 880-227-666 Wire Gun Harness
27 410-757-010 Back Panel
28 216-089-666 Drive Motor
29 245-108-666 Potentiometer
30 412-134-100 Heatsink
31 216-055-666 Relay
32 410-807-070 Front Panel
33 246-140-666 Knob
34 4320 Complete Gun Assembly 10'
35 334-220-000 Nut
36 334-227-000 Gooseneck
37 334-219-000 Handle Cap
38 334-217-000 Insulation
39 334-228-000 Gas Diffuser
40 4309 Contact Tips, .024 (Pkg. 6)
40 4310 Contact Tips, ,030 (Pkg, 6)
40 4311 Contact Tips, .035 (Pkg. 6)
41 4348 Nozzle. Standard
41 4329 Nozzle, Spot
42 860-744-000 Trigger Harness
43 246-325-666 Switch
44 334-221-000 Trigger
45 312-045-666 (1) Receptacle Assembly
46 238-320-666 Polarity Jumper
47 880-113-666 Printed Circuit Board
48 410-323-110 Side Panel, Left (Not Shown
49 410-326-110 Side Panel, Right (Not Shown)
50 410-437-020 Hood (Not Shown)
51 334-285-666 Gas Regulator (Not Shown)
52 4213 Helmet (Not Shown)

Sort By:
071-014-908 Century Drive Roller Key Set 071-014-908 Century Drive Roller Key Set

Century Drive Roller Key Set. For use with Mig welders made by Century Mfg Co. Set includes both flat stock and woodruf keys for most welders, use when buying a new drive roller. Some older units had the key made into the drive roller, the new style drives rollers are slotted and require a woodruf key to lock them to the shaft.

Discontinued
131-211-100 Mig Gas Conversion Kit 2111 131-211-100 Mig Gas Conversion Kit 2111

131-211-100 Mig Gas Conversion Kit 2111. Includes fixed regulator, 24 Volt Solenoid, Gas hose and clamps, fittings for hose and welder.

Discontinued
131-211-200 Mig Gas Regulator & Hose Kit 131-211-200 Mig Gas Regulator & Hose Kit

131-211-200 Mig Gas Regulator & Hose Kit. Includes fixed regulator, Gas hose and clamps, fittings for hose and welder.

Discontinued
131-311-908 0-30 CFH 2 Stage Gas Conversion Kit (2112) 131-311-908 0-30 CFH 2 Stage Gas Conversion Kit (2112)

131-311-908 Gas conversion Kit (2112) Mig Gas Regulator & Hose Kit for Mig Welders. Includes adjustable regulator, 4' Gas hose and clamps, fittings for hose and welder. 0-30 CFH 2 Stage Gas regulator.

Price $149.95
216-055-666 Relay Triac 40 Amp Replaces Marquette # 43700007 216-055-666 Relay Triac 40 Amp

Relay Triac 40 Amp Replaces Marquette # 43700007

Price $107.82
216-082-000 Fan Motor With Leads 240 Volt 216-082-000 Fan Motor With Leads 240 Volt

216-082-000 Fan Motor With Leads 240 Volt .20 amps C.W. shaft end. Replaces some older models. 216-086-000, 216-086-010, 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 316-007-300 for Fan blade.

Price $42.95
216-086-666 Fan Motor W/ Leads 240 Volt 216-086-666 Fan Motor W/ Leads 240 Volt

216-086-666 Fan Motor W/ Leads 240 Volt .55 amp C.W. shaft end rotation. Replaces 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 216-082-000 as a possible replacement.

Discontinued
216-089-666 24 Volt Drive Motor 216-089-666 24 Volt Drive Motor

216-089-666 24 Volt Drive Motor.

Discontinued
Gun, Mig 130 Amp 10 Ft. The 238-155-000 replaces: 238-224-000, 238-224-100, 238-155-100, 123-155-500, 4320 238-155-000 Gun, Mig 130 Amp 10 Ft

Gun, Mig 130 Amp 10 Ft. The 238-155-000 replaces: 238-224-000, 238-224-100, 238-155-100, 123-155-500, 4320

Discontinued
239-052-908 Lincoln Cable Connector, Set #4-#1 (4031) 239-052-908 Lincoln Cable Connector, Set #4-#1 (4031)

Lincoln Cable Conncetor Set. Precision machined from special contour extended brass. Equipped with heat and oil resistance molded covers. Easily twists into position. Model 239-052-908. One pair 3/8 brass male plugs. Fits most Century Arc and MIG welders. For cable size #4-#1

Price $89.50
245-108-666 Potentiometer 10k Ohm 245-108-666 Potentiometer 10k Ohm

245-108-666 Potentiometer 10k Ohm

Discontinued See 246-260-000
246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008. 246-086-666 Century Solenoid 24 Volt Air Service

246-086-666 Century Solenoid 24 Volt Air Service, replaces 246-212-666 and 43700008, B7161370.

Price $119.85
246-107-666 Century Knob 1-1/2" Round 1/4" Stem Diameter Black Plastic 246-107-666 Century Knob 1-1/2" Round 1/4" Stem Diameter Black Plastic

246-107-666 Century Knob 1-1/2" Round 1/4" Stem Diameter Black Plastic. Replaces 246-140-666

Price $12.85
246-120-666  Potentiometer 5k Ohm 1/4 watt 246-120-666 Potentiometer 5k Ohm 1/4 watt

246-120-666  Potentiometer 5k Ohm 1/4 watt

Discontinued
246-212-666 Century Solenoid 24 Volt Air Service 246-212-666 Century Solenoid 24 Volt Air Service

246-212-666 Century Solenoid 24 Volt Air Service

Discontinued See 246-086-666
246-260-000 Potentiometer 10K Ohm 246-260-000 Potentiometer 10K Ohm

246-260-000 Potentiometer 10K Ohm

Discontinued
246-326-666 Century Gun Connector Knob 246-326-666 Century Gun Connector Knob

246-326-666 Century Gun Connector Knob

Price $11.95
310-119-500 Century Steel Drive Roller .030 .035 .045 4341 310-119-500 Century Steel Drive Roller .030 .035 .045 4341

310-119-500 Century Steel Drive Roller .030 .035 .045 4341. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Discontinued
310-122-500 Century Steel Drive Roller .024 .030 .035 4323 310-122-500 Century Steel Drive Roller .024 .030 .035 4323

Century Drive Roller .024 .030 .035 in Part number 4323. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key.

Price $23.70
310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. 310-154-500 Century Steel Serrated Drive Roller .045 4347

310-154-500 Century Steel Serrated Drive Roller .045 4347. For use with Mig welders made by Century Mfg Co. Does Not Include "D" Or "Square" Stock Key.

Discontinued See 310-119-500
312-045-666 Receptacle Assembly 312-045-666 Receptacle Assembly

312-045-666 Front Panel Female Receptacle Kit for many Century made welders. For matching male plugs see part # 239-052-908. Replaces part # 312-028-100.

Price $74.50
312-066-666 Spindle 312-066-666 Spindle

Spindle assembly. 246-363-000 Knob, 081-055-666 Bolt Washer, 330-029-666 Spring, 312-193-000 Spindle. Spool adapter (312-110-666) is not included in this kit.

Discontinued
312-110-666 Adaptor, Spool 312-110-666 8" Spool Adapter

312-110-666 8" Spool Adapter. 8" spool adapter for Century made welders. Works with spindles 312-076-666 or 312-066-666. For 8" spool adapter for Lincoln Electric made welders see part # KH720

Price $15.04
316-014-000 Fan Blade 6" 4 Blade CW 316-014-000 Fan Blade 6" 4 Blade CW

316-014-000 Fan Blade 6" 4 Blade CW

Price $18.60
334-203-000 Nozzle, 1/2 Id 334-203-000 Nozzle, 1/2 Id

Tweco Style MIG Welding Nozzle, Recessed. (1 pack). Replaces Century/Lincoln part numbers: 4348, 43480, 334-203-100, 334-203-500, 334-203-908, M15578, Magnum 100, KP21T-50, 21-50. Works with most Century and Lincoln Electric welders.

Price $16.54
334-219-000 Handle Cap TWECO #35-80A-1 334-219-000 Handle Cap TWECO #35-80A-1

334-219-000 Handle Cap TWECO #35-80A-1

Price $17.50
334-221-000 Trigger, Mig Gun 334-221-000 Trigger, Mig Gun

334-221-000 Trigger, Mig Gun

Price $56.50
334-227-000 Tube, Conductor Large Id 334-227-000 Tube, Conductor Large Id

334-227-000 Tube, Conductor Large Id

Price $61.55
334-228-000 Diffuser, Gas Mig Gun Large Id 334-228-000 Diffuser, Gas Mig Gun Large Id

Diffuser, Gas Mig Gun Large Id. Gas diffuser for the following MIG guns: 4320, 238-155-000, 238-155-100, 238-155-500, 238-224-000, 238-224-100.

Price $40.33
334-285-666 Regulator, Gas 7-20 Cfh 334-285-666 Regulator, Gas 7-20 Cfh

Regulator, Gas 7-20 Cfh. Discontinued See KH738, When using the hose from the KH738, simply cut one end off the hose to attach to the barb fitting on the unit.

Discontinued See KH738
412-465-666 Mig Gun Connector Block 412-465-666 Mig Gun Connector Block

Mig Gun Connector Block

Price $77.08
541-278-666 Century Drive Roller .024 .030 .035 541-278-666 Century Drive Roller .024 .030 .035 # 4323

Century Drive Roller .024 .030 .035 in. For use with steel welding wire in all Mig welders made by Century Mfg Co. Does Not Include key, 071-014-908 Century Drive Roller Key Set.

Discontinued See 310-122-500
860-616-908 Century Composite Aluminum Drive Roller 43240 860-616-908 Century Composite Aluminum Drive Roller 43240

860-616-908 Century Composite Aluminum Drive Roller 43240. (860-908-002) For use with soft welding wire in all Mig welders made by Century Mfg Co.

Price $42.50
880-113-666 Circuit Board Assembly, Phase Control 880-113-666 Circuit Board Assembly, Phase Control

Circuit Board Assembly, Phase Control. Replaces the 860-934-000, 880-113-000, 880-154-000, 880-292, 880-292-003, 880-292-008 and others.

Discontinued
880-130-666 Drive Deck 880-130-666 Drive Deck with Arm

880-130-666 Drive Deck

Price $170.36
880-327-666 Century 24 Diode Rectifier Assembly 880-327-666 Century 24 Diode Rectifier Assembly

880-327-666 Century 24 Diode Rectifier Assembly

Price $128.25
KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023 KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack)

KH710 Lincoln .025" Tweco Style Contact Tip (10 Pack). Same as KP11-25, KP2039-1B1, M15522, Mig023, Replaces Century and Marquette Part Numbers:4309, 43090, 334-159-000, 334-159-300, 334-159-908, M15522, KP11-25 & Others. Used on Century made welders model 117-001 to 117-090.

Price $10.10
KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack) KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack)

KH711 Lincoln .030" Tweco Style Mig Contact Tip (10 Pack). Same as KP11-30, KP2039-2B1, M15523, Mig030.  Replaces Century and Marquette Part Numbers: 4310, 43100, 334-160-000, M15523, KP11-30 & Others. Used on Century made welders model 117-001 to 117-090.

Price $10.10
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH712 Lincoln .035" Tweco Style Mig Contact Tip (10 Pack)

KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. Replaces Century and Marquette Part Numbers: 4311, 43110, 334-161-000, M15524, KP11-35 & Others. Used on Century made welders model 117-001 to 117-090.

Price $10.10
KH712 Lincoln .035" Tweco Style Contact Tip (10 Pack) Replaces KH712, KP11-35, KP2039-3B1, M15524, Mig035. KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack)

KH713 Lincoln .045" Tweco Style Mig Contact Tip (10 Pack) Replaces KP11-45, KP2039-4B1, M57242, Mig045, 43990, 334-202-300

Discontinued See KP11-45
KH727 Lincoln Nozzle, Spot Weld (each) KH727 Lincoln Nozzle, Spot Weld (each)

KH727 Lincoln Nozzle, Spot Weld (each). Replaces Century Part Numbers: 4329, 43290. 334-211-000, 334-211-100, 334-211-300, 334-211-500, 334-211-908, KP1956-1, KP21-62-FAS.

Price $15.75
KH738 Lincoln Electric Mig Shielding Gas Kit KH738 Lincoln Electric Mig Shielding Gas Kit

The KH738 Lincoln Electric Mig Shielding Gas Kit is required when changing from Flux-Cored to MIG welding. Kit includes: Harris made 601-AR60-580 regulator and 10 ft. of 3/16 hose Assembly. Kit will work in place of 334-285-000, 334-285-666, 334-286-000, 334-286-666, 334-303-001, KH738, 3000290, S28505, K586-1, 3000290, 3000322, KH738. For Century made welders, remove one of the brass fittings off the hose. The hose will then slide onto the hose barb.

Price $74.95
KP45-40-15 Mig Gun Liner .035 - .045 15Ft Steel KP45-40-15 Mig Gun Liner .035 - .045 15Ft Steel

Mig Gun Liner .035 - .045 15Ft, For most Century Solar and small Lincoln welders. Replaces KP1937-1, 4331, 334-229, 334-373 Steel Liners. For Aluminum See KP1959-1 (4325, 334-230, 334-374) - Teflon Liner.

Price $25.56
S27985-4 Lincoln Electric Drive Motor S27985-4 Lincoln Electric Drive Motor

Lincoln Electric S27985-4 Wire Drive Assembly - Replaces older obsolete Century Units as well.

Price $192.00
   
 
117-067 2160 Solar 130 amp MIG welder