|
|
|
|
|
|
021-80160-00 RTI Knob For Top Of IC (780/2000)
|
|
|
021-80160-00 RTI KNOB FOR TOP OF IC (780/2000)
|
|
|
|
|
|
|
|
|
|
|
022-80024-00 RTI Switch Diff Press R-134A
|
|
|
022-80024-00 RTI SWITCH DIFF PRESS R-134A
|
|
|
|
|
|
|
|
|
|
|
022-80025-01 RTI Check Valve 1/4 FPT X 1/4 FPT (For A/C Use Only)
|
|
|
Check valve with 1/4 FTP x 1/4 FPT. For A/C use only.
|
|
|
|
|
|
|
|
|
|
|
023-80039-01 RTI Fitting Bulkhead - 1/4 MFL X 1/8 MPT (R-12)
|
|
|
Bulkhead fitting for R-12 - 1/4 MFL x 1/8 MPT
|
|
|
|
|
|
|
|
|
|
023-80095-00 Mahle Red High Side Service Coupler All R134A Machines & Gauge Sets
|
|
|
023-80095-00 Mahle Red High Side Service Coupler All R134A Machines & Gauge Sets. Highside Service Coupler 134a. Field service couplers connect to hoses to allow access to service ports on automotive R-134a A/C systems.
|
|
|
|
|
|
|
|
|
|
023-80096-00 Mahle Blue Low Side Service Coupler All R134A Machines & Gauge Sets
|
|
|
023-80096-00 Mahle Blue Low Side Service Coupler All R134A Machines & Gauge Sets. Lowside Service Coupler 134a. Field service couplers connect to hoses to allow access to service ports on automotive R-134a A/C systems.
|
|
|
|
|
|
|
|
|
|
023-80122-01 RTI Cap Access Fitting - Plastic With Strap (R-12)
|
|
|
1/4 Flare Seal Cap with anchor retention strap prevents loss when not in use.
|
|
|
|
|
|
|
|
|
|
023-80134-00 RTI Cap Access Fitting - Plastic With Strap (R-134a)
|
|
|
Plastic access fitting cap with plastic strap to keep it secured. For R-134a
|
|
|
|
|
|
|
|
|
|
|
023-80138-00 RTI Fitting Bulkhead - 1/2 ACME Male X 1/8 MPT (R-134a)
|
|
|
Bulkhead fitting for R-134a - 1/2ACME Male x 1/8 MPT
|
|
|
|
|
|
|
|
|
|
|
024-80035-00 RTI Switch Rocker Purge (Momentary On)
|
|
|
024-80035-00 RTI SWITCH ROCKER PURGE (MOMENTARY ON)
|
|
|
|
|
|
|
|
|
|
|
024-80037-00 RTI Contactor 20 Amp Telemecanique 120V
|
|
|
20-amp 120-volt contactor by Telemecanique
|
|
|
|
|
|
|
|
|
|
|
024-80040-00 RTI Switch Rocker SPDT (Amber Light)
|
|
|
024-80040-00 RTI Switch Rocker SPDT (Amber Light)
|
|
|
|
|
|
|
|
|
|
024-80059-00 RTI Keypad Membrane (RHS780-RHS2780)
|
|
|
024-80059-00 RTI KEYPAD MEMBRANE (RHS780-RHS2780)
|
|
|
|
|
|
|
|
|
|
|
024-80060-01 RTI Circuit Board 120V Internal Steel Cylinder Units
|
|
Discontinued See 360-82265-00
|
|
|
024-80060-01 RTI Circuit Board 120V Internal Steel Cylinder Units
|
|
|
|
|
|
|
|
|
|
025-80127-00 RTI Bulb Clear Incand. Bayonet Base 110V
|
|
|
Clear incandescent 110 volt bulb with a bayonet base.
|
|
|
|
|
|
|
|
|
|
|
025-80128-00 RTI Holder Lamp With Clear Bulb (120 Volt)
|
|
|
RTI Holder Lamp With Clear Bulb (120 Volt) Discontinued. You must replace the entire lamp assembly. See 025-80424-00 New Style Base & 025-80421-00 (Red Lens), 025-80422-00 (Green Lens), 025-80423-00 (Amber Lens).
|
|
|
|
|
|
|
|
|
|
|
025-80191-00 RTI Lens Assy Yellow
|
|
|
025-80191-00 RTI LENS ASSY YELLOW
|
|
|
|
|
|
|
|
|
|
|
026-80065-02 RTI Gauge Assy (Low Side) Units Built After 7/1/00 *Except 780 And 2780
|
|
|
360-80065-02 RTI Lowside Compound Gauge -30" to 120 PSI 2.5" diameter, for units made 08/00 & Later *EXCEPT 780 AND 2780
|
|
|
|
|
|
|
|
|
|
026-80069-00 Mahle Recycling Filter Drier (Short)
|
|
|
RTI/Mahle Filters need to be replaced every 25 hours of use in order to properly remove acids and moisture that can damage compressors and contaminate oil in the vehicle. DO NOT accept look alike or knock off filters. You should change the filter-drier seasonally to assure adequate moisture and contaminant removal.
|
|
|
|
|
|
|
|
|
|
|
026-80071-03 RTI Gauge 0-500 PSIG 1/4 MFL (Rear) 3.5" 780'S And 2780'S
|
|
|
026-80071-03 RTI Highside Pressure Gauge 0 to 500 PSI 3.5" diameter with 1/4 Male Flare fitting (Rear), for units made 08/00 & Later 780 AND 2780 Units
|
|
|
|
|
|
|
|
|
|
026-80077-00 Mahle Recycling Filter Drier (Long)
|
|
|
RTI/Mahle Filters need to be replaced every 25 hours of use in order to properly remove acids and moisture that can damage compressors and contaminate oil in the vehicle. DO NOT accept look alike or knock off filters. You should change the filter-drier seasonally to assure adequate moisture and contaminant removal.
|
|
|
|
|
|
|
|
|
|
026-80116-02 RTI Oil Charge Bottle Assy. 8 Oz. Capacity 1/2 In. ACME Female
|
|
|
The 026-80116-02 oil injection assembly for R12 or R134a works on most any application. 1/4 flare female on one side and 1/4 flare male on the other. Adapter included to convert to 1/2 ACME for R134a applications.
|
|
|
|
|
|
|
|
|
|
026-80120-00 RTI Gauge Lens Cover 2.5"
|
|
|
026-80120-00 RTI GAUGE LENS COVER 2.5"
|
|
|
|
|
|
|
|
|
|
|
026-80120-02 RTI Gauge Lens Cover 3.5" 780, 2780
|
|
|
026-80120-02 RTI GAUGE LENS COVER 3.5" 780, 2780
|
|
|
|
|
|
|
|
|
|
|
026-80193-00 RTI Pump Vacuum 3 CFM J/B 110V
|
|
|
026-80193-00 RTI PUMP VACUUM 3 CFM J/B 110V
|
|
|
|
|
|
|
|
|
|
026-80207-00 RTI Oil Drain Assembly
|
|
Discontinued See 360-82928-00
|
|
|
RTIs 360-82928-00 8 oz. oil drain assembly can be used with many popular machines that are equipped with a 1/4 in. flare oil drain port. The precision needle valve lets the operator control the flow. The bottle graduations allow for an accurate measurement of removed oil.
|
|
|
|
|
|
|
|
|
|
026-80207-01 Mahle Oil Drain Bottle
|
|
Discontinued See 026-80673-00
|
|
|
026-80207-01 Mahle Oil Drain Bottle
|
|
|
|
|
|
|
|
|
|
026-80208-00 Mahle Oil Injector Assembly
|
|
Discontinued See 360-82929-00
|
|
|
The 026-80208-00 8 oz. oil injection assembly can be used with many popular machines that are equipped with a 1/4 in. flare oil injection port. The precision needle valve and the graduations on the bottle allow for accurate oil dispensing.
|
|
|
|
|
|
|
|
|
|
026-80208-01 RTI Bottle Only Oil Charge
|
|
Discontinued See 026-80672-00
|
|
|
The 026-80208-01 8 oz. oil injection assembly can be used with many popular machines that are equipped with a 1/4 in. flare oil injection port. The precision needle valve and the graduations on the bottle allow for accurate oil dispensing.
|
|
|
|
|
|
|
|
|
|
026-80240-00 RTI In-Line Filter 1/4 In. MFL X 1/8 In. MPT
|
|
|
RTI Inlet filter for R-12 units comes assembled ready to install. Constructed of solid brass for durability and long life. Screen mesh element is replaceable. See 360-81618-00 10 Pack Replacement Elements.
|
|
|
|
|
|
|
|
|
|
|
026-80241-00 RTI Inlet Filter R-134A 1/2 ACME X 1/8 MPT
|
|
|
RTI Inlet filter for R-134a units comes assembled ready to install. Constructed of solid brass for durability and long life. Screen mesh element is replaceable. See 3608161800 10 Pack Element. See 360-81618-00 10 Pack Replacement Elements.
|
|
|
|
|
|
|
|
|
|
026-80672-00 RTI Bottle Only Oil Inject
|
|
|
026-80672-00 RTI Bottle Only Oil Inject
|
|
|
|
|
|
|
|
|
|
026-80673-00 RTI Bottle Only Oil Drain
|
|
|
026-80673-00 RTI Bottle Only Oil Drain
|
|
|
|
|
|
|
|
|
|
028-80016-00 RTI 3" Diameter Swivel Caster With Brake (Rubber Tires Gray)
|
|
|
3" Diameter Swivel caster with brake, rubber tires (gray), 1/2" diameter 13 tpi X 1" long mounting post
|
|
|
|
|
|
|
|
|
|
028-80032-00 RTI Caster Swivel 3" With Brake
|
|
|
028-80032-00 RTI Caster Swivel 3" With Brake. 3/8" diameter 16 tpi X 1" long mounting post.
|
|
|
|
|
|
|
|
|
|
028-80035-02 Mahle 11' High Side 134A System Hose RHS730 & RHS780 Units
|
|
|
The 028-80035-02 is a special Mahle Low Permeability 11 ft. long red high side service hose. Works on all R134a machines and gauge sets. (1/2 in. ACME x 14 mm) For RHS730 & RHS780 Units
|
|
|
|
|
|
|
|
|
|
028-80035-03 Mahle 20' High Side 134A System Hose RHS & ACX Series Units
|
|
|
The 028-80035-03 is a special Mahle Low Permeability 20 ft. long red high side service hose. Works on all R134a machines and gauge sets. (1/2 in. ACME x 14 mm) For RHS & ACX Series Units
|
|
|
|
|
|
|
|
|
|
028-80036-02 Mahle 11' Low Side 134A System Hose RHS730 & RHS780 Units
|
|
|
The 028-80036-02 is a special Mahle Low Permeability 11 ft. long red high side service hose. Works on all R134a machines and gauge sets. (1/2 in. ACME x 14 mm) For RHS730 & RHS780 Units
|
|
|
|
|
|
|
|
|
|
028-80036-03 Mahle 20' Low Side 134A System Hose RHS & ACX Series Units
|
|
|
The 028-80036-03 is a special Mahle Low Permeability 20 ft. long red high side service hose. Works on all R134a machines and gauge sets. (1/2 in. ACME x 14 mm) For RHS & ACX Series Units
|
|
|
|
|
|
|
|
|
|
|
031-80000-00 RTI Load Cell 35 Kg Units Produced 2002 & Ealier
|
|
|
031-80000-00 RTI Load Cell 35 Kg Units Produced 2002 & Ealier
|
|
|
|
|
|
|
|
|
|
|
360-80076-00 RTI Gauge Assy 30 In-Hg - 120 PSIG (Low Side)
|
|
|
RTI Lowside Compound Gauge -30" to 120 PSI 2.5" diameter, for units made Before 07/00
|
|
|
|
|
|
|
|
|
|
|
360-80171-00 RTI Oil Compressor 3GS 1 Quart (For Americold Compressors)
|
|
|
360-80171-00 RTI OIL COMPRESSOR 3GS 1 QUART (FOR AMERICOLD COMPRESSORS)
|
|
|
|
|
|
|
|
|
|
|
360-80226-01 RTI 40 In. Yellow Hose R12 Order With 210720 Anti-Bb For Quick Fill Setup
|
|
|
360-80226-01 RTI 40 in. Yellow Hose R12 Order With 210720 Anti-BB for Quick Fill Setup
|
|
|
|
|
|
|
|
|
|
|
360-80251-01 RTI Compressor 110V - With Adapter Tubes Universal Applications Fits All Models
|
|
|
110-volt compressor for all Air Conditioning Service units with Americold compressors. This compressor can be used for any unit to date, Universal Applications, includes adapter tubing.
|
|
|
|
|
|
|
|
|
|
|
360-80260-00 RTI Gauge Assy 0-500 PSIG (High Side)
|
|
|
360-80260-00 RTI Highside Pressure Gauge 0 to 500 PSI 2.5" diameter with 1/4 Male Flare fitting (Rear), for units made 07/00 & Earlier 780 AND 2780 Units
|
|
|
|
|
|
|
|
|
|
360-80471-00 RTI System Hose Red R12 11 Ft. W/Ball Valve As Comes On Most Machines
|
|
|
The RTI 360-80471-00 is an R12 red hose assembly. It is 11 ft. with a 1/4 in. turn valve assembly. This hose works on most machines as well as gauge manifold sets. 1/4 in. Flare Female x 1/4 in. Flare Male, as comes on machines.
|
|
|
|
|
|
|
|
|
|
|
360-80471-03 Mahle Hose Red 36"
|
|
|
360-80471-03 Mahle Hose Red 36"
|
|
|
|
|
|
|
|
|
|
360-80472-00 RTI Sytem Hose Blue R12 11 Ft. W/Ball Valve As Comes On Most Machines
|
|
|
The RTI 360-80472-00 is an R12 blue hose assembly. It is 11 ft. with a 1/4 in. turn valve assembly. This hose works on most machines as well as gauge manifold sets. 1/4 in. Flare Female x 1/4 in. Flare Male, as comes on machines.
|
|
|
|
|
|
|
|
|
|
|
360-80514-02 RTI Valve Oil Drain (Will Not Fit RRC750 Gen I)
|
|
|
360-80514-02 RTI VALVE OIL DRAIN (WILL NOT FIT RRC750 GEN I)
|
|
|
|
|
|
|
|
|
|
|
360-80702-00 RTI Check Valve Assembly (022-80025-01 With 3/8 MFL Fitting)
|
|
|
Check valve assembly. Includes one 022-80025-01 (Check Valve with 1/4 FTP x 1/4 FPT), and one 3/8 MFL fitting.
|
|
|
|
|
|
|
|
|
|
360-81244-00 Mahle Kit Service Filters 69 77
|
|
|
360-81244-00 Mahle Kit Service Filters 026-80069-00 & 026-80077-00. RT/Mahle Filters need to be replaced every 25 hours of use in order to properly remove acids and moisture that can damage compressors and contaminate oil in the vehicle. DO NOT accept look alike or knock off filters. You should change the filter-drier seasonally to assure adequate moisture and contaminant removal.
|
|
|
|
|
|
|
|
|
|
|
360-81282-00 RTI Calibration Kit - Digital A/C Units
|
|
|
Calibration kit for digital A/c units.
|
|
|
|
|
|
|
|
|
|
|
360-81292-00 RTI Solenoid Mov Assy 120 Volt
|
|
|
360-81292-00 RTI SOLENOID MOV ASSY 120 VOLT
|
|
|
|
|
|
|
|
|
|
|
360-81301-00 RTI Conversion Kit - 780 From R134a To R12
|
|
|
Conversion Kit for the RHS780 model, modifies from using R134a to R12.
|
|
|
|
|
|
|
|
|
|
360-81307-00 RTI High Pressure Switch 261 PSIG 120 Volt
|
|
|
360-81307-00 RTI High Pressure Switch. Normally Closed Switch opens at
261 Psig, reset at 203 Psig. 120 Volt. 1/4" Female flare connection
includes flare gasket.
|
|
|
|
|
|
|
|
|
|
360-81314-00 RTI Switch Low Pressure 3PSIG-15IN-HG-SPDT(022-80050-01WITH GASKET)3Prong
|
|
|
360-81314-00 RTI Low Pressure Switch 15" Vacuum SPDT Low Pressure Cutout A normally closed sensor that opens, stopping the recovery process when the system pressure reaches 15" vacuum. SPDT Contact arangement. 1/4 spade termination. 1/4" Female spade fitting with shreader depressor.
|
|
|
|
|
|
|
|
|
|
|
360-81315-00 RTI Conversion Kit - 780 From R12 To R134a
|
|
|
Conversion Kit for the RHS780 model, modifies from using R12 to R134a.
|
|
|
|
|
|
|
|
|
|
|
360-81321-01 RTI Cylinder Internal (RHS780 And RHS2780)
|
|
|
Internal cylinder for models RHS780 and RHS2780.
|
|
|
|
|
|
|
|
|
|
360-81401-00 RTI Solenoid Rebuild Kit Parker
|
|
|
Complete kit includes everything needed to rebuild a solenoid. Designed for units manufactured after 0699 with Parker Solenoids. Kit includes solenoid body, solenoid plunger, wave washer, o-ring and coil retaining clip.
|
|
|
|
|
|
|
|
|
|
|
360-81425-01 RTI Heater Assembly Internal Cylinder 110 Volt With Transfer Paste
|
|
|
360-81425-01 RTI Heater Assembly Internal Cylinder 110 Volt With Transfer Paste, 1/4" Male Pipe Fitting.
|
|
|
|
|
|
|
|
|
|
|
360-81426-01 RTI Heater Belt Assy
|
|
|
360-81426-01 RTI HEATER BELT ASSY
|
|
|
|
|
|
|
|
|
|
|
360-81447-00 RTI Cylinder Internal (730)
|
|
Discontinued See 360-82406-00
|
|
|
Internal cylinder for RHS730.
|
|
|
|
|
|
|
|
|
|
360-81618-00 RTI Inlet Filter Element 10 Pack
|
|
|
Inlet filter for R-134a units comes assembled ready to install. Constructed of solid brass for durability and long life. Screen mesh element is replaceable.
|
|
|
|
|
|
|
|
|
|
|
360-81670-01 RTI Compressor 110V - Electrolux (All Units Built With Electrolux)
|
|
|
110-volt compressor for all Air Conditioning Service units with Electrolux compressors.
|
|
|
|
|
|
|
|
|
|
360-82029-00 RTI Maintenance Kit For RHS780/RHS730V Machines
|
|
|
360-82029-00 RTI Maintenance Kit for RHS780/RHS730V Machines. Includes filter 026-80069-00 & 026-80077-00.
|
|
|
|
|
|
|
|
|
|
|
360-82090-00 Mahle Fan Motor 115 Volt RHS980
|
|
|
360-82090-00 Mahle Fan Motor 115 Volt RHS980
|
|
|
|
|
|
|
|
|
|
|
360-82096-00 RTI Replacement R12 Hose Gaskets (Quantity 10)
|
|
|
The RTI 360-82096-00 is a pack of 10 replacement hose gaskets for R12 machines.
|
|
|
|
|
|
|
|
|
|
|
360-82097-00 RTI Replacement R134a Hose Gaskets (Quantity 10)
|
|
|
360-82097-00 RTI Replacement R134a Hose Gaskets (quantity 10)
|
|
|
|
|
|
|
|
|
|
|
360-82113-00 Mahle Tank Hose
|
|
|
360-82113-00 Mahle Tank Hose
|
|
|
|
|
|
|
|
|
|
|
360-82265-00 RTI Circuit Board 120V Internal Steel Cylinder Units (Replaces 024-80060-01)
|
|
|
360-82265-00 RTI Circuit Board 780/98. Internal Steel Cylinder Units (Replaces 024-80060-01)
|
|
|
|
|
|
|
|
|
|
|
360-82268-00 RTI Circuit Board RHS780 30lb Tank 120V (Replaces 024-80078-01)
|
|
|
360-82268-00 RTI Circuit Board RHS780 30lb Tank 120V (Replaces 024-80078-01)
|
|
|
|
|
|
|
|
|
|
|
360-82274-00 RTI Circuit Board RHS780 50lb Tank 120V (Replaces 024-80105-01)
|
|
|
360-82274-00 RTI Circuit Board RHS780 50lb Tank 120V (Replaces 024-80105-01)
|
|
|
|
|
|
|
|
|
|
|
360-82406-00 RTI Cylinder Internal (730)
|
|
|
360-82406-00 Internal cylinder for RHS730.
|
|
|
|
|
|
|
|
|
|
360-82506-00 RTI Inline 10 Micron Filter Kit (Bubble O-ring Tube)
|
|
|
RTI Inlet filter for R-134a units comes assembled ready to install. Installs on the fitting of the tank liquid port of your recycling unit. Constructed of solid brass for durability and long life. Screen mesh element is replaceable. The mesh is small enough to catch debris, rust and particulates that could possibly harm your recovery unit. Easy to install and maintain. Use one on each side of your unit. To install simply remove existing inlet fitting and replace with this unit.
|
|
|
|
|
|
|
|
|
|
360-82546-00 RTI Inline 10 Micron Filter Kit Tank Fill Port (Bubble O-ring Tube)
|
|
|
RTI Inlet filter for R-134a units comes assembled ready to install. Installs on the tank fill port of your recycling unit. Constructed of solid brass for durability and long life. Screen mesh element is replaceable. The mesh is small enough to catch debris, rust and particulates that could possibly harm your recovery unit. Easy to install and maintain. Use one on each side of your unit. To install simply remove existing inlet fitting and replace with this unit.
|
|
|
|
|
|
|
|
|
|
|
360-82905-00 Mahle Heater Belt Field Install Kit
|
|
|
360-82905-00 Mahle Heater Belt Field Install Kit - Easy plug & play installation
|
|
|
|
|
|
|
|
|
|
|
360-82928-00 RTI Oil Drain Assembly
|
|
|
RTIs 360-82928-00 8 oz. oil drain assembly can be used with many popular machines that are equipped with a 1/4 in. flare oil drain port. The precision needle valve lets the operator control the flow. The bottle graduations allow for an accurate measurement of removed oil.
|
|
|
|
