Kastar Hi-Tech Internal External Snap Ring Pliers easily convert between internal and external by flipping the switch and squeezing the handles together until you hear the click. Double-dipped custom grip made of low-temp, high-impact material for comfort and durability. Replaces 10 or more of any single competitor’s fixed tip pliers. Works on ring sizes, Internal – 3/8” – 2” (10mm – 51mm), External – 1/4” – 2” (7mm – 51mm).

Adjustable Jaws Fit All Clamp Sizes for Easy Removal and Installation.

18400 Titan Convertible Internal External Snap Ring Pliers are probably the finest snap ring plier you will own. After years of struggling with pliers that don't stay connected at the pivot point, or tips that aren't angled correctly and the ring slips off, losing a hex key to replace tips is murder or tools that just don't work well, we have found the solution. The 18400 Titan unit really delivers. To start the pivot point is completely different than anything out there. A simple mechanical ratchet system keeps the union tight and in the correct orientation and the action is reversible with a flip of a lever from internal to external.

18402 Titan Convertible Internal External Snap Ring Plier Set. Both Internal and External Snap Rings, Includes 4 Interchangeable Tips: 2 Straight, 1-90 degree, 1-45 degree. Comfort Grip Handles. Effective Range: 10 - 50 mm (3/8 X 2).

18404 Titan 4pc 6in Plier Set: This four plier set will help you grab, hold, cut, bend and twist the materials that you need to. With comfortable handles for reduced operator fatigue and steel construction, these are a great addition to your toolbox.

18405 Titan 5pc Mini Plier Set: This five plier set will help you grab, hold, cut, bend and twist the smaller materials that you need to. With comfortable handles for reduced operator fatigue and steel construction, these are a great addition to your toolbox.

18450 Titan 3pc Lock Grip Pliers Set: This pliers set all have adjustable curved locking jaws, chrome vanadium steel construction and comfortable grips. Get yours today.

28630 Rigiflex Hose Clamp Pliers

This unique hose clamp plier utilizes a flexible cable with a precision machined clamp at the end to reach where other pliers can not. Enable the user to reach, remove and lock clamps into the open position. Makes the job easier & more cost efficient

Repl Cable For 28650

Full cable repair kit for hose clamp plier #45650, 28650 and 28640

2 Pc. Hose Clamp Pliers Kit

Universal Convertible Retaining Ring Pliers Small

XL Convertible Internal/External Snap Ring Pliers

32019 Titan Diagonal Pliers

The 337 Channellock 7” Lap Joint Cutting Pliers are precision made of fine polished, high carbon drop forged steel.  They feature perfectly mated cutters, scientifically heat treated to hold their edge.

The 338 Channellock 8” Lap Joint Cutting Pliers are precision made of fine polished, high carbon drop forged steel. They feature perfectly mated cutters, scientifically heat treated to hold their edge.

3729 Push Pin Removal Plier

The GearPlier combines fine ratcheting action (180 teeth) with interchangeable tips to provide unmatched performance and flexibility when compared to all other specialty pliers. The Plier itself is made from cast stainless steel for strength and durability.

3836 15 pc. Master GearPliers Set

6 Pc. Cam-Lock Style Convertible Snap Ring Pliers Set In Case

3888 80 Degree Push Pin Pliers

3953 E-Ring Installer and Removal Kit

41840 2 pc. Push-pin Pliers Set

Channellock 9-1/2" Tongue & Groove Pliers.  Right angle teeth grip in all directions for maximum bite and minimum wear.

The 424 Channellock 4.5” Tongue and Groove Pliers are built to last with the Patented PermaLock fastener that eliminates the nut and bolt failures that occur with other brands. They feature an undercut tongue and groove design that assures no-slip jaw action, and a reinforced edge that minimizes stress breakage.

The 426 Channellock 6-1/2” Tongue and Groove Pliers are built to last with the Patented PermaLock fastener that eliminates the nut and bolt failures that occur with other brands. They feature an undercut tongue and groove design that assures no-slip jaw action.

Channellock 10" Tongue & Groove Pliers are built to last with the Patented PermaLock fastener that eliminates the nut and bolt failures that occur with other brands. They feature an undercut tongue and groove design that assures no-slip jaw action.

The 437 Channellock 7” Box Joint Cutting Pliers are precision made of fine polished, high carbon steel.  They feature perfectly mated cutters, scientifically heat treated to hold their edge, and distinctive CHANNELLOCK BLUE comfort grips.

The 440 Channellock 12” Tongue and Groove Pliers are built to last with the Patented PermaLock fastener that eliminates the nut and bolt failures that occur with other brands. They feature an undercut tongue and groove design that assures no-slip jaw action.

44480 Hose Clamp Vise - Large

44500 Hose Clamp Vise - Small

Channellock Box Joint Curved Diagonal Pliers 7 3/4 in.   This 7 3/4 in. dike is made of high carbon drop forged steel. The cutter is curved, which helps you to make cuts closer to the work surface.

OTC 4496 Hose Clamp Pliers Set - Contains five different styles of hose clamp pliers, which will service most flat-band and ring-style hose clamps. Also contains a hose removal tool.

OTC 4502 Hose Clamp Pliers Set - Includes a cross-slotted jaw pliers and a wide, flat-band hose clamp pliers. Services most ring-type or flat-band hose clamps. The clamps are held open with a ratchet locking mechanism. Jaws swivel to access hose clamps in any position.

45212 Titan 300pc Snap Ring Assortment: This assortment contains six of the most popular sizes of internal snap rings, 12 of the most popular sizes of external snap rings and comes in a re-useable plastic case.

Solid, one piece construction. Use on standard & space saver clamps up to 2-3/32". Locking device for control & comfort, Uses 28651 and 28654 replacement cable and sheath systems.

CHANNELLOCK 16" Tongue & Groove Pliers.  Patented undercut tongue and groove design assures none slip jaw action while the right angle teeth grip in all directions for maximum bite and minimum wear.

A handy combination tool for internal and external snap rings.

OTC 4720 Boot Clamp Pliers – Chrysler - Required tool for correct installation of strap-and-buckle style CV boot clamps.

OTC 4721 CV Boot Clamp Cutter - Designed to easily cut the CV boot clamp without damaging the boot.

OTC 4722 Heavy-Duty CV Boot Clamp Installer - Required tool for correct installation of the heavy-duty clamps used on the S.S.G. hard plastic CV boots found on Chrysler, Plymouth, and Dodge front-wheel drive cars.

OTC 4723 Ear-Type CV Boot Clamp Pliers - Designed to crimp the ear-type CV boot clamps used on front-wheel drive vehicles.

OTC 4724 CV Boot Clamp Pliers - Special tips work on the ear-less type CV boot clamps.

OTC 4795 Safety Wire Twist Pliers - These versatile 8" pliers will reliably twist safety wire rapidly and consistently. The right hand twist mechanism features an automatic spring return. The forged alloy steel construction features tapered jaws for confined areas and mated cutters to cut safety wire. For use on safety wire applications found on vehicles, machinery, and aircraft.

Big as the job. Big as you need. The 480 Channellock 20-1/4” BigAzz Tongue and Groove Pliers with the PermaLock fastener have right angle teeth that grip in all directions for maximum bite and minimum wear.  The patented undercut tongue and groove design assures no slip jaw action

The 526 Channellock 6” Slip Joint Pliers with wire cutting shear are thick nose pliers crafted of fine polished, high carbon drop forged steel.  They feature a shear-type wire cutter and the patented PermaLock fastener that eliminates nut and bolt failures.

The IRWIN VISE-GRIP Original Locking Pliers Set, 5 Piece, includes five of the most commonly used locking pliers. Constructed of high-grade heat-treated alloy steel for durability, these pliers have the classic trigger release that provides maximum locking force and a turn-screw that stays adjusted for repeated use. Set includes 10" straight jaw locking pliers, 10" curved jaw locking pliers, 7" curved jaw locking pliers with wire cutter, 6" long nose locking pliers, and 5" curved jaw locking pliers. Includes 10R, 10CR, 7WR, 5WR, and 6LN

60720 Titan 6in Slip Joint Pliers

60721 Titan 8in Slip Joint Pliers

60722 Titan 10in Slip Joint Pliers

60725 Titan 6in Diagonal Pliers

60726 Titan 8in Diagonal Pliers

60727 Titan 8in Linesman Pliers

60731 Titan 6in Long Nose Pliers

60732 Titan 6in Bent Long Nose Pliers

60733 Titan 8in Long Nose Pliers

60741 Titan 10in Groove Joint Pliers

60743 Titan 12in Groove Joint Pliers

60745 Titan 16in Groove Joint Pliers

60752 Titan 5in Curve Jaw Locking Pliers

60754 Titan 7in Curve Jaw Locking Pliers

60756 Titan 10in Curve Jaw Locking Pliers

60757 Titan 10in Straight Jaw Locking Pliers

60758 Titan 6in Long Nose Locking Pliers

60760 Titan 9in Long Nose Locking Pliers

60769 Titan 5 pc. 11 in. Pliers Set. Titan Tools 11 Inch Hose Grip Pliers Set features a long reach design allowing for greater access in tight hard to reach areas. With serrated jaws these pliers provide greater gripping power for that no-slip action! Set contains one of each 11" long nose pliers, 11" 45 degree long nose pliers, 11" 90 degree long nose pliers, 11" flat long nose pliers, 11" diagonal cutting pliers.

60771 Titan 11in Straight Long Nose Pliers

60773 Titan 11in 45 Degree Long Nose Pliers

60774 Titan 11in 90 Degree Long Nose Pliers

6720 OTC Flare Nut Locking Plier Set 3 Pc -     Designed for use on new or damaged flare nuts that have been rounded or rusty. Works with both SAE and Metric nuts & bolts.

6720-1 OTC Flare Nut Locking Plier 1/4" - 5/16" - Designed for use on new or damaged flare nuts that have been rounded or rusty. Fits 1/4" to 5/16" or 6mm to 8mm.

6720-2 OTC Flare Nut Locking Plier 3/8" - 7/16" - Designed for use on new or damaged flare nuts that have been rounded or rusty. Fits 3/8" to 7/16" or 9mm to 11mm.

6720-3 OTC Flare Nut Locking Plier 1/2" - 5/8" - Designed for use on new or damaged flare nuts that have been rounded or rusty. Fits 1/2" to 5/8" or 12mm to 16mm.

6720-4 OTC Flare Nut Locking Plier 11/16" - 7/8" ​- Designed for use on new or damaged flare nuts that have been rounded or rusty. Fits 11/16" to 7/8" or 17mm to 22mm.​

Straight Tip Pliers Kit

45° Pliers Kit

External Snap Ring Pliers: These pliers are for the manipulation of external snap rings.

Internal Snap Ring Pliers: These pliers are for the manipulation of internal snap rings.

4 Mini Diagonal Plier

Double X - Straight Pliers

82103 4 pc. Standard Pliers Set

82106 2 Pc. Double X Pliers Set

82107-06 3 Pc. Double X Hose Pliers Set

82116 KD Tools 7 Pc Mixed Dipped Handle Plier Set. Multiple jaw positions for flexibility and improved gripping comfort Unique Nickel Based Alloy Steel for superior toughness. Edge to edge cutting. Laser hardened cutting edges. Meets or exceeds ASME performance requirements. Set includes; 10 Tongue and Groove, 12 Tongue and Groove, 8 Slip Joint, 7 Long Nose, 8 Linesman, 7 Diagonal, and 7 End Nippers.

Internal Snap-Ring Pliers

Internal Snap Ring Remover

Astro Pneumatic's 9401 8 pc. Snap-Ring Pliers Set operates both internal and external rings.  They are constructed of heat treated chromium molybdenum steel with insulated vinyl handles for comfort.

Astro Pneumatic's 9402 2 pc. Large 16” Snap-Ring Pliers feature replaceable points and a spring ratchet locking mechanism to securely hold against circlip tension. Heavy Duty for Internal/External Circlips.

Astro Pneumatic's 9406 Hose Pliers Kit includes a variety of hose and clamp pliers needed when repairing autos and appliances. Packed in a blow molded case.

Astro Pneumatic 9409A Hose Clamp Pliers allow for extra reach, removal and locking of clamps into the open position. They will remove plastic and/or metal self-tightening hose clamps with diameters of 11/16" - 2-1/2" (18mm-54mm). Features precision clamp for extended reach.  They're lockable, and have a lifetime warranty.

This 5 piece Tool Roll Channellock Pliers set includes (1) 2 Position Slip Joint Pliers, (1) 7-3/4" Diagonal Lap Joint Pliers, (1)9" Multi Tongue & Groove Pliers, (1) Long Nose Pliers, and (1) Crimping Tool.

The CBR8 Channellock 8 pc. Code Blue Tool Roll includes 1 each: 10” Tongue and Groove, 9.5” Tongue and Groove, 9” High Leverage Linemen’s Pliers, 9” Cable Cutter, 9” Crimping/Cutting Tool, 8” End Cutting Plier, 8” Long Nose Plier, and 8” Diagonal Cutting Plier.

Made of custom US-made steel, these  8-5/16" Long-Nose Pliers with Side Cutters are have hardened cutting knives and a heavier design for greater cutting power and longer life.  Extended handles give added reach and more leverage while  the slim head design allows working in confined areas.  The hot-riveted joint ensures smooth action and prevents handle wobble.

Klein 9-1/4" Hi-Leverage Side-Cutting Pliers provide 46% greater cutting and gripping power than other plier designs.  Features a streamlined, cross-hatched knurled jaw design.  Unique handle tempering helps absorb the "snap" when cutting wire, and "handform" handles make them easy to grip.  Made of custom US-made steel.

Klein Pliers are made up of finest U S Steel alloy. They are forged precision machined hardened and carefully tempered for maximum strength. Klein Pliers provide exceptional performance and durability. High-leverage design.

Klein Tools specializes in making the finest pliers in the world.  These 10" Pump Pliers feature a tongue and groove design for a non-slip grip - even when applying heavy pressure.  A wide range of jaw positions are available to meet the demands of the professional.  Handles are plastic dipped for comfort.

GS3SA Channellock 3 Piece Tongue & Groove Plier Set With Screwdriver. Features: high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention . Right angle, laser heat-treated teeth grip better and last longer . Undercut tongue and groove design won't slip . Patented reinforcing edge minimizes stress breakage.

The J2000-9NE Journeyman Hi-Leverage Side-Cutting Pliers provide a 46% greater cutting and gripping power than other plier designs.  Cuts ACSR, screws, nails and most hardened wire. Features dual material handles, sure-gripping, cross-hatched knurled jaws, induction hardened cutting knives, and a hot-riveted joint to ensure a long life, smooth action, and no handle wobble.

Klein Journeyman Heavy-Duty Side Cutter Long-Nose Pliers have a skinning hole to cleanly strip 12 AWG wire.   Knives are induction-hardened for long lasting cuts.  Heavier design and extended handles provide added reach, leverage, and greater cutting power.  The hot-riveted joint ensures no handle wobble.  Dual-material handles for a more comfortable grip and added durability.

T21295 JB Industries Snap Ring Pliers (Includes one 33112RK) - For rebuilding KOBRA® CLS & CLS5 Secure Seal fittings.