13-505 CPS Capacitor 460-552 MFD 125VAC

30-480 CPS Cap 1/4 SAE Female w/strap

30-770 CPS Low Pressure Gauge (Rear Tap)

30-771 CPS High Pressure Gauge (Rear Tap)

30-772 CPS Low Pressure Gauge (Rear Tap)

30-773 CPS High Pressure Gauge (Rear Tap)

35-102 CPS Main Power Switch DPST On-Off

35-108 CPS Selector Switch. SPST (On-Off), 16 A 125VAC. 1/4" Quick Connect Terminal. Panel mount, Hole Size: 28.58 mm x 13.97 mm

35-111 CPS Vacuum pressure switch 10"hg. Normally closed switch, opens at 10" Resets at 2 PSI.

37-106 CPS Compressor Start Relay 4CR-1-738

37-116 CPS Relay SPDT 100 Volt Coil

39-011 CPS Circuit Breaker 8 amp

39-017 CPS Circuit Breaker 15 amp

39-020 CPS Fan Motor Assy 115vac 50/60hz

39-021 CPS FAN Motor Assy 220vac 50/60hz

40-627 CPS Crank Housing Gasket 3.400" ID x 3.650" OD x .1"

41-070 CPS 1/8" Pressure Hose Compression Ferrule & Nut

41-071 CPS 1/8" Diameter 12" long Pressure Tube For Gauges. 1/8" OD X .058 ID Black Nylon 830 PSIG Pressure Hose.

41-200 CPS Crank Housing CR700

41-206 CPS Connecting Rod CR700

41-210 CPS Piston Wrist Pin Bearing

41-216 CPS CR700 Discharge Valve

41-238 CPS 2 CYL Suction Valve O-Ring

41-504 CPS Shoulder Strap

41-639 CPS FAN GRILLE CR700 Cabinet

42-195 CPS KNOB  PRO-SET  PLASTIC ROUND

42-881 CPS Pump Down Handle

44-158 CPS CR700 OUTLET GRILLE

44-159 CPS Control Panel

82-105 CPS Electrical Inlet IEC 320

82-114 CPS Rubber feet 1/4-20 x .625"

82-128 CPS Rubber Foot 1/4"-20

86-108 CPS Upper Case Bolts 1/4-20 X 4.5"

86-109 CPS Case lock nuts 1/4-20

86-131 CPS Lower Case Bolts 1/4-20 X 6"

86-138 CPS 5/16 SAE Washer

86-149 CPS Pump Down Handle Screw. MS-4 4-40 .312 PHMS With Star Washer

AR2788X32 CPS 15 Amp Magnetic Circuit Breaker

AR2788X40 CPS 6 Ft Power Cord 115 Vac

CR700COIL-A1 CPS Condenser Coil Assembly

CR700MNFLD-A1 CPS CR700 Manifold Assembly. Includes aluminum block, pressure switch installed, pressure hose, gauge supply hoses and ferrules.

CR7CMP100-A1 CPS CR700J Compressor Assembly

CR7CMP110-A1 CPS CR700 Compressor

CR7CMP220-A1 CPS CR700E Compressor Assembly (New Case)

CR7MNFLD-A1 CPS CR7/CR700 Manifold Assembly. Includes aluminum block, pressure switch installed, pressure hose, gauge supply hoses and ferrules.

CRCU2-A1 CPS Copper Suction Line

CRH11-A1 CPS Discharge Hose

CRXCR8 CPS CR700 Compressor Rebuild Kit. Includes: Valve plate with through bolts, Valve with spring, Cylinder, Piston with Seals, Bearing and concentric with counter weight and bolts, 6 case bolts, Case gasket.

6 Replacement Suction Filters & 1 Inlet Fitting for CPS Recovery Units

The CRXOS1 CPS Oil Separator provides a simple but effective means to remove small amounts of oil in the recovery stream for cleaner gas. Use in conjunction with a filter drier for even cleaner refrigerant for recharging. Equipped with standard 1/4" flare fittings and an inlet hose. When recovery is complete, simply drain the unit with supplied valve. Includes mounting hardware.

CPS CR Series Recovery Tank Overfill Protection Kit provides a safe means of recovering refrigerant into a cylinder without the worry of overfilling it causing a potetially hazardous situation. Normally the technician would have to be present to safely recover with a scale, now you can hookup and walk away with out fear of overfulling your tank.

Recovery Tank Overfill Protection Kit provides a safe means of recovering refrigerant into a cylinder without the worry of overfilling it causing a potentially hazardous situation. Normally the technician would have to be present to safely recover with a scale, now you can hookup and walk away with out fear of overfilling your tank. When the recovery cylinder reaches 80% capacity, the unit is shut off via a relay in the machine. Simply change cylinders and restart the unit. Works with any size cylinder with a 3-pin Brad Harison Plug and includes a shorting cap for working with tanks without a float.

CRXTOSP1 Tank Overfill Protection Cable Shorting Plug allows the user to override the tank float safety device on most recovery units using a 3 pin brad Harrison cable. Screws in place at the cable end allowing the unit to start. (Always use a scale for accuracy when using this device) 30 & 50 pound tanks should never be filled to a level beyond 80% of tank capacity.

M2XRK CPS Diaphragm Valve Repair Kit Services 2 Valves

M4XRK CPS Diaphragm Valve Repair Kit Services 4 Valves

M5XRK CPS Diaphragm Valve Repair Kit Services 5 Valves

MXPV CPS Black Max Piston Valve Assembly (1) Valve Stem

MXPVO CPS Black Max Piston Seal (Services Two Valves)

The TR700 CPS 2 Cylinder Commercial Refrigerant Recovery System is The ultimate in dependability. Designed for servicing residential and commercial refrigeration systems, the BlackMAX® TR700 is the industry’s best looking and best-performing refrigerant recovery machine incorporating nonrestrictive piston manifold valves, a powerful two cylinder oil-less reciprocating compressor and twin fans. The resulting system provides superior airflow and condensing, which maximizes speed in both direct liquid and vapor recovery. Designed with high temperature materials. High strength bourdon tube gauges provide accurate vibration free movement. Twin fan design for ultra cool operation and high level condensing for cooler tank temps. Simple inlet and outlet valves with 1/4" flare fittings in the rear of the unit. A powerful 2/3 HP oil-less 2 cylinder reciprocating recovery compressor provide greater speed. Exceptional compressor, condensing and cooling systems allow fast recovery in high temperature environments. Automatic low pressure shut-off feature turns unit off when recovery is completed, restarts when a pressure rise occurs, truly automatic. 2 year warranty.

TRS19 CPS 2 Cylinder Commercial Sparkless Refrigerant Recovery Machine is Fast, Lightweight, Portable, Oil-less recovery of all Medium / High pressure gasses. Weighing in at only 19 pounds The TRS19's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, Direct Vapor rates as fast as .32 lb/min and Direct liquid rates as high as 9.56 lbs/min why even the push pull beats out the competition at over 19 lbs/min. The TRS19's Maintenance free Oil-less compressor features permanently lubricated and sealed main bearings and the optimized 2 cylinder / motor design provide fast efficient recovery of all gasses including R-410a. The unit also features a Cleanable 100 - mesh screen integrated into Suction Port to keep particulates from damaging the unit.

TRS21 CPS 2 Cylinder Ignition Proof Refrigerant Recovery System has now been approved for use with R-600 & R-601 features include an Ignition proof ON-OFF switch, a sealed start relay and a hard wired 10’ (3 meter) power cord for safety. Weighing in at only 21 pounds The TRS21's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, The TR21's Maintenance free Oil-less compressor features permanently lubricated and sealed main bearings and the optimized 2 cylinder / motor design provide fast efficient recovery of all gasses including R-410a. The unit also features a Cleanable 100 - mesh screen integrated into Suction Port to keep particulates from damaging the unit. FOR USE BY PROFESSIONALLY TRAINED AND CERTIFIED OPERATORS ONLY. MOST STATES, COUNTRIES, ETC., MAY REQUIRE USER TO BE LICENSED. PLEASE CHECK WITH YOUR LOCAL GOVERNMENT AGENCY.

TRS600 CPS (Ignition Proof) 2 Cylinder Commercial Refrigerant Recovery System. Fast, Lightweight, Portable, Oilless recovery of all gasses and Now Approved For R-1234yf, R-600 & R-601 Refrigerants. Fast, Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 26 pounds. CPS introduces a new addition to its recovery machine line-up, the Pro-Set TRS600. A lightweight, efficient and reliable refrigerant recovery machine in a compact, rugged, contemporary housing – the TR600 offers the ideal combination of form and function to make refrigerant recovery fast and easy! The TRS600 adds the speed and convenience of CPS's proven oilless technology plus added condenser cooling in a lightweight package that's sure to speed up any recovery job. A Powerful 2/3 HP oil-less 2 cylinder reciprocating recovery compressor provides speed and and the added condenser adds ample cooling to keep tank temperatures low for fast recovery in high temperature environments. Now Approved For-600 & R-601 Refrigerant

TRS600E CPS 2 Cylinder Commercial Refrigerant Recovery System 240 Volt (Ignition Proof), Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 26 pounds. CPS introduces a new addition to its recovery machine line-up, the Pro-Set TR600. A lightweight, efficient and reliable refrigerant recovery machine in a compact, rugged, contemporary housing – the TR600 offers the ideal combination of form and function to make refrigerant recovery fast and easy! The TR600 adds the speed and convenience of CPS's proven oilless technology plus added condenser cooling in a lightweight package that's sure to speed up any recovery job. A Powerful 2/3 HP oil-less 2 cylinder reciprocating recovery compressor provides speed and and the added condenser adds ample cooling to keep tank temperatures low for fast recovery in high temperature environments.

TRSA21 CPS Refrigerant Scavenger SAE J2810 & J2851 Dual refrigerant Manifold & 30lb Tank. Fast, Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 21 pounds The TR21's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, The TR21's Maintenance free Oil-less compressor features permanently lubricated and sealed main bearings and the optimized 2 cylinder / motor design provide fast efficient recovery of all gasses including R-410a. The unit also features a Cleanable 100 - mesh screen integrated into Suction Port to keep particulates from damaging the unit.

TRSA30 CPS Refrigerant Scavenger SAE J2810 & J2851 & 30lb Tank. Fast, Lightweight, Portable, Oilless recovery of all gasses. Weighing in at only 25 pounds The TRSA30's unique "vacuum pump" style design makes it the most portable recovery unit made to date, but don't let the size fool you, this unit is fast, The TRSA30's Maintenance free Oil-less compressor features permanently lubricated and sealed main bearings and the optimized 2 cylinder / motor design provide fast efficient recovery of R134A & R1234yf. The unit also features a Cleanable 100 - mesh screen integrated into Suction Port to keep particulates from damaging the unit.