|
|
|
|
|
|
13067 Robinair High Vacuum Grease 1/2oz.
|
|
|
13067 Robinair High Vacuum Grease is a silcone based lubricant designed for high vacuum assembly applications. A stiff, nonmelting silicone lubricating material used to lubricate synthetic and silicone rubber gaskets being used in high temperature applications. High Vacuum Grease resists mineral oils and common gases and works well for a setting gel to capture o-rings during assembly.
|
|
|
|
|
|
|
|
|
|
DV-3E JB Industries 3 Cfm Eliminator Vacuum Pump
|
|
|
 Built for the Air Conditioning Serviceman who wants a high quality, dependable vacuum pump, the Eliminator® Series offers many higher end features without the higher end price. American made, 100% tested to JB’s stringent quality standards, backed by an unparalleled 24 month over-the-counter warranty, the Eliminator® is the best value vacuum pump in the industry. This is the only American made economy vacuum pump on the market.
|
|
|
|
|
|
|
|
|
|
DV-4E JB Industries 4 CFM Eliminator Vacuum Pump 115V 60Hz Motor with US Plug
|
|
|
DV-4E JB Industries 4 CFM Eliminator Vacuum Pump 115V 60Hz Motor with US Plug - Built for the air conditioning serviceman who wants a high quality, dependable vacuum pump, the ELIMINATOR® series offers many higher end features without the higher end price. American made, 100% tested to JB’s stringent quality standards, backed by an unparalleled 24 month over-the-counter warranty.
|
|
|
|
|
|
|
|
|
|
|
DV-6E JB Industries 6 Cfm Eliminator Vacuum Pump
|
|
|
Built for the Air Conditioning Serviceman who wants a high quality, dependable vacuum pump, the Eliminator® Series offers many higher end features without the higher end price. American made, 100% tested to JB’s stringent quality standards, backed by an unparalleled 24 month over-the-counter warranty, the Eliminator® is the best value vacuum pump in the industry. This is the only American made economy vacuum pump on the market.
|
|
|
|
|
|
|
|
|
|
DV-EP8 JB Industries Tethered Safety Cap 1/2"
|
|
|
DV-EP8 JB Industries 1/2" Red Plug For Handle: This Tethered Safety Cap is designed to prevent oil spills during transport.
|
|
|
|
|
|
|
|
|
|
DV-F6 JB Industries Oil Mist Filter 3/8"
|
|
|
DV-F6 Eliminates oil mist from pump handle. DV-F6 fits 3/8" exhaust pipe for all (Black Case) Eliminator series and pre-2008 model Platinums. DV-F8 fits 1/2" exhaust pipe in 2008 model Platinums & new style (Hammer case) Eliminator. Please check your handle before ordering.
|
|
|
|
|
|
|
|
|
|
DV-F8 JB Industries Oil Mist Filter 1/2"
|
|
|
DV-F8 Eliminates oil mist from pump handle. DV-F8 fits 1/2" exhaust pipe in 2008 model Platinums & new style (Hammer case) Eliminator, while DV-F6 fits 3/8" exhaust pipe for all (Black Case) Eliminator series and pre-2008 model Platinums. Please check your handle before ordering.
|
|
|
|
|
|
|
|
|
|
DVO-1 JB Industries Pint Bottle Deep Vacuum Pump Oil Pint (each)
|
|
|
Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. Pint
|
|
|
|
|
|
|
|
|
|
DVO-12 JB Industries Quart Bottle Deep Vacuum Pump Oil (Each)
|
|
|
Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky.
|
|
|
|
|
|
|
|
|
|
DVO-24 JB Industries Gallon Bottle Deep Vacuum Pump Oil (Each)
|
|
|
Black Gold Vacuum Pump Oil is the Gold Standard in Vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed which means it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky.
|
|
|
|
|
|
|
|
|
|
NFT5-4 JB Industries 1/4" O-Ring Seal Cap 10 Pack
|
|
|
 Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.
|
|
|
|
|
|
|
|
|
|
NFT5-4-100 JB Industries 1/4" O-Ring Seal Cap 100 Pack
|
|
|
One-hundred pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.
|
|
|
|
|
|
|
|
|
|
NFT5-4-25 JB Industries 1/4" O-Ring Seal Cap 25 Pack
|
|
|
NFT5-4-25 JB Industries 1/4" O-Ring Seal Cap 25 Pack - CAPS - 1/4" SAE cap. Package of 25. For deep vacuum and A/C refrigeration. Finger tight sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives JB's brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.
|
|
|
|
|
|
|
|
|
|
NFT5-4-CJ JB Industries 1/4" O-Ring Seal Cap with Bulk Jar (500 Piece)
|
|
|
NFT5-4-CJ JB Industries 1/4" O-Ring Seal Cap with Bulk Jar (500 Piece) - CAPS - 1/4" SAE cap. Package of 25. For deep vacuum and A/C refrigeration. Finger tight sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives JB's brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.
|
|
|
|
|
|
|
|
|
|
NFT5-5 JB Industries 5/16" O-Ring Seal Cap 5 Pack
|
|
|
NFT5-5 JB Industries 5/16" O-Ring Seal Cap 5 Pack - 5/16" SAE cap. Package of 5. For deep vacuum and A/C refrigeration. Finger tigt sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.
|
|
|
|
|
|
|
|
|
|
|
NFT5-5-100 JB Industries 5/16" O-Ring Seal Cap 100 Pack
|
|
|
NFT5-5-100 JB Industries 5/16" O-Ring Seal Cap 100 Pack. For deep vacuum and A/C refrigeration. Finger tigt sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.
|
|
|
|
|
|
|
|
|
|
NFT5-6 JB Industries 3/8" O-Ring Seal Cap 3 Pack
|
|
|
Three pack of 3/8'' SAE o-ring seal caps. For use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.
|
|
|
|
|
|
|
|
|
|
NFT5-6-100 JB Industries 3/8" O-Ring Seal Cap 100 Pack
|
|
|
One-hundred pack of 3/8'' SAE o-ring seal caps. For use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.
|
|
|
|
|
|
|
|
|
|
NFT5-8 JB Industries 1/2" O-Ring Seal Cap 3 Pack
|
|
|
NFT5-8 JB Industries 1/2" O-Ring Seal Cap 3 Pack - 1/2" SAE cap. Package of 3. For deep vacuum and A/C refrigeration. Finger tigt sealing for all male SAE connections. JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates.Ten pack of 1/4'' SAE caps for use with deep vacuum and a/c refrigeration. Finger tight sealing for all male SAE connections. Made in the USA.
|
|
|
|
|
|
|
|
|
|
PR-1 JB Industries Sight Glass
|
|
|
Replacement sight glass for vacuum pump DV-42N, DV-85N, DV-142N, DV-200N, DV285N, DV-3E, DV-4E, DV-6E. Used On All Models Except: Dv-3 Dv-5 Dv-127
|
|
|
|
|
|
|
|
|
|
PR-10 JB Industries Replacement Cover Assembly and Drain Valve
|
|
|
PR-10 JB Industries Replacement Cover Assembly and Drain Valve. Replacement cover assembly includes sight glass and drain valve. For DV-4E and DV-6E. For DV-3 and DV-5 manufactured prior to January 2001. Cover Assy For New Eliminators (Gray Hammer Tone Finish) Note: Old Style Black Covers For Eliminators Are Not Available. New Style Will Fit DV127- DV3-DV5- DV85c- All DV3e- DV4e- DV6e Note: Also DV42 – DV42n With S/N Prior To 0101 Includes: Oil Fill Plug – Drain Valve And Sight Glass.
|
|
|
|
|
|
|
|
|
|
PR-18 JB Industries Replacement Valve For Pump Cartridge
|
|
|
JB Industries Replacement valve for pump cartridge s/n 0107 and up DV-85N DV142N DV200N-DV285N. Kit For 3-4-5-6-7 Cfm Note: Can Not Be Used On Dv-142s With 6 Digit Serial Nos And Dv-200ns With Serial Nos Prior To 0796 Includes: 1ea Exhaust Valve – 1ea Exhaust Valve Retainer – 1ea Exhaust Valve Spacer – 1ea Intake Relief Valve – 1ea Intake Relief Valve Retainer.
|
|
|
|
|
|
|
|
|
|
PR-2 JB Industries Drain Valve
|
|
|
Drain Valve, Used On All Models.
|
|
|
|
|
|
|
|
|
|
PR-206 JB Industries 1/2 HP Motor 115V Complete w/Switch and Line Cord
|
|
|
1/2 HP Motor 115V Complete w/Switch and Line Cord
|
|
|
|
|
|
|
|
|
|
PR-207 JB Industries 1/2 HP 115/230V 50/60 Cycle Motor With Switch (No Cord)
|
|
|
PR-207 JB Industries 1/2 HP 115/230V 50/60 Cycle Motor With Switch (No Cord , Order Separately)
|
|
|
|
|
|
|
|
|
|
PR-208 JB Industries Flexible Coupler
|
|
|
Flexible Shaft Coupler connects the drive motor to the pumping section of a vacuum pump, it design is to break away, protecting the motor, in the event of pump failure or seizure. Flexible couplers are a three part assembly: 2 metal hubs that look like gears and a flexible middle section. One of the hubs is attached to the shaft of the motor and the other is attached to the shaft of the cartridge. NOTE: The color of the flexible middle section can be either black or yellow.
|
|
|
|
|
|
|
|
|
|
PR-217 JB Industries Cover Seal
|
|
|
New - Cover Seal For All Models Of Eliminators. Also replaces obsolete Cover Seal PR-11 For Dv85c, Dv127, Dv3, Dv5, (Dv42 and Dv42n With S/N Prior To 0101). Quad Ring .120" Thick.
|
|
|
|
|
|
|
|
|
|
PR-22 JB Industries Oil Fill Plug w/ O-ring
|
|
|
Oil Fill Plug w/ O-ring
|
|
|
|
|
|
|
|
|
|
PR-3 JB Industries Shaft Seal
|
|
|
Shaft Seal, Used On All Models.
|
|
|
|
|
|
|
|
|
|
PR-308 JB Industries Flexible Coupler Insert (PR-208 Only)
|
|
|
Flexible Shaft Coupler connects the drive motor to the pumping section of a vacuum pump, it design is to break away, protecting the motor, in the event of pump failure or seizure. Flexible couplers are a three part assembly: 2 metal hubs that look like gears and a flexible middle section. One of the hubs is attached to the shaft of the motor and the other is attached to the shaft of the cartridge. NOTE: The color of the flexible middle section may be black, green or yellow.
|
|
|
|
|
|
|
|
|
|
PR-31 JB Industries 6 ft / 16 Gauge SJT Line Cord (Emerson Motor)
|
|
|
PR-31 JB Industries 6 ft / 16 Gauge SJT Line Cord (Emerson Motor). Termination has 1) - Female 90 1/4" Quick Disconnect (Hot), 1) - Male 1/4" Quick Disconnect (Neutral), 1) - Ring Terminal (Ground).
|
|
|
|
|
|
|
|
|
|
PR-315 JB Industries Intake Trap O-Ring
|
|
|
Intake Trap O-Ring for pumps manufactured after 2001. For pumps manufactured prior 2001 see PR-215.
|
|
|
|
|
|
|
|
|
|
PR-35 JB Industries Rocker Style Switch (Marathon - Post Serial 1101-0105)
|
|
|
Rocker Style Motor Switch (Marathon - Serial Number After 1101-0105)
|
|
|
|
|
|
|
|
|
|
PR-40 JB Industries Splash Guard and Screw
|
|
|
Splash Guard and Screw: Splash guard and screw (Excludes 3cfm manufactured before 1/01. Use PR-39)
|
|
|
|
|
|
|
|
|
|
PR-403, JB Industries 1.5 3CFM Cartridge Complete w/O-Rings Cover Seal Replaces D10043 PR-305)
|
|
|
1.5 3CFM Cartridge Complete w/O-Rings Cover Seal (Replaces D10043 PR-305)
|
|
|
|
|
|
|
|
|
|
PR-404 JB Industries DV-4E Cartridge Complete w/O-Rings & Cover Seal PR-305)
|
|
|
DV-4E Cartridge Complete w/O-Rings & Cover Seal PR-305)
|
|
|
|
|
|
|
|
|
|
PR-406 JB Industries DV-6E Cartridge With O-Rings & Cover Seal PR-305
|
|
|
PR-406 JB Industries DV-6E Cartridge With O-Rings & Cover Seal PR-305
|
|
|
|
|
|
|
|
|
|
PR-501 JB Industries Vacuum Pump Handle Cushion & Cap 1/2"
|
|
|
PR-501 JB Industries Vacuum Pump Handle Cushion & Cap 1/2"
|
|
|
|
|
|
|
|
|
|
|
PR-506 JB Industries 3/8" Pump Handle Cap
|
|
|
PR-506 JB Industries 3/8" Pump Handle Cap
|
|
|
|
|
|
|
|
|
|
|
PR-508 JB Industries 1/2" Pump Handle Cap
|
|
|
PR-508 JB Industries 1/2" Pump Handle Cap
|
|
|
|
|
|
|
|
|
|
PR-54 JB Industries Rocker Style Switch w/ Wire Leads (Emerson)
|
|
|
Rocker Style Switch w/ Wire Leads (Emerson)
|
|
|
|
|
|
|
|
|
|
PR-58 JB Industries 6 ft / 16 Gauge SJT Line Cord (Marathon Motor)
|
|
|
PR-58 JB Industries 6 ft / 16 Gauge SJT Line Cord (Marathon Motor). Termination has 1) - Female 90 1/4" Quick Disconnect (Hot), 1) - Female 90 1/4" Quick Disconnect (Neutral), 1) - Ring Terminal (Ground).
|
|
|
|
|
|
|
|
|
|
PR-59 JB Industries PR-62 Pump Base Foot
|
|
|
PR-59 JB Industries PR-62 Pump Base Foot
|
|
|
|
|
|
|
|
|
|
PR-62 JB Industries Vacuum Pump Base With Screws
|
|
|
PR-62 JB Industries Vacuum Pump Base with rubber feet and mounting Screws.
|
|
|
|
|
|
|
|
|
|
PR-63 JB Industries 1/4" Intake with Cap
|
|
|
1/4" Intake with Cap
|
|
|
|
|
|
|
|
|
|
PR-65 JB Industries Cushioned Vacuum Pump Handle 1/2"
|
|
|
Replacement cushioned vacuum pump handle 1/2'' NPT for DV-3E, DV-4E, and DV-6E (Hammertone Case). Can be used as a universal pump handle for other manufactures units.
|
|
|
|
|
|
|
|
|
|
PR-9 JB Industries DV-85C DV-42 Cover Assembly w/Sight Glass and Drain Valve
|
|
|
DV-85C DV-42 Cover Assembly w/Sight Glass and Drain Valve. Discontinued See PR-10
|
|
|
|
|
|
|
|
|
|
RT200R Refrigeration Technologies NYLOG RED (CFC/HCFC Mineral or AB) Gasket - Thread Sealant
|
|
|
RT200R Refrigeration Technologies NYLOG RED (CFC/HCFC Mineral or AB). NYLOG gasket and thread sealant renders a strong, flexible, lubricative glaze that prevents high pressure leakage through refrigeration gaskets and threaded fittings. NYLOG never hardens and always remains temperature and vibration resilient. Nylog Red is recommended for Mineral or Alkyl Benzene Systems
|
|
|
|
|
|
|
|
|
|
RT201B Refrigeration Technologies NYLOG BLUE (HFC/POE) Gasket - Thread Sealant
|
|
|
RT201B Refrigeration Technologies NYLOG BLUE (HFC/POE) Gasket - Thread Sealant. NYLOG gasket and thread sealant renders a strong, flexible, lubricative glaze that prevents high pressure leakage through refrigeration gaskets and threaded fittings. NYLOG never hardens and always remains temperature and vibration resilient. Nylog Blue is recommended for POE Oil Systems.
|
|
|
|
