| Index No. | Part No. | Description | No. Req'd |
| 1 | 2050524863 | Motor Housing | 1 |
| 2 | 2050524873 | Anvil | 1 |
| 3 | 2050524883 | Retaining Ring | 1 |
| 4 | 2050524893 | Throttle Lever | 1 |
| 5 | 2050524903 | Plunger | 2 |
| 6 | 2050524913 | Anvil Bushing | 1 |
| 7 | 2050524923 | Hammer | 1 |
| 8 | 2050524933 | Hammer Cage | 1 |
| 9 | 2050524943 | Regulator | 1 |
| 10 | 2050524953 | Hammer Pin (6 x 32L) | 1 |
| 11 | 2050524963 | Cam | 1 |
| 12 | 2050524973 | Oil Screw | 1 |
| 13 | 2050524983 | Ball Bearing (626ZZ) | 1 |
| 14 | 2050524993 | Rear End Plate | 1 |
| 15 | 2050525003 | Rotor | 1 |
| 16 | 2050525013 | Rotor Blade Set | 6 |
| 17 | 2050525023 | Throttle Pin | 2 |
| 18 | 2050525033 | Cylinder | 1 |
| 19 | 2050525043 | Front End Plate | 1 |
| 20 | 2050525053 | Ball Bearing (EE3) | 1 |
| 21 | 2050525063 | Rear Cap | 1 |
| 22 | 2050525073 | O-Ring (P4) | 2 |
| 23 | 2050525083 | Black Cap Gasket | 1 |
| 24 | 2050525093 | Motor Pin (2 x 54L) | 1 |
| 25 | 2050525103 | Plunger | 2 |
| 26 | 2050525113 | O-Ring (S36) | 1 |
| 27 | 2050525123 | Snap Ring (STW-12) | 1 |
| 28 | 2050525133 | CP Logo Ring | 1 |
| 29 | 2050525143 | O-Ring (8.8 x 1.7) | 1 |
| 30 | 2050525153 | Air Inlet | 1 |
| 31 | 2050525163 | O-Ring (5.8 x 1.9) | 1 |
| 32 | 2050525173 | Steel Ball (3/32") | 1 |
| 33 | 2050525183 | Spring | 1 |
| 34 | 2050525193 | Oil Seal | 1 |
| 35 | 2050525203 | Oil Seal | 1 |
| 36 | 2050525213 | Rubber Nose Guard | 1 |
| 37 | 2050525223 | Plunger Spring | 2 |
| 38 | 2050525233 | Valve Seat | 2 |
| 39 | 2050525243 | Valve Spring | 2 |
| 40 | 2050525253 | Long Cap Screw (M4 x 25L) | 2 |
| 41 | 2050525263 | Short Cap Screw (M4 x 20L) | 2 |
| 42 | 2050525273 | O-Ring (3.5 x 1.5) | 2 |
| 43 | 2050525283 | Snap Ring (RTW-39) | 1 |
| 44 | 2050527383 | Hook | 1 |
| 45 | 2050507633 | O-Ring (10.7 x 1.5) | 1 |
| 46 | 2050528743 | Washer | 1 |
| - | 8940164482 | Tune-Up Kit (Incl: 3, 16, 22, 23, 26, 29, 31, 34, 35, 38, 42, 45) | |
