Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service

You are here: Home > Air Tool Repair Parts > Ingersoll-Rand Air Tool Repair Parts > Ingersoll-Rand 2925B 1" Drive Air Impact Wrench Repair Parts

Ingersoll-Rand 2925P 1" Drive Air Impact Wrench Repair Parts


Item Part Number Part Description IR Equivalent
1 - Handle 2925B-92
2 9224 Handle Bolt (4) 2080-638
*
Trigger Assembly 2925B-A93
3 9687 Trigger 2925B-93
4 - Trigger Pin F02-15
5 8753 Trigger Pin 280-265
* 9681 Reverse Valve Assembly 2190-A329
6 8860 0-Ring 23446
7 9720 Reverse Lever Spring 2080-278
8 9719 Reverse Lever 2080-658
9 8184 Snap Ring 2161-28
10 8188 Reverse Valve 2161-329
11 8495 Trigger Plunger 2925B-94
12 8554 Throttle Valve Seat 2934-159
13 8598 Throttle Valve 2934-A50
14 8555 Throttle Valve Spring 834-51
15 8628 Inlet Screen 834-61
16 8179 Inlet Bushing Assembly 2161-A465A
16
 - Inlet Bushing 2161-465A
17 8627 Seal R4-210
18 8182 Grease Fitting R1 -188
19 8588 Handle Gasket 2161-739
20 8186 Motor Clamp Washer 2161-207
21 8038 Rear Rotor Bearing 4E-510
22 9149 Rear End Plate 2925-12
23 8171 End Plate Dowel 2920-74
24 8209 Rotor 2925-53
25 2199 Vane Packet (set of 7 Vanes) 2925-42-7
*
Cylinder Assembly

9146 for 2925B2Ti 2925-A3

8293 for 2925RB2Ti 2925RB-A3
26
Cylinder

9146 for 2925B2Ti 2925-3

8293 for 2925RB2H 2925RB-3
27
Cylinder Dowel (2)

9469 for 2925B2Ti JC3350-538

9469 for 2925RB2H JC3350-538
28 9148 Front End Plate 2925-11
29 8037 Front Rotor Bearing 834-24
30 8570 Motor Housing 2925B-A40
31 - Warning Label WARNING-2-99
32 9329 O-Ring C321-606
33 8658 Exhaust Cover 2080-123
34 8659 Snap Ring 3CS5492-28
35 8660 Muffler 2080-310
36 9357 Hammer Frame Washer 2161-706
37 8260 Hammer Frame 2925-703
38 8416 Hammer Pin (2) 2910-704
39 8694 Hammer (2) 2925-724
40 9662 Anvil 2910-826
41 8589 Hammer Case Gasket 2161-36
* 9693 Hammer Case Assembly 2190Ti-D727
42 9433 Hammer Case Bushing 2161-641
43 9693 Hammer Case 2190Ti-727
* 9695 Auxiliary Handle Assembly 2080-A48
44 - Auxiliary Handle 2080-48
45 8412 Bolt (2) 34U-103
46 - Strap 2080-364
* 9893 Tune-up Kit (includes parts 6, 12, 13, 14, 15, 17, 19, 21, 25, 29, 32, 35 & 41) 2925B-TK2

* Not Shown


Century Tool & Equipment is in no way affiliated with the above manufacturers. The parts advertised for sale are not always genuine parts, but are parts made for or by Century Tool & Equipment. Reference to said numbers are for your convenience only. We reserve the right to substitute genuine parts in place of Century Tool & Equipment parts.
Sort By:
Page of 1
100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools 100-1Lb Ingersoll-Rand 1 Lb. Standard-Duty Grease For Impact Tools

1 lb. Can tool lube. Standard-duty impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

Discontinued See 105-1LB
105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube 105-4T Ingersoll-Rand Metallic Housing Grease 4 oz. Tube

105-4T Ingersoll Rand Metallic Housing Grease 4 oz. Tube. Metallic housing impact wrench grease. For use with GTH-1 grease gun.

Price $14.03
105-4T-6 Ingersoll Rand Metallic Housing Grease Pack (6 Pack) 105-4T-6 Ingersoll-Rand Metallic Housing Grease Pack (6 Pack)

Box of 6 4 oz. Tubes of IR Number 105 Grease. Metallic housing impact wrench grease. For use with GTH-1 grease gun. (6 Pack) 1.

Price $79.85
105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing 105-LBK1 Ingersoll-Rand Air Care Kit For IRT105 Metallic Housing

Ingersoll Rand Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

Price $42.20
115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease 115-1LB Ingersoll-Rand 1Lb. Can Composite Housing Impact Wrench Grease

1 lb. Can tool lube. Composite housing impact wrench grease. Thicker longer lasting grease for assembling the hammer mechanism. Provides longer life and smoother operation than standard lubricants.

Unavailable
115-4T Ingersoll Rand Composite Grease 4 oz. Tube 115-4T Ingersoll-Rand Composite Grease 4 oz. Tube

115-4T Ingersoll Rand Composite Grease 4 oz. Tube. Composite housing impact wrench grease. For use with GTH-1 or other grease gun.

Price $11.44
115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit 115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit

115-LBK1 Ingersoll-Rand Composite Grease & Oil Air Care Kit includes GTH-1 Grease tube head, 10Z4 4oz. Bottle of #10 Air Tool Oil and 115-4T 4oz. Tube #115 Tool Grease.

Price $36.80
2199 2925-42 Rotor Vane Equivalent 2199 2925-42 Rotor Vane Equivalent Sold Each

Made In The USA2199  2925-42 Rotor Vane Equivalent - Sold Each

Price $3.38
8037 834-24 Bearing Equivalent 8037 834-24 Bearing Equivalent

Made In The USA8037  834-24 Bearing Equivalent

Price $7.28
8038 4E-510 Bearing Equivalent 8038 4E-510 Bearing Equivalent

Made In The USA8038  4E-510 Bearing Equivalent

Price $4.98
8171 2920-74 End Plate Dowel 8171 2920-74 End Plate Dowel

Made In The USA8171  2920-74 End Plate Dowel

Price $4.95
8179 2161-A465 Inlet Bushing (Course) Equivalent 8179 2161-A465 Inlet Bushing (Course) Equivalent

Made In The USA8179  2161-A465 Inlet Bushing (Course) Equivalent

Price $21.45
8182 R1-188 Grease Fitting (Zerk fitting) 8182 R1-188 Grease Fitting

Made In The USA8182  R1-188 Grease Fitting

Price $3.55
8184 2161-28 Reversing Lever Snap Ring 8184 2161-28 Reversing Lever Snap Ring

Made In The USA8184  2161-28 Reversing Lever Snap Ring

Price $4.00
8186 2161-207 Motor Clamp Washer 8186 2161-207 Motor Clamp Washer

Made In The USA8186  2161-207 Motor Clamp Washer

Price $4.95
8188 2161-329 Reversing Valve 8188 2161-329 Reversing Valve

Made In The USA8188  2161-329 Reversing Valve

Price $21.22
8209 2925-53 Rotor Equivalent 8209 2925-53 Rotor Equivalent

Made In The USA8209 2925-53 Rotor Equivalent

Price $230.55
8293 2925RB-A3 Stainless Steel Cylinder Reverse Bias With Stainless Pins 8293 2925RB-A3 Stainless Steel Cylinder Reverse Bias With Stainless Pins

Made In The USA8293 2925RB-A3 Stainless Steel Cylinder Reverse Bias With Stainless Pins

Price $198.00
8416 2910-704 Hammer Pin (Each) 8416 2910-704 Hammer Pin (Each)

Made In The USA8416 2910-704 Hammer Pin (Each)

Price $10.31
8554 2934-159 Throttle Valve Face 8554 2934-159 Throttle Valve Face

Made In The USA8554  2934-159 Throttle Valve Face

Price $0.63
8588 2161-739 Backcap Gasket 8588 2161-739 Backcap Gasket

Made In The USA8588  2161-739 Backcap Gasket

Price $5.00
8589 2161-36 Hammer Case Gasket 8589 2161-36 Hammer Case Gasket

Made In The USA8589  2161-36 Hammer Case Gasket

Price $3.00
8628 834-61 Stainless Steel Air Strainer 8628 834-61 Stainless Steel Air Strainer

Made In The USA8628 834-61 Stainless Steel Air Strainer

Price $9.78
8660 2080-310 Inger-Soll Rand Silencer 8660 2080-310 Inger-Soll Rand Silencer

Made In The USA8660 2080-310 Inger-Soll Rand Silencer

Price $1.60
8694 2925-724 Hammer 8694 2925-724 Hammer

Made In The USA8694  2925-724 Hammer

Price $92.40
8753 533-656 Trigger Pin Equivalent (Each) 8753 533-656 Trigger Pin Equivalent (Each)

Made In The USA8753 533-656 Trigger Pin Equivalent (Each)

Unavailable
8860 023446 O-Ring 8860 023446 O-Ring

Made In The USA8860  023446 O-Ring

Price $1.08
9146 2925-A3 Stainless Steel Cylinder Standard Bias With Stainless Pins 9146 2925-A3 Stainless Steel Cylinder Standard Bias With Stainless Pins

Made In The USA9146 2925-A3 Cylinder. Stainless Steel Standard Bias With Stainless Pins.

Price $198.00
9148 2925-11 Front End Plate 9148 2925-11 Front End Plate

Made In The USA9148  2925-11 Front End Plate

Price $90.75
9149 2925-12 Rear End Plate 9149 2925-12 Rear End Plate

Made In The USA9149  2925-12 Rear End Plate

Price $90.75
9224 2161-706 2080-638 Bolt 9224 2161-706 2080-638 Bolt

Made In The USA9224 2161-706 2080-638 Bolt

Price $5.00
9357 2161-706 Washer 9357 2161-706 Washer

Made In The USA9357  2161-706 Washer

Price $6.19
9433 2161-641 Bushing 9433 2161-641 Bushing

Made In The USA9433  2161-641 Bushing

Price $53.74
9469 JC3350-538 Roll pin 9469 JC3350-538 Roll pin

Made In The USA9469  JC3350-538 Roll pin

Price $2.88
9662 Ingersoll-Rand 2910-826 1in. Square Drive Anvil 9662 Ingersoll-Rand 2910-826 1in. Square Drive Anvil

Made In The USA9662 Ingersoll-Rand 2910-826 1in. Square Drive Anvil

Price $156.75
9681 2190-A329 IR Reverse Valve Assembly (Each) 9681 2190-A329 IR Reverse Valve Assembly (Each)

Made In The USA9681 2190-A329 IR Reverse Valve Assembly (Each)

Price $32.50
9687 2925B-93 Ingersoll-Rand Trigger Assembly 9687 2925B-93 Ingersoll-Rand Trigger Assembly

9687 2925B-93 Trigger Assembly

Price $24.00
9693 2190Ti-D727 Ingersoll-Rand Hammer Case Assembly With Bushing 9693 2190Ti-D727 Ingersoll-Rand Hammer Case Assembly With Bushing

9693 2190Ti-D727 Ingersoll-Rand Hammer Case Assemby With Bushing Installed

Discontinued
9719 2080-658 Ingersoll-Rand Reverse Lever 9719 2080-658 Ingersoll-Rand Reverse Lever

9719 2080-658 Reverse Lever

Price $8.00
2925B-TK2 Ingersoll-Rand 2925P Tune-up Kit (Includes Parts 6, 12, 13, 14, 15, 17, 19, 21, 25, 29, 32, 35 & 41) 9893 2925B-TK2 Ingersoll-Rand 2925P Tune-up Kit

Made In The USA2925B-TK2 Ingersoll-Rand 2925P Tune-up Kit Includes 2199 Vane Packet (set of 7 Vanes) 2925-42-7, 8037 Front Rotor Bearing 834-24, 8038 Rear Rotor Bearing 4E-510, 8554 Throttle Valve Seat 2934-159, 8555 Throttle Valve Spring 834-51, 8588 Handle Gasket 2161-739, 8589 Hammer Case Gasket 2161-36, 8598 Throttle Valve 2934-A50, 8627 Seal R4-210, 8628 Inlet Screen (Stainless Steel) 834-61, 8660 Muffler 2080-310, 8860 O-Ring 23446, 9329 O-Ring C321-606.

Price $74.50
GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease. GTH-1 Ingersoll-Rand Grease Tube Head

GTH-1 Ingersoll-Rand Grease Tube Head. Use with 4oz. Tube #115 Tool Grease.

Price $19.87
R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings R000A2-228 Ingersoll-Rand Push-Type Hand Grease Gun For Flush Fittings

Made In The USAIngersoll Rand R000A2-228 Push-type hand grease gun for flush-type fittings, holds up to 3 oz of grease.

Price $14.50