120220-001 QuickCable Battery Tray L16/GC2 4 Batteries

120221-001 QuickCable Battery Tray L16/GC2 3 Batteries

120225-001 QuickCable Battery Tray 8D/4D 4 Batteries

213910 QuickCable 10 Gauge 16" Cup Jumpers For Series Battery Chargers. 10 gauge UL 90ºC wire (UL style 3046). Polarity specific lead ends. Custom jumpers available. Length 16" (40 cm.) long, center to center. Fine stranded copper conductor, tin plated, for maximum conductivity, flexibility and corrosion resistance.

213910 QuickCable 10 Gauge 16" Cup Jumpers For Series Battery Chargers. 10 gauge UL 90ºC wire (UL style 3046). Polarity specific lead ends. Custom jumpers available. Length 16" (40 cm.) long, center to center. Fine stranded copper conductor, tin plated, for maximum conductivity, flexibility and corrosion resistance.

3899000310 Schumacher Top Post Charging Jumper Cable 12 Gauge 15" for series battery chargers with multiple battery hook up.

The Associated Model 6065 battery charger is designed to charge 1 to 10 12 volt automotive batteries in parallel, in parallel, in less than 24 hours. Designed with the fleet or high volume shop in mind. Great for salvage yards as well. The multiple charge rates allow batteries to be slow charged or fast charged at a rate not to exceed 30 amps output of the charger. Patented multi-diode rectifier with deep reserve capacity. The volt meter allows you to adjust the charge rate to compensate for battery type, size and quantity of batteries on a charge. The output leads are terminated in ring terminals and designed to be permanently attached to the Associated 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit.

The 6066A Associated Intellamatic® Smart Automotive Battery Charger is designed to charge 1 to 20, 12 Volt batteries in parallel in less than 24 hours. The 6066A Intellamatic® Smart Gang Charger fills the need to safely charge all battery types including Sealed AGM/Gel Batteries.  The 6066A has 60/30 Amp, 14.9V DC output with three automatic settings. Designed with the fleet for today’s professional technician including the heavy duty service professional. Patented multi-diode rectifier with deep reserve capacity. The output leads are terminated in ring terminals and designed to be permanently attached to the  Associated 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit.

The 6066A Associated Intellamatic® Smart Automotive Battery Charger is designed to charge 1 to 20, 12 Volt batteries in parallel in less than 24 hours. The 6066A Intellamatic® Smart Gang Charger fills the need to safely charge all battery types including Sealed AGM/Gel Batteries.  The 6066A has 60/30 Amp, 14.9V DC output with three automatic settings. Designed with the fleet for today’s professional technician including the heavy duty service professional. Patented multi-diode rectifier with deep reserve capacity. The output leads are terminated in ring terminals and designed to be permanently attached to the  Associated 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit.

Charges up to 36 automotive batteries in parallel, in less than 24 hours. Can be wall-mounted or on a stationary bench, 16 charge rates for precise charging. Engineered so that an initial high charge rate tapers down to a safe finishing level. Ideal For Fleets. The output leads are terminated in ring terminals and designed to be permanently attached to the Associated 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit.

Wall Mount Bus bar set for parallel charging. Ten battery capacity. Use one or combine additional bars for added capacity. Insulated fiberglass backboard with 10 pairs DC charging leads, 8 gauge, 48" long with 300-amp insulated safety clamps. Comes with three foot 4 AWG 36" cables to connect to charger or additional bus bars. Use with Model 6065, Model 6066A or Model 6068 multiple parallel battery chargers. Can be used with other manufactured Parallel chargers. (Replacement parts can be found here)

Wall Mount Bus bar set for parallel charging, Now with circuit breaker protection for greater safety and convenience. Ten battery capacity. Use one or combine additional bars for added capacity. Insulated fiberglass backboard with 10 pairs DC charging leads, 4 gauge, 48" long with 300-amp insulated safety clamps. Comes with 3' 4 AWG cables to connect to charger or additional bus bars. Use one or combine additional bars for added capacity. Use with Model 6065, Model 6066A or Model 6068 multiple parallel battery chargers. Can be used with other manufactured Parallel chargers.

The 6075CB-4 Associated In Vehicle Parallel Bus Bar Kit 4 Pair Circuit Breaker Protected Wall Mount Bus bar set for parallel charging batteries in vehicle, Now with circuit breaker protection for greater safety and convenience. 4 battery capacity. Use one or combine additional bars for added capacity. Insulated fiberglass backboard with 4 pairs DC charging leads, 5 gauge, 20' long with 300-amp insulated safety clamps, Ideally Paired with 6066A Intellamatic Smart 60/30A Gang Charger. Charge four batteries at 15 Amps per battery. Use with Model 6066A Gang charger.

The 6075S Wall Mount Parallel Bus bar set for parallel charging has just  been revamped, Now with Smart Circuit Protection. Protects and monitors  each circuit as it is being charged. Individually Fused Circuits for safety. Microprocessor controller monitors each circuit against over charging, detects bad batteries and high heat build-up in batteries. Status LED for each Circuit. for the ultimate in safety and convenience.  Ten battery capacity. Insulated fiberglass backboard with 10 pairs DC charging leads, 4 gauge, 48" long with 300-amp insulated safety clamps. Use one or combine additional bars for added capacity.Use with Model 6065, Model 6066A or Model 6068 multiple parallel battery chargers. Can be used with other manufactured Parallel chargers.

6078  Associated High Value and Efficient Parallel Automotive Battery Charger - This unit delivers powerful performance by being able to charge from one to 10 12 volt batteries (in parallel) in less than 24 hours.

The 6080A Associated 6 Amp Battery charger for "Flooded" or wet automotive and "Maintenance Free" batteries. Charge up to 36 Cells (6 batteries) in Series. New technology enables higher output voltage for charging new batteries and rejuvenating sulfated batteries. Fully charges six maintenance-free batteries at a time. Has an isolated transformer for better safety, plus circuit breaker protection. Includes five charging leads. Mounts on wall or bench

The series charger workhorse. Charges 2-60 cells from 0 to 6 amps. With state-of -the-art, anti-spark delay, voltage is shut off when current is interrupted, eliminating sparking.

Battery charging rack stores up to 15 batteries. Convenient three-shelf, heavy-gauge steel construction rack with 10 pairs of 400 amp charging leads. Insulated storage bars and connections ensure there are no live electrical connections. Shelves have durable 1/8" polypropylene sheet to protect from damage and are acid resistant. Use with Model 6065 and Model 6068 multiple parallel battery chargers.

611095 Associated Charging Jumper Cups (Each)

6366 Associated 4 x 20 Industrial Gang Charger for Standard Automotive, Deep-Cycle, AGM and Gel Cell Batteries - Fully-Automatic charging channels that control voltage and current up to 20 Amps per circuit. Four sets of LED indicators showing charging status by battery. Four sets of detachable 6 foot leads with 300 Amp heavy duty clamps. Charges all types of 12 volt batteries, AGM Batteries, Gel Cell Batteries, Sealed Batteries, Standard Flooded Batteries - including Spiral Cell, Orbital, or Optima batteries. Patented diagnostics indicate weak or defective battery.

The BPC-100 saves valuable labor with Fast Charging and option to charge up to 8 Batteries in a pack at once.

BUSPRO-360 Auto Meter 120 Volt 5 Amp 3 Station 12 Volt AGM Automotive Battery Charger - 110 volt BusPro-360 model multi-station 5 amp smart chargers that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specific.

BUSPRO-361 Auto Meter 110 Volt 10 Amp 3 Station 12 Volt AGM Automotive Battery Charger - 110 volt BusPro-360 model multi-station 5 amp smart chargers that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specific.

BUSPRO-600S Auto Meter 115 Volt 5 Amp 6 Station 12 Volt Automotive Battery Charger - BusPro Series chargers utilize individual transformers and microprocessors for both low and high volume battery charging applications. This allows each channel to work independently and charge the battery correctly and in a timely manner. The BusPro-600 has a 5 amp per channel maximum with a 115 volt AC input.

BUSPRO-620S Auto Meter 220 Volt 5 Amp 6 Station 12 Volt Automotive Battery Charger - BusPro Series chargers utilize individual transformers and microprocessors for both low and high volume battery charging applications. This allows each channel to work independently and charge the battery correctly and in a timely manner. The BusPro-620s has a 5 amp per channel maximum with a 220 volt AC input.

BUSPRO-660 Auto Meter 110 Volt 5 Amp 6 Station 12 Volt Smart Automotive Battery Charger - 110 volt BusPro-660 model multi-station 5 amp smart chargers that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specifically designed for the proper and safe charging and maintenance of AGM batteries which makes overcharge impossible.

BUSPRO-662 Auto Meter 220 Volt 5 Amp 6 Station 12 Volt Smart Battery Charger - 220 volt BusPro-662 model multi-station 5 amp smart chargers that are specifically optimized for use with AGM (Absorbent Glass Mat) Batteries. These completely automatic charging stations are ideal for fleets, shops, and parts stores due to the advanced new circuitry designs and controls specifically designed for the proper and safe charging and maintenance of AGM batteries which makes overcharge impossible.

DSR125 Schumacher Lithium 6/12 Volt 12 Amp 4 Bank Automatic Battery Charger. Completely Independent, Fully Automatic, Microprocessor-Controlled Charging Banks for charging 6V and 12V Standard, AGM and Lithium batteries, charge 4 different size batteries at the same time. The DSR127 Charger automatically to 10 amps output per bank with four detachable 6 foot cables with 75 Amp, color-coded clamps. A separate digital display for each bank provides charging data at a glance. Multi-stage charging algorithm provides safe efficient complete charging of batteries. Recovery Mode has been added to recover sulfated Standard and AGM batteries.

DSR127 Schumacher Lithium 6/12 Volt 12 Amp 8 Bank Automatic Battery Charger. Completely Independent, Fully Automatic, Microprocessor-Controlled Charging Banks for charging 6V and 12V Standard, AGM and Lithium batteries, charge 8 different size batteries at the same time. The DSR127 Charger automatically selects from 2 to 12 amps output per bank with Eight detachable 6 foot cables with 75 Amp, color-coded clamps. A separate digital display for each bank provides charging data at a glance. Multi-stage charging algorithm provides safe efficient complete charging of batteries. Recovery Mode has been added to recover sulfated Standard and AGM batteries.

The new 4-bank Battery Maintenance Station, Model No. PL4020, from SOLAR enables charging/maintaining of four batteries simultaneously. Combining fully automatic operation and the ability to properly charge most lead acid battery types, the PL4020 provides the precision, effectiveness and versatility needed to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. The PRO-LOGIX PL4020 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery serviced. Each channel is fully independent, so a problem battery on one channel does not impact the rest of the batteries under charge. This also allows charging of any combination of battery types across the four channels, as the battery type is selected uniquely for each channel.

The new 4-bank Battery Maintenance Station, Model No. PL4050, from SOLAR enables charging/maintaining of four batteries simultaneously. Combining fully automatic operation and the ability to properly charge most lead acid battery types, the PL4020 provides the precision, effectiveness and versatility needed to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. The PRO-LOGIX PL4020 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery serviced. Each channel is fully independent, so a problem battery on one channel does not impact the rest of the batteries under charge. This also allows charging of any combination of battery types across the four channels, as the battery type is selected uniquely for each channel.