OTC 3050E Noid Lite Test Kit - Noid Lites are a proven test device to quickly determine if the electrical signal is present at the fuel injector. Just plug in and turn over the engine; flashing noid indicates good signal.
OTC 3054E Noid Lite / IAC Test Kit - Simplest method for eliminating the EFI system or idle air control as possible faults on no-start vehicles. Disconnect the fuel injectors, plug in a Noid Lite, and crank the engine. A flashing light indicates normal pulsing voltage.
OTC 4546 Steering Wheel Holder & Pedal Depressor Kit - This kit has two applications: 1) holds steering wheel in position for alignment adjustments, and 2) depresses brake pedal for various brake checks, including brake lamp operation.
OTC 5060 Detroit Diesel Injector Socket - Used on GM 6.
Quick Disconnect 90° Elbow Fitting
Noid Lite F.I. (GM Multec 2)
OTC 6067 Ford Injector Remover / Installer Kit - Removes and installs injectors without damaging the injector or cylinder head. Application: 1994–2003 Ford 3/4- and 1-ton trucks, Super Duty trucks, and vans with 7.3L direct-injected turbocharged (DIT) diesel engine.
OTC 6087 GM Injection Pump Wrench Set - Use the GM Injection Pump Wrench Set to loosen or tighten injection pump retaining bolts whenever pump timing adjustment or pump service is required.
OTC 6266 Bosch 2 Noid Light
OTC 7342 Quick Coupler Adapter
OTC 7601 Ford TBI Noid Lite - Noid Lites are a proven test device to quickly determine if the electrical signal is present at the fuel injector.Just plug in and turn over the engine; flashing noid indicates good signal.
OTC 7602 GM PFI Noid Lite - Noid Lites are a proven test device to quickly determine if the electrical signal is present at the fuel injector.Just plug in and turn over the engine; flashing noid indicates good signal.
OTC 7608 Geo TBI Noid Lite - Noid Lites are a proven test device to quickly determine if the electrical signal is present at the fuel injector.Just plug in and turn over the engine; flashing noid indicates good signal.
OTC 7646A Ford Clutch Coupling Tool - Disconnects the hydraulic clutch line from the clutch slave cylinder on the following vehicles with manual transmissions and hydraulic clutches.
OTC 7666 Decarbonizing Adapter - Use with OTC 7448 fuel injection canister cleaner or no. 7800 fuel & intake maintenance system, and no. 7904 D-Karbonizer solution to remove carbon deposits in the intake system of most domestic and imports vehicles. Fitting accesses vacuum port used to get chemical into engine.
OTC 7667 GM Computer-Controlled Carburetor Tools - These are designed to adjust settings on computer-controlled Rochester, DualJet, QuadraJet, and VaraJet carburetors on carburated GM engines.
