View CartMy Account / Order StatusHelp

Join our mailing list!



(Your shopping cart is empty)
You are here: Home > Plasma Cutter Parts > 118-015 2050 Solar 50 amp plasma cutter

118-015 2050 Solar 50 amp plasma cutter



118-015 Replacement Parts List
Item No.
Part No.
Description
1
413-030-666
Wheel with Hub
2
413-048-666
Axle
3
412-329-016
Wheel Mounting Bracket
4
410-617-016
Base
5
412-328-016
Foot
6
880-181-666
10 Pin Wire Harness
7
880-139-666
9 Pin Wire Harness
8
880-102-666
Circuit Board
9
410-620-030
Front Panel
10
312-116-666
Nose
11
238-285-100
Torch Assembly
12
44050
O-Rings
13
44510
High Current Nozzles (5)
14
44160
Standoff
15
44530
Nozzle Cap
16
44500
Electrodes (3)
17
44520
Swirl Ring
18
238-228-666
Ground Cable Assembly
19
296-135-666
Thermal Overload Light
20
254-004-666
Regulator
21
251-003-666
Pressure Gauge
22
246-176-666
Run / Setup Switch
23
246-224-666
Knob
24
246-223-666
Power Switch
25
246-222-666
Amperage Selector Switch
26
246-206-666
Solenoid
27
252-004-666
Pressure Switch
28
246-199-666
Pilot Arc Relay
29
880-141-888
Transformer
30
880-106-888
Control Transformer 230 Volt AC to 20 & 24 Volt AC
31
244-080-666
Rectifier
32
254-005-666
Pre-Regulator (set at 105 PSI)
33
216-053-666
Thermostat
34
245-105-666
2 Ohm, 420 Watt Resistor
35
216-086-666
Fan Motor, 230 Volt AC
36
316-007-666
Fan Blade
37
410-629-016
Back Panel
38
248-178-666
Power Cord, 8/3, 8.5' with #10 Spade (2) & #10 Ring Terminals
39
246-165-666
Contactor
40
880-134-666
1.5 Ohm, 160 Watt Resistor
41
880-167-888
Reactor
42
412-332-110
Handle (Not Shown)
43
410-630-080
Cover with Access Panel (Not Shown)
44
410-530-020
Access Panel (Not Shown)
Sort By:
Page of 1
001-288-908 Plasma Torch Hand Grip (Trigger On Bottom)
001-288-908 Plasma Torch Hand Grip (Trigger On Bottom)
Price $45.38

001-288-908 Plasma Torch Hand Grip (Trigger On Bottom). Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B)
002-244-908 Plasma Torch Safety Trigger. Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B)
002-244-908 Plasma Torch Safety Trigger
Price $24.82

002-244-908 Plasma Torch Safety Trigger. Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B)
098-142-000 Synthetic Lubricant 1/4oz 4424
098-142-000 Synthetic Lubricant 1/4oz 4424
Price $19.18

Synthetic Lubricant for plasma torch O-rings
131-280-908 Century Torch Standoff Repl. 4416 / 44160
131-280-908 Century Torch Standoff Repl. 4416 / 44160
Price $53.85

Century / Solar Plasma Torch Stand-Off Kit keeps nozzle clear of dirt, paint and corrosion. Also simplifies cutting with straightedge or pattern. 131-280-908 TORCH STANDOFF Replaces 4416 / 44160.
216-082-000 Fan Motor With Leads 240 Volt
216-082-000 Fan Motor With Leads 240 Volt
Price $42.95

216-082-000 Fan Motor With Leads 240 Volt .20 amps C.W. shaft end. Replaces some older models. 216-086-000, 216-086-010, 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 316-007-300 for Fan blade.
216-086-666 Fan Motor W/ Leads 240 Volt
216-086-666 Fan Motor W/ Leads 240 Volt
Price $168.60

216-086-666 Fan Motor W/ Leads 240 Volt .55 amp C.W. shaft end rotation. Replaces 216-034-000, 216-034-100, 216-034-200, 216-034-666. See 216-082-000 as a possible replacement.
238-285-100 Plasma Torch Assembly
238-285-100 Plasma Torch Assembly
Discontinued See 238-456-000

238-285-100 Plasma Torch Assembly
238-285-999 Plasma Torch Head (Old Style Trigger On Top)
238-285-999 Plasma Torch Head (Old Style Trigger On Top)
Discontinued See 238-456-000

238-285-999 Plasma Torch Head (Old Style Trigger On Top) See 238-456-000 for new style with trigger on the bottom.
238-456-000 Plasma Torch 50 Amp 25 Foot With Safety Switch
238-456-000 Plasma Torch 50 Amp 25 Foot With Safety Switch
Discontinued

Plasma Torch 50 Amp 25 Foot With Safety Switch. OEM Torch Head hose assembly includes hose, torch head, o-ring, swirl ring, electrode, high current nozzle, nozzle cap. Replaces 238-285-000, 238-285-100.
238-456-999 Plasma Torch Head (New Style Trigger On Bottom)
238-456-999 Plasma Torch Head (New Style Trigger On Bottom)
Discontinued See 238-456-000

238-456-999 TORCH HEAD FOR 238-456-000, 50 Amp ,Replaces 238-285-000, 238-285-100. Used on 50-55 Amp Models 118-014 (YA5550), 118-015 (2050), 118-016 (82050,5Z031A, 5Z031B).
244-076-666 Discontinued See 244-080-666 Century Rectifier Plasma YA2230
244-076-666 Century Rectifier Plasma YA2230
Discontinued See 244-080-666

Discontinued See 244-080-666 244-076-666 Century Rectifier Plasma YA2230
244-080-666 Century Rectifier Plasma
244-080-666 Century Rectifier Plasma
Price $236.48

244-080-666 244-076-666 Century Rectifier Plasma
245-105-666 Century 2 Ohm 420 Watt Resistor
245-105-666 Century 2 Ohm 420 Watt Resistor
Price $167.79

245-105-666 Century 2 Ohm 420 Watt Resistor comes with mounting brackets, insulators and mounting harware.
246-199-666 Pilot Arc Relay 24 Volt DC Coil
246-199-666 Pilot Arc Relay 24 Volt DC Coil
Price $69.95

246-199-666 Pilot Arc Relay 24 Volt DC Coil
252-004-666 Century Switch, Air Pressure Service
252-004-666 Century Switch, Air Pressure Service
Price $84.03

252-004-666 Century Switch, Air Pressure Service
254-004-666 Century Heavy Duty Regulator
254-004-666 Century Heavy Duty Regulator
Price $106.01

254-004-666 Century Heavy Duty Regulator
254-005-666 Century Pre-Regulator (set at 105PSI)
254-005-666 Century Pre-Regulator (set at 105PSI)
Price $110.18

254-005-666 Century Pre-Regulator (set at 105PSI)
312-067-666 Foot Molded
312-067-666 Foot Molded
Price $10.50

FOOT MOLDED
312-114-000 Handle Both Sides
312-114-000 Handle Both Sides
Price $45.05

Plasma Torch Handle Assembly, no hardware included. Molded handles only
316-007-300 Fan Blade 7.12" CCW
316-007-300 Fan Blade 7.12" CCW
Price $13.79

316-007-300 Fan Blade 7.12" CCW
316-007-666 Fan Blade 7.12" CCW
316-007-666 Fan Blade 7.12" CCW
Discontinued See 316-007-300

316-007-666 Fan Blade 7.12" CCW
334-274-100 Trigger Assembly Replaces 334-281-100
334-274-100 Trigger Assembly Replaces 334-281-100
Price $34.10

334-274-100 Trigger Assembly Replaces 334-281-100
334-287-908 Electrode Plasma 50 Amp 3 Pack Repl. 4450 44500
334-287-908 Electrode Plasma 50 Amp 3 Pack Repl. 4450 44500
Price $21.85 3 Pack

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.
334-287-908L Electrode Plasma Extended 50 Amp 3 Pack
334-287-908L Electrode Plasma Extended 50 Amp 3 Pack
Price $26.85 3 Pack

Century / Solar Style Electrode. Plasma Cutting Electrodes initiate the high intensity cutting arc and provide the contact necessary for arc maintenance. Electrodes are subject to wear, causing arc to weaken or be intermittent.
334-288-908 Swirl Ring Plasma 50 Amp Repl. 4452 44520
334-288-908 Swirl Ring Plasma 50 Amp Repl. 4452 44520
Price $26.50 Each

Century / Solar Style Plasma 50 Amp Swirl Ring. Swirl Ring imparts a swirling current to stabilize the arc. Keep your plasma cutter working at peak performance with these replacement parts.
For plasma torch 238-285-100 or 238-456-000. The 334-288-908 replaces 4452, 44520, 334-288-000, 334-288-100, 334-288-500. Used on Century made model numbers: 118-014 (YA5550), 118-015 (Solar 2050, 2050C), 118-016 (82050, 5Z031A, 5Z031B)
334-289-908 Nozzle Plasma High Current 50amp 5pk Repl. 4451 44510
334-289-908 Nozzle Plasma High Current 50amp 5pk Repl. 4451 44510
Price $26.95 5 Pack

Century - Solar Style 50 Amp High Current Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).
334-289-908L Nozzle Plasma High Current Extended 50amp 5pk
334-289-908L Nozzle Plasma High Current Extended 50amp 5pk
Price $32.95 5 Pack

High Current Extended Plasma Nozzles 50amp 5pk. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).
334-290-908 Nozzle Cap Plasma 50amp Extended Type Repl.  4453 44530
334-290-908 Nozzle Cap Plasma 50amp Extended Type Repl. 4453 44530
Price $15.85 Each

Century / Solar Style Nozzle Cap, Extended Type. Nozzle Caps direct cooling air flow to the nozzle and workpiece.
334-295-908 Nozzle Plasma Low Current 50amp 3pk Repl. 4454 44540
334-295-908 Nozzle Plasma Low Current 50amp 3pk Repl. 4454 44540
Price $24.95 3 Pack

Century - Solar Style 50 Amp Low Current Plasma Cutting Nozzles. The Plasma Cutting Nozzle controls arc for smooth cutting. When Purchasing a pair of Nozzles and nozzle caps, they must be the same style and amp rating (i.e. tapered, 15/20 amp).
512-087-908 O-Rings 20/40 15 20 50 Amp 2 pack Repl. 4405 44050
512-087-908 O-Rings 20/40 15 20 50 Amp 2 pack Repl. 4405 44050
Price $3.32 2 Pack

Century / Solar Package of 2 O-Rings for 20/40, 15, 20 and 50 amp plasma cutters. The rubber O-Ring prevents air leaks which cause erratic cutting and cooling.

880-102-666 Century Printed Circuit Board
880-102-666 Century Printed Circuit Board
Price $269.55

Century Plasma Cutter Printed Circuit Board. Controls The Pilot Arc Relay, 24 Vdc Solenoid, Trigger, Pressure Switch, 24 Vac main contactor coil, 24 Vdc pilot relay coil.
880-134-666 Century 1.5ohm, 160 Watt Resistor
880-134-666 Century 1.5ohm, 160 Watt Resistor
Price $73.77

880-134-666 Century 1.5ohm, 160 Watt Resistor
Solar 2050 50 Amp Plasma Cutter Owners Guide Instruction Manual
Solar 2050 50 Amp Plasma Cutter Owners Guide Instruction Manual
Price $8.00

This Operators manual provides specific charger information for your specific model. This manual contains information such as the Important Safety Instructions, Usage and Maintenance of your Plasma Cutter. This document is provided as a download PDF format. We suggest you save it to your computer for future reference.
Model Coverage: 2050, 118-015-901
   
 
118-015 2050 Solar 50 amp plasma cutter
Century Tool & Equipment
4013 S. Old Hwy 94
St. Peters MO 63304
 About Us
 Let Us Repair It
 Privacy Policy
 Send Us Feedback