|
Schumacher 1050-PE Troubleshooting Guide
|
|
The battery charger is designed to work automatically. However,
if a problem does occur, check the following:
|
|
PROBLEM
|
POSSIBLE CAUSE
|
SOLUTION
|
|
No meter
reading
|
Clips not making good contact
|
Rock clips back and forth for a
better connection.
|
|
Charger
will not turn on when properly connected.
|
AC outlet is dead.
|
Plug
in a known working lamp to check for voltage.
|
|
Poor
electrical connection
|
Check connections rock clips
back and forth.
|
|
Noise
from charger even when not connected to a battery.
|
Transformer Hum.
|
Normal condition no solution
necessary Charger is okay.
|
|
Clicking noise from charger.
|
Circuit breaker cycling.
|
May be in the wrong position.
|
|
Battery
is defective.
|
Have battery checked.
|
|
Severely
discharged batter but otherwise a good battery.
|
Allow charging to continue until
battery has a chance to recover sufficiently ot take a charge. If more than
20 minutes, stop charging and have battery checked.
|
|
Reverse
Battery connections.
|
Shut off charger and correct
lead connections.
|
|
Schumacher User Manual Link
|
