246-041-666 Universal Selector Knob
246-041-666 Universal Selector Knob with set screw for controls with 1/4" Stem. Replaces all knobs with 1/4" diameter shaft. Fits 1/2 shaft and 3/4 style shaft stems.
61468144 Marquette Voltmeter Testmeter Horizontal 6-12 Volt Test Scales
61468144 Marquette Voltmeter Testmeter Horizontal 6-12 Volt Test Scales. 4-3/4" Wide X 4-1/8" Tall. Volt Meter 0-16 DC Volts, Display reads Battery condition, State Of Charge, Alternator & Regulator Test, connection terminals are Male threaded posts, includes lock nuts and washers. 4 Screw mount. Hardware included.
Discontinued
62467020 Marquette Bayonet Type 1/4" x 1-1/4" Fuseholder
62467020 Marquette Bayonet Type 1/4" x 1-1/4" Fuseholder.Fuseholder Bayonet Type Cap 1/4" x 1-1/4" Fuseholder. 1-Pole Glass and Ceramic Fuse Holder, AC: 250VAC, DC: 125VDC. This vibration-resistant fuse holder is for use with 1/4" x 1-1/4" and 6.3mm x 32mm fuses. It features a bayonet-type knob.
62777476 Marquette 2 Position Slide Switch
MQ62777476 Marquette 2 Position Slide Switch DPDT 6 terminals. 3 Amp 125 Volt AC 1.5 Amp 250 Volt AC. 1.125" mounting hole centers. Clear movement for rivet or screws.
63673696 Marquette 120 Minute Electronic Timer with Knob Upgrade Kit
120 Minute Electronic Timer with Knob. The timer controls battery charging in timed Mode and has a manual hold mode for longer charging cycles. Switch circuits are rated 15 amperes. Termination is designed to accept standard 1/4" spade terminals. Includes a Instruction sheet for various models, Timer, 120 Minute 120Vac electric motor, Mounting Screws, #6 x 5/16” long, Decal, 120 Minute Horizontal Mounting and a decal, 120 Minute, Vertical Mounting, Pointer knob with spring clip and wire nuts and cable ties to tidy up the install.
65357369 Marquette Knob
65357369 Marquette Knob For 1/4" OD Shaft switches and timers. Has Set Screw For 1/2-D & 3/4-D Shaft Switches and timers. (653-57369)
Discontinued See 246-041-666
B7003914 Marquette Horizontal Voltmeter Charge Indicator
B7003914 Marquette Horizontal Voltmeter Charge Indicator features easy snap-in installation, no tools required. Displays Battery charge level scale, battery volts 0-18 Volts DC, battery condition meter, alternator test Lo Normal High Scale. 1/4" Spade Terminal Connections make installation a snap.
Discontinued
B7039999 Marquette Rectifier 12 Diode (Positive Out)
B7039999 Marquette Rectifier 12 Diode (Positive Out) Center Mount replaces older open wire type and selenium plate type rectifiers, Positive Plate. Replaces B7057950 Open wire type 12 diode rectifier or B7207950 6 Diode rectifier. Includes rectifier, mounting hardware and instructions for typical installation.
Discontinued See 865-682-666
M245369 Marquette 2 Hour Mechanical Timer
Universal Mechanical 2 Hour Timer. Mechanically controls charging in timed Mode. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept Quick Disconnect terminals. Replaces older mechanical timer. (Old Knob will not fit this timer)
Discontinued see
TJ1-120MHB