| IR 2080 1" Drive Parts List | |||
| Item | PartNumber | PartDescription | IREquivalent |
| 1 | Handle | 2080-92 | |
| 2 | 9224 | Handle Bolt (4) | 2080-638 |
| 3 | Trigger | 2080-93 | |
| 4 | Trigger Pin | 534-265 | |
| 5 | Plug | 2080-34 | |
| 6 | Plunger Pin | 2080-120 | |
| 7 | Cap | 2080-95 | |
| 8 | Trigger Plunger | 2080-94 | |
| 9 | Inlet | 2080-465 | |
| 10 | 8627 | O-Ring | R4-210 |
| 11 | 8628 | Screen | 834-61 |
| 12 | 8629 | Spring | 2080-51 |
| 13 | 8104 | Throttle Valve | 2921-302 |
| 14 | 8208 | Throttle ValveSeat | DG230-303 |
| 15 | Reverse Lever | 2080-658 | |
| 16 | 9720 | Reverse LeverSpring | 2080-278 |
| 17 | 8184 | Snap Ring | 2161-28 |
| 18 | 8182 | Grease Fitting | R1-188 |
| 19 | 8588 | Handle Gasket | 2161-739 |
| 20 | 8186 | Motor ClampWasher | 2161-207 |
| 21 | 8038 | Rear RotorBearing | 4E-510 |
| 22 | 8825 | Rear End Plate | 2161-12 |
| 23 | 8171 | End Plate Dowel | 2920-74 |
| 24 | 9109 | Rotor | 2080-53 |
| 25 | 2199 | Rotor Vane(requires 7) | 2925-42-7 |
| 26 | Cylinder | 2925-3 | |
| 27 | 9469 | Cylinder Dowel(2) | JC3350-538 |
| 28 | 8824 | Front End Plate | 2161-11 |
| 29 | 8037 | Front EndBearing | 834-24 |
| 30 | 8868 | Motor Housing | 2925B-A40 |
| 31 | Warning Label | WARNING-2-99 | |
| 32 | 8188 | Reverse Valve | 2161-329 |
| 33 | 8860 | O-Ring | 023446 |
| 34 | 9329 | Housing O-Ring | C321-606 |
| 35 | 8658 | Exhaust Cover | 2080-123 |
| 36 | 8659 | Exhaust CoverSnap Ring | 3CS5492-28 |
| 37 | 8660 | Muffler | 2080-310 |
| 38 | 9357 | Hammer FrameWasher | 2161-706 |
| 39 | 8260 | Hammer Frame | 2925-703 |
| 40 | 8416 | Hammer Pin (2) | 2910-704 |
| 41 | 8694 | Hammer (2) | 2925-724 |
| 42 | 9692 | Anvil for 2080(standard length) | 2080-A726 |
| 8791 | Anvil for2080-6 (6" extended length) | 2080-A826-6 | |
| 43 | 9578 | SocketRetainer O-Ring | BBFM-557 |
| 44 | 8661 | Socket Retainer | 910E5-918 |
| 45 | 8589 | Hammer Case Gasket | 2161-36 |
| 46 | 8190 | Hammer Case Assembly for 2080 | 2161-A727 |
| Hammer Case Assembly for 2080-6 | 2080-A727 | ||
| 47 | 9433 | Hammer Case Bushing for 2080 | 2161-641 |
| Hammer Case Bushing for 2080-6 | 2080-641A | ||
| Auxiliary Handle Assembly | 2080-A48 | ||
| 48 | Auxiliary Handle | 2080-48 | |
| 49 | Bolt (2) | 2080-49 | |
| 50 | Strap | 2080-364 | |
| * | 9995 | Tune-up Kit (includes parts 10, 11, 12, 13, 14, 19, 21, 25, 29, 33, 34, 37,43, 44 & 45) | 2080-TK1 |
