| Index No. | Part No. | Description | No. Req'd |
| A | 2050542053 | Air Inlet Kit | - |
| 1 | - | Adapter complete 1/4" | 1 |
| 2 | - | Silencer | 1 |
| 3 | - | O-Ring | 1 |
| B | 2050542063 | Throttle Kit | - |
| 4 | - | Spring valve | 1 |
| 5 | - | Tube inlet | 1 |
| 6 | - | Throttle valve | 1 |
| 7 | - | Seat valve | 1 |
| C | 2050542073 | Lever Kit | - |
| 8 | - | Throttle lever | 1 |
| 9 | - | Pin | 1 |
| 10 | - | Pin | 1 |
| D | 2050542083 | Rear Plate Kit | - |
| 14 | - | Ball bearing | 1 |
| 15 | - | Rear end plate | 1 |
| E | 2050542093 | Front Plate Kit | - |
| 19 | - | Front end plate | 1 |
| 21 | - | Ball bearing CP3019-.. | 1 |
| 20 | - | Collar rotor | 2 |
| F | 2050542103 | Motor Kit | - |
| 12 | - | O-Ring | 1 |
| D | 2050542083 | Rear plate kit | 1 |
| E | 2050542093 | Front plate kit | 1 |
| 16 | 400.134 | Cylinder | 1 |
| 17 | 434.55 | Blade | 3 |
| 18 | 426.92 | Rotor | 1 |
| H | 2050542113 | Collet Holder Kit | - |
| 25 | - | Chuck-collet | 1 |
| G | 2050541413 | Collet clamp kit | 1 |
| I | 2050542123 | Coupling Kit (CP3019-..ES) | - |
| 29 | - | Fork coupling (CP3019-..ES) | 2 |
| 30 | - | Spacer (CP3019-..ES) | 1 |
| 31 | - | Cross coupling (CP3019-..ES) | 1 |
| J | 2050542143 | Front Cap Kit | - |
| 24 | 672.142 | Front cap | 1 |
| 28 | 225.46 | Front cap protection | 1 |
| K | 2050542153 | Extension Kit | - |
| 32 | 666.157 | Sleeve spacer (CP3019-..ES) | 1 |
| 33 | 758.114 | Ball bearing (CP3019-..ES) | 3 |
| 34 | 501.77 | Spindle extension (CP3019-..ES) | 1 |
| 35 | 566.459 | Housing extension (CP3019-..ES) | 1 |
| L | 2050542163 | Flat Wrench Kit | - |
| 53 | 6158010030 | - | - |
| 54 | 6158010320 | - | - |
| - | |||
| 11 | 2050542193 | Motor housing kit | 1 |
| 13 | 457.25 | Govenor (25,000 rpm) | 1 |
| 13 | 457.26 | Govenor (31,000 rpm) | 1 |
| 13 | 457.27 | Govenor (40,000 rpm) | 1 |
| 13 | 457.28 | Govenor (20,000 rpm) | 1 |
| 13 | 6154570450 | Govenor (18,000 rpm) | 1 |
| 26 | 225.45 | Bit holding gap | - |
| 27 | 607.143 | Nut | - |
| 51 | 6155260590 | Resilient collet series 300 | 1 |
| 55 | 6157040190 | 1/4" air hose nipple for 8mm IDhose | 1 |
| 56 | 6158751060 | Exhaust hose (L=31") | 1 |
| 100 | 6158726110 | Warning label | 1 |
| 22 | 523.20 | Chuck collet | - |
| 23 | 672.138 | Front cap | - |
| 50 | 6155260460 | CNOMO collet | - |
| - | 2050542133 | Tune-up Kit (incl 2, 12, 17, 9, 10, 21, 33) | 1 |
