068-013-666 Century 3/8" Axle End Cap, for 3/8" Axles

115 Volt Fan Motor Open Frame Design. Clock Wise Shaft End, mechanically reversible for universal applications.

8' 6AWG Welding Wire Lead Set with heavy duty polished clamps featuring coated clamp handles. a 50 lb. Jaw Strength provides positive connections and color coded wires make for easy identification. These even have molded strain relief built on the cables. Ring terminal connections make installation a snap.

246-041-666 Universal Selector Knob with set screw for controls with 1/4" Stem. Replaces all knobs with 1/4" diameter shaft. Fits 1/2 shaft and 3/4 style shaft stems.

246-107-666 Century Knob 1-1/2" Round 1/4" Stem Diameter Black Plastic. Replaces 246-140-666

Circuit Breaker, Open construction, automatic reset, no terminal Hardware

Mechanically controls charging in timed Mode with manual hold mode. 2 hour. Single Pole Double Throw (SPDT) Switch rated 15 amperes. Termination is designed to accept 1/4" spade terminals.

Switch Three Position Double Pole Triple Throw (On-Off-On) 15 Amp Rating 1/4 Quick Connect Terminals.

Horizontal ammeter with a 0-60 amp range and a red high amp zone for boost or start. Easy snap in installation with "Wire-Through" induction pick-up on the back. Lamp sockets (red / green indicators) for battery charge and polarity indicators.

247-134-666 Voltmeter 0-20 Volts Horizontal With Test

248-002-666 Power Cord With Strain Relief (1580)

248-195-666 Power Cord With Strain Relief

248-312-000 Power Cord 16/3 AWG SJTOW 88" 1/4" Spade Terminals, Ring Terminal Ground.

316-014-000 Fan Blade 6" 4 Blade CW

412-751-666 Chrome Battery Charger Handle. Replaces 442-020-166 and other older Century / Solar Handles

413-043-666 Universal Axle Kit With Hubs (15.3/4" Long 3/8" Diameter)

442-020-166 Century Battery Charger Handle. Flat side black painted finish.

51-236 Goodall 250 Amp Heatsink Rectifier Kit 60 Amp Continuous Duty, 12 Diode Daisy Wheel Design. Extra Long center studs for thick transformer lead wires.

512-127-000 Rectifier Insulator Standoff. Connects to the back wall of the charger chassis to provide a mount for the rectifier.

865-682-666 Heatsink Rectifier.  Product as pictured.  Does not include any mounting hardware (512-127-000).

865-804-666 Control Board Assembly, includes board with potentiometer and led indicators mounted. Board and switch cannot be sold separately, if your switch stem is broken, you must buy a complete board assembly.

865-932-666 Voltmeter 0-20 Volt Range Horizontal With Board for volt test

TJ1-120MB Universal Mechanical 2 Hour Timer With Finish Bell. Mechanically controls charging in timed Mode, has "Hold" for manual un-timed charging. Single Pole Single Throw (SPST) Switch rated 15 amperes. Termination is designed to accept 1/4" Quick Disconnect terminals. Includes mounting screws. Replaces many older mechanical timers.