|
|
|
|
PSC550S Midtronics Power Supply Battery Charger
Fully Automatic, Regulated DC output 30 Amps, internal breaker and on/off switch and case
Midtronics PSC Power Supply Chargers provide clean, reliable power for charging and maintaining battery state-of-charge. These chargers/maintainers are designed for use during service reflashing, complex maintenance, or on the showroom floor where vehicle demonstrations can make significant demands the battery. In power supply mode, the PSC converts 120 volt AC line input into a virtually noise-free, nominal 13.4 volt DC output. In battery charger mode, the PSC delivers current up to the rated value for charging any voltage-depressed 12 volt lead-acid battery. Once fully charged, the PSC detects battery condition and tapers current output to to sustain accessory loads or offset any parasitic drain.
PSC POWER SUPPLY CHARGERS |
PSC-150 |
PSC-300 S |
PSC-550 S |
Power Supply Voltage Regulation |
13.4 V |
13.4 V |
13.4 V |
Maximum Amps Output at Regulated Voltage |
15 A |
30 A |
55 A |
On/Off Switch |
|
Yes, with Power LED indicator |
Yes, with Power LED indicator |
Fuse Protection |
External |
Internal Breaker |
Internal Breaker |
3-Stage Charge Controller |
Yes |
Yes |
Yes |
Removable Cable Set |
Clamps and Installable Ring Terminals |
6’ Clamp Set |
6’ Clamp Set |
Soft Protective Carrying Case |
Optional |
Optional |
Optional |
Warning: This product may expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
|
|
|
|
|
|