Automotive tools & equipment

HVAC & Industrial supplies

Sales - parts -service


  Home > Air Conditioning Equipment > Combustion & Enviromental Analyzers >

707 TPI Carbon Monoxide Analyzer W/Soft Carrynig Case Flue Probe Batteries

707 TPI Carbon Monoxide Analyzer W/Soft Carrynig Case Flue Probe Batteries
 
Price $348.70


Product Code: TPI707
Qty:

Description Prop65
 

TPI 707 Carbon Monoxide (CO) Analyzer - Use the 707 to measure CO levels in the flue and test ambient CO levels in home and office spaces. Hand held and easy to use. The TPI 707 combustion analyzer uses a state of the art electrochemical sensor. This sensor technology provides the longest lasting, most accurate and reliable means for performing tests. The sensor in your analyzer will need to be replaced periodically and calibration is recommended once every year. The 707 will remind you when calibration is due by flashing “CAL DUE Err” for three seconds at start up if the date of calibration is one year or older.

Electrochemical sensors by nature are always active. Therefore the time the analyzer is off and not being used must be taken into account when determining sensor life. The sensor in your analyzer is warranted for two years. This warranty does not cover a sensor damaged through misuse of the analyzer.

Product Features

Test flue gasses at home or office spaces for the presence and location of CO leaks. With a protective rubber boot, the new 707 fits comfortably in your hand and operates with the push of a button.

The TPI 707 Carbon Monoxide Analyzer is a state of the art, easy to use analyzer designed to display carbon monoxide levels in and around appliances and work / living spaces. The instrument is ruggedly constructed and comes with a 3 Year unit and 2 Year sensor Guarantee.

  • Pump driven
  • Pump flow block indicator
  • 1 ppm sensitivity
  • Auto zero
  • Clear and fast response with advance pump driven technology
  • Peak Hold to capture peak CO reading
  • Instrument recycles and will not shut off if 15ppm CO is present, increasing safety
  • Store Button allows you to save up to eight readings and then print using the IR port and optional A740 printer
  • 1 ppm sensitivity
  • Measures up to 10,000ppm
  • Push on fittings are fast and easy to use
  • Large easy to read backlit display
  • Advanced electrochemical sensor is field replaceable and calibrateable
  • Protective rubber boot and soft carrying case with shoulder strap is included

Model 707 Applications:

  • Ambient CO safety checks
  • Checking flue gasses at home or office spaces for the presence and location of carbon monoxide

Don’t expose yourself to Carbon Monoxide!

Review the list below for the maximum allowable exposure limits and symptoms developed with CO inhalation.

9ppm: The maximum allowable concentration for short term exposure in a living area according to ASHRAE

50ppm: The Federal OSHA standard for continuous exposure in any eight hour period.

200ppm*: Maximum concentration allowable any time according to OSHA. Slight headaches, fatigue, dizziness, nausea after 2-3 hours.

400ppm*: Frontal headaches within 1-2 hours, life threatening after 3 hours. Maximum allowable limit in flue gas according to EPA and AGA.

800ppm*: Headache, dizziness, nausea, and convulsions with 45 minutes. Unconsciousness within 2 hours. Death within 2-3 minutes.

1600ppm*: Headache, dizziness, and nausea within 20 minutes. Death within 1 hour.

3200ppm*: Headache, dizziness, and nausea within 5-10 minutes. Death within 30 minutes.

6400ppm*: Headache, dizziness, and nausea within 1-2 minutes. Death within 10-15 minutes.

12800ppm*: Death within 1-3 minutes.

* With exposure to this concentration and higher the effects can vary depending on size, age, sex, and health.


Model 707 Specifications
Carbon Monoxide (CO) Measurement Range 0 – 9.999%
Accuracy ±5ppm or 5% of reading whichever is greater
Resolution 1ppm
Data Storage Yes
Time/Date Stamp of Stored Data Yes
IR Printer Port Yes
Flue Probe Yes
Internal Pump Yes
Combustible Gas Leak Detection No
Backlight Yes
Alarm Audible
Power Supply 1.5V AA (3)
Dimensions 3.75”x 8” x 3” (95 x 303 x 76 mm)
Weight 1.1lbs (500g)
Warranty 3-year limited warranty 2-year sensor warranty

Accessories for this product...
A794F TPI Replacement Particle Filter For A794 And A795 Water Trap (Package Of 5) A740 TPI Infrared (IR) Printer A794W TPI Replacement Water Filter For A794 And A795 Water Trap
Price $17.30

Add
Price $173.55

Add
Price $17.30

Add
A794F TPI Replacement Particle Filter For A794 And A795 Water Trap (Package Of 5) A740 TPI Infrared (IR) Printer A794W TPI Replacement Water Filter For A794 And A795 Water Trap


Browse for more products in the same category as this item:

Air Conditioning Equipment > Combustion & Enviromental Analyzers
Multimeters & Test Instruments
Air Conditioning Equipment > Combustion & Enviromental Analyzers > CO Analyzers, Ambient CO & Combustible Gas